WLSE 2.9 and WDS AP's stuck in "Security Keys Setup"
Hey all,
I had to rebuild a WLSE, did a restore from a 2.9 CD. Restore went great, rediscovered all the devices. I am not however getting any rogue or adhoc detection.
I've found that all the WDS servers are stuck in "Security Key Setup". I've tried rebooting all the WDS servers, even the WLSE several times.
I believe that there must be some kind of key mismatch now between the WDS servers and the WLSE.
The usernames and passwords without a doubt match. It is however possible that during the rebuild setup of the WLSE that not all the same information was entered, ie domain name etc.
Does anyone know how to flush the AP's to try and negotiate a new key with the WLSE appliance?
I've tried "clear wlccp nm" and "clear wlccp ap"
Any ideas?
Thanks,
-Brian
Hey all,
Just an update for everyone.
"Security Key Setup" is a good thing, it means the WDS's have registered with the WLSE, so I was barking up the wrong tree there. I thought it meant it was trying to establish the keys.
After some more research I found my problem. Radio Monitoring was not enabled on the WLSE. I reconfigured it and everything is working great now.
Hope this helps someone.
Take care,
-Brian
Similar Messages
-
Help wlse wnm status authenticated but not security keys setup
Hi all, i have a WLSE 2.15.2 and AP 1100 12.3(JEB), the state of the AP NM status is authenticated instead of security keys setup, they know because can be?, by this razon apparently does not send the AP the messages of RM to the WLSE, thanks.
Can you try to Enable *all* radio interfaces so that they're "up" in the "show ip interfaces brief" and then redo the inventory on the WLSE. Leave them up until the wlccp link comes to "SECURITY_KEYS_SETUP". Once it comes to that state, you can shut down the radio interface.Even after a reload, the SECURITY_KEYS_SETUP will remain.To expedite the process, run a Discovery job on the AP.
-
Tried to restore my ipod classic on a windows computer... there was some sort of failure and it is now stuck in "disk mode." The ipod is no longer being recognized by itunes.
I am having the exact same problem. My ipod has been stuck in disk mode for over two hours and now itunes is frozen.
-
I was editing photos and it was getting stuck or frozen and working very slowly. I attempted to restart the computer but it would not allow me to quit aperture. Now aperture appears in my toolbar but will not open up so I can work on any photos. Any ideas?
Did you try opening from the Applications folder?
Depending on how far that gets you, I would also take a look at the Troubleshooting Basics. -
Syncing iphone and now phone is stuck and wont power off or do anything
syncing iphone and now phone is stuck and wont power off or do anything
Reboot the phone: hold down the power button and the home button at the same time until you see the Apple logo. Ignore the "slide to shut down". When the screen has been completely black for a few minutes, press the power button again.
-
My iphone5 was accidentally disconnected while updating OS8.2 in my MacBook Pro and now it's stuck with an apple logo on its screen and won't turn on or off. What should I do?
Connect to iTunes and restore. If you have difficulty, you may have to put the device into Recovery Mode. See the instructions in this support document. If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
-
iCloud backup is unable to access my account, because email I used for iCloud account is been deleted. And my iPad is stuck with this note on a screen, can't go Settings. How do I delete or edit my iCloud account?
You can eirther I think go on ITunes or if you can get to settings you would just go to iCloud.
-
Tried to upgrade my iPhone 4 to 5.1 and now it is stuck in "plug into itunes mode" but will not recover when I plug it in. It is coming up as "unkown error (1)". Is there anything I can do?
Also, is there any way to recover pictures I have not yet backed up? They should be on iTunes, but do not show up when I plug the phone in or otherwise.
Is there any hope in saving this phone or is my best bet contacting Verizon or Apple to overnight me a new one?From iPhoneWiki:
Try changing the USB port (the back one of chassis is better) and restart computer.
The installed version of iTunes may also be too old. Update iTunes.
Also put your iPhone in DFU mode when doing the above and restore. It's a software error. -
iPhone 3G plugged into PC(Windows 7) 'USB is Not Recognized' and unable to restore; stuck on 'Connect to iTunes'
I was in the process of putting another firmware for my iPhone(an .ipsw via. itunes) and the house had a power cut. The computer was in the middle of restoring the iPhone but never finished. The apple logo came on and then came onto the 'connect to itunes' screen. My sim card was in but there is no option to slide for emergency. When I Plug it into my computer, a message pops up saying that the 'USB Device Not Recognized', I've tried to plugging my iPhone into my laptop and other Computers but the same message occurs (all windows 7). Other articles say that the error is with the iPhone, I need help!! Can anybody offer some advice on what to do?
oh yeah, bit tight so not willing to spend any money;-)Apple support:
Network Printer Troubleshooting
Reset Printing System -
Downloaded a movie from iTunes to my iPad. 2 minutes into the movie it stopped and My Videos is stuck in black screen mode. So basically rented a movie and never watched it.
The EXACT same thing happened to me last night! Rented a movie; it had barely started and then froze. When I touch the video app icon, all I get is a blank, dimly lit screen. None of the other videos I own will display either. Was your problem ever resolved?
-
My on and off button got stuck is there any way to fix it?
I have a Ipod Nano 6th Gen and i was just laying down listening to music when i tried to shuffle it by double clicking and the button got stuck. I just want to know if there is anyway to get it unstuck or will i have to get another one.
I had the same problem with my iPod touch 4th gen.
1. Reset
You can hold the on/off button and the home button at the same time. Don't release until the screen goes black and the apple logo appears. After doing this it should restart your iPod completely.
But depending on the screen problem, this may or may not work.
If the first solution doesn't work, then try this:
2. Restore
You can restore it to factory settings if you sync it with your computer.
If you can do this (sync with your iMac) then when you plug it in, go onto iTunes, and when it reconnizes your device it should have a section on the sidebar that says "iPod touch". Click on that, then click "restore iPod". It may confirm it and you will probably have to enter your Apple ID.
***Beware that with this method, all the data on your iPod will be lost***
If this does not work, and your device is now restored, don't worry, you can get the data back and your iPod will be as normal.
I hope this helps, sorry for any spelling errors, I'm only 13
Happy New Year, and hopefull you can get your iPod fixed!! -
The product that I purchased is not working!!!! I need help and I've been stuck in your "Contact us loop" for the last few days and I'm getting frustrated. How do I contact you for HELP!
Probably the best place to start is the right forum for your product. This is the forum for Distiller Server, a long dead product used by big companies, and probably not what you have. If you can't find the right forum, please let us know the FULL name of what you paid for (please check your invoice, as Adobe have many similar products), and we can perhaps direct you. Good luck!
-
I need help my computer isn't working and there is no was to get on my iTunes and I just updated my phone and now it's stuck on where it shows the plug connected to iTunes help!!!!
There is no other way than to plug into a computer to restore the phone. You can use another computer to do so, but in case you did not back up to iCloud your data and settings will be gone.
Follow this article to connect in recovery mode:
iOS: Unable to update or restore -
I'm trying to update my daughter's Ipad2 to the new IOS 8 and it's got stuck on the connect to ITunes display. We don't have a computer to connect it to and it's never been connected to one. How do I get past this?
You can try a soft-reset of pressing and holding both the home and sleep buttons for 10 to 15 seconds so that it reboots, but you are likely to get the same screen. If it does then it will need to be connected to a computer's iTunes so that it can be reset back to factory defaults - do you have a friend with a computer with iTunes installed on it, or is there an Apple store nearby that you could try going to (if there is then preferably make a Genius Bar appointment at it, or don't go at a busy time) ?
Has she been backing up to the cloud ? If she has then she should be able to restore to that. If not then what she can redownload for free from the stores will show in the Purchased tabs in the store apps. -
My app store and itunes store are stuck in Japanese store. I already moved to the Philippines for about a year ago and my stores still won't change its location.
I already changed the region/country in my apple id. I tried to sign out and sign in back to my account. Tried it in app store, in itunes store, in settings app, in itunes in my laptop, in the apple website. It shows that my apple id is already set to Philippines, no matter where I sign in my account.
The problem is when I open my app store (or itunes store) in my iphone, it appears that it is in the Philippines store; however, when I sign in my account (and I tried to sign in everywhere), I cannot download any app from the Philippine store. When I try to download an app, it always says "Account not in this store. Your account is not valid for use in the Japanese store. You must switch to the Philippines store before purchasing." I have read everywhere and most of the answers say that it should automatically direct me to the correct store. It doesn't happen to me, apparently.
I have the same problem in both my iPhones. Both are iPhone 3GS and in version 5.1.1. I don't want to upgrade to iOS6 so please don't tell me to do so. Thanks!try logging out of of store and then log in again
and check this out
http://support.apple.com/kb/HT1311
Maybe you are looking for
-
Syncing iPhone4 to Windows Media Player
Hello: I am unable to sync my iPhone 4 to Windows Media Player: 1. WMP will not recognize my iphone as a device. Please advise, Ed
-
RFC2WS sync - dont see the responce from WS in the xmb_moni
hello experts I know that a respond is send, but I can not see it in the sxmb_moni. in the RWB I recieve this erros SOAP: response message contains an error Application/UNKNOWN/APPLICATION_ERROR - application fault Delivery of the message to the appl
-
Hi all, At present we have in our data source the quality source system of (R/3) mapped to the data source in the development of BI. Now i want to change the source system for the data sources in BI to R/3 Qualtiy. This mapping is not done for all th
-
Hi. I am with an upgrade and i know the obsoletes FM but i don't know if i have to make any changes more. I need to know the changes for includes YV*. thanks
-
Hey, I am having a problem with my battery. I have had my computer for about a year and a half *love it* but just recently I discovered that my battery life off the charger lasts for maybe an hour or an hour and a half at the most. Now for the past c