WLSE display rogue Cisco AP as "Unknown Vendor"

Everybody know, WLSE display the rogue Cisco AP as "Unknown Vendor", which is not connect to the same network. Thanks

Most likely is due to corrupt AP beacon causing this to show up as Unknown vendor

Similar Messages

How to reset numbers in real time display in Cisco Supervisor Desktop?

Hi all,
I wonder about numbers in real time display in Cisco Supervisor Desktop. There are many statistic number for example : Call Handled, Max Talking, Avg Talking, Max Ready, Total Ready, Call abandoned, etc. Is there any way to reset those numbers back to zero? Please let me know.
Thank you.

Joe,
I haven't tried that, but I'm very skeptical. The CAD Agent gets stats from two places - CTIOS and RASS. RASS keeps the call log information in a SQL Desktop Engine database.
Stats derived from CTIOS reset at midnight. Obviously, restarting the RASS service has no effect on those. Call log information is being kept in a database so it seems to me that a restart of RASS should also have no effect.
I guess I will have to try for myself.
Regards,
Geoff

Can anyone tell me how to fix this error I am receiving: LabView: File not found. VI "Mobile Display.vi" was stopped at unknown " " at a call to "Mobile Display.vi"?

Can someone help me please? I am receiving this error everytime I attempt to execute my application:
LabView: File not found. The file might have been moved or deleted, or the file path might be incorrectly formated for the operating system. For example, use \ as path separators on Windows, : on Mac OS, and / on Linux. Verify that the path is correct using the command prompt or file explorer.
VI "Mobile Display.vi" was stopped at unknown " " at a call to "Mobile Display.vi"
Attachments:
labview error.jpg ‏176 KB

We cannot help without additional information:
Are you running your code
...in the development system?
...as a standalone application?
...deployed to an embedded target?
If it is a built application, do you explicitly include dynamically called VIs in the build specification?
Who wrote the program? Do you have access to the code?
How is this VI called? Is there sufficient error handling?
Do you manipulate paths as strings or as proper path datatypes with the strip path/build path primitives etc.?
Is it running on the same OS used to develop it ...
LabVIEW Champion . Do more with less code and in less time .

HT201210 i can't restore and update ios 4.2 in my ipod touch,iTunes displays a message saying"an unknown error occurred (-1)".

i can't restore and update ios 4.2 in my ipod touch,iTunes displays a message saying"an unknown error occurred (-1)".

iOS: Resolving update and restore alert messages <--- including error -50

When I try to install "Addblock Plus", a pop-up box displays "Add-on downloading", and "unknown time remaining - 0 bytes (0 bytes / sec)". My local area connection status box shows that it is connected but that nothing is being received.

I am using Firefos 9.0.1 under Windows XP. I use Avast anti-virus. My Add-ons bar is empty. I have not initiated the installation of any plug-ins. Downloads keeps no record of my attempts.

Thank you for your interest mha007. This is an update on my evenings activities so far.
I have done that trouble shooting with results, as follows:
Started in safe mode
In Tools/Options/Advanced/General, I unchecked "Use hardware acceleration when available"
Clicked on Tools/Add-ons
"Get add-ons" displayed "Loading" indefinitely
All 5 Extensions are dis-abled: it suggested that I remove "Microsoft.net framework assistant 1.2.1" & "Test pilot 1.2".
On "Microsoft.net framework assistant 1.2.1" I Clicked "Remove". It remained but with version 0.0.0.
On "Test pilot 1.2" I clicked "Remove". It disappeared.
The single Appearance "Default 9.0.1" is disabled
None of the 16 plug-ins are disabled.
I clicked on Add-ons and "Get add-ons" displayed "Loading"
Several minutes later I found that, "Add-ons" had loaded.
I clicked on "Most popular" and then on "Add to Firefox " within "Adblock plus"
A pop-up box displayed "Add-on downloading", and "unknown time remaining - 0 bytes (0 bytes / sec)".
Within a minute, a Firefox "Alert" pop-up window opened with the message: "An error occurred during a connection to www.mozilla.org:443 / The OCSP server experienced an internal error. / (Error code: sec_error_ocsp_server_error)"
I bookmarked the "Most popular add-ons page"
I closed Firefox and opened it again - not in safe mode.
Clicked on Tools/Add-ons. "Get add-ons" displayed "Loading".
In Extensions, on "Microsoft.net framework assistant 1.2.1" I Clicked Disable", and Restart Firefox
I clicked on Tools/Add-ons. "Get add-ons" displayed "Loading". Message displayed "Connected to services.add-ons.mozilla.org. Waited.
10 minutes later I opened a new tab and clicked on the "Most popular add-ons page" bookmark. Message displayed "Connected to add-ons.mozilla.org". Waited.
15 minutes later, neither of the tabs had responded. I re-started firefox in safe mode
I clicked on Tools/Add-ons. "Get add-ons" displayed "Loading". Message displayed "Connected to static-ssl-cdn.addons.mozill.net"
Using the new tab from above which was not active on restart, I clicked on the "Most popular add-ons page" bookmark.
The bookmarked page opened. I clicked on "Add to Firefox " within "Adblock plus"
Again, a pop-up box displayed "Add-on downloading", and "unknown time remaining - 0 bytes (0 bytes / sec)". (No Alert this time).
I don't know what to read into all of this. Any advice on what the next best thing to do would be appreciated.

NCS Prime Infrastructure 1.3 - can "unknown" Vendor OUIs be updated?

While looking at client information from a pair of controllers on our NCS (version 1.3.0.20) I see what amounts to 53 different "Unknown" vendors listed among the clients. My question - Is there any way to update the OUI Vendor data in NCS to reflect the current IEEE registered OUIs? Considering that approximately 75% of the Unknown vendors I see are Apple devices it would help to have reports reflect vendor reality.

It looks like NCS 1.3 allows you to update the OUI via - Admin->system settings -> user defined OUI
If you are on NCS 1.1.1.24, you will need to upgrade to 1.3 to modify the OUI

How to display Transceiver Cisco PID in Nexus platform?

Hi,
'show inventory' can display Cisco part number (PID) in IOS.
'show interface transceiver' command in NX-OS only shows the technical specification but not the Cisco Part Number (PID). Any body know what NX-OS command can show the PID of transceivers?
Ethernet1/11
transceiver is present
type is SFP-1000BASE-T
name is CISCO-AVAGO
part number is ABCU-5710RZ-CS4
revision is B2
serial number is AGM182xxxxx
nominal bitrate is 1300 MBit/sec
Link length supported for copper is 100 m
cisco id is --
cisco extended id number is 4
Thanks.

Do you see something like this?
sh interface <> transceiver details
transceiver is present
type is 10Gbase-SR
name is CISCO-AVAGO
part number is SFBR-7700SDZ-CS2
revision is B5
serial number is AGD131231HB
nominal bitrate is 10300 MBit/sec
Link length supported for 50/125um OM2 fiber is 82 m
Link length supported for 62.5/125um fiber is 26 m
Link length supported for 50/125um OM3 fiber is 300 m
cisco id is --
cisco extended id number is 4
cisco part number is 10-2415-02
cisco product id is SFP-10G-SR
cisco vendor id is V02

Report to display a Cash/Cheque receipt for Vendor

Hi.,
How to Create a report to display a Cash/Cheque receipt for Vendor

Check out transactions,
F110
F.28
F-28
these transactions are used for making payments to customers/vendors.
Regards,
Raghavendra

Configure the syslog of ASA 5512-X for display on Cisco Prime Infrastructure 2.1

Hi, I'm working on implementing the Cisco Prime Infrastructure 2.1 and want to display the syslog about ASA5512-X with Software Version 9.2.
What would be the procedure for configuring?
Thanks in advance.

Hi,
Enable "logging host x.x.x.x " command to enable logging
check the below link:
http://www.cisco.com/c/en/us/td/docs/security/asa/asa91/configuration/general/asa_91_general_config/monitor_syslog.html#68764
FYI: Prime Infrastructure support only SEV 0,1,2 syslogs as of now.
Operate > alarm and events > syslogs
Thanks-
Afroz
****Ratings Encourages Contributors *****

Cisco PI client station vendor type

hi all,
i have cisco PI when i go to monitor>clients
i can see all the connected clients to my network as long as i can see their station vendor type "Dell,HP,Samsung,....."
I need to know how PI can detect the vendor type ?!
thanks in advance

device profiling can be done different way (like looking at DHCP, HTTP, OUI, etc). Refer below
http://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/7-5/NativeProfiling75.html
So PI can collect these information from WLC & report to you
HTH
Rasika
**** Pls rate all useful responses ****

My iPod won't sync, iTunes displays a message saying "an unknown error occurred (-50)."

I get this error msg everytime I try to sync my iPod. The iPod "Karen's iPod" cannot be synced. An unknown error occurred (-50) I can't find under the "Help" section any kind of trouble shooting or for any error messages. Any answers out there that can help me figure this out on how to fix it??

iOS: Resolving update and restore alert messages <--- including error -50

RFQ for unknown vendor

Der Gurus,
I want to create RFQ for unknow vendor. How to create RFQ, when vendor dont know? Pls suggest.
Regards
Pankaj

If you do not want to create vendor master for every vendor you have request a bid than you need to create a "one time vendor". You can create as many RFQ as you wish with this one time vendor but you have to manually enter some fileds such as vendor name, address etc.
Once an RFQ is approved with one time vendor you have to create actual vendor master record.
Regards

VCS registered endpoints not displayed in Cisco Prime Collaboration 10.5 Assurance and Analytics

Hi,
We have been able to successfully add VCS in Prime Collaboration Assurance and Analytics 10.5 however the endpoints registered with VCS are not displayed in the list of devices. Though, we have been able to add a video codec manually which originally is registered with VCS.
Thanks in advance
Kunal

Hi F,
After investigation this issue, we came to know that this is due to the use of 4096 bit ssl certificate by the VCS.
This is currently not supported by Prime Collaboration 10.5.1 and will be fixed in release 10.6 (available beginning of December).
In the mean time you will be able to discover the VCS is you change the default VCS certificate to match the types that are supported by Prime Collaboration.
Regards,
Kunal

Report to display open purchase order by vendors

Hi all,
Please let me know the report that displays the open purchase orders by vendors
Thanks in advance
sunil

Dear Sunil,
Added to erlier reply, you can get by ME2L/ME2M...., inselection parameters select WE101. Which gives all the POS that are open. You can restrict y giving the vendor number.
If your proble is resolved, please close the issue
With Regards,
krishna

Vendor Ref. no. not displayed in print preview in vendor aging report

Dear SAP team,
Vendor reference number is not displayed in print preview/print on vendor liabliteis aging report,
but this vendor reference number actually show in report,We are taking report by journal postings,
vendor reference entered in NumAtCard in AP invoice get copied to Ref2 in Journal Entry,then
why it is not showing in print preview/print.
Whether this is an application error / missing functionality ?
We are using SAP Business One 2005 B (7.40.252) SP: 00 PL: 36.
Whether upgrade to latest patch 2005B PL46 will solve this issue ?
Jeyakanthan

Hello Jeyakanthan,
I would like to draw your attention to the enhancements we delivered within Aging Report in 2007 version and plan for 8.8 release.
The primary enhancement in 2007 version is reflecting new concept of Internal Reconciliation with more convenient backward reporting.
Within the 8.8 release ...
- when you generate the aging report you can group the report by customer or sales employee in the customer receivables aging report, and by vendor or buyer in the vendor liabilities aging report;
- when the aging report has been generated, you can view multicustomer/multivendor detailed information in the aging report window. There is no need to double-click each customer/vendor row to view the details.
We would strongly to recommend you to upgrade to 2007 version or join the ramp-up of 8.8 release soon.
Peter Dominik
B1 Solution Management

WLSE display rogue Cisco AP as "Unknown Vendor"

Similar Messages

Maybe you are looking for