WLSE - how to delete unused IP segments

Is there any possibility how to delete unused segmentts from WLSE db?
More specific info(answer to subsidiary Cisco Expert Question below)
At 1st we had a WiFi locality - e.g. 10.1.97.0/29 is management seg. WLSE discover it.
Now we physically uninstall locality/HW but IP segment is still in WLSE db => WLSE generate still unaccessible/fault messages in periodic cycle.
It's incorrect by me. It is motivation to delete taht IP segm. from WLSE db.
Message was edited by: omrh

You can go to Devices > Discover and search by IP address. Use a wildcard for IP range. You will be presented with the devices that were in that range. From there you can delete the decommissioned devices which should stop the fault messages.

Similar Messages

How to delete unused audio files in a project?

Hi guys,
The question is fairly simple:
How to delete unused audio files in a project?
I can't manage to find the answer in the manual,... all I could find is how to delete audio outside used regions!
But in the projects I use, I have loads of outtakes which I don't use in the project anymore, and now, I would like to delete them of the audio folder to save space on the HD.
Can Logic select automatically the takes in the audio files folder which are not used in the project and delete them??
Because there is hundreds of audio files per project, and +/- 50 projects, I just can't do it manually.
Thanks,
Fred

Whoops! Yes, I knew that but a cow flew by... Sorry!
The procedure I follow is to do what I described then Save as Project, creating a project folder. That way only the required audio is saved to the folder and I delete all temporary stuff. However, if you have folders with shared material, it's much harder and would require you to go through all your projects doing Save as Project before you could delete your old working folder.
When doing day to day work, best practice is to create a new folder and only use Save as Project when you're working on stuff. Shared material (eg sample libraries etc) can go elsewhere and you can get Logic to copy those to the project folder automatically.
Otherwise, Shift-Backspace in the Audio window, as you rightly say
Pete

HOW TO Delete Unused Media from FINAL CUT PRO

*HOW TO DELETE UNUSED MEDIA FROM HARD DRIVE IN FINAL CUT PRO.* Keywords: disk disc drive space remove compressor
SUMMARY:
Say your original clip is 10 gigs, you can use only what you need and delete the rest from your hard drive. I know people on the forums say to just buy another hard drive, NO! It took 2 days to figure out but here it is!!! Email me if needed at [email protected]
QUESTION:
I captured 1 hour of video at a time and now want to delete from my hard drive all the parts I don’t want to use. I have 300GB of junk on my hard drive and I only want to use a few scenes using a few megabytes, so that I'll get most of my 300GB back!!!!
ANSWER:
In final cut on Mac, click on one small clip (to get familiar with process), go to “file”, “export”, then “using compressor”. This will open compressor software. Your file will open in the left top window. Then you need to batch the job or jobs. IMPORTANT: I’ve also solved the Compressor problem when you press “submit” to a batch and it states “Cluster: None”. Search forum for “In compressor you experience what I have”.
<Edited by Moderator>

Part of the problem could lie in the fact it's an imovie project coming into FCP, wouldn't rule that out. Second my be the terms you use and what you expect to happen. For example, a subclip is just a smaller clip subbed from a larger clip. It has nothing to do with media management. But you can media manage a subclip and delete the unused media.
Try this (be sure to back up the original clip first). take a long clip into the viewer, make an IN and OUT duration of like 30 frames and then subclip that, Modify > Make Subclip. a new subclip will appear in the browser with a torn clip icon and the name Subclip. Right click on the subclip and choose Media Manager.... Check the Delete unused media from duplicated clip. As you toggle that the green Modified bar at the top change from the full clip size to a tiny modified size. If it does not then one of two things ... user error or the system is screwed up. That's the easiest way to test media manager.

How to delete unused formula variable

Hi all,
Could any body tell me in Bex, How can I delete an unused formula variable?
thank you for the input,
Ping

Hi Ping,
can you explain how to do it? I have the same problem.
thanks in advance.
Dimitri

How to delete unused, no drive letter assigned, partitions in Windows 8.1 Pro

Hi,
My drive partitions are assigned as below within "Computer Management" > "Disk Management":
(screenshot not allowed from my account, for some reason).
Volume   Layout    Type File System    Status
Capacity          FreeSpace %Free
<blank> Simple     Basic   <blank>        Healthy(Recovery Part.)    300MB
300MB        100%
<blank> Simple     Basic   <blank>        Healthy(Recovery Part.)    99MB
99MB          100%
3TB (E:) Simple     Basic     NTFS            Healthy(Recovery Part.)   3000 GB
2000 GB      81%
SSD(C:) Simple     Basic     NTFS           Healthy(Recovery Part.)     465 GB
78 GB       17%
I want to remove/delete the 2 partitions, Recovery Partition & EFI System Partition, to the left of the C: Partition on Disk 1.
However when I right click on either partition I'm unable to do anything ("Recovery" only shows help in right click menu, "EFI System" shows full right click menu however everything but the help option is greyed out).
I've also looked around and tried the diskpart command from an Administrative command line. However having tried:
>diskpart
>rescan
>list disk
I can only see the 2 main partitions (3TB/SSD) on both Disc 0 & 1. Leaving me unable to assign drive letters/delete/etc.
Help !

Hi,
Why do you want to delete the two partitions?
Actually, they are not unused, they are managed by PC. Each bootable drive must contain an ESP. The computer will boot to the Extensible Firmware Interface System Partition (EFI System Partition, or ESP).
The recovery partition is Windows RE tools partition.
Alex Zhao
TechNet Community Support

How to delete E1EDP19 002 segment frm the inbound ORDERS IDoc?

Hi ABAP/EDI experts,
I am implementing an User exit related to inbound Sales order EXIT_SAPLVEDA_001.
Most of the time my IDocs contain the below segments.
E1EDP19 001 (QUALF = '001')
E1EDP19 002 (QUALF = '002')
Sometimes, IDoc contain only E1EDP19 001 (QUALF = '001') segment.
My problem is whenever i have two E1EDP19 segments, i want to delete the 1st E1EDP19 segment and retain the second E1EDP19 segment.
Can anyone tell me the pseudocode for deleting the 1st E1EDP19 segment from the inbound orders IDoc.
Am i using the correct user exit??
Thanks,
Creasy Matt
Edited by: Creasy Matthew on Jan 22, 2009 12:56 AM

Hi Matt,
You can loop on idoc_data internal table. This table will be having all the data and the segments.
data: l_count type i value 0,
l_tabix type sy-tabix.
LOOP AT idoc_data WHERE docnum = idoc_contrl-docnum.
CASE idoc_data-segnam.
WHEN e1edp19.
l_tabix = sy-tabix.
l_count = l_count + 1.
if l_count = 2.
l_tabix = l_tabix -1.
delete idoc_data index l_tabix.
endif.
ENDCASE.
ENDLOOP.
I hope this will work.
Please let me know if any issues.

6210, how do delete unused email settings in messa...

Hi,
I have a 6210 and am trying to remove unused email settings in the messaging section of the phone. Any ideas how?
thanks
Message Edited by mitasol on 15-Nov-2008 09:16 PM
Solved!
Go to Solution.

ok found it
/discussions/board/message?board.id=messaging&thread.id=10972
when I first looked at that page I though that Mailboxes was a heading and not an option!

How to delete unused entries in the FROM selectbox in mail.app

Hi,
In the FROM selectbox in mail.app I find entries, that are not in the accoutlist and that are not in the list of the smtp accounts.
How can I get rid of them
Tnx
Micho

Oh sorry. I just found it. My french system is not always helping me.

How can we fine and delete unused variables?

Hi , This is Kumar,
I have been working for some Upgrade project. My manager asked me the way to know unused variables which are already declared in the program . But i don't know any special way to find them.
Normally for Internal tables we are using CLEAR, REFRESH AND FREE.
So,
How can we delete unused variables which are already declared in program?
If anybody have any idea , kindly let me know.
Thanks & Regards,
P.N.Kumar.

Hello friend,
in SE24,SE38 and SE80 there is a menu called "Refactoring" which can enable you to delete unused variable defined in your source code automatically.
Of course it is not the only functionality of this poweful tool. Please read the article below:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/2054857b-1b4d-2c10-f7a5-d283a11f6789
I am sure you can benefit a lot from it not only know how to delete unused variable
Best Regards,
Jerry

Deleting Unused Swatches

Because I'm unable to invoke the "Select All Unused" menu item of the Swatches panel menu I'm trying to attack it programmatically.
What I'm trying to determine is if it's sufficient to compare the Fill and Stroke Color of each Path Item (every path item of current document) or are there other items that should be examined to achieve the same results as the command in the Swatches panel menu? Page Items doesn't appear to contain a Fill Color property. I've got AppleScript code that appears to do the trick, but I'd like to get input so as to make sure I'm not missing something that my testing might not have uncovered.
Thanks!
Stephan

Another method might be to remove the extra swatches from the startup files (or New Document Profiles as they are now known) So there are fewer unused swatches to deal with. Relatively few people take the time to modify the action sets aside from adding new ones. Here's how the Delete Unused Panel Items looks in the Default _Actions.aia file
/action-10 {
    /name (Delete Unused Panel Items)
    /keyIndex 0
    /colorIndex 0
    /isOpen 0
    /eventCount 8
    /event-1 {
        /internalName (ai_plugin_symbol_palette)
        /localizedName (Symbols)
        /isOpen 0
        /isOn 1
        /hasDialog 0
        /parameterCount 1
        /parameter-1 {
            /key 1835363957
            /showInPalette -1
            /type (enumerated)
            /name (Select All Unused)
            /value 12
    /event-2 {
        /internalName (ai_plugin_symbol_palette)
        /localizedName (Symbols)
        /isOpen 0
        /isOn 1
        /hasDialog 1
        /showDialog 0
        /parameterCount 1
        /parameter-1 {
            /key 1835363957
            /showInPalette -1
            /type (enumerated)
            /name (Delete Symbol)
            /value 5
    /event-3 {
        /internalName (ai_plugin_styles)
        /localizedName (Graphic Styles)
        /isOpen 0
        /isOn 1
        /hasDialog 0
        /parameterCount 1
        /parameter-1 {
            /key 1835363957
            /showInPalette 1
            /type (enumerated)
            /name (Select All Unused)
            /value 14
    /event-4 {
        /internalName (ai_plugin_styles)
        /localizedName (Graphic Styles)
        /isOpen 0
        /isOn 1
        /hasDialog 1
        /showDialog 0
        /parameterCount 1
        /parameter-1 {
            /key 1835363957
            /showInPalette 1
            /type (enumerated)
            /name (Delete Style)
            /value 3
    /event-5 {
        /internalName (ai_plugin_brush)
        /localizedName (Brush)
        /isOpen 0
        /isOn 1
        /hasDialog 0
        /parameterCount 1
        /parameter-1 {
            /key 1835363957
            /showInPalette 1
            /type (enumerated)
            /name (Select All Unused)
            /value 8
    /event-6 {
        /internalName (ai_plugin_brush)
        /localizedName (Brush)
        /isOpen 0
        /isOn 1
        /hasDialog 1
        /showDialog 0
        /parameterCount 1
        /parameter-1 {
            /key 1835363957
            /showInPalette 1
            /type (enumerated)
            /name (Delete Brush)
            /value 3
    /event-7 {
        /internalName (ai_plugin_swatches)
        /localizedName (Swatches)
        /isOpen 0
        /isOn 1
        /hasDialog 0
        /parameterCount 1
        /parameter-1 {
            /key 1835363957
            /showInPalette 1
            /type (enumerated)
            /name (Select All Unused)
            /value 11
    /event-8 {
        /internalName (ai_plugin_swatches)
        /localizedName (Swatches)
        /isOpen 0
        /isOn 1
        /hasDialog 1
        /showDialog 0
        /parameterCount 1
        /parameter-1 {
            /key 1835363957
            /showInPalette 1
            /type (enumerated)
            /name (Delete Swatch)
            /value 3

Deletion of Idoc Segments

Hello everyone,
I would just like to ask on how to delete a specific segment of an Idoc aside from using transaction WE19. I would like to preserve the Idoc that's why I'm looking for another transaction that can be able to perform the deletion.
Thanks in advance!

in WE19 you cannot modify an existing IDOC.
you can open an existing IDOC, but with any change SAP creates a new IDOC which has the current values, the old IDOC is then still as it was before.
Try it, if you back out after saving your changes, then you see the new IDOC number in WE19 initial screen

Deleting unused languages

Does anyone know how to delete unused languages? I vaguely remember macbreak saying something about it a couple of months ago but cant remember how they did it

Glad to help, Eddie.
2.2 GB... sweet. Have you also deleted all the print drivers other than the one's you use?
/Library/Printers
-mj
[email protected]

How can I keep my audio track, delete a short segment of video, and reinsert a new video clip, without changing the audio with the way it lines up with the original video?

How can I keep my audio track, delete a short segment of video, and reinsert a new video clip, without changing the audio with the way it lines up with the original video?

If you have either iMovie 09 or iMovie 11 you can do this easily using the Cutaway feature.
Go to iMovie/Preferences and make sure that the Advanced Tools are enabled.
Now you jut drag and drop the 2nd clip onto hte first clip at the frame where you want the Cutaway to start. A popup menu will appear. Choose Cutaway.
Here is a good Tutorial.
If you have iMovie 08, let me know. There is a way to do it, but it is more complex.

How do I invert a selection in iMovie 11/ delete unused portions of clips

I want to delete unused portions of clips:
In iMovie 11 an orange bar appears at the bottom of a clip to show that that portion of the clip is being used in a project.
If I click on the orange bar, the yellow clip selection extends to that portion of the clip.
I want to invert the selection so that the portion of the clip that is not used is selected so that I can reject it and later delete unused portions.
If there is another way to do that then great...
Thanks
David

I think it might be easier to first finish the project with all that extra video clip lying around and then use the Space Saver to tidy things up. It's under the File Menu and is always done at the very end when you have already Finalized your project.
From the iMovie Help:
In the Event Library, select one or more Events.
To select more than one Event at a time, press Command as you click Event names.
Choose File > Space Saver.
The File menu appears in a light gray bar across the top of your computer screen.
Select any of the following:
To reject all of the video that hasn’t been added to an iMovie project, select “Not added to any project.”
To reject all of the video that you haven’t marked as “favorite,” select “Not marked as Favorite.”
To reject all of the video that you haven’t marked with a keyword, select “Not marked with a keyword.”
Click “Reject and Review.”The view changes to show only the rejected clips in the selected Events.
*Note: This is not the full listing of Help for the Space Saver function but you get the idea. It seems as though Apple thinks it's a much better use of your time to put off the house keeping tasks like cleaning up unused video until after you have Finalized the project.

How to delete old unused blog tags from Wiki Server 3 in Lion Server

My Tags index in my Wiki Server 3 wiki (Lion Server) still shows old tags that are no longer in use.
But, how in the world does one remove them?
Any help?   Thanks.

I figured it out, but had one hoop to jump through.   I hadn't noticed a tiny little edit button in the far upper right corner of the tags window.   Clicking it reveals red minus signs next to each tag. That's how to delete a tag.
BUT, since my tags were no longer in use (I'd deleted the original blog(s) they were attached to, when I tried deleting them I got an error message.   So, I created a dummy blog entry, tagged it with the same tags that I want to delete, saved the blog, then went back to the all-tags view and deleted them (they existed this time). After done, I deleted the temporary blog.   All done.
It seems clear that the WIki 3 Server is very primative in many ways. I hope Mountain Lion reveals a host of improvements.

WLSE - how to delete unused IP segments

Similar Messages

Maybe you are looking for