WLSE states no measurement report received on AP scan

I have a netwok with 1240's with fw 123-8ja2 WLSE:2.13
30 AP's
All AP's are registred to the WDS. The WLSE properly authenticated to the WDS (setting registry keys). All AP's are managed by the WLSE. Radio management is switched on on all AP's.
When I do a AP radio scan (or walkabout) i get "no measurement report received". from every AP in that scan on almost every power step. Sometimes, a Power step completes OK.
Has anyone seen this before, and what is causing this?
I've added a screenshot of the WLSE

News :)
Cisco released IOS 12.3-8JEA1 which has the following in the release notes:
CSCsg91315?WDS do return reportS to WLSE without problems
And this bug is:
Symptom:During a WLSE radio scan, Infrastructure APs will fail internittently; sometimes not sending appropriate reports to the WLSE from the WDS. When the reports are missing, the WLSE is unable to complete the task and WLSE fails the job.
Conditions:AP 1100 series, 12.3(8)JEA code, WLSE 2.13
Workaround:Deleting the device from WLSE inventory and rediscovering makes the job run successfully, but only temporarily; after a period of time (less than a day) the jobs will begin failing again.
Further Problem Description:When the AP addresses are hashed in memory, some addresses hash to the same value. When two APs have the same hash vallue, one of them is dropped. This also affects the ability to run Assisted Config jobs.
I'm not shure if this really fixes it, but it sounds good at least :)
Anybody going to try out?
Sadly the current WSLE doesn't show this image as supported :(
Patrick

Similar Messages

Bank Statement Import Execution Report error listing

Hi all,
Does somebody knows how to see detail error generated via Bank Statement Import Execution Report. The CE_HEADER_INTERFACE_ERRORS and CE_LINE_INTERFACE_ERRORS are populated but i cannot found in metalink description how to solve these errors/or i'm just a bad researcher.../.
Version: EBS 12.1.3
OS: Linux
Thanks in advance,
Bahchevanov.

Hi,
Thanks for reply.
The tables i'm checking are ce_statement_headers_int, ce_statement_lines_interface. For any errors: CE_HEADER_INTERFACE_ERRORS, CE_LINE_INTERFACE_ERRORS.
I found that these 3 lines are reconciled. When i unreconciled them and after that reconciled again - they disappeared from the output.
Do you know if that program contains information about the statements created?
Because if i execute it, it creates bank statement header with lines correctly but i received no information about what i just created.
Thanks in advance,
Bahchevanov.

Bank Statement Import Execution Report output wrong?

Hi all,
In EBS R 12.1.3. for the concurrent request Bank Statement Import Execution Report i have always as output :
Miscellaneous Receipts Created
   ---------------------Transaction-------------------
Line      Numbe       Type                 Date        Curr           Amount
2         25-МАР-2012 Misc Receipt         25-MAR-12   BGN          9,000.00
4         25-МАР-2012 Misc Payment         25-MAR-12   BGN              1.00
5         25-МАР-2012 Misc Receipt         25-MAR-12   BGN             10.00I checked the interface tables - they are empty...
Even the output is strange... it created miscellaneous receipts which i'm not sure is possible via this program.
Any ideas? Do i have to purge other tables?
The interface tables for errors are also empty.
Thanks in advance,
Bahchevanov.

Hi,
Thanks for reply.
The tables i'm checking are ce_statement_headers_int, ce_statement_lines_interface. For any errors: CE_HEADER_INTERFACE_ERRORS, CE_LINE_INTERFACE_ERRORS.
I found that these 3 lines are reconciled. When i unreconciled them and after that reconciled again - they disappeared from the output.
Do you know if that program contains information about the statements created?
Because if i execute it, it creates bank statement header with lines correctly but i received no information about what i just created.
Thanks in advance,
Bahchevanov.

'Bank Statement Loader Execution Report ' completed with errors.

Dear Friends,
While I try to call seeded concurrent program 'Bank Statement Loader Execution Report ' its completed with error.log file details:
Enter Password:
REP-0004: Warning: Unable to open user preference file.
REP-3000: Internal error starting Oracle Toolkit.
REP-3000: Internal error starting Oracle Toolkit.
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-3000: Internal error starting Oracle Toolkit.
Earlier everthing is working fine.I am unable to find cause for the error occurrence.
Any one please help me..

REP-0004: Warning: Unable to open user preference file.
REP-3000: Internal error starting Oracle Toolkit.
REP-3000: Internal error starting Oracle Toolkit.
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-3000: Internal error starting Oracle Toolkit.Please see old threads for similar discussion -- http://forums.oracle.com/forums/search.jspa?threadID=&q=REP-3000&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Adding a field to an sql statement in Oracle Reports error ORA-00933

We have been requested to add a field that already exists in the table referred to by the sql statement in Oracle Reports Builder. The report was set up by a consultant about 3 yrs ago and we don't really have much skill in this area. What is happening when I try to modify the SQL statement, either adding a field or deleting a field to the SELECT statement, causes an error message preventing the statement from being saved. The only way out of the error message is to click Cancel. The error message is
ORA-00933:SQL command not properly ended
ORDER BY Program ==> NAME
Even adding or deleting a space anywhere in the SQL statement causes the error (not adding any new fields). A coworker found that if we comment out the ORDER BY, the statement will accept the new field in the SELECT section, however then we lose the order by functionality. I would like to add one additional field before the FROM. Not sure if any additional data are needed. Thank you.
SELECT p.person_uid PIDM_KEY, p.id_number ID,
               p.full_name_lfmi name,
                p.BIRTH_DATE, p.GENDER Sex,
                Decode(a.residency,'D',p.Primary_ethnicity,'F') Ethn,
                a.academic_period TERM,
                CASE WHEN :p_group_by = 'PROGRAM' THEN a.program
                             ELSE ' '
                END AS Program,
                a.COLLEGE, a.degree, a.major, ' ' rule,
                a.STUDENT_POPULATION,a.STUDENT_LEVEL,    a.application_status Status, a.application_status_date app_sts_dte,
                ad.decision_date1 Last_Dec_Date,
                ad.decision1||' '||ad.decision2||' '|| ad.decision3||' '|| ad.decision4||' '|| ad.decision5 Decisions,
                /* Deposit Date uses the last term entered in :p_term parameter string */
                (SELECT MAX(deposit_effective_date) FROM usf_as_deposit WHERE account_uid = a.person_uid &term_clause group by account_uid)   AS "DEPOSIT DATE",
                ph.phone as PHONE,
                CASE WHEN PS.FIRST_CONTACT IN ('NET','PAP','COM','COP') THEN PS.First_Contact
                 ELSE CASE WHEN ps.latest_contact IN ('NET','PAP','COM','COP') THEN PS.Latest_Contact
                            ELSE ' '
                            END
                END AS FIRST_CONTACT,
                DECODE(:p_address,'Y',REPLACE(adr.street1||' '||adr.street2||' '||adr.street3||' '||adr.city||','||adr.state||' '||adr.nation||' '||adr.zip,' ',' '),' ') as address, adr.nation, adr.state,
                goremal_email_address email, a.residency, a.application_date, p.primary_ethnicity, c.cohort
FROM MST_ADMISSIONS_APPLICATION A,
           MST_PERSON p,mst_pre_student PS, Admissions_Cohort c, usf_v_phone_pr_ma ph,
           MST_admissions_decision_slot AD, usf_v_email, usf_v_address_dr_lr_ma_pr adr
WHERE a.PERSON_UID = p.person_uid
        AND a.curriculum_priority = 1
        AND a.person_uid = ps.person_uid
       AND a.person_uid = ad.person_Uid(+)
       AND a.person_uid = goremal_pidm(+)
       AND a.person_uid = adr.pidm(+)
       AND a.person_uid = ph.pidm(+)
       AND ph.rnum(+) = 1
       AND a.person_uid = c.person_uid(+)
       AND a.academic_period = c.academic_period(+)
&Where_Clause
       /*    TAKE OUT FOLLOWING LINE AFTER DATA IS CLEANED UP */
        AND NOT(p.id_number = '00000000'   OR SUBSTR(p.id_number,1,1) = 'B' OR UPPER(p.full_name_lfmi) LIKE '%TESTING%')
       AND a.application_status_date >= NVL(:p_as_of_date,sysdate-8000)
       AND a.academic_period = ad.academic_period(+)
        AND a.application_number = ad.application_number(+)
        AND a.degree <> 'ND'    /*   AND a.college <> 'LW'                         -- Does not need non-degree and law students    */
       &Cohort_Clause
ORDER BY Program &ORDER_CLAUSE

Hi Denis,
I tried your suggestion. The good thing is that adding the comma allowed me to be able to add a.campus to the select statement, unfortunately, another error message happened.
ORA-00936: missing expression SELECT p . person_uid PIDM_KEY ,
p . id_number , p . full_name_lfmi name , p . BIRTH_DATE , p . GENDER Sex ,
Decode ( a . residency , 'D' , p . Primary_Ethnicity , 'F' ) Ethn , a . academic_period TERM ,
CASE WHEN : P_group_by = 'PROGRAM THEN a I started over and tried only putting in the comma and get the same message even though I didn't add campus. After that, removed the comma which led to the ORA-00933 error message. So once again, I had to close the file without saving, in order for the report to run at all.

Financial statement generator & Oracle Reports Manager

We are moving into Oracle Apps R12.1.3 on Solaris. Most end user machines are Windows 7 & going to be Windows 8. Some are Windows XP. Majority have Microsoft 2007 and some have Microsoft 2010.
Financial Statement Generator (FSG) reports are called from GL Super user as well as Oracle Reports Manager. Attempt being made to open FSG reports directly in Oracle Reports Manager > Excel with drill down.
Experiencing errors (of VB) , after some patching seeing Blank Excelsheet. Though same FSG report can be open with Values in Oracle Reports Manager > html and pdf.
Any body experienced this in recent past.
Rgds

Hi Hein,
Thanks for the reply and I do have access but apart from standard/customized reports, sometimes users create their own reports using FSGs where they pull GL data (No sub-ledgers) by defining rows and columns and many more features.
For eg: pulling up trial balance report by cost centers
Is there any equivalent of these Financial Statement Generators in SAP.
I was thinking about defining the "Variants" in each report and run variants but then thats not limited to GL, I guess
Thanks in advance....
Edited by: sap_oracle_BA on Apr 16, 2009 7:46 PM

Problem in sending System measurement report to sap (sdccn)

Dear Gurus,
I am facing a problem in sending the system measurement report to sap (USMM). I have have generated the system measurement report log and while sending it to sap
. when i click on SEND TO SAP tab it gives me message "Data has been already passed to SDCC for transport to SAP" .Please explain me what is the procedure after this .
As i have check the oss connection to sap its working fine
Even sdcc_oss connection is working fine.please help.
Regards
Akif

Hi,
Check it in SM01 whether the transaction is locked or not if locked just unlock it.
Regards,
Vamshi.

Passing parameter into SQL statement in Crystal Reports

Hi all,
I would like to call Crystal Reports in JSP. I can handle it well now. But I hope to let user input their selection criteria before printing out the report. I know how to get the parameter value in JSP, but I really dunno how to pass these parameter values into the SQL statement in Crystal Report. Actually, is it possible to do so?
If anyone has idea, please tell me. Thx Thx!
Regards,
Betty

Dear Sir,
I want to use Crystal Report as a web base using JSP. But, I am getting how to call .rpt file in .jsp file & passing of parameter.
If you have any idea, please reply as early as possible
Thanking U.
My userid = [email protected]
Regds
Pankaj..

How to Retrieve SQL Statements in RDF Reports

I need to retrieve the SQL statements from my reports without having to call each of them up in Reports Builder. The reports are in binary (RDF format). Does anyone know of a way to do this?

Hello,
Convert your RDF into a text format :
- REX
- XML/HTML/JSP if your are using Reports 9.0.x or greater)
and search in these text files .
Regards

State wise VAT Report?

HI All,
Is there any report which shows state wise vat report, this is required for set off vat input v/s vat out put in a particular state.
in our scenario we dont have any manufacturing plant, we are traders so we created each state as a plant.
so please guide us.
thanks & regards,
shashi kanth.

Yes, Busines place ans section code are used for WHT (TDS)
You can use the business place for VAT. Please refer below documentation:-
http://help.sap.com/saphelp_470/helpdata/EN/ba/75d43ad85d6321e10000000a11402f/content.htm
For customization, make the changes in below path:-
SPRO > Cross-Application Components > General Application Functions > Geschäftsort (Business Place) > Activate Business Place
SPRO > Cross-Application Components > General Application Functions > Geschäftsort (Business Place) > Define Business Places
SPRO > Cross-Application Components > General Application Functions > Geschäftsort (Business Place) > Assign Business Places to Sales Offices
SPRO > Cross-Application Components > General Application Functions > Geschäftsort (Business Place) > Assign Business Places to Plants
Regards,
Gaurav

SAP 8.8 - statement in crystal report

Hi,
We have imported layout and reports available in SAP 8.8 Information Center, however, Customer statement (in Crystal version) does not seem to be part of it.
Will statement in Crystal report version be released in any near future?

Hi Paulo,
I am aware that the Crystal report layout available for download. Unfortunately Customer statement is not one of them.
Yes, it is good that Crystal report is provided as a report writing tools. However, we need to look beyond that.
Customer Statement is expected as standard report in all accounting packages and is a document that needs to be sent to third party, ie the customers.
Therefore, the presentatipon of it is important and also the information required is often more than what the existing one has.
The problem is, the data on the existing customer statement are populated by the program and what we can see is just field type "text".
The following screnarios are not taken care of.
Example:
1. It is normal that there are part payment invoice.
The normal request is showing original invoices amount, applied details (ie the receipts/credit notes applied against it) and also the outstanding balance.
2. Posting Date and Document Date are not the same.
SAP B1 allows posting date and document date to be different, but the Document Date fields is not avaialble in PLD.
3. No transactions available for the period.
Customer has no transaction in 1 March 2009 - 30 Apr 2009, however, there are opening balance prior to March 2009.
It is normal expectation that when you run the customer statement for 1 March 2009 to 30 March 2009, it will still produce a statement, with the prior balance row populated.
However, it just does not print the statement at all.
So, Customer has not choice but to keep posting date from blank.
These are just some of the problems.
I would hope SAP could look into this standard report, to add to the list, Stock Aging and Bank Reconciliation report should also be looked into.
Regards,

Ncome Statement & Balance Sheet Reporting via a single ASO cube

Hi All,
I wanted to get some perspective on industry best practices as it relates to performing Income Statement & Balance Sheet reporting via a single Essbase ASO cube. As both these areas share a lot of common dimensions, do most of the companies implement a single cube for integrated reporting or split cubes and have tools like HFR, Web Analysis etc. combine the information from those cubes for integrated cube.
Appreciate any thoughts on this.
Thanks!

In 16 years of Essbase/Hyperion experience (14 of them consulting and training), I have seen just as many clients combining income statements and balance sheets in the same cube (BSO or ASO) as I have seen separate the two into individual cubes. Just as the BSO/ASO decision should factor in data volumes and hierarchy size, the combined/separate cube decision must come from good analysis of the situation at hand. Sometimes it is just a design preference for the company at hand.
Your question seems weighted toward ASO, so I would encourage you to make sure you are using ASO for the right reasons. I reserver ASO for cubes where the current or planned amount of history carried will be massive and/or when a very large hierarchy is required. Otherwise, I prefer to have the full flexibility of BSO.
One favorite project was for a re-insurance company in Bermuda (you can probably guess some of the other reasons I considered it a favorite project!?!). The consolidated P&L and B/S were in the same cube. This allowed us to properly "connect" the two statements such that retained earnings at the end of a quarter could flow over to hit the balance sheet. Of course, a two-cube design wouldn't necessarily prevent this thanks to @XREF (which didn't exist back in those days) or partitioning to name a couple of alternative. This makes my point that, to some extent, it all comes back to a matter of design preference for you and your project team.
Darrell Barr

Income Statement & Balance Sheet Reporting via a single ASO cube

Hi All,
I wanted to get some perspective on industry best practices as it relates to performing Income Statement & Balance Sheet reporting via a single Essbase ASO cube. As both these areas share a lot of common dimensions, do most of the companies implement a single cube for integrated reporting or split cubes and have tools like HFR, Web Analysis etc. combine the information from those cubes for integrated cube.
Appreciate any thoughts on this.
Thanks!

You have asked this question the essbase forum :- ncome Statement & Balance Sheet Reporting via a single ASO cube
Best keeping it to one forum and seeing it is a purely essbase question.
Cheers
John
http://john-goodwin.blogspot.com/

Msg 0, Sev 0, State 1: Unknown token received from SQL Server [SQLSTATE HY000] String data, right truncation [SQLSTATE 01004] [SQLSTATE 08S01] error

I'm looking for some general guidance on this complete error:
Msg 0, Sev 0, State 1: Unknown token received from SQL Server [SQLSTATE HY000]
String data, right truncation [SQLSTATE 01004]
Msg 16389, Sev 16, State 1: The connection is no longer usable because the server response for a previously executed statement was incorrectly formatted. [SQLSTATE 08S01]
This error is caused by a SQL Agent Job, but it does not always occur. I understand this could be an issue with SQL dropping the connection, but what is the best way to troubleshoot this?
Thanks,
Phil

Hi philliptackett77,
It would be more helpful for troubleshooting the issue if you post the SQL Server error log and SQL Server version. Additionally, please state what purpose of using the agent job.
Based on my research, [SQLSTATE 08S01] error means communication link failure. If the executed statement returns invalid value in the job, the connection between server and client will fail. This error could be caused by the error of [SQLSTATE HY000] and
[SQLSTATE 01004]. I’d like to share my knowledge about these errors as below.
Quote: String data, right truncation [SQLSTATE 01004]
This error could occur when passing data whose length is larger than the received object,and the passed value is truncated, and returns invalid value. So please check if the data type of the objects are identical and the length of passed value is not larger
than the received object.
Quote: Msg 0, Sev 0, State 1: Unknown token received from SQL Server [SQLSTATE HY000]
The error could occur in the two cases below.
1. If you use SQL Server version 6.50, and execute the cursor in the job step, set the statement options to use a server-side cursor and prepare a select statement on a SQL Server system table. The first execution of the select creates the cursor successfully.
After you close this cursor, if you execute the prepared statement again, the error could occur.
I recommend you to apply the latest service pack firstly. If the error still occurs, you could change your code by using a forward-only cursor instead of a static, keyset, or dynamic cursor on the system tables. If a forward-only cursor is unacceptable,
prepare the select statement again on the system table and execute it to create a server-side cursor. For more information about the process, please refer to the article:
http://support.microsoft.com/kb/151693/en-us
2. The TDS stream from the server is invalid when transfer data between a database server and a client. This error is typically caused by a problem on the server. For more information about errors above, please refer to the article:
http://technet.microsoft.com/en-us/library/aa937531(v=sql.80).aspx
Regards,
Michelle Li

XML Publisher - can we specify multiple SQL statements in the report?

Hi there,
can we specify multiple SQL statements in the report with XML Publisher?
Regards,
Liviu

Could we eventually generate with the Wizards available in XML Publisher desktop 5.6.2 an xml file with a structure like the one given below? The reason is to facilitate creation of the two rowsets. Thanks, Liviu.
<?xml version="1.0" encoding="UTF-8"?>
<DATA>
     <ROWSET2>
          <ROW2>
               <FIELD1>Query1</FIELD1>
               <FIELD2>field2</FIELD2>
               <FIELD3>field3</FIELD3>
          </ROW2>
     </ROWSET2>
     <ROWSET>
          <ROW>
               <FIELD1>Query2</FIELD1>
               <FIELD2>field2</FIELD2>
               <FIELD3>field3</FIELD3>
          </ROW>
     </ROWSET>
</DATA>

WLSE states no measurement report received on AP scan

Similar Messages

Maybe you are looking for