WLSE Support for 802.11g

Does the 1130 currently support 802.11g radios? If not does anyone know when this support will exist?

I need to buy WLSE 2.5 before the end of Feb (to comply with my budget expenditure regulations).
Will the upgrade to 2.7 be free of charge to users of 2.5 or will we have to pay etxtra for it?
We are eagerly anticipating the 'a' and 'g' radio management features also.

Similar Messages

URGENT: Is Weblogic 10.3.4 not supported for OIM 11g ?

Hi Everyone,
Is Weblogic 10.3.4 not supported for OIM 11g ?
I installe & configured all IAM suite components (OAM,OIM,OAAM,SOA) on WLS 10.3.4. I am able to start all servers including OIM. However it is unable deploy "oim". After doing some research , I found below URL which tells WLS 10.3.4 is NOT SUPPORTED for OIM 11g.
Not able start oim_server1, could not open oim url
If that is true, Is there anyway to downgrade Weblogic to 10.3.3 ?
Please provide your inputs and suggestions.
Thanks
GK

No. 11G has been released with all type of supporting infrastructure components to be residing at the same level (i.e 11G only). So you would not be able to just downgrade weblogic to any lower versions.

Airpcap and WireShark support for 802.11k, 802.11r, 802.11u?

Folks,
I have a need to troubleshoot/test 802.11k, 802.11u, and 802.11r messaging.
Does anyone know if AirPcap Nx + Wireshark will capture and properly decode these 802.11 amendments:
802.11k
802.11r
802.11u
I have looked in Wireshark forums and seen references to all of the above amendments but I can't find anything conclusive to indicate the level of support for these headers/fields/messages.
Thanks for any insight.
Joey

George,
I don't know yet. However, to begin testing devices I'll need a tool that can decode the protocols so I can see who supports what.
Based on my research for evidence sake,
Wireshark 1.7.0 dev branch appears to:
Support 802.11u fully
Support 802.11r fully
Support 802.11k partially
The 802.11k information elements I can't find or are not supported for 802.11k are:
7.3.2.42 Measurement Pilot Transmission Information
7.3.2.43 BSS Available Admission Capacity
7.3.2.44 BSS AC Access Delay supported
7.3.2.45 RRM Enabled Capabilities
7.3.2.46 Multiple BSSID
-Joey

My wifi network is 802.11n but there are times changing for 802.11g, and have to restart ... after the update for Mountain Lion

My wifi network is 802.11n but there are times changing for 802.11g, and have to restart ... after the update for Mountain Lion... Help!!!
Several problems with Mountain Lion, APP STORE (login/logout error), WIFI(802.11n for 802.11g), MAIL (horrible)... Apple, what is happening?

Do a factory reset .. nothing will be deleted from your backups and you will be able to get access to them again.
The Factory Reset Gen1-4.
Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.

TimesTen Cache Connect support for Oracle 11g

The latest 7.0.5 readme mentioned that "Oracle Release 11gR1 is supported with TimesTen Cache Connect to Oracle on Linux x86 32-bit and 64-bit platforms, and on Windows 32-bit."
What about Solaris 10? It looks like on Solaris 10 only Oracle 10gR2 being supported. What is so specific about Oracle 11?
Thank you,
Alex

TimesTen 7.0.5 can be used to cache data from different versions of Oracle database.
The reason why the support for Solaris, AIX, and HP-UX were not at the same time as the Linux platform was because Oracle database 11g was not available on those platforms initially. So TimesTen 7.0.5 was certified to support only the ones available first, and support for other platforms was added as 11g became available on those platforms. It was just timing of the certification, code base is the same.
Susan

SAML Support for OSB 11g

Is SAML 2.0 supported in OSB 11g?
Thanks,
jay

Hello Jay,
OSB 11g supports SAML V1.1
http://download.oracle.com/docs/cd/E14571_01/doc.1111/e15866/saml.htm#i1062321
Regards,
Anuj

AQMP protocol support for OSB 11g

Hi all,
We are using OSB as our middleware tool in our project.we got a new requirement for integration.The requirement is that OSB need to communicate with an application which supports AQMP protocol.I heard that aqmp is JMS based protocol.
My query is that can we access the AQMP based queue via OSB using foreign jms server.
Regards,
Ganesh

Hello Jay,
OSB 11g supports SAML V1.1
http://download.oracle.com/docs/cd/E14571_01/doc.1111/e15866/saml.htm#i1062321
Regards,
Anuj

Apple left out support for 802.11i, secure wireless networking WAP2

We just bought this iMac from Apple in July, and I'm very unhappy that Apple designed the AirPort networking for one generation earlier security with wireless networking.
The 802.11i standard, which supports very secure WAP2 without the need for a Radius Server (I believe 802.11i refers to this as personal mode) was adopted by the IEEE in 2004.
Apparently, 2 years isn't enough time for Apple to get the correct chipset into the computer. This system supports the earlier standards only, WAP and WEP. To achieve the newer standard requires a different chipset in the AirPort hardware. Apple supports 802.11i in the stand-alone AirPort gateways, and may support it in the newer Intel Core 2 Duo systems as well. Grumble, grumble, grumble.
For Apple marketing and customer support folks reading this, I'd appreciate your thoughts and suggestions on fixing this.
iMac Intel Core Duo 17" Mac OS X (10.4.8)
iMac Intel Core Duo 17" Mac OS X (10.4.8)

"I can find no indication of an Apple AirPort product that says it is capable of WPA2"
mrwheels,
You sound like someone looking for an argument. I'm not sure what the relevance of your statement really is, and I've also never heard of 802.11i. The only standards I've heard of are "b" and "g," not "i." Why don't you fill me in, as I've been using WPA2 since earlier this year? I believe my system automatically updated to it from WPA during one of the software updates, I think it was 10.4.6 in April, as I specifically recall having one iMac that was encrypted with WPA while another had WPA2. There was some sort of temporary issue that occurred with that setup, but, unfortunately, I can't remember what it was, since it lasted such a short time (the few minutes until I installed the update on the second iMac, as I recall).
Since the update was not a problem for me, the job of reading the update read-me's to determine exactly when it occurred will have to fall to you. In addition, if you look back at these discussion threads during the time from Jan to April, you will see that there were a goodly number of users who were having severe AirPort connection problems with their Core Duo iMacs. I wasn't one of them. They ALL reported having their problems resolved with the installation of the 10.4.6 software update.
I am using WPA2 on my four 20-inch Core Duo iMacs [purchased at three different times from two different Apple sources] as well as my G4 iBook and other Macs. They have been using WPA2 on both an AirPort Express base station network, and, at a different location, on an AirPort Extreme base station network, both of which are more than two years old. No matter what Apple's printed materials disclose, WPA2 is in fact supported.
"Apple is selling products that are 2 years behind in supporting a critical wireless security standard"
Based on what I've stated, and the fact that there are many Discussions members also using WPA2 with their AirPort base stations, that is baloney:))
Message was edited by: myhighway

Airport Express (Model with 802.11G +54MBPS Mac/PC and Set Up Issues

Hi,
We have a 4 Mac and 1 PC Household. Cable Internet Service by Roadrunner.Cable model (owned) connected to a D-Link 802.11G wi fi router (by ethernet from cable modem)in the family room , then out to a Imac (the half moon base and LCD screen with a airport card also in the family room and the closet computer to the D-Link
router, (we did add a D-Link antenna to the router ? about 10 months ago (a D-Link ANT24-0700 (Version 1.2)and a HP 4 in 1 printer attached via USB to the Imac
,a eMac 1.25 ghz 1Gb ram with airpot card also connected wirelessly (no printer attached on the same floor but in a ajoinging room about 20 feet from the Router, and another eMac 1.0 Ghz 1Gb ram with airport card in the upstairs part of our house (a bedroom) and no issue with Internet connection (it has a Epson 3in 1 printer attached via USB, and a MacBook Pro with 802.11N wireless card in side , bought for a Christmas/Birthday Present and also for college.It to has no issues with the Internet where ever it may be in the house. Our sole PC a HP tower with a added D-Link WDA -2320 Range Booster Desktop Adapter (802.11G) and we added a D-Link Antenna same model as the other a ANT24-0700 to help with Internet access which it did as well as adding some ram to increase page loading time etc. It does not have a printer attached. I will get to the Topic Area now
The Airport Express. I was not involved in the set-up as I was laid up due to a bad back and post major knee surgery , But I always (especially recently) wondered why the light was amber and blinking. I read through the manual and also
Apple.com support and MacFixit.com (which is under construction and moved to part of Cnet.com)and then went to the Airport Express Discussion area (sorry for being so wordy) I need a Twitter account to post!) We have a network name for the D-Link and the computers all were added and it also supports a Xbox 360, a Sony PlayStation 3 and a Nintendo Wi (in online use without issue) but..
A network was also as it appears to myself) for the Airport Express and under the half moon bars showing connection strenght (there is our D-Link network "phoenix" with security protection WPA2 I believe) as I have set up the router, We had a Apple Base station prior that was ? 802.11B (a half moon white unit) still have it in the box ) So for normal daily use, checking e-mail and internet use all of the computers use the "phoenix" or D-Link supported Router 802.11G
and The other network calld Apple Network with numbers and letters after it (and hopefully security) password is unknown , The Airport Express is set up connected via USB to a HP B&W laser printer which has saved quite a bit of money on ink, To utilize that printer you must switch from "phoenix" The D-Link router network to the Apple Network (followed by letters and numbers) The Imac and the eMac in the family room and a ajoing room (after switching to the Apple Network
can than print to the lasr printer. The eMac upstairs and the HP Windows XP Professional software can not print to the laser printer (yet the HP PC shows it as a individual network and a strong signal, equal to the Internet connection from the D-Link, and the eMac (after switching under the half moon (not the proper name I am sure) to get to the Apple Network to print , it will not print, yet it shows a 5 bar signal, same as the D-Link connection. I do believe we have two seperate networks (but do not understand why the two Mac's in the family room can print to the laser printer by simply switching networks and then file and print. ** One other 9probaly major item is that it states to set up the Airport Express with a Mac With OSX 10.4 or later (at the time of set up, we had the Imac and two eMac's all running Panther OSX 10.3.9 9which they continue to have installed) We obtained the HP Tower and Monitor and HP 4in 1 printer ust before Christmas in 2008 and the MacBook Pro in Mid December 2009 (current model and running Snow Leopard 10.6. The HP Tower runs Windows Xp Professional (Service Pack 3) so the MacBook Pro which is much more mobile , could be used to do the set-up, or the HP Tower coulf be moved temprarily, I do recall if Router changes (at least with The D-Link You need to be connected by Ethernet to the Mac
that would be doing the set up/configuration of the router (and it runs OSX 10.3.9 and is a older Mac (with 80Gb Hard drive that is partioned for OS9 and OSX as well , it is under a Ghz processor wise and less than 1 Gb of ram as the last ram slot required a seal to be broken and 256mb of ram (?) could be added
it has 768 mb of ram but knock on wood running well. We use Lacie external drives
on the Imac and both eMac's and need to get external drives for the HP PC as well as the Mac Book Pro (15" screen)
I apoogize if I repeated myself, and rambled but I wanted to (in one post) to explain our set up and network configuration
Questions
1) if indeed it is that the two networks is true and a set yp that is not correct
can the Airport Express be configured without opening up the router (when ever that happens it seems one computer is unable to get online and each time its a differnt one a Mac or veen the PC
The PC under My Computer and Networks clearly shows the wto distinct and seperate netwoks with strong signals and the distance is not far (it is through a floor as the other emac and the PC are upstairs and cabling by ethernet is not a option
2) If I need to open the router would I add the Airport Express as a client as if it was one of the computers or gaming systems on the network? (adding the Mac adress or IP address (not sure how you find the Mac address) and its been while since the router was opened up for any additions or work on it.
3) would it be on the same channel as the router or not ?
4) Hopefully with proper configuration the light will stay on (and green) on the A/E and the eMac and HP PC will be able to print to the laser printer. Currentlt
when anything needs printed from the PC its put on a Flasg Drive and plugged in tothe Imac and the the Apple Network is selected and data printed, The eMac upstairs has the option of using the attached Epson 3 in one or doing the Flash stick work around.
I would be verya appreciative if some one took a look at the set up above and advised me of what is right, what is not right* and what to do to fix things up
I would imagine after proper set up, delete the Apple Network from the PC and eMac upstairs and ? all of the computers as we should have one base station (the D-link and the spoke (the A/E connected by UBS to the A/E (it may be ethernet but the cable connection from the A/E to the HP laser printer is correct (the rest of the A/E set up ... Please , tell me where it is and where it should be
and ? any idea why we can print to the laser printer down stairs and not up stairs ? it did mention printer set up with Panther as possible, page 43 of themanual we have un chaper 5 Tips and Troubleshooting (under whn your printer isn't responding) (we do not have the interfereance listed in the manual,
our phones are land line, one 900 mghz and the others 5.8 ghz
It is possible to move the A/E and laser printer if that would help the two computers (desktops) upstairs) bt the distance is way less than 150 but their is a floor and ? duct work (metal ) but I think here is a place to stop typing and let some of the experts on the discussion forums take a look.
one lst note (as the lap top will be going off to college in the fall (runnning Snow Leopard, and the other 3 Mac's run Panther OSX 10.3.9 should the HP PC windows Xp Professional be the computer to set up the air port express and the Airport Utility proram installed & would this conflict with the current Router (set up by a Macc running OSX 10.3.9 (Panther) i.e (should both set ups be on the same computer?) but actually aThe D-Link is OSX10.3.9 compatible (and 802.11G) and set up requires ethernet connection to a Mac (You type in the numbers and . etc and password as administror and you are in, or should the admin be on the same cpmpuer for the router and A/E ?
(and considering a Airport Extreme Base Station as well as dual frequency simulataneus and 802.11N (for the laptop now) and future, or wait. The 802.11
in theory would broadcast farther..?? even if computers had 802.11b(our Mac Desk tops and the PC 802.11B card
Thanks Again!!!
Many, Many Thanks
amnienttales

William Boyd Jr.
Hello again,
D-Link Router is model DGL-4300 (along with a D-Link ANT24-0700 Omnidirectional
7dbi Antenna . Our Cable Internet ISP (Roadrunner) provides consumers with dynamic ISP address's . All Mac's have Airport Cards and The Hp Tower XW4550 has a D-Link Rangebooster G Desktop Adapter WDA-2320 (also with a D-Link ANT24-0700 Omnidirectional 7 dbi Antenna (the PC OS is Win XP Pro Service Pack 3) The 3 desktop Mac's run OSX Panther 10.3.9 , The 15" MacBook Pro OS is OSX 10.6 Snow
Leopard (not sure what is after the .6 (right now) D-Link's website is
http://www.dlink.com , I have configured this router multiple times in the past.
also added as clients on the network (Utilizing the D-Link Router) are a X-Box 360, Sony Play Station PS3, and a Nintendo Wii all of which have on line ability
and enables online video game play with any one online.
As mentioned prior the Airport Port Express is Model A1084 Part No. M9447OLL/A
which is USB conected to a HP LaseJet B&W , model 1020 and some how the two computers near it can switch to the Airport Express Network from the D-Link Router based Network and print wirelessly to the A/E connected LaserJetPrinter
I realize I will need to reconfigure the D-Link Router and add the A/E as a client. I will try first to use the Airport Utility and see if I can do anything
Utilizing it (adding it to the D-Link network, I think its unlikely but worth a try but* the password is unknown but I have a few guess's as to what it may be.
I do have the necessary admin and network paswwords to cconfigure the D-Link Router,
1) * If the the A/E Utility experiment fails and I need to re-configure the router * do I need to (as per the Airport Express Set Up Guide (Use a Mac with OSX 10.4 or later or a PC with Win Xp Home or Professional (have a desk top PC that has the specs) and The Mac Book Pro meets the Mac Spec's)
If I can not get a password to work on the A/E I would reset it using the reset button
And before plugging in the A/E , connect the appropraite cables in our case a USB cable to the LaserJet Printer then plug in the A/E
2) I would then connect by Ethernet from Either the Mac Laptop or The PC to the D-Link router (if not the router will not set-up correctly)
3) The one question that puzzles me is that we are not using the A/E as a base
but a client
in two sections(Using Airport Express , connecting a Printer via USB
and use Airprt Utility to create a new network or join a new newWireless computers using Mac OSX 10.2.7 (Tiger) or later or a PC with Windows XP and it then goes in to the steps of ising the printer for both a Mac and a PC (using Bonjour on the CD that came with the A/E (this appears to contradict needing to use Mac OSx 10.4 or a PC with Win Xp set the A/E up for use as a printer
(joiing a new network or existig one)
And in Chapter 5 Tips and Roubleshooting= Your Airport Express Status Light Flashes amber & Your Printer is not responding (it is flashing amber and the printer does not respond to the two computers upsstairs (one Mac running OSX 10.3.9 & One PC running WinXp and its states to make sure the printer is selected
in the Printer list o client computers, to do this on a Mac using OSX 10.3 or later , open Printer Set Up Utility and follow steps and if a PC with Windows XP , Open Printers and faxes and then follow steps
in Closing ? can I configure the A/E Utility with a Mac using 10.3.9 as above or
? Per Chapter 1 Getting Started use a Mac with OSX 10.4 or later or a PC with Windows Xp Home or Professional
Perhaps I am taking the tips and trouble shooting and Printer Set up out of context or does the getting Started Computer specs contradict them or are they
for use if the A/E was going to be a Base Station and not a client..
Will keep at it,
ambienttales

Time Capsule slow as 802.11g WAP

I've been having trouble with my wireless network since I received my 1TB Time Capsule. AppleTV quit syncing, .Mac Sync hung repeatedly, and Printing via the Time Capsule stutters. I only have 802.11g hosts on my network, so 802.11n performance isn't something I'm evaluating.
The goal of this testing is to assess the Time Capsule as a network access point for 802.11g hosts. Disk read/write is not part of this experiment. Each of the measurements below are results from the exact same test -- measure internet upload and download performance to a test server on the speedtest.net network.
My topology is as follows:
SBC DSL -> 2Wire modem -> TimeCapsule
For the tests below, I connected my MacBook Pro to each device, wirelessly via 802.11g and direct connect via Ethernet and ran the test from speedtest.net. Since I have a 3Mb connection, the speed of my ethernet is irrelevant. The results of the testing is below and the results show that using the Time Capsule as an 802.11g hub is slow, in fact 75% slower.
Internet Performance (3Mb service)
network performance -- connecting via
*660k dl/430 ul -- TimeCapsule (802.11g - single base station, or as WDS main)*
2546k dl/429 ul -- TimeCapsule (Ethernet Hard Wired)
2547 dl/432 ul -- 2Wire 802.11g
2546 dl/431 ul -- 2Wire (Ethernet Hard Wired)
My conclusion, based on this testing and from several posts in this discussion board is that the Time Capsule exhibits poor performance for hosts connecting via 802.11g.
Is there some setup thing I'm missing?
Message was edited by: JustStone

JustinK101 wrote: I suppose I could plug my MacBook into the TC via a gigbit cable and see the speed then, but the whole point was to do wireless backups.
The initial backup should have been wired. Future incremental backups would not be this large and wireless backups should be okay.

I would like to replace my old AE 802.11g with new version 802./11n - How do I connect

I have just bought a new Airport Express (802.11n wi-fi) and would like to use it as the base station in place of the older version (802.11g).
The old one to be used in another room connecting to my sound sytem as an extention to the new one.
Both of these AEs utilise different Aiport Utility (5.6 against 6.1).
Can anyone please give me some detailed explanations of how I can set-up these devices, if indeed they are possible.
Alan

Sorry, just to make sure: Do you want the older 802.11g Express just for iTunes streaming or (in addition) to extend the wireless range of the newer 802.11n Express? If it is the latter, you may want to reconsider doing so as the only way to extend with "mixed" base stations is with a Wireless Distribution System (WDS).
A WDS has two major disadvantages: 1) It can only operate in the 802.11g radio mode, basically negating the advantage of your 802.11n Express, and 2) For every base station added to the WDS, the overall bandwidth is cut in half. So starting with 54 Mbps (for 802.11g), your extended wireless network will be running around 25-27 Mbps.

Can I force my airport extreme to 802.11g only?

I've got an 802.11n airport extreme base station, and its options for network speeds are 802.11n (b/g compatible) & 802.11n only. Is there any way to force it to do 802.11g only? Or 802.11n/g only...I don't want it doing b because apparently the ps3 picks b over g and goes pretty slowly. So I want to force it to be g at the slowest.

You can set the 802.11n AirPort Extreme Base Station (AEBSn) for 802.11g only by holding down the <Option> key before making the selection in the AirPort Utility.

Jaguar OS Support for Wireless

I'm not very familiar with the various Apple OS's so be patient. Does a laptop with Jaguar OS have support for 802.11b/g WPA TKIP security.

Jaguar is 10.2
Panther is 10.3
Tiger is 10.4
None of these are free upgrades.
Depending on your Apple laptop, I would suggest going for Tiger.
, "kmosx4: 10.4 Tiger Upgrade: Decision tree+Checklist" #1,

I have a new MBRP. On wired ethernet it can be used as a wireless hotspot. Since 802.11ac gets better range I'd like to use it with 802.11ac as a hotspot for my older 802.11g/ndevices. Can I do that ?

I know that if I use wired ethernet then the MBRP can be a wirelss hotspot for other devices. Since the MBRP supports 802.11ac and I have a new 802.11ac wireless router it gets much better range than my older 802.11/n devices. There are places in teh house where the MBRP connects to the wireless but where older 802.11g/n devices lare out of range. In those rooms I'd like to use my MBRP connected to the network wirelessly using 802.11ac as a hotspot for the nearby 802.11 g/n devices. Anyone know if that can be done and how to do it ?

Turn on Internet Sharing in Sharing preferences. Share the Ethernet connection to wireless.

Cisco Access Point Configuration to support 802.11b & 802.11g protocol

How do i Configure access point to support both 802.11b & 802.11g clients on a Cisco 1121G series access point(AIR-AP1121G-A-K9)
Regards
Hitesh

Hi Hitesh,
Check out this excerpt from the 1121g AP Installation guide section on enabling the 802.11b and 802.11g radios.
In Cisco IOS Release 12.3(4)JA and later, the access point radios are disabled by default, and there is no default SSID. You must create an SSID and enable the radios before the access point will allow wireless associations from other devices. These changes to the default configuration improve the security of newly installed access points. Refer to the "Configuring Basic Security Settings" section for instructions on configuring the SSID.
In Cisco IOS Release 12.3(2)JA or earlier, the access point radio is enabled by default, and the default SSID is tsunami.
To enable the radio interfaces, follow these instructions:
Step 1 Use your web-browser to access your access point.
Step 2 When the Summary Status page displays, click Network Interfaces > Radio0-802.11B or Radio0-802.11G and the radio status page displays.
Step 3 Click Settings and the radio settings page displays
Step 4 Click Enable in the Enable Radio field.
Step 5 Click Apply.
Here is a link to the actual document:
http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_installation_guide_chapter09186a00804d2b73.html
Hope this helps!
Rob
Please remember to rate helpful posts....

WLSE Support for 802.11g

Similar Messages

Maybe you are looking for