??~~~~WLSE Supported APs Firmware Vs IOS Version~~~~??
Hi, Dear all
I'm confused in the WLSE version and the managed AP IOS version.
The supported device message could be found at the link below:
http://www.cisco.com/en/US/products/sw/cscowork/ps3915/products_device_support_tables_list.html
My question is that whether the WLSE V2.12 only support the AP with IOS 12.3(2)JA the specified IOS release in that page?
If this is true, is that mean, we could only book an old version for the customer? Because to avoid new IOS uncertain influence to their real time product line, the user would rather not to upgrade to the new version of IOS.
And is the Firmware it mentioned is the APs Boot Loader ? For example:
When we use "show version", we can see 2 version info, one is BootLoader, another is the IOS. Which is the Firmware PLS?
=================================================================
AP1100>sh ver
Cisco Internetwork Operating System Software
IOS (tm) C1100 Software (C1100-K9W7-M), Version 12.2(15)XR2, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Fri 17-Sep-04 13:29 by kellythw
Image text-base: 0x00003000, data-base: 0x005E8494
ROM: Bootstrap program is C1100 boot loader
BOOTLDR: C1100 Boot Loader (C1100-BOOT-M) Version 12.2(4)JA, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
AP1100 uptime is 5 days, 12 hours, 43 minutes
System returned to ROM by power-on
System image file is "flash:/c1100-k9w7-mx.122-15.XR2/c1100-k9w7-mx.122-15.XR2"
====================================================================
Does tha mean that older versions of WLSE will not support 12.3(7)JA, what if i upgraded my AP to 12.3(7)JA and was runig WLSE 2.9.
Thanks,
Tarun
Similar Messages
-
802.1X with Guest vlan support IOS version ???
I don't know, Whitch IOS version support 802.1X with Guest vlan to Catalyst 2950 and 3550 switch
please reply to my question.Tkank for your help.
Also, Cisco web is explained , except for Catalyst 2950 Standard Image (SI) in IOS 12.1(22)EA3
but I can't understand, My site is using catalyst 2950 SI to 802.1X and guest vlan in IOS image 12.1(22)EA3
ex) TW_14F_A_C2950_32.8#sh ver
Cisco Internetwork Operating System Software
IOS (tm) C2950 Software (C2950-I6Q4L2-M), Version 12.1(22)EA3, RELEASE SOFTWARE (fc1)
Running Standard Image
24 FastEthernet/IEEE 802.3 interface(s)
Model number: WS-C2950-24
please, reply for my question -
Which IOS version supported EEM?
Hi
May I know which IOS version supported EEM (Embedded Event Manager) ?
we are using 2960 and 3750. Does c2960-lanbasek9-mz.150-2.SE5/c2960-lanbase-mz.122-35.SE5 support?
hugoEEM supported on 3750:-
http://www.cisco.com/c/en/us/products/collateral/ios-nx-os-software/ios-software-releases-12-2-special-early-deployments/product_bulletin_c25-614546.html
But as leo said its not on 2960. -
CS5.5 Air for iOs - Which iOs versions are supported?
Hi everyone,
I wanted to test the functionalities of the Cs5.5 exporter for iOS, by exporting a previous Flash game i made on my 2G iPod, with 4.2.1 iOs version installed.
Since i wouldn't want to pay for the iOS developer certificate just for trying, can anyone point out a solution for this?
Moreover, is anyone sure it's gonna work? I wouldn't wanna spend good money just for seeing the Flash exporter is no good for my device.
Suggestions?
Anyone tried on similar OS?
Thanks a lot
IacopoOk, i managed to use a fake certificate (i know i shouldn't say that) just to check the feasability of a game on iOS and.... I found out that the exporter doesn't work on my iPod Touch 2G (iOs 4.2.1)!! It says the iPod is not supported!!
Any news on this?
Do i need to buy an iPhone 5 to test flash games? It sounds a little extreme.... -
Does model WS-X2914-XL-V support IOS version c2900XL-c3h2s-mz-120.5-XU.bin?
Hi,
really appreciate if anyone could advise on the following.
Purpose: to implement bpdu guard on switch model WS-X2914-XL-V. current IOS version c2900XL-c3h2s-mz-120.5-XU.bin does not support bpdu guard feature.
Action: Download from cisco website c2900xl-c3h2s-mz.120-5.WC14.bin but installation failed. (details in attached file, show version)
Question:
1) wonder if my switch can be upgraded to IOS c2900xl-c3h2s-mz.120-5.WC14?
2) If yes, what causes the error in IOS upgrade?
Thanks!!!
ChristinaHi Christina,
Yes your switch definetely supports this image and your switch model number is WS-C2924M-XL-A as I can see from the attachment but in your notes you have updated WS-X2914-XL-V which I think is wrong.
As per the attachment which you have send your switch is WS-C2924M-XL-A and it supports 12.0(5)WC14 but the problem is your switch does not have enough space available in your flash to load the new IOS.
If you check the output of "sh flash" you will see 3612672 bytes total (840192 bytes free) which means not even 1 MB space is free and you new file will definetely be more than 1 MB so delete the old file first and then try installing the new one.
Your switch for sure supports this new file, to confirm my statement please check this link
http://www.cisco.com/univercd/cc/td/doc/product/lan/c2900xl/2935wc14/ol256210.htm#wp84866
HTH, if yes please rate the post.
Ankur -
Cisco IOS Version to Support SIP Trunking on AS5400 Routers
Hi all,
Kindly help .Can anyone tell me which Cisco IOS Version Supports SIP Trunking on AS5400 Routers ?
Regards,
Cliff .Hi,
Please look at:
http://www.cisco.com/en/US/products/hw/univgate/ps505/products_data_sheet09186a0080091e51.html
http://www.cisco.com/en/US/docs/routers/access/as5350/software/feature/guide/UPfeapu.html
HTH
Jorge Armijo
Please remember to rate helpful responses and identify helpful or correct answers. -
Router platform and IOS version to support MPLS
I have few Cisco 2621 routers and one 3640 router, could I use these router to create a MPLS VPN lab? if so , what is the minimum IOS version required?
Thanks in advance.The minimum hardware and software image tu support MPLS can be found at www.cisco.com/go/fn select search by feature and in the search box put MPLS (Multiprotocol Label Switching) there you can find the platform and IOS to support basic MPLS, but you need to consider the fact that supporting MPLS special features like AToM can only be supported on some 7200, 7500, 7600, 10000 and 12000, http://www.cisco.com/en/US/products/sw/iosswrel/ps1839/products_feature_guide_chapter09186a0080153e64.html#1030652
-
Minimum IOS version to support scp URLs
While recent IOS versions support scp sources or destinations for copy
operations ...
aprompt#copy running-config ?
flash1: Copy to flash1: file system
flash2: Copy to flash2: file system
flash: Copy to flash: file system
ftp: Copy to ftp: file system
http: Copy to http: file system
https: Copy to https: file system
null: Copy to null: file system
nvram: Copy to nvram: file system
rcp: Copy to rcp: file system
running-config Update (merge with) current system configuration
scp: Copy to scp: file system
startup-config Copy to startup configuration
system: Copy to system: file system
tftp: Copy to tftp: file system
tmpsys: Copy to tmpsys: file system
aprompt#copy running-config
... older ones obviously don't (here we have 12.1):
aprompt#copy running-config ?
bs: Copy to bs: file system
flash: Copy to flash: file system
ftp: Copy to ftp: file system
null: Copy to null: file system
nvram: Copy to nvram: file system
rcp: Copy to rcp: file system
running-config Update (merge with) current system configuration
startup-config Copy to startup configuration
system: Copy to system: file system
tftp: Copy to tftp: file system
xmodem: Copy to xmodem: file system
ymodem: Copy to ymodem: file system
zflash: Copy to zflash: file system
aprompt#copy running-config
Who could tell me the minumum version to support scp URLs?
Thanks and Regards, ThomasIdeally any feature set questions are answerable in Cisco Feature Navigator (http://www.cisco.com/go/fn).
The Secure Copy (SCP) feature provides a secure and authenticated method for copying router configuration or router image files. SCP relies on Secure Shell (SSH), an application and a protocol that provide a secure replacement for the Berkeley r-tools. So ideally you should be running crypto images (k9) which support SSH and hence SCP as well.
But following are some details about SCP, which may be helpful :
Feature Name
Releases
Feature Information
Secure Copy
12.2(2)T12.0(21)S
12.2(25)S
This feature was introduced in Cisco IOS Release 12.2(2)T.
This feature was integrated into Cisco IOS Release 12.0(21)S.
This feature was integrated into Cisco IOS Release 12.2(25)S.
The following commands were introduced or modified: debug ip scp, ip scp server enable.
Following is details Feature Information for Secure Shell Version 2 Support:
Feature Name
Releases
Feature Information
Secure Shell Version 2 Support
12.2(11)T
12.2(25)S
12.3(4)T
15.3(2)S
The Secure Shell Version 2 Support feature allows you to configure Secure Shell (SSH) Version 2 (SSH Version 1 support was implemented in an earlier Cisco IOS software release). SSH runs on top of a reliable transport layer and provides strong authentication and encryption capabilities. SSH version 2 also supports AES counter-based encryption mode.
The following commands were introduced or modified: debug ip ssh, ip ssh min dh size, ip ssh rsa keypair-name, ip ssh version, ssh.
Secure Shell Version 2 Client and Server Support
12.0(32)SY
12.3(7)JA
12.4(17)
The Cisco IOS image was updated to provide for the automatic generation of SNMP traps when an SSH session terminates.
SSH Keyboard Interactive Authentication
12.2(33)SXH3
12.4(18)
The SSH Keyboard Interactive Authentication feature, also known as Generic Message Authentication for SSH, is a method that can be used to implement different types of authentication mechanisms. Basically, any currently supported authentication method that requires only user input can be performed with this feature.
Secure Shell Version 2 Enhancements
12.2(50)SY
12.4(20)T
15.1(2)S
The Secure Shell Version 2 Enhancements feature includes a number of additional capabilities such as support for VRF-aware SSH, SSH debug enhancements, and DH Group 14 and Group 16 exchange support.
In Cisco IOS 15.1(2)S, support was added for the Cisco 7600 series router.
Note
Only the VRF-aware SSH feature is supported in Cisco IOS Release 12.2(50)SY.
The following commands were introduced or modified: debug ip ssh, ip ssh dh min size.
Secure Shell Version 2 Enhancements for RSA Keys.
15.0(1)M
15.1(1)S
The Secure Shell Version 2 Enhancements for RSA Keys feature includes a number of additional capabilities to support RSA key-based user authentication for SSH and SSH server host key storage and verification.
The following commands were introduced or modified: ip ssh pubkey-chain, ip ssh stricthostkeycheck.
-Thanks
Vinod
**Encourage Contributors. RATE Them.** -
I am using Iphone 3G and running with ios version 4.2.1 .I am looking for to run whatsup apps.Can you guide me which IOS version should i download wherein,it will support whatsup apps
with an iphone 3G the most up to date ios is 4.2.1 so you have a problem because whatsapp requires a higher version. If you saved an earlier version of whatsapp you could install that otherwise you cannot use the app. You will need to get a more up to date phone
-
I want to know my previous ios firmware version for iphone 4s because now I am using latest ios version 7.2 and I want to downgrade it but I don't know the previous version exactly for iphone 4 s
The iOS is 6.1.3, problem is Apple will not sign the file through iTunes to install it on the iPhone 4S.
-
IPad supported iOS version for development
Hi, i have a reference iPad (1) for development, running iOS 4.2.1, now i need to upgrade to 4.3 for testing, but iTunes wants me to download the latest (5.1).
In Organizer i can see that supported iOS versions are:
Xcode Supported iOS Versions
6.0 (10A403)
5.1
5.0
4.3
How can i get the 4.3 and install on my dev iPad?
Anyone managed to do this?
Thank you.Not possible.
Older versions of iOS are not available once a new version is released.
***** but that's the way it is.
About the only thing you can do is find a device that has the version of iOS you want and purchase it. -
Dear Experts,
I am wondering does SRST Version 8.0 on VG3945 IOS Version 15.1(1)T2 does it support 99XX sip phones on srst as per the sh call-manager-fallback the phone types 99XX are not included in the below list.
3945#sh call-manager-fallback
CONFIG (Version=8.0)
=====================
Version 8.0
Max phoneload sccp version 17
Max dspfarm sccp version 18
For on-line documentation please see:
http://www.cisco.com/en/US/products/sw/voicesw/ps4625/tsd_products_suppo...
ip source-address 10.10.5.50 port 2000
ip qos dscp:
ef (the MS 6 bits, 46, in ToS, 0xB8) for media
cs3 (the MS 6 bits, 24, in ToS, 0x60) for signal
af41 (the MS 6 bits, 34, in ToS, 0x88) for video
default (the MS 6 bits, 0, in ToS, 0x0) for serviceservice directed-pickup
max-ephones 1500
max-dn 2500
max-conferences 8 gain -6
dspfarm units 0
dspfarm transcode sessions 0
huntstop
no huntstop channel
huntstop channel 0
cnf-file location: system:
cnf-file option: PER-PHONE-TYPE
network-locale[0] US (This is the default network locale for this box)
network-locale[1] US
network-locale[2] US
network-locale[3] US
network-locale[4] US
user-locale[0] US (This is the default user locale for this box)
user-locale[1] US
user-locale[2] US
user-locale[3] US
user-locale[4] US
srst mode auto-provision is OFF
srst ephone template is 0
srst dn template is 0
srst dn line-mode single
time-format 12
date-format dd-mm-yy
timezone 31 Saudi Arabia Standard Time
secondary-dialtone 9
call-forward noan 37851 timeout 60
call-forward pattern .T
transfer-pattern .T
keepalive 30 auxiliary 30
timeout interdigit 10
timeout busy 10
timeout ringing 180
timeout transfer-recall 0
timeout ringin-callerid 8
timeout night-service-bell 12
caller-id name-only: enable
system message primary SRST MODE
system message secondary SRST MODE
Limit number of DNs per phone:
12SP: 76
7902: 76
7905: 76
7906: 76
7910: 76
7911: 76
7912: 76
7920: 76
7921: 76
7925: 76
7931: 76
7935: 76
7936: 76
7937: 76
7940: 76
7941: 76
7941GE: 76
7942: 76
7945: 76
7960: 76
7961: 76
7961GE: 76
7962: 76
7965: 76
7970: 76
7971: 76
7975: 76
7985: 76
anl: 76
ata: 76
bri: 76
CIPC: 76
vgc-phone: 76
IP-STE: 76
6921: 76
6941: 76
6961: 76
Log (table parameters):
max-size: 150
retain-timer: 15
transfer-system full-consult
transfer-digit-collect new-call
local directory service: enabled.
Extension-assigner tag-type ephone-tag.
configuration for SIP Phones:
voice service voip
registrar server
voice register global
max-dn 100
max-pool 42
voice register dn 1
number 23000
voice register dn 2
number 23001
voice register dn 3
number 23002
voice register pool 1
id network 10.10.6.20 mask 255.255.255.0
dtmf-relay h245-alphanumeric
codec g711alaw
voice register pool 2
id network 10.10.6.20 mask 255.255.255.0
dtmf-relay h245-alphanumeric
codec g711alaw
voice register pool 3
id network 10.10.6.20 mask 255.255.255.0
dtmf-relay h245-alphanumeric
codec g711alaw
does this configuration correct if anything else is need please add to it...
Thanks in advance.Dear ,
Please check the below configuration it should be working with SIP phones
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
sip
registrar server expires max 600 min 60
voice register global
system message SRST Active
max-dn 50
max-pool 19
voice register pool 1
id network xx.xx.xx.xx mask xx.xx.xx.xx
dtmf-relay rtp-nte cisco-rtp sip-notify
codec g711ulaw
no vad
sip-ua
registrar ipv4:yy.yy.yy.yy expires 600
On UCM SRST reference configuration for gateway
SIP Network/IP Address : yy.yy.yy.yy
SIP Port : 5060
for xx.xx.xx.xx insert the network ID
for yy.yy.yy.yy insert Gateway IP
Best Regards, -
Hi,
I am using the IOS version c5350-is-mz.124-10c.bin and I would like to check the 'feature set' on this IOS versin supports MS-CHAP v2.
I am not able to get to the page that has this information after trying this many times.
I would appreciate it if someone can help to show me to how to get to this page.
Thanking you in advance,
Cheers,
- sn -c5350-is-mz.124-10c does support MS-CHAP Version 2
Cisco Feature Navigator
http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp
HTH,
~Vaibhav
Cisco.com > Products & Services > Product Research Tools: > Cisco Feature Navigator -
Compatible 6500 IOS version to support IDSM-2 Inline mode
The 6500 model WS-SUP720-3BXL with IOS version 12.2(18)SXD4,
and IDS card WS-SVC-IDSM-2 with sw 5.0(2)is compatible to run on inline mode.
Regards,
VirajGood day,
Hi, You need minimum sup-bootdisk:s3223-advipservicesk9_wan-mz.122-18.SXF7.bin IOS to enable INLINE mode on 6500 series.
as per my knowledge,
the latest IOS is
sup-bootdisk:s3223-adventerprisek9_wan-mz.122-18.SXF13.bin.
for IDSM-2, if u upgrade to Engine 2 IOS, U can get update with E2 signatures and also U can manage from New Management Console like Cisco IPS manager Express 6.1.
I hope this will satisfy. -
i do not want to update my ios version, but an update of the application, mint requires ios 5. that is fine, but now i can't use the "update all" button if multiple application updates are pending. doing that will result in an error about my ios version, but it only applies to mint. how do i get around this. it is tedious going into each application update manually and clicking "update".
how do i get around this.
You can't get around it, that is the way the system works. You cannot alter it. When you upgrade to iOS 5 the issue will disappear.
Maybe you are looking for
-
Music won't sync onto my ipod touch 5?
please help!! i added some new music onto my itunes to put on my ipod touch 5 and when i tried to sync it last night it would never complete the process, getting stuck on step 6 of 6 for ages, eventually i gave up ejected it and thought i could wait
-
I keep getting an error that says "Connect to Computer Use iTunes to Restore". It is written in multiple languages. I connect to iTunes and restore. It may work fine for 20 playings, it may work correct for one, but I get the same error.
-
Hi, can i purchase and email an itunes voucher
Hi Just wanted to purchase and email an itunes voucher to someone who doesnt have PC access to itunes currently. Can i do this? Thanks in advance. xx
-
Problem with my tabular form report repeating columns
hello, i have a problem like, I have created a tabular form report and I have just copied the page to an another new page in the same application. once i copied the page to a new page, and when i tried to run the report the columns are repeating. I a
-
"HISTORY DATA"tab in address menu on customer overview page
Hi, In sap crm 6.0 system after you confirm the customer and go on to the customer overview page under the address menu, there is a tab "HISTORY DATA" which gives the details of all the addresses stored for the customer till date. In sap crm 7.0 sys