WLSE : validate target AP type ?

Hi,
Again, another question, where I have a doubt :
When upgrading the firmware on access points, the WLSE can perform which of the following functions?
A. Upgrade firmware, validate the target AP type and convert configurations from
VxWorks to IOS all at a scheduled time/date
B. Upgrade firmware, and convert configurations from VxWorks to IOS at a scheduled time/date
Does WLSE validate the target AP type ?
Thanks,
Navid

I would have to say yes it does
I accidentally tried to push a 1240 firm to a 1220 access point at it stopped me.
That seems like a validation to me
My 2 cents

Similar Messages

Error while updating to target 0PUR_C01 (type INFOCUBE)

Dear Friends
I am facing the problem while loading data through DTP from PSA to cube(Target).Problem occurring is at 0FISCPER.
The error shown is as below:
Data Package 2: Errors During Processing >>> Updating to InfoCube 0PUR_C01 >>
Error while updating to target 0PUR_C01 (type INFOCUBE)
Messages for 101 data records saved; request is red acc. to configuration
Processing Terminated
display for error records: No fiscal year variant specified
DTP request location:
Error Location: Operation Type: VAL_SID_CONVERT
Error Location: Operation Name: 0FISCPER
please give me helpful suggestion. I m w8ing for ur reply. I need ur needful comments.

Yes it is direct mapping with Entry date (SYDAT). But how should i solve this problem.
In PSA, for that Entry date giving the values:
11.02.2009
12.02.2009
13.02.2009
14.02.2009
16.02.2009
17.02.2009
18.02.2009
21.02.2009
23.02.2009
25.02.2009
03.03.2009
05.03.2009

ERROR ITMS-9000: "index_split_000.html(257): attribute "name" not allowed here; expected attribute "accesskey", "charset", "class", "coords", "dir", "href", "hreflang", "id", "rel", "rev", "shape", "style", "tabindex", "target", "title", "type" or "xml:la

I have all these errors, can anyone help with this all means? trying to get my book published in iBooks. Nedd your help. Thanks, Jo
ERROR ITMS-9000: "index_split_000.html(257): attribute "name" not allowed here; expected attribute "accesskey", "charset", "class", "coords", "dir", "href", "hreflang", "id", "rel", "rev", "shape", "style", "tabindex", "target", "title", "type" or "xml:lang"" at Book (MZItmspBookPackage)
Use of the block quote element can cause ePubecheck to give the error "text not allowed here". Text must not be alone inside of a body tag and if it is not enclosed in some other block level tag, this may lead to the error you are receiving.

I have all these errors, can anyone help with this all means? trying to get my book published in iBooks. Nedd your help. Thanks, Jo
ERROR ITMS-9000: "index_split_000.html(257): attribute "name" not allowed here; expected attribute "accesskey", "charset", "class", "coords", "dir", "href", "hreflang", "id", "rel", "rev", "shape", "style", "tabindex", "target", "title", "type" or "xml:lang"" at Book (MZItmspBookPackage)
Use of the block quote element can cause ePubecheck to give the error "text not allowed here". Text must not be alone inside of a body tag and if it is not enclosed in some other block level tag, this may lead to the error you are receiving.

Source port type for BPELProcess does not match target port type for EJB

Hi gurus,
I have a problem with calling EJBs from a 11.1.1.3 composite. The following summarizes the issue:
- there are several EJBs within the same package deployed on a WLS server.
- these beans have method names that are the same, for example create(), delete() etc.
- using the EJB Service Adapter I have created 3 References, one for each of the 3 beans I need to invoke in a BPEL process.
- each bean is imported into the project with their own *.wsdl *Ref.wsdl files.
- each wsdl imports a namespace based on the java package name
- now i have 3 wsdls, importing the same namespace and namespace conflicts arise.
At this point I'm thinking, 'no problem, just change the namespaces manually'
- whenever i try to change the namespace that JDev gives the Reference components I end up with the compilation error:
Source port type for "BPELProcess" does not match target port type for "EJBRef"
It seems that the namespace must be the same as the package name, even though I resolved all the references to the new namespaces and ensure they all match.
The problem appears to be in the BPELProcess.componentType file.
<reference name="HelloEJBRef" ui:wsdlLocation="HelloEJBRef.wsdl">
<interface.wsdl interface="http://package.workspace.com/HelloEJB#wsdl.interface(HelloEJB)"/>
</reference>
If the namespace (text before the #) is changed at all from the default, even if it matches the wsdl, results in the port type mismatch error above.
Any ideas?
btw, running SOA 11.1.1.3, JDev 10.1.1.3, EJB 3.0

Hi gurus,
I have a problem with calling EJBs from a 11.1.1.3 composite. The following summarizes the issue:
- there are several EJBs within the same package deployed on a WLS server.
- these beans have method names that are the same, for example create(), delete() etc.
- using the EJB Service Adapter I have created 3 References, one for each of the 3 beans I need to invoke in a BPEL process.
- each bean is imported into the project with their own *.wsdl *Ref.wsdl files.
- each wsdl imports a namespace based on the java package name
- now i have 3 wsdls, importing the same namespace and namespace conflicts arise.
At this point I'm thinking, 'no problem, just change the namespaces manually'
- whenever i try to change the namespace that JDev gives the Reference components I end up with the compilation error:
Source port type for "BPELProcess" does not match target port type for "EJBRef"
It seems that the namespace must be the same as the package name, even though I resolved all the references to the new namespaces and ensure they all match.
The problem appears to be in the BPELProcess.componentType file.
<reference name="HelloEJBRef" ui:wsdlLocation="HelloEJBRef.wsdl">
<interface.wsdl interface="http://package.workspace.com/HelloEJB#wsdl.interface(HelloEJB)"/>
</reference>
If the namespace (text before the #) is changed at all from the default, even if it matches the wsdl, results in the port type mismatch error above.
Any ideas?
btw, running SOA 11.1.1.3, JDev 10.1.1.3, EJB 3.0

Help with x64: fatal error LNK1112: module machine type 'X86' conflicts with target machine type 'x64'

Hello, I am trying to complie some C code for some applications I am working on in labview (I am using Labview 2012 64bit).
When I try to build my code in Visual C++ 2010 ( I have set it up to be able to use x64) I get the following fatal error:
nivision.lib(StartupShutdown.obj) : fatal error LNK1112: module machine type 'X86' conflicts with target machine type 'x64'
Which I understand that .lib does not have a 64bit compatability. However, if I were to use 32bit code, how can I link/emulate it to my 64bit labview? Is there a good tutorial on this application? The problem is the rest of my application uses and requires 64bit labview, so I am stuck in this enviroment.
Thanks.

dbrittain wrote:
Thanks for the reply. The C code I have cross correlates images, and it does reference the image inputs and size variables from the nivision classes. I am thinking of using a side by side labview environment with shared variables. I have not done this before, do you have any good examples? Can you make the library function node a shared variable or only the elements within it?
I guess I could try to convert to labview, but the are a lot of lines of code that I would prefer not to try to wrap my head around in translation.
The LabVIEW API in Vision Development Module has functions that let you get access to all those parameters as well as the raw image data pointer. A common design is to query those items on the LabVIEW diagram and then pass them to your DLL. This would mean you wouldn't need to make any calls into the Vision DLL from your C code.
As for examples showing how to use shared variables, keep in mind that it isn't just like doing a function call. The more appropriate way to think of it would be communicating with another VI by getting and setting controls and indicators while it runs. You could put all your arguments into a shared variable and set a boolean indicating it is ready, then wait for another boolean to go high indicating the other code has finished and placed its results in another shared variable. Your application code interacts with the shared variables just like a control/indicator/local variable. This of course is a simple description and I would not be surprised if there are well-defined frameworks/examples searchable in the forums that use shared variables in this manner.
Eric
Eric

I want to validate multiple input type=text with spry validation any one hepl me?

I want to validate multiple input type=text with spry validation any one hepl me?
my code is as below plz help me
*Professional Experience Years Months

Read;
http://labs.adobe.com/technologies/spry/articles/textfield_overview/index.html
http://labs.adobe.com/technologies/spry/widgets/textfieldvalidation/SpryValidationTextFiel d.html
and check out the samples:
http://labs.adobe.com/technologies/spry/samples/

Module machine type 'x64' conflicts with target machine type 'X86' - opencv_highgui

Hi ,
Im trying to setup the opencv for c++ in visual studio i have completed setting it up. when i run the sample code i get the error as
error LNK1112: module machine type 'X86' conflicts with target machine type 'x64
C++\FinalPro\FinalPro\opencv_highgui249d.lib(opencv_highgui249d.dll)
I have set also x64 instead of win32 default but still its not working the lib of open cv are all 64bit
Thank You , Shan Ali Khan

Hello,
Welcome to MSDN forum. But your issue is out of support range of VS General Question forum which mainly discusses
the usage of Visual Studio IDE such as WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
I found some thread with similar issues, maybe they can help you:
http://social.msdn.microsoft.com/Forums/en-US/34cf5a42-16a7-4d77-b708-0830276bbab9/module-machine-type-x86-conflicts-with-target-machine-type-x64?forum=vcgeneral
http://social.msdn.microsoft.com/Forums/en-US/d5bc5b38-6086-4f7c-a011-fc50901b9288/lnk1112-module-machine-type-x86-conflicts-with-target-machine-type-x64-error?forum=vcgeneral
If no help, for Visual C++ development issues please post them in
C++ forum, but those issues related to OpenCV which belongs to third-party are not supported in MSDN forums, you could consider consulting its publisher to get supports.
Thank you for your understanding.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Flat File as Target - MultiRecord Type

How do I write from Oracle into a Flat File as Target where the data in Flat file is a multirecord type. For ex. Sales Order header and Sales Order Line info.
I tried to do this by using a Joiner to the sales order header, line and items table and then mapping outgrp of joiner to the Flat file data with two record types in it. But when I generate and run this it could only create header records in out put file

Dear 396217,
As far as I am concerned you cannot really push out to a multi record structure without manual intervention.
There are a few things you can do: on the target (not sure whether that was already available in 9.0.3... but it definitely is in 9.0.4) you can set the flat file as a target to generate field names as headers. If that is what you want... then great.
The initial scenario: orders and order items in one model, is not supported. What you could do... is write a transformation to do this. Use calls to UTL_FILE to implement those and generate your own records. Primitive... but it works.
Alternatively, create 2 files and have a separate external process merge these. Not ideal; I realize that.
Mark.

Dynamic Determination of Target Messge Type (IDoc)

Hello,
we have a IDoc - HTTP scenario. A SYSTAT01 IDoc should be sent back to the sender system setting the status depending on the http response.
The basic scenario works fine, however depending on the value of one field there should be either a STATUS or ZSTATUS message type be sent back. Both are based on the SYSTAT01 IDoc structure and there absolutely no difference in the mapping logic. The two differet message types are used to handle inbound processing in SAP differently.
Question now is, whether I can set the output message type dynamically in ONE message mapping. I tried to set the field MESTYP in the control header, but this does not work, as the MESTYP obviously is always set according to the imported type.
Of course it would work using two different mappings, but I would rather handle ii

Hi,
you cannot change message type in the mapping
but you can have two target messages in one mapping and fill only one of them
Regards,
Michal Krawczyk

How to access Target field type, length from DT definition

I have defined the XSD Type (String, Number, Date..) and the length in the DT for the Target message
How do I access this info. in the mapping - so I can fill trailing spaces on String data, and zero-fill on Numeric data on the outbound XML MT ?
Thanks in advance!

Hi Satish,
Thanks for this info.
Exactly - I am trying to avoid Field length maintenance on every field level mapping.
Currently, I have a HashMap defined as follows..
empFieldLengthsMap = new HashMap();
// emp field lengths
empFieldLengthsMap.put("Record_Type","1");
empFieldLengthsMap.put("Movement_Type","1");
empFieldLengthsMap.put("Company_Code","3");
and then a UDF that yields me the size as follows from the map
String out = "";
out = (String) empFieldLengthsMap.get( targetField );
if (out == null || out.equals("") ) {
out = "0";
return out;
HOWEVER, I cannot get the target field to input into this UDF! Any ideas?
Mustafa
Edited by: Mustafa Dadawalla on Jul 15, 2010 11:44 AM

Validate by file type?

Is there a way to validate file type for images uploaded via a web form?
We need to restrict files to .jpg, .png, or .gif.
Thanks,
Tim

Hi Mike!
I did not find your BADI in the system I currently have access (maybe a release or installed package problem) - but still I like to give you a hint.
There is a class CL_GUI_FRONTEND_SERVICES with the method FILE_GET_SIZE. At least for a path/filename to a local file you can get the attributes of the file with this function.
Regards,
Christian

User exit name to validate the Trasactiopn type at t.code ABAON

Hi,
we need to validate the Posting date and Transaction type at transaction code ABAON (Enter Asset transactions).
Please help me which user exit can we use to validate this?
For T.code ABAON i checked the packeage name as 'AA'
based on the package, we found the below User exit names. Which can i use out of the below.
AAPM0001 Integration of asset accounting and plant maintenance
AFAR0003 External changeover method
AFAR0004 Determination of proportional values for retirement
AINT0004 Change amount posted for certain areas
AINT0005 Dummy for extended syntax check. Do not use.
AISA0001 Assign Inventory Number
AIST0001 Exchange number range in master data maintenance
AIST0002 Customer fields in asset master
AMSP0002 Determine relationship type for two company codes
TRAN0001 User exit for asset transfer
Please help us .
Thanks in advance,
Satya.

Hi Satyanarayana,
Why dont you try with Validations & Substitutions using GGB0.
For more information on Validation & Sustitutions follow below link:
Re: substitutions & validations
Regards
Abhii

Validate Materials according type of Purchase Requisition

Good morning.
At present the system we have several types of Purchase Requsitions (document created by the ME51N) that users can use (PR for Material, PR for contracts, PR for services, etc)
When creating the PR, the user chooses the PR type and write materials codes. The system is not Restrict the user to do things like, for a PR with type pshicical Materials, request a service material, which is obviously wrong and generate rework.
What we require is to know how to parameterize the system to validate that type of PR, only to order the materials associated with each type and do not let things like the example above.
We have the material well classified by Material Group and Purchase Group. I just need to know how to assign materials to each type of PR.
Research on this topic, I found the SPRO something I think I could serve.
SPRO -> Materials Management -> Purchasing -> PR -> Documents types
See here for example for PR ZS01 - PR Materials (used to order everything that is NOT services, ie physical materials), if I go to see the types of position allowed me see the following:
Code:
Tp.Pos | Text Pos Type
Normal
C Appropriation
L Outsourcing
I Wanted to third
Transfer V
F Service
I also see that all other types of PR of which there are established, have enabled the same kind of position.
Anyone know if this is why users can request a service for a material type PR Materials. o A physical material in a service PR?
Could Restrict through this that for example if the user creates a type PR SERVICE, only to enter service type material (a material through the group I guess)?
At last if i cant by parameterization, which I think is to create a Ztable with the association "MATERIAL - TYPE Purchase Requisition" and a field-exit to the fields where the materials are entered in PR to validate that the user typed material associated with this type of PR chosen and if that does not leave PR record. What I like about this solution is that the material planner will add a function over having to keep this updated Z table.
I would appreciate opinions.

Hi,
By using following BADI you can put a check while saving PR
You can put a check with reference to item category and document type , and material group of the entered material and PR document type , if required you can maintain Z table with allowed relationship or you can update the same in BADI
(BAdI) ME_REQ_POSTED, you can trigger a variety of follow-on processing operations for purchase requisitions at the time of posting
Thanks
Diwakar

How can i validate attribute(timestamp type) enter date day is not sunday.

hi All,
problem is that i want to validate timestamp type attribute. when user select a date if the date day is sunday than error message
show to user.
can i do this with groove expression.

You can add a script validation to the EO attribute and use an groovy expression like
def d = newValue;
println d.day;
return d.day != 0;
I only tested this with a date but it should work with a timestamp too...
Timo

In XPath routing system is showing the Target message type

hi all,
while givine XPath condition at receiver determination, it system is giving source structure, but i want to select field from target structure.
Plz help me its very very urgen.
POINTS will BE REWARDED.
regards
sreeni

Hi,
Try to use Interfaces determination to put the codtion.
Check some links on xpath.
/people/shabarish.vijayakumar/blog/2005/08/03/xpath-to-show-the-path-multiple-receivers
http://help.sap.com/saphelp_nw04/helpdata/en/43/a5f2066340332de10000000a11466f/content.htm
http://www.w3schools.com/xpath/default.asp
http://www.w3schools.com/xpath/xpath_operators.asp
/people/shabarish.vijayakumar/blog/2006/06/07/customise-your-xpath-expressions-in-receiver-determination
/people/suraj.sr/blog/2006/01/05/multiple-inbound-interfaces-within-a-service
Regards,
Phani
Reward points if Helpful

WLSE : validate target AP type ?

Similar Messages

Maybe you are looking for