WM 321 Posting change qa to unres for consignment materials

How can I realize automatic WM-transfer order / posting change processing for a quality to unrestricted posting (initated via QA11 record usage decision) of a consignment material?
I am able to realize the automatic posting change / transfer order processing for a non-consigment material (after QA11-usage decision). Therefore I have defined "321 / Posting change, quality" posting change WM/IM customizing.
To-be-process:
MIGO Goods receipt posting with reference to PO
QA11 Usage decision
LB11 Create Transfer Order / Place stock
The goal is that the user does not require a special WM-processing also for the consignment material related to Quality Management.
I am able to create the transfer order (based on posting change 321 quality to unrestricted / consignment) manually via LU04 but I am looking for automatic TO-creation /-confirmation.
Thank you in advance!

Please check the following configuration to make sure search strategy is complete for combination Stock Type Q (Quality) and Special Stock K (Consignment):
Logistics Execution > Warehouse Management > Interfaces > Define Quality Management > Activate QM Interim Storage Type Search
Example of settings:
WhN    Op...     TyInd...     Stock Cat.     Special Stock Ind.  QM Control     QM Control Desc.     1 Stor. Type  
100      E          ABC          Q                   K                            N                    no pop up                 917

Similar Messages

  • Report for consignment materials

    Hi SAP Gurus,
    Is there a report for consignment materials that can show us the opening balance, receipts, Usage, and ending balance (of the stock) for a given time frame?
    thanks
    Anusha

    This doesn't do any good. it just gives the vendor information. I'm not looking for this. I'm looking for a report or a t code which gives what the opening stock levels, receipts of stock, usage of stock and ending balance of stock for consignment materials for a given time period for a plant
    thanks
    Anusha

  • In MRP for changing MTO to MTS for raw materials

    Hi guys,
    I am getting one problem that i have changed for raw materials fron individual indiactor to clollective indicator to get its Purchase requistion for MTS. But in MD02 or IN MD04 it is still showing PR for individaul sales order in some cases.Can you pl.tell me why it is so.
    regards

    Please check the following..as Mat.master settings may be overrided as per below..
    You can maintain this indicator in the following places:
    In the material master record
    For the explosion type of the BOM item (in Customizing for Basic Data in Define Explosion Types)
    The setting for the explosion type overrides that in the material master record.
    Dependencies
    If the material is assigned to a material type that does not allow quantity-based inventory management in this plant, you can set the indicator to individual requirements only.
    If the stock is to be managed in sales order stock or project stock, the indicator must be set to one of the following options:
    Individual and collective requirements
    Individual requirements only
    If a material managed in project stock is to be procured from another plant using a cross-company-code stock transport order, the indicator must be set to 2 (collective requirements) in the issuing plant because, in this specific context, individual project stock management is not possible in both plants.

  • GI against cost center for consignment materials using BAPI_GOODSMVT_CREATE

    Hi ALL,
    Can anyone help me what are the necessary fields i need to pass in the BAPI_GOODSMVT_CREATE for issuing goodsagainst cost center from consignment bucket. I passed SPEC_STOCK as 'K' in the debugg mode for consigment materials but it didn't work. Can anyone give me some clue . Any pointer from any side will be highly appreciate.
    Thanks in Advance,
    Regards
    Azizur
    Edited by: Azizur Rahaman on Oct 23, 2009 4:54 PM

    Hello
    As far as i understand are you passing the parameter SPEC_STOCK and STCK_TYPE int the table line items...?
    Regards,
    Nabheet

  • Posting in gr from po for 2 materials in to 2 different movement types

    hi,
    i have 2 items in a single purchase order, how can i  post them to different movement types like 101, 103 in one goods receipt. for ex in MIGO , i enter purchase order number , it is taking all the items from PO in to one movement type like 101 .. and if i go to 2nd in  item over view and change the movement type to 103 and press enter it is coming to 101..
    pl advise me , how to do that,
    thanks in advance
    srini

    hi, thanks for quick reply, but i am entering goods receipt with referece to purchase order..  i am entering po number and movment type 101 in MIGO and pressing enter.. so all the materials in po being copied in to GR..and after that if i want to change the 2nd material to 103 it is not allowing me... it is considering all the materials belong to 101 only...
    so do i need to delete the rest of  the materials in GR and enter them individually? if i have 100 items in PO  belongs to diff mov types then do i have to enter GR 100 times? pl explain..
    thanks in advance .
    regards,
    srini komati

  • Inventory solution for consignment materials

    Hi:  My client is looking for a solution for the following scenario:
    1.  Consignment material Kit A is kept at the client location, and is made up of sub-parts, b, c, and d.
    2.  Material Kit A is issued, but then returned with some of the parts used (ie. part b).  Kit A is now only parts c and d.
    3.  Kit A (now with part B missing) is returned to the vendor, and part B is added back to the kit.  Kit A is now returned to the client location.
    Inventory needs to be managed at the Kit A level (not the sub-parts), and only the price of the sub-parts used need to be invoiced for.
    Any suggestions how to set this up?
    thanks
    Gail

    Hi,
    Please check Vacancy node..
    PAth..
    Flexible Real Estate-->>Master data --->> Usage View --->> Rental Unit --->> Vacancy
    Thanks
    Veman

  • Two TOs got created for a single Posting Change

    Dear All,
    A material document with movement type 309 got posted in a plant where WM is active.Here the material is moving from one batch to another batch.
    The material document has 100 items.For each item when this movement happens a Posting Change will get created in WM and this will get converted to TO immediately through background job.
    For all the materials except one  this is happening fine, ie if for example if the quantity in the material doc is say 100 PC,then posting change will get created for 100 PC  and this gets converted to single TO with 100 pc
    But for one materal , for a Posting change of qty 90, two TOs got created with same qty ie 90 pcs each.
    Please let me know your thoughts on this.What may be the reasons for this
    Regards
    Shyam

    Dear RK and Arakish,
    Thanks for the replies.
    But i think i need to expalin you the issue in detail.
    Problem Description:
    1) Single Posting change getting converted to two TOs with same quantity each
    2) Unable to go into display mode or change mode of Posting Change because of Error   message. u201CPosting change quantity less than quantity already postedu201D
    Message no. L2145
    Sceanrio:
    Material Document is posted with 309 movement,for moving a single material from single batch to different batches. The material document consists of 140 line items for the same material, but movement happening to 140 different batches.
    For example First line item of the material document corresponds to movement of the material
    From batch 1530040 to batch 71656W01 with quantity 105.438 DIE
    Second line item
    From batch 1530040 to batch 71656W02 with quantity 105.374 DIE
    For each line item, once the movement is posted in IM, corresponding Posting Change get posted in WM with the same Quantity. A background job converts Each Posting Change to single TO with same quantity.
    For example: For the first line item , Posting change 713513 got created with quantity 105.438 DIE which got converted to TO 1057743 with same quantity ie 105.438 DIE
    Issue:
    But only for one line item, the Posting Change with Quantity 90.901 DIE got converted to two TO s of quantity 90.901 each. And the posting change status is Partially Processed
    Because of this, we are not able to go inside the Posting Change neither in the Display mode or Change mode due to the above mentioned error message.
    Please let me know your thoughts on this
    Regards
    Shyam

  • Posting changes from EWM to ECC

    Hello dear experts
    When I create a posting change in EWM, for example to change stock type from F1 to F2, a message is sent to ERP using goods movement interface. Usually in ERP a 311 movement is created to move the stock from one storage location to another.
    Anyway, the HU data in ERP does not get updated. In HUMO you still see it in old storage location.
    Is it possible to generate a delivery in ECC from EWM posting change?
    I would like not to go through direct deliveries as they are creating STO in ERP and require a unique customer for each storage location, which is difficult because it would require changes to intecompany model .
    Does anyone have a solution?
    Thanks
    Best regards
    Carlo

    Hello Sathish
    To my understanding, when a posting change delivery itself is created in ERP and distributed (for example a DTR delivery type) the system finds a predecessor and uses delivery interface
    And also, when you are creating a posting change for an HU linked to a delivery, and the HU was not moved yet to a final storage type, /SPE/GOODSMVT_CREATE fm is called with reference to the delivery. This if you did the customizing for inbound deliveries under "Interfaces/ERPIntegration/Set Control Parameters for ERP Version Control
    In ERP you will see the posting change in document flow for delivery
    That's all I know..
    Best regards
    Carlo

  • How to create automatic Transfer Order for posting change delivery mvt.321?

    Hi,
    We are using HU with WM functionality; While posting stocks after UD, the system creates a posting change delivery instead of directly posting the stock to unrestricted stock from quality stock.
    Now that we have to process the ourbound delivery bu creating a transfer order and confirming it and also do a Post Goods Issue against delivery then only the system posts the stock into unrestricted stock.
    Our client doesn't want to go thro' these process steps. They would like the stock to be posted to unrestricted automatically after UD stock posting (movement type 321). Is there a way out to automatically process the posting change delivery in the background including Transfer order creation and confirmation and PGI please?
    Thank you,
    Regards,
    Madhavkrishnaa.

    Pls see the customizing.
    SPRO:  Logistic Excution>Warehouse management>interfaces-->Define Quality management

  • Immediate TO for posting change

    Hi,
    Is it possible to have immediate TO for posting change?
    I have done the following setting in LE-WM Interface to Inventory Management: Assigned the reference movement to WM movement and checked the indicator for Create transfer order immediately -A.
    I am able to manually convert the psoting change notice -> TO without any error. The system also works fine in case of Automatic TO. However the system does not create TO's immediately.
    I have one  more question: During Automatic / Immediate TO creation, how does the system know the affected stock? For ex.
    In case of transfer posting using 321, how will the system  select the source?
    Regards
    Deepak

    Hi,
    I think the following may apply to your issue.
    When you post a material document in IM, and movement types both "with" and "without" automatic transfer order creation exist in that document, the system does not start the automatic transfer order creation program.
    Check out this link: http://help.sap.com/saphelp_47x200/helpdata/en/c6/f85c504afa11d182b90000e829fbfe/frameset.htm

  • Maintain number range interval 01 for posting change notices

    Hi,
    I am doing transfer posting using movement type 321 (quality to unrestricted) for one material.While posting i am getting error"Maintain number range interval 01 for posting change notices" Message no. L0015
    WM is active for this material and doing this movement for one plant which is newly created in system.Wil you please advice for which document type i had to maintain number range.Please inform SPRO path / Transaction to be used to make required changes.
    Thanks & Regards
    Atharva

    Maintain number range for posting change in tcode  OMLW

  • Bin determination in automatic TO creation for posting changes

    Hello guys,
    could someone provide some information or some links on how the automatic bin determination for posting changes will be processed in SAP WM?
    Actually I'm looking for some further information for automated processing during a posting with movement type 309.
    What data from the posting change will be taken into account for the automated bin determination?
    Or is it 100 % comparable to the standard putaway / stock removal strategies?
    Thanks for some hints on that.

    Hi,
    I would like to add a point here that there is possibility of transmitting a screen widow to hav the value of GR number. You can do the settings  in OMLR in the AddlData for the appropriate Mvt (eg 321)
    This will cause to have the GR number to the PCN, which is compared with the GR no in the quant existing, while creating the TO wrt PCN.
    For eg: Material           Qty              Stk catgry                Bin                      GRno
                     A                  20                    Q                      B001                  5000000102
                     A                  40                    Q                      B003                  5000000140
    Now, when transfering the stock category form Quality to unrestricted, for 20 qty, a PCN will be created bforethat a pop-up screen flows in which u'll b giving the GR no as 5000000140.
    So u have the PCN for Qty 20, with GR no 5000000140.
    When u create a TO wrt PCN, system will pick the stock from the bin B003.
    I don't know how far this may light u.
    Reg
    Prasanna

  • No quants exist for posting changes. Creating TOu00B4s in LU04.

    When creating transfer orders in LU04, we get an error message "No quants exist for posting changes'. We are using batch managed and serialized materials. Using QM interface, so, inspection lots are created at Goods Receipt. When QM team "accepts" batch materials during inspection lot, there is no problem, but when "accepts" serialized materials, the system creates posting changes notices but can not create transfer orders sending the message before described. This is because after receiving the serialized materials, we receive one piece at a time in order to create one inspection lot for every serial number. But when we put away the materials, we put them away in the same bin. so, system assigns one quant and one inspection lot to the bin, updating the last one every time we put away one serial number. When system tries to look for the inspection lot number selected in QA32, is not finding it in the bin at WM level because the bin only contains the last inspection lot that was put it away.
    With batch managed numbers there is no problem since SAP divides the bin in different quants with the correspondent batches assigning an inspection lot to each quant.
    Is there any alternative to solve the issue with the serialized materials? We are using SAP ECC 6.0.
    Thanks for any help.

    Hi,
    The reason why we put away serialized materials into the same bin is because materials are physically small and they fit more than one in each bin. The warehouse is structured in this way and we plan to use it like that because it wouldn´t be feasible to create one bin for each serialized material. Is there any other way to manage this situation?
    Thanks in advance.

  • Transfer Order auto create for Posting Change not working

    Hello Gurus -
    When we release an inspection lot from "Q" status, it creates a posting change notice, and we have it configured to create a TO in the background to the same bin, and auto confirm.  The desired and intended result is to take something from "Q" status to unrestricted status, while keeping it in the same bin - and avoiding the user having to deal with the transfer orders.  Essentially it is seamless and all in the background, the user just sees that he has changed something from quality status to unrestricted.
    It works fine when the entire quantity is selected for the usage decision, but when a partial usage decision is made, the transfer order does not create - and requires processing in LU04 for the posting change.
    Why would this work for an entire qty, but not work for a partial qty - and simply require someone to go in to LU04 and hit "create transfer order" - with no additional information?
    Any help would be most appreciated.  Does it have something to do with a setting of quants?

    Hi,
    In case of a usage decision for a partial quantity, it is not possible to create the Transfer Order for the generated posting change notice automatically. This is only possible when the full quantity is released. The same happens if you release a partial quantity and post the rest to blocked stock or scrap. The reason is, there needs to be a user decision, which part of the quantity has to be posted, this is necessary for example when the quantity is distributed in the warehouse over many storage bins. But even if the full quantity is on one storage bin, there is no automatic TO creation. You can see this also in the online
    processing (LT05), in case of partial quantities you have to enter the selected quantity in the quant list, for a full posting this is not necessary.
    Hope this helps,
    Sinéad Curran

  • Error occurred during WM processing for posting change delivery

    Hi Experts,
    I am getting the following error when i try to create Outbound delivery aginst PO.
    "L9 612 Error occurred during WM processing for posting change delivery"
    Diagnosis
        The indicator AUFER from the delivery type contradicts the
        storage location constellation that was determined by the
        WM system.
        TVLK-AUFER = '<VAR2>'
        WM = '<VAR1>'
    1.Purchase order is Stock transport order ME21N ( UB)
    2.Try to create Outbound using VL10B and i am getting the above error,
    Thanks in advance.
    Cheers...Gopi

    Hi Gopi,
    Looking at problem you discribed, I am assuming you are using the delivery type other than "NL".
    The reason for this error is the indicator "order required" in delivery type defination set to 'X : sales order required' and you have assigned this delivery type to the purshasing document UB in STO customising. So the requirement of delivery defination of having prior document as sales order is conflicting.. so the error is there.
    Resolution:
    Please change the assigned delivery type to NL to purchasing document type UB in SPRO> MM> Purchase order>set up for STO>assign delivery type and checking rule.
    If you have custome delivery type the go to spro> LE> shipping>deliveries>define delivery type
    change the order required from X to "B".
    Hope this will help.
    Regards,
    Sudhir

Maybe you are looking for