WM : Automatic replenishment TO for fixed bin from warious storage types

Hi Gurus,
We have storage type 011 - fixed Bin storage type , 022 - self Storage and 055 - High Rack Storage. Also we have set up for automatic TO creation for fixed bin in fixed bin storage type when stock falls below minimum fixed bin quantity.
My problem is : system only creates TO when there is some stock in 055 - High Rack Storage. If there is no stock in 055 system doesn't create any TO. But there's lots of stock in 011( other than fixed bin) and 022.
we want system to serch for 055/ 022/ 011 sequence. So if there is no stock in 055, it should go for 022 and then 011.
Can anyone advise me on this? I will be really grateful.
Kind Regards
Raja Ram

Hi,
Can you please explain me the steps required to config the picking strategy for fixed bin replenishement?
Thanks & Regards
Raja Ram

Similar Messages

Stock transfer to physical bins from 998 storage type

Dear Experts,
As part of data conversion,After loading huge stock into SAP 998 st type into INITIAL bin,I want to move the stock into physical bins.I have SU management activated.
1)During the initial upload to 998 , I have taken Material slip field as storage bin coordinate in the external system, How would I move the stock into respective bins in SAP?
2) How would I map SAP bins with stock locations (counter part for storage bins in external system) ? So that I want to make sure , stock will be placed into the right bins.
3)What will be my approach for moving the stock into physical bins? Can it be through LSMW - LT01 with 999 movement type? Or is there any other method i can use?
4)Is there any tamplete to use for the above process? Do I need to develop any conversion program?
4) I want to print the storage units simultaneously during this process. How can I do this?
I really appreciate your help.
Thanks
Edited by: RKsap193 on Oct 14, 2008 10:35 AM

Hi,
I would suggest you to chek this link:
Re: Bin Number for the First Time Putaway
if you are not already live, then it should be possible to add the target bin field directly to the 311 movement. so you do not even need TOs to get the material into the bin for the WM go-live.
(Jurgen)
Regards,
Csaba

Replenishment for fixed bins in WM

Hello Experts,
I have a need to create auto TOs for replenishing fixed bins.If I am correct for auto TOs,i dont need to run LP21.
I have defined a custom WM movement type for 319.In the custom movement type I have defined source storage type and destination storagetype and selected Auto TO in background.
I have defined replenishment control for storage type-- entered the movement type and selected repleishment method '1'.
Can some one suggest me if i am missing some thing?
Do i need to define the search sequense as putaway to be directed to fixed bin storage type from other storage types?
Thanks in Advance

Hi,
Yes, you are correct, you need to define search sequence for the storage types and for the replenishment storage types as well.
Hope it is clear.
Aktar

Search for material from 2 Storage types

Hi,
When creating a delivery for Subcon PO Via ME2O the transfer order is created automatically from the source storage type
657 ( for example). The requirement is that the system should also look for material from source storage type 460 ( for example).
I did the following customization ( SPRO path):
1) Logistics execution -> Warehouse management -> Strategies -> Activate storage type search - > Determine search sequence --
For the combination of Warehouse number & Mvt type 541 ( GI to Subcon delivery) -- 657 and 460 are assigned.
2) Logistics execution -> Warehouse management -> Activities-> Transfers-> Define Mvt types-> For the combination of Warehouse number & Mvt type 541 -- I have assigned source storage type as 657.
With the above the system does the search from 657 stoarge type only and not from the both.
Is there any other setting to meet this requiremnet?
Best regards,
Prasad

Hi,
I removed 657 source storage type in the 541 mvt type set up ( Source storage type is Blank) . In the Movement Type set up for 541, "Ref.Stor.Type.Search" field is already with 541.
The Storage Type search sequence is maintained for the combination warehouse number & 541 mvt as 657 and 460 ( storage types).
When Delivery is created for Subcon PO, The Transfer order is not created automatcially ( Only delivery is created)
The requirement in detail is as below:
There are 2 plants ( AL70 & AL77) linked to 1 Warehouse (AL1). When delivery is created for subcon PO in plant AL70, the TO is also created automatically with source storage type as 657 and destination storage type as 916. The additional requirement is when delivery is created for Subcon PO in plant AL77, the TO aslo should be created automatically with source storage type as 460 and destination storage type as 916.
Regards,
Prasad

WM-Backflushed materials issued from different storage type

Hello my client has an issue in WH Service order issue
we face the problem that articles which are marked for back flushing aren't properly handled by the system with service orders. In normal production orders when the activity is closed on which the articles are set, the back flushing items are atomically issued from warehouse type 100 (location Backflush according to the rules set by LPK1,2,3) however when the activity of an Service order is closed the items are issued from warehouse type 914 creating and imbalance in WM. Please Is it a configuration issue or any other issue i should liik in to.
Kindly guide me to handle this.
Regards
Bheema

Hi,
Please check for service orders, yu should check CRATE parts and RELEASE ORDER parts. In their control cycles in LPK1/LPK2 you can define from which storage type / bin they are consumed when you book consumption against your PrdOrdservice order.
At the time of backflushing (in standard system) the components will go to 914+dynamic bin (or fixed bin, based on your settings). Normally TR creation is set on WM/IM interface and processing the TR you can move the components from WM to interim storage type 914. Thanking you.

High Level Bin Search, before Storage Type Search

Hi,
Can anyone help me to guide, which user Exit/Badi, be used for searching Empty bins, before storage type search. I come to know from one of colleague below message.
"" if you want to check the quantities on a higher level (before storage type search ), you can use the user exit "+++".""
I am unable to understand which kind of user exit "+++".
Background: Want to do putaway with storage type 007: Our high rack is having space (Bins) with different capacity. One rack can have 4 type of racks.
We want to putaway material with different bin types in one storage type.
Regards,
Mainsh Gupta

Hi Vijay,
Thanks for your quick reply. I am trying user exit given by you. Once again I would like to submit my requirements here.
a) We have 98 racks in Warehouse.
b) Product is Ball Bearing.
c) Bearings are handeled in Ea, Issue and Stock unit is Ea
d) Alternate Unit of Measure is Box, i.e. per box quantity is mentioned into Material Master.
e) Each Rack is having 5 different type of bins.
f) We want to fill rack from bottom to top for first rack, and then next rack.
g) Once we do putaway for any material, each time system should pick Next empty bin, and each bin type is different.
Case 1) If going with Storage Type 007:
                i) Need to maintain palletization data in Material master WM view 2.
               ii) Can not maintain any capacity check for Capacity utilization in Material Master. Capacity is only Pallatization data.
              iii) While creating TO, System goes for placemet of material from bottom to Top in Rack, but give similar quantity for each bin, & these quantities are defined from Material Master from Palletization data.
              iv) In this case it is not checking bin capacity.
My query:
i) How can we split quantity during TO Creation based on Next Empty Bin avaialbe with certain capacity and all further bins with other capacity.
ii) Can we have different type of bins in one storage type if we are going for Storage type 007. or it is mandatory to have similar kind of bins.
Case 2) If going for Storage type 002:
              i) Not maintined Palletiztaion data in Material master.
             ii) Maintining capacity check in WM View 1.
            iii) Maintained Capacity check in Bin master.
            iv) WHile careting TO , system doesnot spilt quantity for next empty bins avaialbe, Only one line item comes for whole quantities. and system throw an error.
Message Number: Message no. L3068
Message Details: Maximum quantity for storage bin TR-15 will be exceeded by 740.000 PC
My query: How can we split TO quantity as per next empty bins available.
If you will give me your contact number, I can speak to you over phone and eleborate in more details for your clear understanding my issue.
Regards,
Manish

How to transfer stock from one storage type another storage type

Hi Guys
I have 10 items
How can I transfer all in One Single Transfer order from one storage type to another storage type
I need to take TO print for all these 10 TO items

Hi,
Goto LT01 transaction with Movment type = 999 and stock category = Required stock category. Create a PCN and process the remaining process so as to change the stock type.
Regards,
Dilli Babu R

In GR, T331 entry for warehouse number GVW and storage type 916 not found

Hi friends,
while doing gr, it is giving following error. we are having wm
T331 entry for warehouse number GVW and storage type 916 not found
regards,
william

Hai,
Add the entry 0f 916 storage type to ur warehouse by copying from std i.e 001 in SPRO/Log Exe/WM/Master data/Define str type.
Regards,
BSK

Automatic Replenishment for Fixed Bins

Hi,
We have successfully implemented Automatic Replenishment for our Fixed Bins when Picking Transfer Order is Confirmed. We have used the scenario where full stock removal (a palletized quantity) is removed from the source bin and only the Replenishment quantity is placed in the destination bin with the difference quantity placed into a Return bin in a consolidation storage type. This is accomplished in a single Transfer Order. We use RF Scanning to confirm the Fixed Bin Replenishment.
Our problem now is the following:
There is no positive instruction that the full quantity must be removed from the Source bin and the remainder quantity placed into the Return bin.
Question:
Can the Replenishment Transfer Order be split automatically into two. One to Replenish the Fixed Bin and the other to move the remainder to the Return bin.
Our SAP system is: SAP R/3 Enterprise 4.7
Thanks and regards,
Mike

Hi,
Thank you for your prompt reply. Through all my investigation you have confirmed the conclusion that I suspected. Thank you.
Is there possibly a different solution? Is there a User Exit or Function Module that can be called/used to create another TO while creating the automatic replenishment TO? We could then use this separately to move the stock to the consolidation area.
Thanks,
Mike

Requirement date in reservation for Stock transfer from one storage locatio

Hi ALL,
I have activated the resevration creation by MRP for stock transfer from mail ware house to service storage location by creating MRP area for service storage location when there is requiremnt from service and when MRP is run on the MRP area the resevration in created and trasnfer order is created .but the requiremnt date in reservation is not the same asd of on service order.so kindly let me know why it is ahppening.

Hi,
check the GR processing time for the material . System may be adding GR processing time with reservation requirement to arrive at the service delivery date.
Regards,
Mrinal

How to remove the stock from 916 -storage type

Hi experts,
In LS25 for 916 storage type it is showing 30 & -20 Quantity for two Quants
How to remove the stock?
Regards
vr

the usual way to remove quants from 916 is by cancellation of the picking, which is done with LT0G transaction.
if the delivery is already goods issued, then you have to use LT01 to move the quants.
The positive quant of 30 quantity can be moved to the place where it phyiscally is.
the negative quant can only be eliminated by moving a quantity from a positive quant onto it. You should have a positive quant of this material in any bin of your warehouse. so you move from this bin to 916.

Create TO from Quality storage type

when i try to create TO for certain material through LU04 , the TO created but the source and the destination are the same ( the quality storage type ) see the details of the TO
2000012767 0001 1014654            Q   918 QUALITY2                250 KG 1
    AE50            02.08.2010         922 TR-ZONE                 250
2000012767 0002 1014654                922 TR-ZONE                 250 KG 1
    AE50            02.08.2010         918 QUALITY2                250
it should be the normaol storage type and the distination shold be the bin
how can i solve this problem

Pete,
You can also mention a specific qunatity in Material Master WM2 as LE quantity.
Once done you can go ahead with LT01 with Full quantity & that will split in multiple line Items.
Please use TO creation screen control as 1 i.e. Putaway prep that will help you to entre multiple destination Bins (if differs)
Thanks,
mahesh

Create multiple TO's from IM storage type

Bit rusty on SAP transactions.
If I have stock in a 'Differences' Storage Type (non-SU) that I want to bring back into storage on 30 different SU's is this possible?
Other than one by one using LT01. Can I use LT04 in some way?

Pete,
You can also mention a specific qunatity in Material Master WM2 as LE quantity.
Once done you can go ahead with LT01 with Full quantity & that will split in multiple line Items.
Please use TO creation screen control as 1 i.e. Putaway prep that will help you to entre multiple destination Bins (if differs)
Thanks,
mahesh

Combined TO for multiple deliveries and multiple storage types possible?

Folks,
I would need to have 1 pick TO for a shipment which has multiple deliveries and materials that are stored over several storge type. With stanrd SAP this is not posible. Any ideas wether this can be achieved through a user exit?
Regards,
MdZ

Hello MdZ,
If you can suggest me regarding TO for Group...
Using VL06O (outbound delivery monitor); If I create the TO for outbound delivery, it prints the pick-sheet for each storage type.
But if I attach the delivery to u2018WM groupu2019 and then create the u2018TO for Groupu2019 using VL06O it does not create any pick-sheet.
If you can suggest somethingu2026
Regards,
JPS

Config for Cucle Count method by storage type

Hi All,
We wanted to activate teh cycle counting inevnetory for some storage types. The pre-requisite is that assign the Inventory method ( ST, PZ etc.) to teh storage type. We are in ECC 6.0 and I don't see any indicator which I can assign to teh storage type. We do see only ST, PZ or blank i.e. no inventory.
Can anybody please help that where we can add the inventory method for cycle count so that we can assign it to the storage type?
Tahnks inadvance for any help.
regards,
KHAN

Hi,
Flag the box at the header leval i.e. cycle count
regards

WM : Automatic replenishment TO for fixed bin from warious storage types

Similar Messages

Maybe you are looking for