WM-Backflushed materials issued from different storage type

Hello my client has an issue in WH Service order issue
we face the problem that articles which are marked for back flushing aren't properly handled by the system with service orders. In normal production orders when the activity is closed on which the articles are set, the back flushing items are atomically issued from warehouse type 100 (location Backflush according to the rules set by LPK1,2,3) however when the activity of an Service order is closed the items are issued from warehouse type 914 creating and imbalance in WM. Please Is it a configuration issue or any other issue i should liik in to.
Kindly guide me to handle this.
Regards
Bheema

Hi,
Please check  for service orders, yu should check CRATE parts and RELEASE ORDER parts. In their control cycles in LPK1/LPK2 you can define from which storage type / bin they are consumed when you book consumption against your PrdOrdservice order.
At the time of backflushing (in standard system) the components will go to 914+dynamic bin (or fixed bin, based on your settings). Normally TR creation is set on WM/IM interface and processing the TR you can move the components from WM to interim storage type 914. Thanking you.

Similar Messages

  • One SO but I would like Post Goods Issue from different Storage Locations?

    Dear All,
    Pls help me solve this issue below:
    I have one SO, Item xzy, Qty = 300 but I would like to Post Goods Issue from different Storage Locations (Qty = 100 for each locations)
    E.g I have 3 storage locations: A, B, C and need to assign Post Goods Issue authorizations to 3 users U1, U2, U3:
    - U1 can Post Goods Issue from storage location A only (but cannot from B, C)
    - U2 can Post Goods Issue from storage location B only (but cannot from A, C)
    - U3 can Post Goods Issue from storage location C only (but cannot from A, B)
    How can I assign the Authorization for users?
    How can I create Outbound Delivery:
    a. 1 SO --> 1 outbound delivery --> Post GI 3 times
    b. 1 SO --> 3 outbound delivery --> Post GI
    Thank you very much for your support
    Cao Huy.

    Hi Senthils,
    Pls see my comment below:
    For Authorization check for storage Location
    1. GO to the following Menu path
    Spro>Material Management> Inventory manangement and Physical Inventory>Authorization Management>Authorization check for Storage Location.
    Here you have activate authorization tick for storage location and plant combination.
    --> Done
    2. Set authorization for Authorization object MM_MSEG_LGO thro Basis for the combination of movement type and storage location
    for each user.
    --> Done
    There are 3 storage locations(A,B,C) in one outbound delivery, and when user 01 tries to Post GI this outbound, it means that the system will Post GI for all line items in this outbound, but user 01 has not authorization for location B, C.
    How can user 01 Post GI from only location A in this outbound???
    And then user 02 will Post GI from only location B in this outbound,
    user 03 will Post GI from only location C in this outbound.
    Thanks
    Cao Huy

  • WM-PP : Backflush a material from different bins in the same storage Type

    Hi Gurus,
    We have a business scenarion where we do manual staging for production , the staging area has different bins within the same storage type for the same material, I am wondering if there is a way to backflush the material from different storage bins upon prod. order confirmation (using a control cycle?)
    Thanks
    Kris T

    Look like it's not possible using the SAP standard.

  • How to transfer stock from one storage type another storage type

    Hi Guys
    I have 10 items
    How can I transfer all in One Single Transfer order  from one storage type to another storage type
    I need to take TO print for all these 10 TO items

    Hi,
    Goto LT01 transaction with Movment type = 999 and stock category = Required stock category. Create a PCN and process the remaining process so as to change the stock type.
    Regards,
    Dilli Babu R

  • Different movement types for Goods Issue for different Order Types

    Hello Experts,
    Can we maintain different movement types for Goods Issue for different Order Types at the time of automatic creation of reservations?
    Thanks and regards,
    Satyajit

    Satyajit,
    Folow the link given,
    Re: How to add new movement types when creating reservation?
    Hope this helps you.
    SmanS

  • Search for material from 2 Storage types

    Hi,
    When creating a delivery for Subcon PO Via ME2O the transfer order is created automatically from the  source storage type
    657 ( for example). The requirement is that the system should also look for material from source storage type  460 ( for example).
    I did the following customization ( SPRO path):
    1) Logistics execution -> Warehouse management -> Strategies -> Activate storage type search - > Determine search sequence --
    For the combination of Warehouse number & Mvt type 541 ( GI to Subcon delivery) -- 657 and 460 are assigned.
    2)  Logistics execution -> Warehouse management -> Activities-> Transfers-> Define Mvt types-> For the combination of Warehouse number & Mvt type 541 -- I have assigned source storage type as 657.
    With the above the system does the search from 657 stoarge type only and not from the both.
    Is there any other setting to meet this requiremnet?
    Best regards,
    Prasad

    Hi,
    I removed 657 source storage type in the 541 mvt type set up ( Source storage type is Blank) . In the Movement Type set up for 541, "Ref.Stor.Type.Search" field is already with 541.
    The Storage Type search sequence is maintained for the combination warehouse number & 541 mvt as 657 and 460 ( storage types).
    When Delivery is created for Subcon PO, The Transfer order is not created automatcially ( Only delivery is created)
    The requirement in detail is as below:
    There are 2 plants ( AL70 & AL77)  linked to 1 Warehouse (AL1). When delivery is created for subcon PO in plant AL70, the TO is also created automatically with source storage type as 657 and destination storage type as 916. The additional requirement is when delivery is created for Subcon PO in plant AL77, the TO aslo should be created automatically with source storage type as 460 and destination storage type as 916.
    Regards,
    Prasad

  • Confirmation should not be allowed till materials issued from store

    Hello friends,
    I have a production order in which one material is issued automatically by Backflush function in confirmation and other material is issued manually. I want that confirmation must not be happen till materials are issued from store.
    Waiting for reply!
    Thanks!

    HI
    Check these BAdis for your requirement:
    WORKORDER_GOODSMVT
    RM_BFLUSH_GOODSMVT
    also if working in REM then check REM profile for incorrect goods MVt in OSP2 and in Discrete check OPK4 with your oreder type for termination of incorrect goods MVt
    Check and revert
    Regards
    Anupam Sharma

  • How to remove the stock from 916 -storage type

    Hi experts,
    In LS25 for 916 storage type it is showing 30 & -20 Quantity for two Quants
    How to remove the stock?
    Regards
    vr

    the usual way to remove quants from 916 is by cancellation of the picking, which is done with LT0G transaction.
    if the delivery is already goods issued, then you have to use LT01 to move the quants.
    The positive quant of 30 quantity can be moved to the place where it phyiscally is.
    the negative quant can only be eliminated by moving a quantity from a positive quant onto it. You should have a positive quant of this material in any bin of your warehouse.  so you move from this bin to 916.

  • Create multiple TO's from IM storage type

    Bit rusty on SAP transactions.
    If I have stock in a 'Differences' Storage Type (non-SU) that I want to bring back into storage on 30 different SU's is this possible?
    Other than one by one using LT01. Can I use LT04 in some way?

    Pete,
    You can also mention a specific qunatity in Material Master WM2 as LE quantity.
    Once done you can go ahead with LT01 with Full quantity & that will split in multiple line Items.
    Please use TO creation screen control as 1 i.e. Putaway prep that will help you to entre multiple destination Bins (if differs)
    Thanks,
    mahesh

  • Create TO from Quality storage type

    when i try to create TO for certain material through LU04 , the TO created but the source and the destination are the same ( the quality storage type ) see the details of the TO
    2000012767 0001 1014654            Q   918 QUALITY2                250  KG  1
        AE50            02.08.2010         922 TR-ZONE                 250
    2000012767 0002 1014654                922 TR-ZONE                 250  KG  1
        AE50            02.08.2010         918 QUALITY2                250
    it should be the normaol storage type and the distination shold be the bin
    how can i solve this problem

    Pete,
    You can also mention a specific qunatity in Material Master WM2 as LE quantity.
    Once done you can go ahead with LT01 with Full quantity & that will split in multiple line Items.
    Please use TO creation screen control as 1 i.e. Putaway prep that will help you to entre multiple destination Bins (if differs)
    Thanks,
    mahesh

  • WM : Automatic replenishment TO for fixed bin from warious storage types

    Hi Gurus,
    We have storage type 011 - fixed Bin storage type , 022  - self Storage and 055 - High Rack Storage. Also we have set up for automatic TO creation for fixed bin in fixed bin storage type when stock falls below minimum fixed bin quantity.
    My problem is : system only creates TO when there is some stock in 055 - High Rack Storage. If there is no stock in 055 system doesn't create any TO. But there's lots of stock in 011( other than fixed bin) and 022.
    we want system to serch for 055/ 022/ 011 sequence. So if there is no stock in 055, it should go for 022 and then 011.
    Can anyone advise me on this? I will be really grateful.
    Kind Regards
    Raja Ram

    Hi,
    Can you please explain me the steps required to config the picking strategy for fixed bin replenishement?
    Thanks & Regards
    Raja Ram

  • Creating pdfs from different file types (.doc,.xls etc) and merging them into a single pdf with book

    Hi,
    I need to create a pdf from 2 different file formats, for example .doc and .xls file and merge the contents of the two files into a single pdf.Also the final pdf created must contain bookmarks and links. Thanks in advance.
    Priyanka

    You can do this on the desktop using the Acrobat SDK as a custom plugin.
    You can do this on a server with Adobe LiveCycle PDF Generator.

  • Stock transfer to physical bins from 998 storage type

    Dear Experts,
    As part of data conversion,After loading huge stock into SAP 998 st type into INITIAL bin,I want to move the stock into physical bins.I have SU management activated.
    1)During the initial upload to 998 , I have taken Material slip field as storage bin coordinate in the external system, How would I move the stock into respective bins in SAP?
    2) How would I map SAP bins with stock locations (counter part for storage bins in external system) ? So that I want to make sure , stock will be placed into the right bins.
    3)What will be my approach for moving the stock into physical bins? Can it be through LSMW - LT01 with 999 movement type? Or is there any other method i can use?
    4)Is there any tamplete to use for the above process? Do I need to develop any conversion program?
    4) I want to print the storage units simultaneously during this process. How can I do this?
    I really appreciate your help.
    Thanks
    Edited by: RKsap193 on Oct 14, 2008 10:35 AM

    Hi,
    I would suggest you to chek this link:
    Re: Bin Number for the First Time Putaway
    if you are not already live, then it should be possible to add the target bin field directly to the 311 movement. so you do not even need TOs to get the material into the bin for the WM go-live.
    (Jurgen)
    Regards,
    Csaba

  • Stock transfer from 998 storage type to Physical bins

    Dear Experts,
    As part of data conversion,After loading huge stock into SAP 998 st type into INITIAL bin,I want to move the stock into physical bins.I have SU management activated.
    1)During the initial upload to 998 , I have taken Material slip field as storage bin coordinate in the external system, How would I move the stock into respective bins in SAP?
    2) How would I map SAP bins with stock locations (counter part for storage bins in external system) ? So that I want to make sure , stock will be placed into the right bins.
    3)What will be my approach for moving the stock into physical bins? Can it be through LSMW - LT01 with 999 movement type? Or is there any other method i can use?
    4)Is there any tamplete to use for the above process? Do I need to develop any conversion program?
    4) I want to print the storage units simultaneously during this process. How can I do this?
    I really appreciate your help.
    Thanks

    Answering your questions:
    1)During the initial upload to 998 , I have taken Material slip field as storage bin coordinate in the external system, How would I move the stock into respective bins in SAP?
    Use this info to load the stock into the correct storage bin
    2) How would I map SAP bins with stock locations (counter part for storage bins in external system) ? So that I want to make sure , stock will be placed into the right bins.
    Don't really understand what your doubt is, but if your MM/WM setup is correct, this should go OK
    3)What will be my approach for moving the stock into physical bins? Can it be through LSMW - LT01 with 999 movement type? Or is there any other method i can use?
    LSMW, with 'Standard batch/Direct Input' Object 0220 and Method 0000 (should be assigned to program RLBEST00).
    4)Is there any tamplete to use for the above process? Do I need to develop any conversion program?
    Based on previous answer, no!
    4) I want to print the storage units simultaneously during this process. How can I do this?
    Just assign the correct print code to the 561 movement type...but beware for the fact that a lot of labels will be generated at the same time and you can stuck your printer :s

  • Dependencies issue between different DC Type.

    Hello Colleagues,
    I have created a new Java DC and have exposed the content as a Public Part with purpose (compilation, assembly, infrastructure ).
    The contents are basically java files.
    Now both the DCs( J2EE and Service) are having dependencies on new java DC and also consuming it's public part.
    But I am not able to make out why J2EE DC is not able to assemble the new DC stuff and same jar is assembled by Service DC.
    Is there any rule like j2ee application(with DC Type visual composer plugin) cannot assemble  the java DC stuff ??
    Thanks & Regards,
    Kamlesh.

    Hi Jason,
        This sounds like Printer driver issue, you must be already aware that when you use LOCL, the system uses the driver installed on your local PC. Please check the device type for HB07
    Also check Note 8928 - List of supported printers/device types

Maybe you are looking for