WM-Error during search for WM movement type (261 )

HI FRIENDS
I HAVE THE ERROR DURING GOODS ISSUE FOR PRODUCTION ORDER...
PLS SUGGEST ME TO SOLVE THIS ISSUE
Error during search for WM movement type (261 )
Message no. L9 005
Diagnosis
A movement type of the Warehouse Management system and certain parameters are assigned to each movement type of the Inventory Management system.
In this case, no movement type of the Warehouse Management system was assigned to the Inventory Management movement type used by the parameters enclosed in parentheses in the error message.
Procedure
Contact your system administrator about this error. Note down the parameters in the error message and the situation that caused the error.
WIHT REGARDS
DINESH

Hi,
The IM and WM linkage may not be proper for the movement type. Maintain an entry for your warehouse with movement type 261 and Movment Indicator l combination in transaction OMLR. In the "Assign WM Movement Type References to IM Movement Types" section (button), change the "Reference Movement Type WM" to 261 (to match "Reference Mvmt Type" under button LE-WM "Interface to Inventory Management")
And also .....
Check in IMG Path - Enterprise Structure --> Assignment --> Logistis Execution --> Assign warehouse number to plant/storage location. I hope this will help you. Thanking you.

Similar Messages

Error during search for WM movement type (999 E )

Dear ALL,
I am try to reverse transaction 313. i use movement 314 but there is error message during creating delivery. the message is
"Error during search for WM movement type (999 E )"
Could someone help me please ?
Thanks & Best regrads,
Saiful arif

Hi,
Please check the reference movement type in table V_156S_WM for inventory movement 314 and for your case of qty and value update indicators
For qty updation indicator checked, you will have a reference movement type 3XX and not equal to 999
for qty updation indicator not checked, you will have reference movement type 999
qty updation indicator checked means stock / quantity controlled in which case
check your set up in transaction OMLR , reference movement 3XX from above table should be assigned to a proper WM movement type 3YY
then check for WM movement 3YY in Transaction OMLJ which should have source storage type maintained.
qty updation indicator not checked means stock / quantity not controlled or updated in which case reference movement type is 999 which has no maitenance in OMLR, moreover it is no stock / qty and no stock transfers situation
If 3XX happens to be 999 in your case, then check for 3YY movement in OMLR and check for storage type determination for 3YY in OMLJ
Please note 999 as WM movement is used for manual transfer within warehouse but not for warehouse movements resulting from IM.
Hope this should solve your problem.
Regds
Shrihari

Error during search for WM movement type (911)

Hi gurus,
I am using tx code MB1A (Mov type 911). When I try to save it I received the following error message:
"Error during search for WM movement type (911)"
any idea of this message?
Thanks in advance

The probable reason is that the storage location is Warehouse Managed and the system is not able to find a WM movement corresponding to the IM movement in the warehouse. Please check if the IM Movement type 911 mapped to a WM movement type for the warehouse in configuration?
Lakshman

Error during search for WM movement type (652 1 L )

Hi Guys,
For return order,we have created return delivery and PGR,Material Doc was created in the background TR and TO also created.Confirmed the TO.
Now we trying to reverse the PGR and Delivery from Transaction VL09,we are getting the following error.
Error during search for WM movement type (652 1 L )
Please reply ASAP,it's very urgent
Regards,
Kiran

insert this entry, it will work.
regards,
Yu

Error during search for movement type (953)

Hi All,
When I'm trying to issue goods to an internal order, I get the below error
Error during search for movement type (953)
The explanation is as follows
The movement type of the warehouse system and certain parameters are assigned to each movement type of the inventory management system
In this case no movement type of the warehouse management system was assigned to the inventory management movement type used by the paramaters enclosed in parantheses in the eror message.
Is there some config missing in this case?? Please let me know how to overcome this error
Regards,
Ashwin

when you create new movement types in MM, then you certainly have to create WM movement types too, if you want use the new movement types to post at a warehouse managed storage location.
This customizing needs to be done in IMG > LE > WM > Activities > transfers > define movement types
and
IMG > LE > WM > interfaces > inventory management > define movement types

Error during Goods Issue using movement type U61

Dear All,
There is this error with respect to goods movement type U61. It states u201C Difference in Object List header data: U61 previously /321 Newu201D
I get this error when I am doing the Goods issue using the transaction EM10 or MB1A
Any guidance or help is welcome
Regards
Balaji.J

Hi,
The goods issue movement type is 501, the previous movement type was also 501 only. The status of the device is in ESTO. By doing goods issue using movemenn type U61, I need to make them in to AVLB status.
Regards
Balaji.J

Error during creation of new movement types

hi frnds,
while creating a new movement type for 311 with z11....in help text tab..it is showing an error..
" Entry HULIST does not exist in TSTC (check entry) "...how do i resolve this.
Regards,
Prasath

Hey while copying the movement type to another use OMJJ
If any table entry is missing that can be maintained in SM30
Check it out
Regards,
Raman

Error in printout for mb1a movement type 221 for a particular plant

Hi All,
While printing through MB90 for the material document which processed through MB1A and movement type. The following error is appearing for only one particular plant , i am getting the following error.
Text ID F14 language EN not found
Message no. TD600
Diagnosis
You want to read a text which does not exist in the data base (or update memory).
System Response
Reading could not be carried out.
Procedure
You need to create this text:
1. Initialization (module INIT_TEXT)
2. Save (module SAVE_TEXT)
Please send me any solution if any gets same error.
Thanks,
Suresh.

Hi Bijay,
Thanks for your relpy. I tried to add the plant and storage location, I am getting the below error.
Entry LT91 does not exist in TSP03 (check entry)
Message no. 00058
Diagnosis
Input values must be defined in Table TSP03. The value or values 'LT91 ' are not specified in this table.
Procedure
Check whether the input is correct and correct if necessary.
Procedure for System Administration
If this is not an incorrect entry, check the system settings and change them if necessary.
If there is a connection to the Customizing system, you can maintain the system settings by choosing Customizing in the Performance Assistant or Maintain Entries (F5) when displaying the help in a modal dialog box.
Thanks,
Suresh.

PGI for STO movement type error Message no. L9005

Hi Gurus,
I have created an STO.Created delivery and confirmed TO.
Now while doing PGI,single step only(647 movement type),
system throws the following message,
"" Error during search for WM movement type (641 1 L K )
Message no. L9005 "".
As per my checking for both IM movement types 641 and 647, ' 641 ' has been assigned as
Ref movement type and " 601" has been assigned as WM movement type.
601 is maintained in WM.Should I maintain 641 in WM?That case I have to change SAP std settings..
If so pls provide me the details for 641 K.
Kindly help.
Best Regards

Hi Kumar,
Try the following:
Maintain an entry for your warehouse with movement type 641 SpStIn and Movment Indicator l combination in transaction OMLR.
And also ,
Check in IMG Path - Enterprise Structure --> Assignment --> Logistis Execution --> Assign warehouse number to plant/storage location.
Here check whether the warehouse number is assigned to your plant and storage location.
Thanks!
Preethi
Edited by: preethi R on Dec 2, 2008 10:50 AM
Edited by: preethi R on Dec 2, 2008 10:50 AM

How to set error message for 541 Movement type

Dear gurus,
            I want to know that is it possible to set error message through any configuration? My requirement is that when we create issue document using m.t 541 it will not allow me to process that document without releasing PO document.so for that i want to set error message.
<removed by moderator>
Message was edited by: Jürgen L

Hi,
   The subcontracting goods issue can be done even without PO reference. If your organization is strictly following the goods issue against PO only and you want to restrict the goods issue if the PO is not released, then you may check the below option. Please note that the below option is available in standard only from EHP 4 or above.
1. Refer the KBA: 1915825 - Transfer Posting reference to a Purchase Order in MIGO and activate the PO reference option in MIGO - Transfer posting.
2. Restrict the use of 541 movement in MB1B - Go to OMJJ and enter movement type as 541. Now go to "allowed transactions" folder and remove MB1B. Now the user cant use 541 in MB1B.
3. Maintain the field - Purchase order as mandatory field for the movement type 541 in OMJJ.
4. Train the users to use MIGO - Transfer Posting - Purchase order option for goods issue with 541 movement.
5. If the PO is not released, system wont allow to use the PO in MIGO - Transfer Postings.
6. If the user is selecting Transfer Posting - Other, system wont check the PO and hence it will allow to post the goods issue even if PO is not released. You may take organizational measures to restrict the usage or you may check for authorization concept - Refer the note: 773003 - MIGO: No authorization object for action/reference document
   If you are below EHP 4, there is no standard functionality available for the requirement as of my knowledge. If so, you may go for development to restrict the same.
Regards,
AKPT

Error during search occurred - com.sapportals.wcm.WcmException: An operatio

Upon clicking the SEARCH button, we are encountering the below error:
"Error during search occurred - com.sapportals.wcm.WcmException: An operation has failed on a file (create, delete, copy, move, ...);location=gb2ap320dia27:30013,location=gb2ap320dia27:30003 (Errorcode 16)"
Can anyone give me any idea about this error?

Hi robert, many thanks for your response.
I have checked on the Component Monitoring and everything is green. I find it weird, I am a newbie in TREX Search and Classification. Upon checking again on the error, it is pointing in the two locations for the error. Will I be able to find it in TREX Admin tool?
Another problem is that old files after TREX upgrade cannot be indexed anymore. I've tried assigning the data source to a newly created Index ID, but still only new files are indexed.
Many thanks for your help!

No vendor defined in Table T321 for ref. movement type 632

Hello Friends,
We are facing strage issue during trasfer movement from SAP ECC to SAP WM, the scenario is as follows -
For the Consignment returns (from Consignment stock to warehouse), we are using 632 movement type of transfer movement transaciton MB11. When executing the document, system showing the following error message -
No vendor defined in Table T321 for ref. movement type 632
We checked the entries, I am not able find the problem...Please suggest
Apreciate your feedback. Thanks
Best Regards,
Goutham

looks like your WM is defined as decentralized system.
The message number is L9 524
And system expects vendor number for the inbound deliveries.
I wonder anyhow why you are using MB11 transaction for 632 movement (which is an automatic movement triggered from a SD document)

How do I exclude directories from Finder search results? I'm trying to find the biggest FILES on my computer and it keeps showing me "Macintosh HD" as the biggest, how can I search for files of type "NOT folder/directory"?

Basically I've lost 10GB of free space over the last few weeks so my plan was to search for files modified in the last 2 weeks in order to figure out which ones are big and where that space went.
So I open finder, go to "File > Find", and enter a search:
Modified > In the last 2 weeks
All fine so far.
Problem is, it's showing whole directories as results. Which essentially means that when I order the list by size, Macintosh HD is at the top, followed by "Users", then "Applications", then one of my bigger movie files, then "Library", etc.
How can I do a search which will ignore folders? I want individual files. Knowing that Macintosh HD is the biggest item on my computer and was modified in the last 2 weeks is utterly useless to me.
Older versions of Finder in OS 9 had a feature where you could search for "files, whose type "IS NOT" folder", but OS X doesn't seem to have such a feature.
Can anyone help?

How much free space is on the HD, where has all the space gone?
OmniDiskSweeper is likely the easiest/best, and is now free...
http://www.omnigroup.com/applications/omnidisksweeper/download/

Sap notes for 103 movement type and 105 movement types in sap

Hi all,
Please let me know if there are any sap notes for 103 movement type and 105 movement type in sap as soon as possible
points will be awarded.
thanking u in advance,
srinivas.

There are many SAP notes related to these movement types e.g 514609,750836,
533833, 808029, 317823,etc.
You can search them at http://service.sap.com
Regards,
Amit

Error in BAPI_GOODSMVT_CREATE with movement type *261' after posting

Hi All,
After sucessfull posting of BAPI_GOODSMVT_CREATE with movement type *261' .
After posting ,while checking In mb51 document exists for it but checking in mmbe stock not reduced from resisticted stock.
Can you kindly tell the import parameter to be filled to over come this error.
Thank you.
Thanks,
AMS

Hi Himanshu/ Tejaswini Khante / Madhu,
Thank you all for your kind reply.
@Himanshu....I have tried with LWA_ITEM-STCK_TYPE = BLANK, Still it didnt work.
@Tejaswini Khante ...I checked the MMBE tcode, all the stocks are in 'Unrestricted use' only. The quality inspection, reserved fields are all blank. The materials are not Batch managed.
@Madhu...Yes, i discussed with the Functional, yet to find a possible solution.
Thanks & Regards
Rajesh

WM-Error during search for WM movement type (261 )

Similar Messages

Maybe you are looking for