WM implemention- for Existing HUM , Fin.Goods Delivery - Textiles Industy.

Dear WM Consultants,
Have to implement WM for Finished Goods warehouse for Textile Industry.
The client is alreay working on with Handling Unit Management for Delivery Doc creation Process.
Handling Units being used to pack different types of finished goods into one pack and create Delivery for customers.
would like to know whether is it possible to go ahead with WM implementation, without impacting the existing Handling Unit Set up and docs?. If implemented , how and what could be the strategy to handle this? to safe gaurd the previous HU docs
What are the major impacts over the existing HU management system ? if WM is implemented.What are the major points to be considered in the initial study.? from the point of Textile Industy Finished Products.
Rgds..
Ganapathi

Hi Ravi,
This is the standard functionality where the TO is created for picking based on storage type search - followed by storage bin search based on the startegy mentioned in config eg FIFO,LIFO etc. If you want the system to suggest pallets with complete boxes not partial first, then i think you will have to use userexit MWMTO007
Regards,
Vijay

Similar Messages

Why inbound delivery for when i click "goods movement tab" still A

Hi
Please clarify my doubt. I have a PO for which i did inbound delivery and did goods receipt through MIGO also for entire quantity. My doubt is that when i display inbound delivery after all this process and click on "goods movement tab" why the status still shows "A" not started instead of "C" i.e complete inspite of GR done for full quantity. Is there any setting. Please clarify this.
Dinakar

Hi
Please check how you did MIGO wrt to PO or Inbound delivery i.e. Shipping notification
Please check your PO details and config of SN
Kishor

Print GR slip for GR against an Outbound Delivery

Dear Experts,
I have a requirement as below.
Need to print GR slip for GR against an Outbound Delivery in VL02N (for Return Orders)
What setting needs to be done?
I donot see the GR slip check box in VL02N which normally exists in MIGO
However, i need to print GR slip for such GRs in VL02N
please help
regards,
Shetty

Re: Printout during Goods Receipt
See second, fourth reply and final post (which you've already found answer to via another thread).
Regards,
Nick

How can I get the material consumption of the month for each specific Finished Good?

(Sorry, I first opened this discussion in another space. I guess here's where it belongs).
Dear Experts,
This is the first time I open a discussion. I'm new at this. I've been reading for a couple of months your forums and certainly you've helped me a lot. Thanks for that. Keep it up! ^_^
Now on business. Let me explain a bit about what I'm looking for.
I've been looking for a report that shows me the material consumption of the month in quantities. Raw Material and Packaging Material to be more specific. Also I need to see the consumption of those materials by each specific Finished Good.
For example, I know the consumption of Flour of all the month, but we use it for all our Finished Goods or SKU's as we call them, since we make cookies. How can I know how much Flour each Finished Good actually used?
I've been trying with different T-Codes, reports, etc. The last thing I've got is using transaction MB51 and filtering movements type from 261 to 262. The beauty of this report is that shows me the Process Order number, since I can match the PO number to a Finished Good with another report from BI (or BEX, however you call it).
Everything was fine until I found that there are some PO's that are not directly related to a Finished Good, but to a Semi Finished Good. In some cases I'm able to match the Finished Good, since the majority of Semi Finished Goods are uniques to a Finished Good. But there are three specific cases that are my problem right now:
Cream X: We use it for three Finished Goods.
X Syrup: We use it for all the Finished Goods.
Refined X Sugar: We use it for three Finished Goods.
So those three are Semi Finished Goods which are related to certain numbers of PO's I have on the report.
In the end, with the report from MB51 I have all the list of materials (filtering only Raw and Packaging), I have the consumption of the month (filtering movements 261 and 262) and I have the PO number related to each material. Of course one material is listed many times on the report, but with different PO number.
Then, like I said, I can match the PO number to a Finished Good, except in the cases where the PO is not matched to a Finished Good, but to a Semi Finished Good like the three examples I gave you.
I don't know if there's another way to track the Finished Good having the PO number. I've tried T-Code COR3, but couldn't get too far.
I hope I explained myself a bit clear and also sorry if my English is not so good.
Thanks in advance. ^_^
Warm regards,
Rol

Hi Rolando,
If the purpose is to find the consumption of a material, you can get it from report "MC.9". Plz let me know if it's useful.
Rgds,
Sudheer.

While user is posting the goods delivery. He was getting error "Field selec

Hello
SAP Experts
i am getting an error
While user is posting the goods delivery. He was getting error "Field selection for movement type 981/account 1830200817(stock transfer account) differs for customer goods movement(015)" - Message no M7093.
Thanks & Regards
Narendra G

Hi Narendra,
Go to SE38 and run report RM07CUFA .This report gives you details as it compares FI and MM customizing ( mvmt type / acct G/L accnt no)
Either you have to change the setting of the GL or the movement type..as per business requirement.
This report will exactly give you which field has the conflict.
Probable some field is required in FI and suppressed in MM or vice versa.. check it out.
Regards,
SAPFICO

How to activate the new fields on material master(MM01/MM02/MM03) for existing Materials

Hi,
We have a requirement to add some custom fields as a new tab in additional data option(Descriptions, Unit of measure, etc.) in Basic data of Material master (MM01/MM02/MM03). I have successfully added and these custom fields and they are not part of standard(MARA, MARC) but a custom table and the updates are also done in custom table.
For new materials, I can see the new tab in additional data screens of basic data view and I could successfully create/change/display using MM01/MM02/MM03. However I cannot see the new tab/fields for existing materials in the system in all 3 tcodes (MM01/MM02/MM03). This is not a main view in material master so that I can extend it by MM01.
Is there any setting or mass generation program I have top perform so that I can see and maintain these new fields for existing materials. Appreciate any leads or help on this.
Thanks,
Harry

Hello Harry,
Goto t.code SPRO ---> Display IMG ---> Logistics - General --> Material master --> Configuring the material master --> Create program for customized screens
Use the above path and create the screen and assign it to the sequence using the below link as reference.
**************** - Tips - Implementing screen exits for MM01/MM02/MM03
Regards,
Thanga

Free Goods Delivery Control

I set up the master data to "E" , and for every 5pcs , they get 1 pc free (exculsive)
When I created Sales Order and Delivery of 10pcs, i get 2pcs additional item free.
In the delivery, if i change the delivery quantity to 9pcs, the free goods is still 2pcs. If i change the quantity to 5pcs, that's the time it is changed to 1pc.
How can we set-up such that if it is changed to 9pcs (less than 10pcs), then free goods should be reduced to 1pc.

HI Gemma
Its free goods delivery control,
in free goods there are two types , inclusive , exclusive free goods
inclusive free goods:=
system configure free goods in inclusive option like free goods quantity is going to be included in order quantity
EX- For 10 item is free ,the system configures free goods as 9+1
hope this will solve your problem
regards
venkat

Have Adobe Standard CS 5 (Student), and would like to upgrade to Creative Cloud (Non-Student) - won't accept my serial number for special pricing for existing users

I currently use Adobe Standard CS 5. It was bought with the Education discount. I would like to upgrade to Creative Cloud and see that they have special pricing for existing customers that use past versions of Creative Suite. I am no longer in Education, so I will have to buy a full version. This is fine, but it won't accept my serial number for the discounted pricing. Is there something else I should be doing?

Hi there
Please contact our Sales team who will assist with your order - 800-585-0774
Thanks
Bev

Movement type for free of charge good issue

Hi,
Does anybody know what is the movement type for free of charge good issue??
I want to know the equivalent movement type of good receipt 511 (delivery w/o charge) but for good issue.
Thanks.

Hi,
Thanls for your reply but this is not what we need.
We want to do a manual good issue without charge and we don't know what is the correct movement type we have to use.
I have tried to use 601 in mb1a transaction but an error has appeared: "Goods movement not possible with mvmt type 601"
I think we need the equivalent movement of good receipt 511 but for good issue.
Thanks!!

Bapi to be used for delivering data of outbound delivery to LDL

Hi,
I am new to ABAP development and I need to do some enhancements for standard bapi BAPI_OUTB_DELIVERY_SAVEREPLICA .
I have to use bapi for delivering data of outbound delivery to LDL.
I have created segments with additional fields for order header and item header in we31.
The additional fields should be implemented in created segments.After creating segments the additional fields data should be assigned to Idoc structure OBDLV.
This is the requirement I need to deliver by tomorrow.Please help me by providing step by step procedure and how to do?
Thanks in advance
Raj

Dear Venkat,
for cancelling GI/GR you may use BAPI_GOODSMVT_CREATE with GM_Code 06
for cancelling confirmations you may use BAPI_PRODORDCONF_CANCEL
Regards, Andreas

Best practice for existing target table

We want to develop mappings for existing target tables.
1. The tables are imported from the datadictionary
2. The tables are used in the mappings
Is it a good idea to set deploy to no for these tables, to prevent them from beeing used by the deplomentmanager (default action:create)?
Thanks your for a good practice
Stp
Message was edited by:
user444776
Message was edited by:
user444776

Hi,
Yes, you are right. for the tables which already exist in the database schema the deployment actions should be "None". Unless you planned and made any changes to the table structures.
Cheers
Mahesh

SAP Fiori Apps Error Task Facade not implemented for provider. [/IWBEP/CX_MGW_TECH_EXCEPTION].

Dear All
I am getting the below error while activating the sap Fiori applications
Task Facade not implemented for provider. [/IWBEP/CX_MGW_TECH_EXCEPTION] (error).
I have applied all suggestions in my new fiori system from Masayuki Sekihara posted on his post.
but still I am getting same error message.
I got below error message.
1) If I selected a EC6FIORI system alias to ZTASKPROCESSING services then i got below error message.
Task Facade not implemented for provider.
Task Facade not implemented for provider. [/IWBEP/CX_MGW_TECH_EXCEPTION] (error).
2) some time I got different error message if I selected FIORI system alias to ZTASKPROCESSING.
I have shared below my system Support Package level and all configurations.
Component
Release
SP-Level
Support Package
Short description of comment
SAP_BASIS
740
4
SAPKB74004
SAP Basis Component
SAP_ABA
740
4
SAPKA74004
Cross-Application Component
SAP_GWFND
740
6
SAPK-74006INSAPGWFND
SAP Gateway Foundation
SAP_UI
740
7
SAPK-74007INSAPUI
User Interface Technology
PI_BASIS
740
4
SAPK-74004INPIBASIS
Basis Plug-In
ST-PI
2008_1_700
8
SAPKITLRD8
SAP Solution Tools Plug-In
SAP_BW
740
4
SAPKW74004
SAP Business Warehouse
IW_PGW
100
5
SAPK-10005INIWPGW
Process Gateway
MDG_FND
747
2
SAPK-74702INMDGFND
MDG Foundation
SAP_AP
700
30
SAPKNA7030
SAP Application Platform
SAP_BS_FND
747
2
SAPK-74702INSAPBSFND
SAP Business Suite Foundation
WEBCUIF
747
2
SAPK-74702INWEBCUIF
SAP Web UI Framework
MDG_APPL
617
2
SAPK-61702INMDGAPPL
MDG Applications
SAP_APPL
617
2
SAPKH61702
Logistics and Accounting
SAP_FIN
617
2
SAPK-61702INSAPFIN
SAP_FIN
SAP_HR
604
66
SAPKE60466
Human Resources
SAP_HRCAR
604
66
SAPK-60466INSAPHRCAR
Sub component SAP_HRCAR of SAP_HR
SAP_HRCAT
604
66
SAPK-60466INSAPHRCAT
Sub component SAP_HRCAT of SAP_HR
SAP_HRCAU
604
66
SAPK-60466INSAPHRCAU
Sub component SAP_HRCAU of SAP_HR
SAP_HRCBE
604
66
SAPK-60466INSAPHRCBE
Sub component SAP_HRCBE of SAP_HR
SAP_HRCBR
604
66
SAPK-60466INSAPHRCBR
Sub component SAP_HRCBR of SAP_HR
SAP_HRCCA
604
66
SAPK-60466INSAPHRCCA
Sub component SAP_HRCCA of SAP_HR
SAP_HRCCH
604
66
SAPK-60466INSAPHRCCH
Sub component SAP_HRCCH of SAP_HR
SAP_HRCCL
604
66
SAPK-60466INSAPHRCCL
Sub component SAP_HRCCL of SAP_HR
SAP_HRCCN
604
66
SAPK-60466INSAPHRCCN
Sub component SAP_HRCCN of SAP_HR
SAP_HRCDE
604
66
SAPK-60466INSAPHRCDE
Sub component SAP_HRCDE of SAP_HR
SAP_HRCDK
604
66
SAPK-60466INSAPHRCDK
Sub component SAP_HRCDK of SAP_HR
SAP_HRCES
604
66
SAPK-60466INSAPHRCES
Sub component SAP_HRCES of SAP_HR
SAP_HRCFI
604
66
SAPK-60466INSAPHRCFI
Sub component SAP_HRCFI of SAP_HR
SAP_HRCFR
604
66
SAPK-60466INSAPHRCFR
Sub component SAP_HRCFR of SAP_HR
SAP_HRCGB
604
66
SAPK-60466INSAPHRCGB
Sub component SAP_HRCGB of SAP_HR
SAP_HRCHK
604
66
SAPK-60466INSAPHRCHK
Sub component SAP_HRCHK of SAP_HR
SAP_HRCID
604
66
SAPK-60466INSAPHRCID
Sub component SAP_HRCID of SAP_HR
SAP_HRCIE
604
66
SAPK-60466INSAPHRCIE
Sub component SAP_HRCIE of SAP_HR
SAP_HRCIN
604
66
SAPK-60466INSAPHRCIN
Sub component SAP_HRCIN of SAP_HR
SAP_HRCIT
604
66
SAPK-60466INSAPHRCIT
Sub component SAP_HRCIT of SAP_HR
SAP_HRCJP
604
66
SAPK-60466INSAPHRCJP
Sub component SAP_HRCJP of SAP_HR
SAP_HRCKR
604
66
SAPK-60466INSAPHRCKR
Sub component SAP_HRCKR of SAP_HR
SAP_HRCKW
604
66
SAPK-60466INSAPHRCKW
Sub component SAP_HRCKW of SAP_HR
SAP_HRCMX
604
66
SAPK-60466INSAPHRCMX
Sub component SAP_HRCMX of SAP_HR
SAP_HRCMY
604
66
SAPK-60466INSAPHRCMY
Sub component SAP_HRCMY of SAP_HR
SAP_HRCNL
604
66
SAPK-60466INSAPHRCNL
Sub component SAP_HRCNL of SAP_HR
SAP_HRCNO
604
66
SAPK-60466INSAPHRCNO
Sub component SAP_HRCNO of SAP_HR
SAP_HRCNZ
604
66
SAPK-60466INSAPHRCNZ
Sub component SAP_HRCNZ of SAP_HR
SAP_HRCPH
604
66
SAPK-60466INSAPHRCPH
Sub component SAP_HRCPH of SAP_HR
SAP_HRCPT
604
66
SAPK-60466INSAPHRCPT
Sub component SAP_HRCPT of SAP_HR
SAP_HRCQA
604
66
SAPK-60466INSAPHRCQA
Sub component SAP_HRCQA of SAP_HR
SAP_HRCRU
604
66
SAPK-60466INSAPHRCRU
Sub component SAP_HRCRU of SAP_HR
SAP_HRCSE
604
66
SAPK-60466INSAPHRCSE
Sub component SAP_HRCSE of SAP_HR
SAP_HRCSG
604
66
SAPK-60466INSAPHRCSG
Sub component SAP_HRCSG of SAP_HR
SAP_HRCTH
604
66
SAPK-60466INSAPHRCTH
Sub component SAP_HRCTH of SAP_HR
SAP_HRCTW
604
66
SAPK-60466INSAPHRCTW
Sub component SAP_HRCTW of SAP_HR
SAP_HRCUN
604
66
SAPK-60466INSAPHRCUN
Sub component SAP_HRCUN of SAP_HR
SAP_HRCUS
604
66
SAPK-60466INSAPHRCUS
Sub component SAP_HRCUS of SAP_HR
SAP_HRCVE
604
66
SAPK-60466INSAPHRCVE
Sub component SAP_HRCVE of SAP_HR
SAP_HRCZA
604
66
SAPK-60466INSAPHRCZA
Sub component SAP_HRCZA of SAP_HR
SAP_HRGXX
604
66
SAPK-60466INSAPHRGXX
Sub component SAP_HRGXX of SAP_HR
SAP_HRRXX
604
66
SAPK-60466INSAPHRRXX
Sub component SAP_HRRXX of SAP_HR
EA-IPPE
400
24
SAPKGPID24
SAP iPPE
EA-APPL
617
2
SAPK-61702INEAAPPL
SAP Enterprise Extension PLM, SCM, Financials
EA-DFPS
600
24
SAPKGPDD24
SAP Enterprise Extension Defense Forces & Public Security
EA-FIN
617
2
SAPK-61702INEAFIN
EA-FIN
EA-FINSERV
600
25
SAPKGPFD25
SAP Enterprise Extension Financial Services
EA-GLTRADE
600
24
SAPKGPGD24
SAP Enterprise Extension Global Trade
EA-HR
607
17
SAPK-60717INEAHR
SAP Enterprise Extension HR
EA-HRCAR
607
17
SAPK-60717INEAHRCAR
Sub component EA-HRCAR of EA-HR
EA-HRCAT
607
17
SAPK-60717INEAHRCAT
Sub component EA-HRCAT of EA-HR
EA-HRCAU
607
17
SAPK-60717INEAHRCAU
Sub component EA-HRCAU of EA-HR
EA-HRCBE
607
17
SAPK-60717INEAHRCBE
Sub component EA-HRCBE of EA-HR
EA-HRCBR
607
17
SAPK-60717INEAHRCBR
Sub component EA-HRCBR of EA-HR
EA-HRCCA
607
17
SAPK-60717INEAHRCCA
Sub component EA-HRCCA of EA-HR
EA-HRCCH
607
17
SAPK-60717INEAHRCCH
Sub component EA-HRCCH of EA-HR
EA-HRCCL
607
17
SAPK-60717INEAHRCCL
Sub component EA-HRCCL of EA-HR
EA-HRCCN
607
17
SAPK-60717INEAHRCCN
Sub component EA-HRCCN of EA-HR
EA-HRCDE
607
17
SAPK-60717INEAHRCDE
Sub component EA-HRCDE of EA-HR
EA-HRCDK
607
17
SAPK-60717INEAHRCDK
Sub component EA-HRCDK of EA-HR
EA-HRCES
607
17
SAPK-60717INEAHRCES
Sub component EA-HRCES of EA-HR
EA-HRCFI
607
17
SAPK-60717INEAHRCFI
Sub component EA-HRCFI of EA-HR
EA-HRCFR
607
17
SAPK-60717INEAHRCFR
Sub component EA-HRCFR of EA-HR
EA-HRCGB
607
17
SAPK-60717INEAHRCGB
Sub component EA-HRCGB of EA-HR
EA-HRCHK
607
17
SAPK-60717INEAHRCHK
Sub component EA-HRCHK of EA-HR
EA-HRCID
607
17
SAPK-60717INEAHRCID
Sub component EA-HRCID of EA-HR
EA-HRCIE
607
17
SAPK-60717INEAHRCIE
Sub component EA-HRCIE of EA-HR
EA-HRCIN
607
17
SAPK-60717INEAHRCIN
Sub component EA-HRCIN of EA-HR
EA-HRCIT
607
17
SAPK-60717INEAHRCIT
Sub component EA-HRCIT of EA-HR
EA-HRCJP
607
17
SAPK-60717INEAHRCJP
Sub component EA-HRCJP of EA-HR
EA-HRCKR
607
17
SAPK-60717INEAHRCKR
Sub component EA-HRCKR of EA-HR
EA-HRCKW
607
17
SAPK-60717INEAHRCKW
Sub component EA-HRCKW of EA-HR
EA-HRCMX
607
17
SAPK-60717INEAHRCMX
Sub component EA-HRCMX of EA-HR
EA-HRCMY
607
17
SAPK-60717INEAHRCMY
Sub component EA-HRCMY of EA-HR
EA-HRCNL
607
17
SAPK-60717INEAHRCNL
Sub component EA-HRCNL of EA-HR
EA-HRCNO
607
17
SAPK-60717INEAHRCNO
Sub component EA-HRCNO of EA-HR
EA-HRCNZ
607
17
SAPK-60717INEAHRCNZ
Sub component EA-HRCNZ of EA-HR
EA-HRCPH
607
17
SAPK-60717INEAHRCPH
Sub component EA-HRCPH of EA-HR
EA-HRCPT
607
17
SAPK-60717INEAHRCPT
Sub component EA-HRCPT of EA-HR
EA-HRCQA
607
17
SAPK-60717INEAHRCQA
Sub component EA-HRCQA of EA-HR
EA-HRCRU
607
17
SAPK-60717INEAHRCRU
Sub component EA-HRCRU of EA-HR
EA-HRCSE
607
17
SAPK-60717INEAHRCSE
Sub component EA-HRCSE of EA-HR
EA-HRCSG
607
17
SAPK-60717INEAHRCSG
Sub component EA-HRCSG of EA-HR
EA-HRCTH
607
17
SAPK-60717INEAHRCTH
Sub component EA-HRCTH of EA-HR
EA-HRCTW
607
17
SAPK-60717INEAHRCTW
Sub component EA-HRCTW of EA-HR
EA-HRCUN
607
17
SAPK-60717INEAHRCUN
Sub component EA-HRCUN of EA-HR
EA-HRCUS
607
17
SAPK-60717INEAHRCUS
Sub component EA-HRCUS of EA-HR
EA-HRCVE
607
17
SAPK-60717INEAHRCVE
Sub component EA-HRCVE of EA-HR
EA-HRCZA
607
17
SAPK-60717INEAHRCZA
Sub component EA-HRCZA of EA-HR
EA-HRGXX
607
17
SAPK-60717INEAHRGXX
Sub component EA-HRGXX of EA-HR
EA-HRRXX
607
17
SAPK-60717INEAHRRXX
Sub component EA-HRRXX of EA-HR
EA-PS
600
24
SAPKGPPD24
SAP Enterprise Extension Public Services
EA-RETAIL
600
24
SAPKGPRD24
SAP Enterprise Extension Retail
FINBASIS
600
24
SAPK-60024INFINBASIS
Fin. Basis
ECC-DIMP
600
23
SAPK-60023INECCDIMP
DIMP
ERECRUIT
600
24
SAPK-60024INERECRUIT
E-Recruiting
FI-CA
600
23
SAPK-60023INFICA
FI-CA
FI-CAX
600
23
SAPK-60023INFICAX
FI-CA Extended
HR-CEE
110_604
52
SAPK-60452INHRCEE
HR country version for CEE countries
HR-CEECBG
110_604
52
SAPK-60452INHRCEECBG
Sub component HR-CEECBG of HR-CEE
HR-CEECCO
110_604
52
SAPK-60452INHRCEECCO
Sub component HR-CEECCO of HR-CEE
HR-CEECCZ
110_604
52
SAPK-60452INHRCEECCZ
Sub component HR-CEECCZ of HR-CEE
HR-CEECGR
110_604
52
SAPK-60452INHRCEECGR
Sub component HR-CEECGR of HR-CEE
HR-CEECHR
110_604
52
SAPK-60452INHRCEECHR
Sub component HR-CEECHR of HR-CEE
HR-CEECHU
110_604
52
SAPK-60452INHRCEECHU
Sub component HR-CEECHU of HR-CEE
HR-CEECPL
110_604
52
SAPK-60452INHRCEECPL
Sub component HR-CEECPL of HR-CEE
HR-CEECRO
110_604
52
SAPK-60452INHRCEECRO
Sub component HR-CEECRO of HR-CEE
HR-CEECSI
110_604
52
SAPK-60452INHRCEECSI
Sub component HR-CEECSI of HR-CEE
HR-CEECSK
110_604
52
SAPK-60452INHRCEECSK
Sub component HR-CEECSK of HR-CEE
HR-CEECTR
110_604
52
SAPK-60452INHRCEECTR
Sub component HR-CEECTR of HR-CEE
HR-CEECUA
110_604
52
SAPK-60452INHRCEECUA
Sub component HR-CEECUA of HR-CEE
HR-CEEGXX
110_604
0
Sub component HR-CEEGXX of HR-CEE
HR-CEERXX
110_604
0
Sub component HR-CEERXX of HR-CEE
INSURANCE
600
23
SAPK-60023ININSURANC
SAP Insurance
IS-CWM
600
23
SAPK-60023INISCWM
Industry Solution Catch Weight Management
IS-H
600
34
SAPK-60034INISH
SAP Healthcare
IS-M
600
23
SAPK-60023INISM
SAP MEDIA
IS-OIL
600
23
SAPK-60023INISOIL
IS-OIL
IS-PS-CA
600
23
SAPK-60023INISPSCA
IS-PUBLIC SECTOR CONTRACT ACCOUNTING
IS-UT
600
23
SAPK-60023INISUT
SAP Utilities/Telecommunication
LSOFE
600
24
SAPK-60024INLSOFE
SAP Learning Solution Front-End
SEM-BW
600
24
SAPKGS6024
SEM-BW: Strategic Enterprise Management
GBAPP002
600
4
SAPK-60004INGBAPP002
GBAPP002
GBHCM002
600
11
SAPK-60011INGBHCM002
HCM Employee Requests (Leave)
GBHCM003
600
9
SAPK-60009INGBHCM003
HCM Manager Approvals (Time, Training, L
SRA002
600
3
SAPK-60003INSRA002
Time Recording OData Integration Compone
SRA010
600
3
SAPK-60003INSRA010
Staffing List OData Integration Componen
SRA017
600
3
SAPK-60003INSRA017
Create Purchase Order OData Integration
SRA018
600
3
SAPK-60003INSRA018
Purchase Order Status Tracking OData Int
UIAPP001
100
4
SAPK-10004INUIAPP001
UIAPP001 100: Add-On Installation
UIAPP002
100
3
SAPK-10003INUIAPP002
UIAPP002 100: Add-On Installation
UIGIB001
100
4
SAPK-10004INUIGIB001
UIGIB001 100: Add-On Installation
UIHCM002
100
4
SAPK-10004INUIHCM002
UIHCM002 100: Add-On Installation
UIHCM003
100
4
SAPK-10004INUIHCM003
UIHCM003 100: Add-On Installation
UISRA002
100
3
SAPK-10003INUISRA002
HTML5 Time Recording
UISRA010
100
3
SAPK-10003INUISRA010
HTML5 Staffing List
UISRA017
100
3
SAPK-10003INUISRA017
HTML5 Create Order
UISRA018
100
3
SAPK-10003INUISRA018
HTML5 Order Status Tracking
please help me to resolve that issue
Regards
Pankaj Kamble

Hi Team,
i have created new post.
SAP Fiori getting error message Check the URL parameters and the scenario definition. To check the scenario definition.
Scenario definition configuration screen short.
2) Also getting bellow error message
Property TaskDefinitionID not found in type WorkflowTask
Did not find error details
{"error":{"code":"005056A509B11EE1B9A8FEA8DE87F78E","message":{"lang":"en","value":"Property TaskDefinitionID not found in type WorkflowTask"},"innererror":{"transactionid":"E6A9CEE388D3F1EC940400155DC8D41B","timestamp":"20140428075136.7780000","Error_Resolution":{"SAP_Transaction":"Run transaction /IWFND/ERROR_LOG on SAP NW Gateway hub system and search for entries with the timestamp above for more details","SAP_Note":"See SAP Note 1797736 for error analysis (https://service.sap.com/sap/support/notes/1797736)"}}}}
Regards
Pankaj Kamble

Problem in creating new implementation for filter dependent badi

Hi Experts,
I want to use badi NOTIF_EVENT_POST.It is a filter dependent badi. It is asking filter type while implementing thro se19. Could anyone pls tel me how to create new implementation for the filter dependent badi. Existing filter type is QMART. is there any problem if i change the filter type?
Thanks in Advance!

Hi ,
NOTIF_EVENT_POST is filter dependent and filter values are based on QMART value in table TQ80. You need to specify the filter value ie : QMART value before implimentation , before that check all active implimentations for the same , if u have to impliment on same filter value , you need to deactivate the one which is implimented on same filter value .
You are not supposed to change the filter type.
Regards,
Vamsi
Edited by: CH. VAMSHI on Sep 29, 2009 11:58 AM

Problem in creating new versions for existing DIR using CV01N

I am working in SAP ERP 6.0 EHP 4.0 system.
I have problem in creating new versions for existing DIR using CV01N
I create a DIR version 00 with functional location and mpd cycles. Then when i try to create a new version by copying the contents created from already created document.I change the MPD cycles in the new version and save it.
once when i display the first document created the mpdcycle specified in version 01 is copied to the 00 version.
The document is inconsistent where versioning of document doesnot work properly wrt MPDCYCLE and MP HEADER.
The problem which i found was the document identification guid remains the same for all the document versions getting created.
The same is working fine in SAP ERP6.0 EHP3.0 sytem.
Please someone help me in resolving the above issue.
Regards,
Prasad.B

There is a change in the standard code.The reason for the above problem was because of a missing Enhancemnet point in a standard function module 'CV110_DOC_CREATE_WITH_TEMPLATE'.
IS-ADEC-MPD - Enhancement to copy MPD data
ENHANCEMENT-POINT CV110_DOC_CREATE_WTEMPL_01 SPOTS ES_SAPLCV110.
+*$*$-Start: CV110_DOC_CREATE_WTEMPL_01----------------------------------------------------------$*$*+
+**ENHANCEMENT 1 ZSF_AD_MPD_SAPLCV110.    "active version**+
+*** copy MPD relevant data from templ. doc to current doc**+
+**CALL FUNCTION 'MPD02_COPY_MPD_DATA'**+
    +**EXPORTING**+
      +**is_draw = ls_draw**+
    +**TABLES**+
      +**ct_drad = lt_drad.**+
+*ENDENHANCEMENT.**$*$-End:   CV110_DOC_CREATE_WTEMPL_01----------------------------------------------------------$*$*+
Created a custom enhancement point similar to SAP ECC6.0 EHP 3.0 system.
The reason was the buffer was not getting cleared previously.After inserting the above code the DIR's are getting created withot any issues.
Regards,
Prasad.B

HOW TO SEARCH FOR USER EXITV50R0002 IN VL01(delivery)

HI ALL,
Can any one of you pls tell me the navigation of how to get the user exit in the screen of vl01 or 03 (outbound delivery).
But tis is not a customer exit which can be found by " call customer function".

Hi
First search the delivery main program SAPMV50A in that you will find the following User exits
include mv50afzz.
 include mv50afz1.
 include mv50afz2.
 include mv50afz3. "Userexit neu zu Release 3.0A
 include mv50afzk. "Userexit 4.6A (KOMKG/KOMPG)
 include mv50afzl. "Userexit 4.6A Liefergruppen
 "n_693000
 include mv50afzp. "Userexit for pricing screen input
You can write your code in the relavent above exit and see
other user exits related to this Delivery transaction are:
Enhancement
VMDE0004 Shipping Interface: Message SDPACK (Packing, Inbound)
VMDE0003 Shipping Interface: Message SDPICK (Picking, Inbound)
VMDE0002 Shipping Interface: Message PICKSD (Picking, Outbound)
VMDE0001 Shipping Interface: Error Handling - Inbound IDoc
V53W0001 User exits for creating picking waves
V53C0002 W&S: RWE enhancement - shipping material type/time slot
V53C0001 Rough workload calculation in time per item
V50S0001 User Exits for Delivery Processing
V50R0004 Calculation of Stock for POs for Shipping Due Date List
V50R0002 Collective processing for delivery creation
V50R0001 Collective processing for delivery creation
V50Q0001 Delivery Monitor: User Exits for Filling Display Fields
V50PSTAT Delivery: Item Status Calculation
V02V0004 User Exit for Staging Area Determination (Item)
V02V0003 User exit for gate + matl staging area determination (headr)
V02V0002 User exit for storage location determination
V02V0001 Sales area determination for stock transport order
Business Add-in
DELIVERY_ADDR_SAP Address Change in Delivery Processing
DELIVERY_PUBLISH Announcement of delivery data during database update
See the doc on User exits:
User exits (Function module exits) are exits developed by SAP. The exit is implementerd as a call to a function module. The code for the function module is written by the developer. You are not writing the code directly in the function module, but in the include that is implemented in the function module.
The naming standard of function modules for functionmodule exits is:
EXIT_<program name><3 digit suffix>
The call to a functionmodule exit is implemented as:
CALL CUSTOMER.-FUNCTION <3 digit suffix>
To find a Exit.
Goto Transaction -- Find The Package
SMOD >f4>Use the Package here to Find the Exits In the Package.
Else if you Want to search by Application Area wise ,
There is one more tab to find the Exits in the Respective Application Area.
Implementing the Exit-- CMOD Create ProjectsAssgn your Component .
Now Run ur Transaction to Check if it Triggers.
Thats it..
Suppose you need to find out all the user exits related to a tcode.
1. Execute the Tcode.
2. Open the SAP program.
3. Get the Development Class.
4. Execute Tcode SE84.
5. Open the Node 'Envir. -> Exit Techniques -> 'Customer Exits -> Enhancements'
6. Enter the Development class and execute.
Check out this thread..
The specified item was not found.
1. Type the transaction : system->status-> <PROG. NAME>
2 open SE37 , type EXIT<PROG NAME> and press F4 to get the list of function exits available.
3. Open CMOD utilities->SAP enhancements
EDIT->All selections
4.type the function module name obtained in step 2, in fields 'component name' in 'additional selections' block. and execute.
5. The displayed list contains the enhancements names for the transaction You were looking for.
6. Create a project in CMOD and the code in default include->activate.
http://www.erpgenie.com/sap/abap/code/abap26.htm
which gives the list of exits for a tcode
http://help.sap.com/saphelp_nw04/helpdata/en/bf/ec079f5db911d295ae0000e82de14a/frameset.htm
For information on Exits, check these links
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
http://www.planetsap.com/userexit_main_page.htm
User-Exits
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/ab038.htm
http://www.planetsap.com/userexit_main_page.htm
http://www.sap-basis-abap.com/sapab013.htm
http://sap.ittoolbox.com/documents/popular-q-and-a/user-exits-for-the-transaction-code-migo-3283
These links will help you to learn more on user exits.
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/frameset.htm
http://www.planetsap.com/userexit_main_page.htm
http://www.allsaplinks.com/user_exit.html
www.sap-img.com/abap/what-is-user-exits.htm
Also please check these threads for more details about user exits.
Re: Screen exit
user exit and customer exit
user exit
1. Document on UserExits in FI/CO
http://www.ficoexpertonline.com/downloads/User%20ExitsWPedit.doc
2. Finding User Exits...
http://sap.ionelburlacu.ro/abap/sap2/Other_Useful_Tips.html#Finding_User_Exits
3. List of all User Exits...
http://www.planetsap.com/userexit_main_page.htm
Reward points for useful Answers
Regards
Anji

WM implemention- for Existing HUM , Fin.Goods Delivery - Textiles Industy.

Similar Messages

Maybe you are looking for