WM interface to external system_IDOC not received

I have a question here about configuring WM interface to external system via t-code OMKY, and hope you can help:
What's the naming rule when define Logical System, RFC destination, Port and Partner Profile? Should all be defined under one name? In my test, if I only define logical system and partner profile under same name (for example "ABC"), and maintain Port and RFC destination under another name say "XYZ", then I can only sent IDOC but I can't receive the IDOC sent from external system (for example, confirmation of transfer order).
Can anybody shed some light on this question? Your input is highly appreciated.

Hi,
Why should the port and RFC destination also use same name as logical system and partner profile? Would you please kindly show me the rule? I’ve checked online help and searched extensively on websites without any clear instruction.
In my experinces, usually I setup using the names and make easy for other developer to identfy the interface problems in production as well as for enhancement in the future. Just imagine if you are dealing with hundred interfaces (inbound and outbound) and you have different names for same interface.
Again, you could setup with different names for logical system, RFC and so on.
In case of different name between logical system and port, would you please tell me why we can’t receive IDOC sent back by external system? Can’t they find the correct partner and port then send IDOC anymore?
Well ... you need to tell the external system what names to use for partner profile and port as part of EDIDC data.
Regards,
Ferry Lianto

Similar Messages

  • External emails not received after shutdown of Exchange 2010 in coexistence with Exchange 2013

    I have exchange 2013 and exchange 2010 in coexistence mode. All mailboxes have been moved to Exchange 2013 and firewall/spamfilters already pointed to Exchange 2013 CAS server. I can receive/send from and to external addresses, however when I shutted down
    the Exchange 2010 all incoming external mails were not received. What could be the cause?

    Start by re-checking how the device that takes the traffic from the external MX IP to internal is configured.
    Sniff the traffic to ensure that it is hitting 2013 directly.
    Cheers,
    Rhoderick
    Microsoft Senior Exchange PFE
    Blog:
    http://blogs.technet.com/rmilne 
    Twitter:   LinkedIn:
      Facebook:
      XING:
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

  • External monitor not receiving signal

    In a MacBook Pro with Mountain Lion 10.8.3 when connecting to an external monitor does not appeare to be receiving signal.

    Apple support article:
    Video Troubleshooting Internal and External Monitors

  • External modem not receiving faxes

    I have an Apple external modem plugged into the USB port on my partner's iMac 24" 2.16 GHz Intel Core 2 Duo, running OS X 10.5.6.
    I cannot get it to answer the fax line and pick up faxes. In the Network system panel External Modem shows as Not Connected. When I click "advanced" the system seems to recognize the fact that an Apple modem is hooked up.
    Any idea how to get this to work?

    Hi Keith, that sounds like a munged plist/pref, but since I don't have one of those Modems to find the right one I may not be of much help, but the ones that may affect I think would be these...
    /Library/Preferences/SystemConfiguration/NetworkInterfaces.plist
    /Library/Preferences/SystemConfiguration/SystemConfiguration/
    Another thing to try is dragging these whole folders to the Desktop, then reboot..
    /Users/nnnn/Library/Preferences
    /Library/Preferences/SystemConfiguration/SystemConfiguration
    Look for files like this also...
    /Users/YourUserName/Library/ByHost/com.apple.PrefPane.Network.<12digitHexNumber> .plist
    Or...
    /Users/YourUserName/Library/Preferences/ByHost/com.apple.networkConnect.<12digit HexNumber>.plist

  • Have an iphone 3GS, 2 email accounts.  My work email account used to work.  Now if I send any emails from this account it only appears in my sent box.  Recipients internal and external do not receive.  IT person cannot figure why occurring.  Any insight?

    Have a iphone 3GS; 2 email accounts.  one is for work.  It used to work fine until about Feb 2011.  Now when i send emails from my work account it only appears in the sent file.  Recipients do not get email.
    IT person looked at it & cannot find why this is happening.
    Any insight why this is occurring??

    This has nothing to do with your iPhone.
    If a message is in the account's Sent mailbox, this means the message was successfully sent. If a message cannot be sent for whatever reason, it will remain in the Outbox.
    What happens to a message after it was successfully sent has nothing to do with the email client or computer/device used to send the message.

  • Calendar Server user can not receive external invites

    Hi,
    We have a MacPro running ML Server 10.8.5 with 10 user accounts using the calendar and file server services.
    Calendar server is where the issue is. We have 10 + users that are set up to send and receive external invites in calendar server without a problem. Recently, one of the user accounts stopped receiving external invites. The problem began not long after I set up a second account for the same user for their shared calendars (they requested this so all shared cals were not on their iOS devices). Although I used a separate email, it was an alias of the first so may have caused a conflict / problem (?). I got rid of the second account with no change to the first. 
    The account still receives invites from the other internal user accounts and the other services such as file sharing are unaffected. There are no other problems with the functionality of that user, in calendar or otherwise.
    I have tried changing the email associated with that user account and setting up a new test user account (in Server). The email invite will still not come through.
    I have changed it back to the way it was originally.
    Summary
    One of 10 user accounts does not receive external invites
    Was working until recently
    The account can send invites to external addresses
    Same email address will not work even when associated with a different account
    I have included a large section of the calendar error log from the part that references the email address (in red) attached to the user account in question. Apologies, I am not familiar with deciphering this information. That is why I've come here.
    Any help would be very much appreciated. Thanks.
    Error Log Info
    2013-10-01 15:50:43+1000 [-] [caldav-1]  [PooledMemCacheProtocol,client] [twistedcaldav.cache.MemcacheResponseCache#debug] Adding to cache: '21a0cc58845276ae69a523c52cc9d642' = '((I0\\nNtp1\\nI6863881604889304901\\n(I0\\nNtp2\\n(dp3\\n(I207\\n(dp4\\nS\\'DA V\\'\\np5\\n(lp6\\nS\\'1, access-control, calendar-access, calendar-schedule, calendar-auto-schedule, calendar-availability, inbox-availability, calendar-proxy, calendarserver-private-events, calendarserver-private-comments, calendarserver-sharing, calendarserver-sharing-no-scheduling, calendar-query-extended, calendar-default-alarms, addressbook, extended-mkcol, calendarserver-principal-property-search, calendarserver-principal-search\\'\\np7\\nasS\\'Content-Type\\'\\np8\\n(lp9\\nS \\'text/xml\\'\\np10\\nasS"<?xml version=\\'1.0\\' encoding=\\'UTF-8\\'?>\\\\n<multistatus xmlns=\\'DAV:\\'>\\\\r\\\\n  <response>\\\\r\\\\n    <href>/principals/__uids__/E47FA586-0340-45AF-8DDB-70F0B77E5A06/</href>\\\\r\\\ \n    <propstat>\\\\r\\\\n      <prop>\\\\r\\\\n        <calendar-user-address-set xmlns=\\'urn:ietf:params:xml:ns:caldav\\'>\\\\r\\\\n          <href xmlns=\\ (truncated, continued)
    2013-10-01 15:50:43+1000 [-] [caldav-1] 'DAV:\\'>/principals/__uids__/E47FA586-0340-45AF-8DDB-70F0B77E5A06/</href>\\\\r \\\\n          <href xmlns=\\'DAV:\\'>/principals/users/ashtonbishop/</href>\\\\r\\\\n          <href xmlns=\\'DAV:\\'>mailto:[email protected]</href>\\\\r\\\\n          <href xmlns=\\'DAV:\\'>urn:uuid:E47FA586-0340-45AF-8DDB-70F0B77E5A06</href>\\\\r\\\\n         </calendar-user-address-set>\\\\r\\\\n        <displayname>Ashton Bishop</displayname>\\\\r\\\\n        <email-address-set xmlns=\\'http://calendarserver.org/ns/\\'>\\\\r\\\\n          <email-address>[email protected]</email-address>\\\\r\\\\n        </email-address-set>\\\\r\\\\n      </prop>\\\\r\\\\n      <status>HTTP/1.1 200 OK</status>\\\\r\\\\n    </propstat>\\\\r\\\\n  </response>\\\\r\\\\n</multistatus>"\\np11\\ntt.'
    2013-10-01 15:50:43+1000 [-] [caldav-1]  [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Busied client: <twistedcaldav.memcachepool.PooledMemCacheProtocol instance at 0x10a50e200>
    2013-10-01 15:50:43+1000 [-] [caldav-1]  [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Clients #free: 4, #busy: 1, #pending: 0, #queued: 0
    2013-10-01 15:50:43+1000 [-] [caldav-1]  [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Freed client: <twistedcaldav.memcachepool.PooledMemCacheProtocol instance at 0x10a50e200>
    2013-10-01 15:50:43+1000 [-] [caldav-1]  [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Clients #free: 5, #busy: 0, #pending: 0, #queued: 0
    2013-10-01 15:50:43+1000 [-] [caldav-1]  [HTTPChannel,31943,192.168.15.1] [twext.web2.server#info] PROPFIND /calendars/__uids__/AE518560-2AD4-49AC-8DA6-05CCB82C4D7C/719e7bd2-73b9-485b-b1c 8-83ad63011a05/ HTTP/1.1
    2013-10-01 15:50:43+1000 [-] [caldav-1]  [HTTPChannel,31943,192.168.15.1] [twistedcaldav.directory.digest.DigestCredentialsMemcache#debug] Getting Cache Token for '178760298581319517811431231781551239741271129174943556363'
    2013-10-01 15:50:43+1000 [-] [caldav-1]  [HTTPChannel,31943,192.168.15.1] [twistedcaldav.memcachepool.MemCachePool#debug] Busied client: <twistedcaldav.memcachepool.PooledMemCacheProtocol instance at 0x10a50e200>
    2013-10-01 15:50:43+1000 [-] [caldav-1]  [HTTPChannel,31943,192.168.15.1] [twistedcaldav.memcachepool.MemCachePool#debug] Clients #free: 4, #busy: 1, #pending: 0, #queued: 0
    2013-10-01 15:50:43+1000 [-] [caldav-1]  [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Freed client: <twistedcaldav.memcachepool.PooledMemCacheProtocol instance at 0x10a50e200>
    2013-10-01 15:50:43+1000 [-] [caldav-1]  [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Clients #free: 5, #busy: 0, #pending: 0, #queued: 0
    2013-10-01 15:50:43+1000 [-] [caldav-1]  [PooledMemCacheProtocol,client] [calendarserver.platform.darwin.od.opendirectory#debug] Checking digest auth for user 'intern2' (tries remaining: 3)
    2013-10-01 15:50:43+1000 [-] [caldav-1]  [PooledMemCacheProtocol,client] [calendarserver.platform.darwin.od.opendirectory#debug] Digest auth for user 'intern2' result: True
    2013-10-01 15:50:43+1000 [-] [caldav-1]  [-] [twistedcaldav.cache.MemcacheResponseCache#debug] hashing key for get: ('PROPFIND', '/principals/__uids__/AE518560-2AD4-49AC-8DA6-05CCB82C4D7C/', '/calendars/__uids__/AE518560-2AD4-49AC-8DA6-05CCB82C4D7C/719e7bd2-73b9-485b-b1 c8-83ad63011a05/', '0', -6078480706465304126) to '97c1466c67a97bfc6d06eb3e3f7a3153'
    2013-10-01 15:50:43+1000 [-] [caldav-1]  [-] [twistedcaldav.cache.MemcacheResponseCache#debug] Checking cache for: '97c1466c67a97bfc6d06eb3e3f7a3153'
    2013-10-01 15:50:43+1000 [-] [caldav-1]  [-] [twistedcaldav.memcachepool.MemCachePool#debug] Busied client: <twistedcaldav.memcachepool.PooledMemCacheProtocol instance at 0x10a50e200>
    2013-10-01 15:50:43+1000 [-] [caldav-1]  [-] [twistedcaldav.memcachepool.MemCachePool#debug] Clients #free: 4, #busy: 1, #pending: 0, #queued: 0
    2013-10-01 15:50:43+1000 [-] [caldav-1]  [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Freed client: <twistedcaldav.memcachepool.PooledMemCacheProtocol instance at 0x10a50e200>
    2013-10-01 15:50:43+1000 [-] [caldav-1]  [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Clients #free: 5, #busy: 0, #pending: 0, #queued: 0
    2013-10-01 15:50:43+1000 [-] [caldav-1]  [PooledMemCacheProtocol,client] [twistedcaldav.cache.MemcacheResponseCache#debug] Not in cache: '97c1466c67a97bfc6d06eb3e3f7a3153'
    2013-10-01 15:50:43+1000 [-] [caldav-1]  [PooledMemCacheProtocol,client] [twistedcaldav.memcacher.Memcacher#debug] Getting Cache Token for 'AE518560-2AD4-49AC-8DA6-05CCB82C4D7C'
    2013-10-01 15:50:43+1000 [-] [caldav-1]  [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Busied client: <twistedcaldav.memcachepool.PooledMemCacheProtocol instance at 0x10a50e200>
    2013-10-01 15:50:43+1000 [-] [caldav-1]  [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Clients #free: 4, #busy: 1, #pending: 0, #queued: 0
    2013-10-01 15:50:43+1000 [-] [caldav-1]  [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Freed client: <twistedcaldav.memcachepool.PooledMemCacheProtocol instance at 0x10a50e200>
    2013-10-01 15:50:43+1000 [-] [caldav-1]  [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Clients #free: 5, #busy: 0, #pending: 0, #queued: 0
    2013-10-01 15:50:43+1000 [-] [caldav-1]  [PooledMemCacheProtocol,client] [txdav.base.datastore.util.QueryCacher#debug] Getting Cache Token for 'homeMetaData:6262'
    2013-10-01 15:50:43+1000 [-] [caldav-1]  [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Busied client: <twistedcaldav.memcachepool.PooledMemCacheProtocol instance at 0x10a50e200>
    2013-10-01 15:50:43+1000 [-] [caldav-1]  [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Clients #free: 4, #busy: 1, #pending: 0, #queued: 0
    2013-10-01 15:50:43+1000 [-] [caldav-1]  [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Freed client: <twistedcaldav.memcachepool.PooledMemCacheProtocol instance at 0x10a50e200>
    2013-10-01 15:50:43+1000 [-] [caldav-1]  [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Clients #free: 5, #busy: 0, #pending: 0, #queued: 0
    2013-10-01 15:50:43+1000 [-] [caldav-1]  [PooledMemCacheProtocol,client] [twistedcaldav.memcacher.Memcacher#debug] Getting Cache Token for '6262'
    2013-10-01 15:50:43+1000 [-] [caldav-1]  [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Busied client: <twistedcaldav.memcachepool.PooledMemCacheProtocol instance at 0x10a50e200>
    2013-10-01 15:50:43+1000 [-] [caldav-1]  [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Clients #free: 4, #busy: 1, #pending: 0, #queued: 0
    2013-10-01 15:50:43+1000 [-] [caldav-1]  [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Freed client: <twistedcaldav.memcachepool.PooledMemCacheProtocol instance at 0x10a50e200>
    2013-10-01 15:50:43+1000 [-] [caldav-1]  [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Clients #free: 5, #busy: 0, #pending: 0, #queued: 0
    2013-10-01 15:50:43+1000 [-] [caldav-1]  [PooledMemCacheProtocol,client] [txdav.base.datastore.util.QueryCacher#debug] Getting Cache Token for 'objectWithName:6262:719e7bd2-73b9-485b-b1c8-83ad63011a05'
    2013-10-01 15:50:43+1000 [-] [caldav-1]  [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Busied client: <twistedcaldav.memcachepool.PooledMemCacheProtocol instance at 0x10a50e200>
    2013-10-01 15:50:43+1000 [-] [caldav-1]  [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Clients #free: 4, #busy: 1, #pending: 0, #queued: 0
    2013-10-01 15:50:43+1000 [-] [caldav-1]  [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Freed client: <twistedcaldav.memcachepool.PooledMemCacheProtocol instance at 0x10a50e200>
    2013-10-01 15:50:43+1000 [-] [caldav-1]  [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Clients #free: 5, #busy: 0, #pending: 0, #queued: 0
    2013-10-01 15:50:43+1000 [-] [caldav-1]  [-] [twistedcaldav.memcacher.Memcacher#debug] Getting Cache Token for 'E47FA586-0340-45AF-8DDB-70F0B77E5A06'
    2013-10-01 15:50:43+1000 [-] [caldav-1]  [-] [twistedcaldav.memcachepool.MemCachePool#debug] Busied client: <twistedcaldav.memcachepool.PooledMemCacheProtocol instance at 0x10a50e200>
    2013-10-01 15:50:43+1000 [-] [caldav-1]  [-] [twistedcaldav.memcachepool.MemCachePool#debug] Clients #free: 4, #busy: 1, #pending: 0, #queued: 0
    2013-10-01 15:50:43+1000 [-] [caldav-1]  [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Freed client: <twistedcaldav.memcachepool.PooledMemCacheProtocol instance at 0x10a50e200>
    2013-10-01 15:50:43+1000 [-] [caldav-1]  [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Clients #free: 5, #busy: 0, #pending: 0, #queued: 0
    2013-10-01 15:50:43+1000 [-] [caldav-1]  [PooledMemCacheProtocol,client] [txdav.base.datastore.util.QueryCacher#debug] Getting Cache Token for 'homeMetaData:6241'
    2013-10-01 15:50:43+1000 [-] [caldav-1]  [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Busied client: <twistedcaldav.memcachepool.PooledMemCacheProtocol instance at 0x10a50e200>
    2013-10-01 15:50:43+1000 [-] [caldav-1]  [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Clients #free: 4, #busy: 1, #pending: 0, #queued: 0
    2013-10-01 15:50:43+1000 [-] [caldav-1]  [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Freed client: <twistedcaldav.memcachepool.PooledMemCacheProtocol instance at 0x10a50e200>
    2013-10-01 15:50:43+1000 [-] [caldav-1]  [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Clients #free: 5, #busy: 0, #pending: 0, #queued: 0
    2013-10-01 15:50:43+1000 [-] [caldav-1]  [PooledMemCacheProtocol,client] [twistedcaldav.memcacher.Memcacher#debug] Getting Cache Token for '6241'
    2013-10-01 15:50:43+1000 [-] [caldav-1]  [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Busied client: <twistedcaldav.memcachepool.PooledMemCacheProtocol instance at 0x10a50e200>
    2013-10-01 15:50:43+1000 [-] [caldav-1]  [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Clients #free: 4, #busy: 1, #pending: 0, #queued: 0
    2013-10-01 15:50:43+1000 [-] [caldav-1]  [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Freed client: <twistedcaldav.memcachepool.PooledMemCacheProtocol instance at 0x10a50e200>
    2013-10-01 15:50:43+1000 [-] [caldav-1]  [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Clients #free: 5, #busy: 0, #pending: 0, #queued: 0
    2013-10-01 15:50:43+1000 [-] [caldav-1]  [PooledMemCacheProtocol,client] [txdav.base.datastore.util.QueryCacher#debug] Getting Cache Token for 'objectWithName:6241:calendar'
    2013-10-01 15:50:43+1000 [-] [caldav-1]  [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Busied client: <twistedcaldav.memcachepool.PooledMemCacheProtocol instance at 0x10a50e200>
    2013-10-01 15:50:43+1000 [-] [caldav-1]  [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Clients #free: 4, #busy: 1, #pending: 0, #queued: 0
    2013-10-01 15:50:43+1000 [-] [caldav-1]  [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Freed client: <twistedcaldav.memcachepool.PooledMemCacheProtocol instance at 0x10a50e200>
    2013-10-01 15:50:43+1000 [-] [caldav-1]  [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Clients #free: 5, #busy: 0, #pending: 0, #queued: 0
    2013-10-01 15:50:43+1000 [-] [caldav-1]  [PooledMemCacheProtocol,client] [txdav.base.datastore.util.QueryCacher#debug] Getting Cache Token for 'homeChildMetaData:6242'
    2013-10-01 15:50:43+1000 [-] [caldav-1]  [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Busied client: <twistedcaldav.memcachepool.PooledMemCacheProtocol instance at 0x10a50e200>
    2013-10-01 15:50:43+1000 [-] [caldav-1] 

    Thanks so much for your comment ~morgen.
    Sorry, I should have mentioned, that it what my first thought so I tested by ensuring the email address associated with the user account (not hosted on the server but by Google Apps) is recieving all other mail.
    I have also tried:
    - Setting all accounts (calendar, email and contact card with associated email address) in another local user on a defferent Mac. So it's not a local user or Mail app issue.
    - Sending invites from different Calendar apps and email accounts - iCloud, Gmail (both using Apple Calendar and the web interface).
    That's why I came back around to thinking it must be calendar server related. However is there is absolutly no conntact with the server with incoming email invites I must be looking in the wrong place (and the wrong forum - sorry!).
    Does anyone have any ideas where I should be focusing my efforts?
    Many thanks in advance.

  • Error: com.sap.engine.interfaces.messaging.api.exception.RetryControlException: Receiver Determination did not find any receivers at all

    Hello,
    I have an issue configuring a simple File Adapter Content Conversion, it will be great to give me some support as I'am new in the PO Environment.
    Iam reading a flat file and trying to write into an XML in the same FTP server
    I have a 1 to 1 Mapping as follows
    And my Content Conversion at Sender side Looks like this
    After running the configuration Iam getting following error message
    Error: com.sap.engine.interfaces.messaging.api.exception.RetryControlException: Receiver Determination did not find any receivers at all
    My System is the SAP Netweaver Process Intgration 7.4 single Java stack
    Do you have any idea how to fix this issue?
    Many thanks in advance
    Khadim

    Hi evrybody
    I have enabled the tracing of ICO and have seen that my payload for the message mapping is ok,.
    <ns:hartgeldbest_ERP_KT xmlns:ns="http://xxxxxx.de">
    <Recordset>      
    <header> 
         <gesellschaft>03</gesellschaft> 
         <filiale>000</filiale>
         <satzart>11</satzart>
         <datum>00000000</datum>
         <kennzeichen>1</kennzeichen>
    </header>
    </Recordset>
    </ns:hartgeldbest_ERP_KT>
    The issue is on detrmining the RECEIVER in the Main-XML
    <sap:Main xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:sap="http://sap.com/xi/XI/Message/30" versionMajor="3"versionMinor="1" SOAP:mustUnderstand="1">
    <sap:MessageClass>ApplicationMessage</sap:MessageClass> 
    <sap:ProcessingMode>asynchronous</sap:ProcessingMode>
    <sap:MessageId>ae41678e-da87-11e3-cd0f-0000006831a2</sap:MessageId>
    <sap:TimeSent>2014-05-13T10:16:43Z</sap:TimeSent>
    <sap:Sender> 
    <sap:Party agency="http://sap.com/xi/XI" scheme="XIParty"/> 
    <sap:Service>CC_Hartgeldbest_File2Idoc</sap:Service>
    </sap:Sender>
    <sap:Receiver> 
    <sap:Party agency="" scheme=""/> 
    <sap:Service/>
    </sap:Receiver>
    <sap:Interface namespace="http://xxxxx.de">hartgeldbest_KT_async_out</sap:Interface>
    </sap:Main>
    Is it possible that the receiver is overwritten due to the Content Conversion? Because if I set my Message Protocol to "File" the receiver determination will work.
    Any idea?
    Thx
    Khadim

  • I can not receive files via bluetooth from other external devices

    I can not receive files via bluetooth from other external devices nokia, samsung and other than apple. I can send files to them but not receive. What is the problem?

    I sucessfully transfered files from my Nexus4 to MBP via Bluetooth
    1. Go to system preference and select Sharing.
    2. Check the Bluetooth sharing.
    3. Specify directory to which you want to recieve files from Blue tooth device.
    4. Turn Blue tooth off and make it on.
    Your MBP is now ready to recieve files from Andoriod phone.

  • Delegates not receiving not receiving emails to approve/deny booking requests from external contacts.

    Hi,
    I have an issue with meeting room delegates no longer receiving email notifications when external contacts try to book meeting rooms. 
    Our business has may business units with their own domains and exchange servers, so we have a central exchange server (ex2013 CU2) hosting the shared meeting rooms, with the GAL populated by FIM, and using the MS Federated Gateway and Organisation Relationships
    to share calendars.
    We have a couple of meeting rooms which need delegate approval to book, and if a person hosted on the central exchange tried to book a meeting the delegates receive an email as expected, but when someone from one of the other business units tries the meeting
    shows up as tentative, but the delegates do not receive an email.
    This was working last year, and I havent been able to pin down when it stopped, but it is possible it stopped when applying Exchange 2013 CU2.
    Where can I start to trouble shoot this issue?
    Cheers.

    Hi James
    First run below command to check if ProcessExternalMeetingMessages value is set to true
    Get-CalendarProcessing -Identity [email protected] | Format-List
    If its not set to true then run the below command to set it  to true 
    set-calendarprocessing "Room 1" -AutomateProcessing AutoUpdate -ProcessExternalMeetingMessages $true
    Below threads for your reference
    http://social.technet.microsoft.com/Forums/exchange/en-US/e8417d42-417a-41f7-858f-45e8bd69fc32/how-can-i-set-processexternalmeetingmessages-true-as-a-default-for-new-mailboxes
    http://msexchangeguru.com/2011/06/08/meeting-response/
    Please mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me  and others to take time out to help you.
    Regards, 
    Sathish
    Sathish

  • I can not receive email through the webmail interface

    This started today. I am able to send from my verizon account to my netzero, but do not receive anything when I send from netzero to verizon. There are no error messages. I am using IE 9 (Win 7) and also tried with firefox. Is anyone else having issues in S/E Pennsylvania (Swarthmore)? Thanks, Jose
    I also use zoho to manipulate my VZ mail (I leave a copy on the server) and the issue persists there, Zoho support could not find any issues on their end
    If a forum member gives an answer you like, please give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem. Thanks !!!
    http://forums.verizon.com/t5/Verizon-net-Email/Fix-for-Missing-Inbox-sent-folders-etc-with-Internet-Explorer-11/m-p/647399
    Solved!
    Go to Solution.

    I have a very long blocked senders list and I added netzero to the list by mistake. (HUGE FACEPALM)
    If a forum member gives an answer you like, please give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem. Thanks !!!
    http://forums.verizon.com/t5/Verizon-net-Email/Fix-for-Missing-Inbox-sent-folders-etc-with-Internet-Explorer-11/m-p/647399

  • ICal invites are not received by some people (I know why, but Apple won't fix it)

    I switched to icloud a while back and have the maddening problem of SOME people not receiving invites, and have discovered what causes it (at least in my case):
    If the user you are sending to has an itunes (or apple id) account with that email as the login (and that email is NOT an icloud email) they will never receive the iCal invite! Instead it gets routed to their (non setup) icloud account. If they start using icloud for their calendars with this same external email address as login, they will receive them there (directly on their calendar if it is setup). Apple refuses to forward it to their real email address, the one we are sending it to. I have reported it to Apple several times but they are not inclined to fix it, probably because they want to force external users to use icloud. This is mega frustrating. Many of my friends do not receive invites, forcing me to use Google calendar for events with those friends. I prefer the general interface and look of icloud/ical invites, but I need to be able to actually invite people!

    ssuess wrote:
    Not for me, but let me verify the following type scenario with you:
    1. Your person to invite has a gmail address ([email protected])
    2. That gmail address is their Apple ID/iTunes login name (this is the most important piece)
    3. They may have some icloud service on (like note syncing) but do not use icloud calendaring or mail (or may have signed up for mail but never check it)
    4. Your icloud/ical invite arrives properly in their gmail inbox (at [email protected])?
    Is all the above true? For me, the above scenario results in no email being received at the address I sent it to (number 4), it gets routed/lost in icloud if that is their Apple ID login.
    Like I said, I do not have the issue you have, all my invites are received regardless of the email provider and user ID's I just send to the correct address and that's it. Frankly if what you said was common the service would be useless, but it works for millions. The problem is at your end, not everybody's.
    The login name is just a text string to iCloud, not an address.

  • XML Monitor: no interface action for sender or receiver found

    Hi,
    I am new to XI and currently working on Supplier Network Collaboration ( SNC) to Integrate PO's from ECC to SCM system via XI. I have successfully triggered PORDCR1 message for which I was able to see the XML message in XI. The message is stuck on the Inbound of SCM system ( seen in SMQ2 with error message "Internal error, calling address update without address ID Message no. SR053).
    When i double click on Inbound queue (SMQ2) in SCM system it takes me to SXI_Monitor
    Below is the log from bottom screen for Trace. Can you please check and see if you could help to resolve the issue?
    Thanks,
    Tejinder
    Below is the Trace bottom screen details
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--
    Inbound Message
    -->
    - <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30"> 
    <Trace level="1" type="T">http content length 7569</Trace> 
    <Trace level="1" type="B" name="CL_XMS_HTTP_HANDLER-HANDLE_REQUEST" /> 
    - <!-- ************************************
    -->  
    <Trace level="1" type="T">XMB was called with URL /sap/xi/engine?type=entry</Trace> 
    <Trace level="1" type="T">Process ID: 27633</Trace> 
    <Trace level="1" type="T">Work Process ID: 0</Trace> 
    <Trace level="1" type="T">COMMIT is done by XMB !</Trace> 
    <Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" /> 
    - <!-- ************************************
    -->  
    <Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" /> 
    - <!-- ************************************
    -->  
    <Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" /> 
    <Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV" /> 
    <Trace level="1" type="T">****************************************************</Trace> 
    <Trace level="1" type="T">* *</Trace> 
    <Trace level="1" type="T">* *</Trace> 
    <Trace level="1" type="T">XMB entry processing</Trace> 
    <Trace level="1" type="T">system-ID = AM2</Trace> 
    <Trace level="1" type="T">client = 001</Trace> 
    <Trace level="1" type="T">language = E</Trace> 
    <Trace level="1" type="T">user = ALE_SNC</Trace> 
    <Trace level="1" type="Timestamp">2014-09-10T15:06:15Z CST</Trace> 
    <Trace level="1" type="T">* *</Trace> 
    <Trace level="1" type="T">* *</Trace> 
    <Trace level="1" type="T">****************************************************</Trace> 
    <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" /> 
    - <!-- ************************************
    -->  
    <Trace level="1" type="T">Message-GUID = 005056B61D0E1ED48E9F7E70255B98CE</Trace> 
    <Trace level="1" type="T">PLNAME = RECEIVER</Trace> 
    <Trace level="1" type="T">QOS = EO</Trace> 
    <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" /> 
    - <!-- ************************************
    -->  
    <Trace level="1" type="T">Get definition of external pipeline = RECEIVER</Trace> 
    <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" /> 
    <Trace level="1" type="T">Get definition of internal pipeline = SAP_RECEIVER</Trace> 
    <Trace level="1" type="T">Queue name : XBTR0005</Trace> 
    <Trace level="1" type="T">Generated prefixed queue name = XBTR0005</Trace> 
    <Trace level="1" type="T">Schedule message in qRFC environment</Trace> 
    <Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace> 
    <Trace level="1" type="T">-----------------------------------------------------</Trace> 
    <Trace level="1" type="T">Going to persist message</Trace> 
    <Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace> 
    <Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace> 
    <Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace> 
    <Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace> 
    <Trace level="1" type="T">-----------------------------------------------------</Trace> 
    <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" /> 
    - <!-- ************************************
    -->  
    <Trace level="1" type="T">--start determination of sender interface action</Trace> 
    <Trace level="1" type="T">select interface</Trace> 
    <Trace level="1" type="T">select interface namespace</Trace> 
    <Trace level="1" type="T">--start determination of receiver interface action</Trace> 
    <Trace level="1" type="T">Loop 0000000001</Trace> 
    <Trace level="1" type="T">select interface ReplenishmentOrderNotification_In</Trace> 
    <Trace level="1" type="T">select interface namespace http://sap.com/xi/SNC/Global</Trace> 
    <Trace level="1" type="T">--no interface action for sender or receiver found</Trace> 
    <Trace level="1" type="T">Hence set action to DEL</Trace> 
    </SAP:Trace>

    Hi Tejinder
    Check this link
    NO INTERFACE ACTION FOR SENDER OR RECEIVER FOUND
    SXMB_MONI: no interface action for sender or receiver found
    Error: no interface action for sender or receiver found
    no interface action for sender or receiver found - SMQ2 SYSFAIL
    Regards
    Osman
    Message was edited by: Osman Jabri

  • Error: no interface action for sender or receiver found

    Hello,
    I have configured a asynchronous RFC to JDBC scenario.
    When i try to execute the end to end scenario , the message in SXMB_MONI is with a green flag(scheduled)  and queue status is yellow and when i double the message , the trace shows following message:
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Inbound Message
      -->
    - <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
      <Trace level="1" type="B" name="CL_XMS_HTTP_HANDLER-HANDLE_REQUEST" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">XMB was called with URL /sap/xi/engine?type=entry</Trace>
      <Trace level="1" type="T">Work Process ID: 25711</Trace>
      <Trace level="1" type="T">COMMIT is done by XMB !</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
    - <!--  ************************************
      -->
      <Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
    - <!--  ************************************
      -->
      <Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
      <Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV" />
      <Trace level="1" type="T">****************************************************</Trace>
      <Trace level="1" type="T">* *</Trace>
      <Trace level="1" type="T">* *</Trace>
      <Trace level="1" type="T">XMB entry processing</Trace>
      <Trace level="1" type="T">system-ID = HXD</Trace>
      <Trace level="1" type="T">client = 001</Trace>
      <Trace level="1" type="T">language = E</Trace>
      <Trace level="1" type="T">user = PIAFUSER</Trace>
      <Trace level="1" type="Timestamp">2010-05-24T12:23:09Z CET</Trace>
      <Trace level="1" type="T">* *</Trace>
      <Trace level="1" type="T">* *</Trace>
      <Trace level="1" type="T">****************************************************</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">Message-GUID = 3CA00D0C20460CD10B3CA18E3C804118</Trace>
      <Trace level="1" type="T">PLNAME = RECEIVER</Trace>
      <Trace level="1" type="T">QOS = EO</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">Get definition of external pipeline = RECEIVER</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
      <Trace level="1" type="T">Get definition of internal pipeline = SAP_RECEIVER</Trace>
      <Trace level="1" type="T">Queue name : XBTR0004</Trace>
      <Trace level="1" type="T">Generated prefixed queue name = XBTR0004</Trace>
      <Trace level="1" type="T">Schedule message in qRFC environment</Trace>
      <Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="T">Going to persist message</Trace>
      <Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
      <Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
      <Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
      <Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">--start determination of sender interface action</Trace>
      <Trace level="1" type="T">select interface</Trace>
      <Trace level="1" type="T">select interface namespace</Trace>
      <Trace level="1" type="T">--start determination of receiver interface action</Trace>
      <Trace level="1" type="T">Loop 0000000001</Trace>
      <Trace level="1" type="T">select interface Z_SD_HP_SALESORG</Trace>
      <Trace level="1" type="T">select interface namespace urn:sap-com:document:sap:rfc:functions</Trace>
      <Trace level="1" type="T">--no interface action for sender or receiver found</Trace>
      <Trace level="1" type="T">Hence set action to DEL</Trace>
      </SAP:Trace>
    The pipeline steps on the left hand side in sxmb_moni shows only inbound Message i.e remaining steps are not executed.
    When i try the execute message by directly sending message from Runtime Workbench , the scenario is executed successfully.
    Please help.
    Thanks & Regards,
    Loveena

    Hello,
    The problem was with the Client. Our Xi is running on Client 200 wheras at runtime it was picking up the default client 001.
    So after changing the default Client 001 to 200.
    The scenario was working fine.
    But from the third time onwards again it is taking the default Client and I am facing the issue.
    I guess it is some Cache problem. Can anybody tell me how to refresh the cache.
    Thanks ,
    Loveena

  • NO INTERFACE ACTION FOR SENDER OR RECEIVER FOUND

    Hi Masters of SRM
    Into SRM/SUS client received an message XML across XI the  SXMB_MONI  in trace section show the next message
    <!-- ************************************
    -->
    <Trace level="3" type="T">Persisting message Status = 003</Trace>
    <Trace level="3" type="T">Message version 002</Trace>
    <Trace level="3" type="T">Pipeline SENDER</Trace>
    <Trace level="1" type="T">--start determination of sender interface action</Trace>
    <Trace level="1" type="T">select interface PurchaseOrderRequest_Out</Trace>
    <Trace level="1" type="T">select interface namespace http://sap.com/xi/SRM/Procurement/Global</Trace>
    <Trace level="1" type="T">--start determination of receiver interface action</Trace>
    <Trace level="1" type="T">Loop 0000000001</Trace>
    <Trace level="1" type="T">select interface</Trace>
    <Trace level="1" type="T">select interface namespace</Trace>
    <Trace level="1" type="T">--*no interface action for sender or receiver found*</Trace>
    <Trace level="1" type="T">Hence set action to DEL</Trace>
    </SAP:Trace
    NO INTERFACE ACTION FOR SENDER OR RECEIVER FOUND
    what can I do ?
    thanks.

    Hi Nikhil .
    yes the Receiver Determination is Active.
    I can see other message into message in SUS  client these is the complete message.
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Response
      -->
    - <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
      <Trace level="1" type="T">Work Process ID: 884922</Trace>
      <Trace level="1" type="T">COMMIT is expected by application !</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
    - <!--  ************************************
      -->
      <Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
    - <!--  ************************************
      -->
      <Trace level="3" type="T">XMB was called with external pipeline PID = ENTRY</Trace>
      <Trace level="3" type="T">Getting type of XMB...</Trace>
      <Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
      <Trace level="2" type="T">XMB kind = SND_CENTR</Trace>
      <Trace level="3" type="T">Start pipeline found</Trace>
      <Trace level="2" type="T">Switch to external start pipeline PID = SENDER</Trace>
    - <Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV">
      <Trace level="3" type="T">No triggers found. OK.</Trace>
      </Trace>
      <Trace level="1" type="T">****************************************************</Trace>
      <Trace level="1" type="T">* *</Trace>
      <Trace level="1" type="T">* *</Trace>
      <Trace level="1" type="T">XMB entry processing</Trace>
      <Trace level="3" type="T">system-ID = SRD</Trace>
      <Trace level="3" type="T">client = 009</Trace>
      <Trace level="3" type="T">language = E</Trace>
      <Trace level="3" type="T">user = WF-BATCH</Trace>
      <Trace level="1" type="Timestamp">2011-03-08T02:25:46Z CST</Trace>
      <Trace level="1" type="T">* *</Trace>
      <Trace level="1" type="T">* *</Trace>
      <Trace level="1" type="T">****************************************************</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">Message-GUID = 4D71A759FF9E00D8E1008000B9F06E02</Trace>
      <Trace level="1" type="T">PLNAME = SENDER</Trace>
      <Trace level="1" type="T">QOS = EOIO</Trace>
      <Trace level="1" type="T">Queue-Id = ORD4000000482</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
    - <!--  ************************************
      -->
      <Trace level="3" type="T">QOS = EOIO</Trace>
      <Trace level="3" type="T">Message-GUID = 4D71A759FF9E00D8E1008000B9F06E02</Trace>
      <Trace level="1" type="T">Get definition of external pipeline = SENDER</Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
      <Trace level="3" type="T">External PLID = SENDER</Trace>
      <Trace level="3" type="T">Internal PLID = SAP_SENDER</Trace>
      </Trace>
      <Trace level="1" type="T">Get definition of internal pipeline = SAP_SENDER</Trace>
      <Trace level="3" type="T">Generate prefixed queue name</Trace>
      <Trace level="1" type="T">Queue name : XBQSORD4000000482</Trace>
      <Trace level="1" type="T">Generated prefixed queue name = XBQSORD4000000482</Trace>
      <Trace level="1" type="T">Schedule message in qRFC environment</Trace>
      <Trace level="3" type="T">Setup qRFC Scheduler</Trace>
      <Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
      <Trace level="3" type="T">Call qRFC .... MsgGuid = 4D71A759FF9E00D8E1008000B9F06E02</Trace>
      <Trace level="3" type="T">Call qRFC .... Version = 000</Trace>
      <Trace level="3" type="T">Call qRFC .... Pipeline = SENDER</Trace>
      <Trace level="3" type="T">OK.</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="T">Going to persist message</Trace>
      <Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
      <Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
      <Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
      <Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="3" type="T">Version number = 000</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
    - <!--  ************************************
      -->
      <Trace level="3" type="T">Persisting message Status = 001</Trace>
      <Trace level="3" type="T">Message version 000</Trace>
      <Trace level="3" type="T">Pipeline SENDER</Trace>
      <Trace level="1" type="T">--start determination of sender interface action</Trace>
      <Trace level="1" type="T">select interface PurchaseOrderRequest_Out</Trace>
      <Trace level="1" type="T">select interface namespace http://sap.com/xi/SRM/Procurement/Global</Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE">
      <Trace level="3" type="T">Trace object available again now. OK.</Trace>
      <Trace level="3" type="T">Message was read from persist layer. OK.</Trace>
      <Trace level="3" type="T">Message properties in XMB object were setup. OK.</Trace>
      <Trace level="3" type="ToDo">Make sure we catch exceptions in persist read</Trace>
      <Trace level="3" type="ToDo">Tracing obj. not avail. before return of CL_XMS_MAIN-PERSIST_READ_MESSAGE</Trace>
      </Trace>
      <Trace level="1" type="T">Work Process ID: 725194</Trace>
      <Trace level="3" type="T">message version successfully read from persist version= 000</Trace>
      <Trace level="2" type="T">Increment log sequence to 001</Trace>
      <Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
      <Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="T">Starting async processing with pipeline SENDER</Trace>
      <Trace level="3" type="T">system-ID = SRD</Trace>
      <Trace level="3" type="T">client = 009</Trace>
      <Trace level="3" type="T">language = E</Trace>
      <Trace level="3" type="T">user = WF-BATCH</Trace>
      <Trace level="1" type="Timestamp">2011-03-08T02:25:46Z CST</Trace>
      <Trace level="1" type="T">----
    </Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC">
      <Trace level="1" type="T">Get definition of external pipeline SENDER</Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
      <Trace level="3" type="T">External PLID = SENDER</Trace>
      <Trace level="3" type="T">Internal PLID = SAP_SENDER</Trace>
      </Trace>
      <Trace level="1" type="T">Corresponding internal pipeline SAP_SENDER</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">Pipeline attributes</Trace>
      <Trace level="3" type="T">PID = SAP_SENDER</Trace>
      <Trace level="3" type="T">ENABLE = 1</Trace>
      <Trace level="3" type="T">TRACELEVEL = 0</Trace>
      <Trace level="3" type="T">EXEMODE = A</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T" />
      <Trace level="3" type="T">Pipeline elements</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_CALL_INTEGRATION_SERVER</Trace>
      <Trace level="3" type="T" />
      <Trace level="1" type="Timestamp">2011-03-08T02:25:46Z CST Begin of pipeline processing PLSRVID = SENDER</Trace>
    - <Trace level="1" type="B" name="PLSRV_CALL_INTEGRATION_SERVER">
      <Trace level="1" type="Timestamp">2011-03-08T02:25:46Z CST Start of pipeline service processing PLSRVID= PLSRV_CALL_INTEGRATION_SERVER</Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
      <Trace level="3" type="T">Calling pipeline service: PLSRV_CALL_INTEGRATION_SERVER</Trace>
      <Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_CALL_INTEGRATION_SERVER</Trace>
      <Trace level="3" type="T">PLSRVTYPE =</Trace>
      <Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
      <Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_IE_ADAPTER</Trace>
      <Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
      <Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
      <Trace level="3" type="T">FL_LOG =</Trace>
      <Trace level="3" type="T">FL_DUMMY = 0</Trace>
      <Trace level="3" type="T" />
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
    - <Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-ENTER_PLSRV">
      <Trace level="1" type="T">URL for integration server read from global configuration</Trace>
      <Trace level="1" type="T">URL= dest://SAP NETWEAVER XI</Trace>
    - <Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP">
      <Trace level="2" type="T">Addressing mode: CallIntegrationServer</Trace>
      <Trace level="3" type="T">URL = dest://SAP NETWEAVER XI</Trace>
      <Trace level="3" type="T">Host =</Trace>
      <Trace level="3" type="T">Port =</Trace>
      <Trace level="3" type="T">Transport protocol = HTTP</Trace>
      <Trace level="3" type="T">Message protocol = 003000</Trace>
      <Trace level="3" type="T">Path =</Trace>
      <Trace level="3" type="T">Attributes of destination: SAP NETWEAVER XI</Trace>
      <Trace level="3" type="T">Type = H</Trace>
      <Trace level="3" type="T">Pipeline =</Trace>
      <Trace level="3" type="T">Action = EXECUTE</Trace>
      <Trace level="3" type="T">Host = mxwpides</Trace>
      <Trace level="3" type="T">Port = 50000</Trace>
      <Trace level="3" type="T">Client = 001</Trace>
      <Trace level="3" type="T">User = PIAPPLUSER</Trace>
      <Trace level="3" type="T">Language =</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="T">SSL not active</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="3" type="T">Creating HTTP-client</Trace>
      <Trace level="3" type="T">HTTP-client: creation finished</Trace>
      <Trace level="3" type="T">Serializing message object...</Trace>
      <Trace level="1" type="T">HTTP Multipart document length: 8089</Trace>
      <Trace level="3" type="T">HTTP-client: sending http-request...</Trace>
      <Trace level="1" type="T">HTTP-client: request sent</Trace>
      <Trace level="3" type="T">HTTP-client: request sent</Trace>
      <Trace level="3" type="T">HTTP-client: Receiving http-response...</Trace>
      <Trace level="1" type="T">HTTP-client: response received</Trace>
      <Trace level="3" type="T">HTTP-client: checking status code...</Trace>
      <Trace level="1" type="T">sap-xi-messageid 4D71A759FF9E00D8E1008000B9F06E02</Trace>
      <Trace level="1" type="T">HTTP-client: status code = 200</Trace>
      <Trace level="3" type="T">Deserializing message object...</Trace>
      <Trace level="1" type="T">HTTP-client: parsed & response message object created</Trace>
      <Trace level="3" type="T">HTTP-client: closing...</Trace>
      </Trace>
      </Trace>
      </Trace>
      </Trace>
      <Trace level="1" type="Timestamp">2011-03-08T02:25:47Z CST End of pipeline service processing PLSRVID= PLSRV_CALL_INTEGRATION_SERVER</Trace>
      </Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
      <Trace level="3" type="T">Persisting message after plsrv call</Trace>
      <Trace level="3" type="T">Message-Version = 001</Trace>
      <Trace level="3" type="T">Message version 001</Trace>
      <Trace level="3" type="T">Pipeline SENDER</Trace>
      </Trace>
      </Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="T">Async processing completed OK.</Trace>
      <Trace level="3" type="T">system-ID = SRD</Trace>
      <Trace level="3" type="T">client = 009</Trace>
      <Trace level="3" type="T">language = E</Trace>
      <Trace level="3" type="T">user = WF-BATCH</Trace>
      <Trace level="1" type="Timestamp">2011-03-08T02:25:47Z CST</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
    - <!--  ************************************
      -->
      <Trace level="3" type="T">Persisting message Status = 003</Trace>
      <Trace level="3" type="T">Message version 002</Trace>
      <Trace level="3" type="T">Pipeline SENDER</Trace>
      <Trace level="1" type="T">--start determination of sender interface action</Trace>
      <Trace level="1" type="T">select interface PurchaseOrderRequest_Out</Trace>
      <Trace level="1" type="T">select interface namespace http://sap.com/xi/SRM/Procurement/Global</Trace>
      <Trace level="1" type="T">--start determination of receiver interface action</Trace>
      <Trace level="1" type="T">Loop 0000000001</Trace>
      <Trace level="1" type="T">select interface</Trace>
      <Trace level="1" type="T">select interface namespace</Trace>
      <Trace level="1" type="T">--no interface action for sender or receiver found</Trace>
      <Trace level="1" type="T">Hence set action to DEL</Trace>
      </SAP:Trace>
    Thanks. 
    best regards

  • Not Receiving Emails on my Tour9630

    Thursday I didn't get any emails from my external email accounts (Yahoo, Hotmail, Work) until 11:40PM Pacific then I got a whole days worth.  Since then I haven't received anything.
    My phone works, text messaging works, the brower works, I can see the emails when I go to the websites on the PC or BB Browser.  Facebook (no notifications though because they come through email) and Twitter apps work.
    I sent a test email from my BB from my yahoo account to my hotmail account and it did send.
     I have taken the battery out and restarted it.  There arent any errors or anything I'm just not receiving the emails.

    There was an outage about that time.  However, I figured it had been fixed by now.  If you still aren't receiving emails you should contact your carrier.
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Maybe you are looking for

  • How can I make the 'remote' app work across a routed network?

    So, I have trusted and guest networks, with iTunes running on a Mac on the trusted network. I'd like iOS devices on the guest network to be able to use the 'remote' app, specifically the DJ function. I think there will be two components: -- service d

  • How do i transfer files from old mac with frozen screen?

    My PowerBook G4 just froze. I bought a new MacBook Pro. How do I transfer files from my old mac to my new one. I have firewire cable with firewire adapter for the new Mac. And the old mac has a disk that won't eject.

  • F110 Auto payment with Check in foreign currency and Doc currency is LC

    Hi Guru, When I try to use auto payment for document currency in local currency, while check is foreign currency, it always in the expception list, could you advice how to handle this scenario. thanks.

  • In search of a 'special' number range of validator

    Hi, I am developing a JSF based web page with a text field that can hold numbers. I want to add number range to this text field so that user does not enter more than a allowed range of numbers. I am aware of multiple options JSF and its various flavo

  • MBA screen freeze

    Hi I have a mid 2013 MBA 13" that I bought late August and two weeks after I got it the screen suddenly froze.  It freezes increasingly often, now at least once every 24 hours , and regardless of what I am doing (ical, excel, itunes, mail, safari, ev