Wm issue creating new interim storage bins

Hi
How to create new interim storage area and assign to movement types
G N Kumar

PLease confirm whether it is interim Storage Type or storge bin, i think it would be interm storage type (ext area for GR/ shipping area for GI - normally storage types with 9 series). If this is the case, you can do in the same way storage types are created and assigned to movement types.
Please follow the below link for more info
http://help.sap.com/saphelp_erp2005vp/helpdata/en/c6/f85c504afa11d182b90000e829fbfe/frameset.htm
regards
arun

Similar Messages

Effect of issuing Material directly from Interim Storage BIN?

Dear Experts,
What is effect of issuing(311) material directly from Interim storage BIN without storing to Storage BIN.
Because i am unable to do LB11& LB12 for both GR's(101) and TP(311) as it has directly picked from Interim Storage BIn to do
TP(311).
So please someone explain me the effect of the above Scenario?
Thanks & Regards,
Olet Malla

You can do it but in general you should not allow picking from interim Storage Types. For example you don't want Sales trying to pick materials sat in the PSAs, you don't want Production trying to pick from materials in 916 etc. etc.

INterim storage bin to unrestricted stock movemnet

Dear All,
I have a problem in warehouse management
Step 1 After the GR(65000 units) my system will automatically create a TR and TO to the quality inspection .
Step 2 will clear the inspection lot by giving a Usage decision through the T.code QA32 to move the stock from quality to unrestricted stock
step 3 But the stock will not be going to the unrestricted area instead it is going to the intrim storage type 922 TR-Zone.
Step 4 If i see in the LS26 i am able to see the stock for put away as 65000 units and pick quantity as 65000 units and the stock type as quality
So the stock is still in quality, if i see the PO also it is showing that the stock is in quality
How can i move this out of the interim storage bin
I am pretty new to WM kindly advice me how to go about this ,
Regards,
D vasanth

A PCN must have got created. Go to LU04, mtype 321, enter your material. It will display the PCN if any exists.
Select the PCN and create Transfer Order and confirm the TO

Available stock shortfall of & in Interim storage bin message in BAPI_GOODSMVT_CREATE

Hello Abapers,
I have created a Zprogram and used a standard function module BAPI_GOODSMVT_CREATE.
while processing this FM, Iam getting error messages in return table as "Available stock shortfall of & in Interim storage bin".
Please help or suggest.
Regards
Pradeep

Searching on the forum you can find threads about WM/PP interface settings.
(Re: WM Staging - Supply area to Production prder)
Whether WM/PP interface is active it depends on your config and master data as well.
You should check:
- config: SPRO > LE > WM > Interfaces > Define Production
- master data: routing (proper work center is assigned), work center (proper production supply area), material master(FG) (production scheduling profile), control cycle (components)
In standard system storage type 100 is defined as an interim storage type (you can compare it to storage type 902, 914, 916, etc). In control cycles (WM master data; LPK1/LPK2/LPK3) you define for each components which is the production storage type.
In standard system storage type 914 is not used with material staging. 914 s.t. related scenario: GI (261) --> stock removel from normal storage type to interim storage type (914).
100 s.t. related scenario: stock removal from normal s.t. to interim s.t. 100 --> GI (261).

Available stock in interim storage bin

Dear all
I Create GR Returns 161 with MIGO, I have message error
"50012541 ; available stock in interim storage bin around 1,000.000 KG below target
Message no. L9040
Diagnosis
In Customizing, the setting is such that no negative stock is allowed in storage type 916. However, this posting will cause negative stock to exist in storage bin 0000000000 of storage type 916. "
Can anyone help me ?
thanks
imron

Dear
I created cutomazing in Spro>Logistic Execution>Warehouse management>Activities>Transfer>Define Movement types :
- Movement Type = 161 (Returns PO)
- Dest                  = 916
- Shipment Type   = A (Stck removal)
- Requirement type =    B Purchase Order
- manual TO creation not allowed
- manual TR creation not allowed
And then I created TO with LT01 using move type 161 and requirement type = B
Now stock in Storage Type 916 was there with qty 1000
But When try again to Create GR (MIGO-161- PO return)
the error still "50012541 ; available stock in interim storage bin around 1,000.000 KG below target
Message no. L9040
Diagnosis
In Customizing, the setting is such that no negative stock is allowed in storage type 916. However, this posting will cause negative stock to exist in storage bin 0000000000 of storage type 916. "
Can u help me, please
thanks

Generate Interim Storage Bins

Hi,
a SAP standard system in SPRO, Logistics Execution, Warehouse Management, Interfaces, Generate Interim Storage Bins contains any storage bin ?
Best regards

Hi,
Goods transfers in the WM system are processed by means of movement types. In the definition of the
movement types, it is possible to have interim storage bins addressed. you can have these bins generated automatically
Example:
According to the definition of the WM movement type 501 (GR without Purchase order), the material is posted to the material storage bin automatically.
If you do not want to use this option, you have to create the storage bins maually using
WM-Master Data-Storage Bin-Create-Manually
Activities: Generate the interim storage bins for your warehouse numbers
Thanks,
DV

Interim storage bins creation, List of standard interim storage bins

Hi,
We need to create interim storage bins as part of cutover. can someone provide me list of standard interim storage bins to be created. Which transaction will be used to create interim storage bins
Thank you

Hi,
You can use the transaction LX20 to create interim bins.
Following interim bins will be available in the standard.
001     901    WE-ZONE
001     902    WE-ZONE
001     910    WA-ZONE
001     917    QUALITAET
001     920    UML-ZONE
001     921    UML-ZONE
001     922    U-ZONE
001     980    DUMMY
001     998    AUFNAHME
001     999    DIEBSTAHL
001     999    SCHROTT
Thanks & Regards,

Available stock shortfall of & in interim storage bin

Hi gurus,
I am doing the movement type 261 in MIGO with reference to a reservation.
I am working with Warehouse Management and I want to know why the system is defined in automatic the storage type 100?
When I am doing the movement 261, I know that I have stock in the storage type 007 and I am putting this, but, the system is showing the following error message:
100000000026; Available stock shortfall of 10.000 M2 in interim storage bin
Message no. L9040
Diagnosis
In Customizing, the setting is such that no negative stock is allowed in storage type 100. However, this posting will cause negative stock to exist in storage bin HE01 of storage type 100.
For my storage type 100 I do not have defined any strategy in the customising.
Could you help me with this, please?
Kind regards.
SP

Searching on the forum you can find threads about WM/PP interface settings.
(Re: WM Staging - Supply area to Production prder)
Whether WM/PP interface is active it depends on your config and master data as well.
You should check:
- config: SPRO > LE > WM > Interfaces > Define Production
- master data: routing (proper work center is assigned), work center (proper production supply area), material master(FG) (production scheduling profile), control cycle (components)
In standard system storage type 100 is defined as an interim storage type (you can compare it to storage type 902, 914, 916, etc). In control cycles (WM master data; LPK1/LPK2/LPK3) you define for each components which is the production storage type.
In standard system storage type 914 is not used with material staging. 914 s.t. related scenario: GI (261) --> stock removel from normal storage type to interim storage type (914).
100 s.t. related scenario: stock removal from normal s.t. to interim s.t. 100 --> GI (261).

Stop IM posting from interim storage bin

Hi,
We have a WM activated where the Transfer order is created and posted automatically when any material movement is posted.
Now when the stock in WM is already allocated to delivery still its possible to post the IM.
For e.g.
1 peice of material 'ABC' is available in IM and also in warehouse. A outbound delivery is created which has trigered a transfer order. Now the stock is lying in 916 interim storage type.
other user does a transfer posting movement (311 movement) of same material. Since the material is not available in the normal storage type, the transfer order is not created automatically.
Now the stock lies in 921 interim storage type.
I want to avoid such scenario. Is it possible to stop any posting in IM if the stock is not available in the normal storage type?
Regards

Hi Frenchy,
Thanks for your valuable input. This was something new for me.
I checked the settings in OMM8, the 'No stringent FIFO setting' is there for all the Interim storage type.
I think this will not help because when the IM posting is done, since there is no stock in normal storage type, system is not creating a transfer order (as per customization which is to created TO automatically). It only creates a open transfer requirement without finding a source storage bin.
However we have found another way to stop the posting. we have set a availability check rule to the transaction and movement type in IM which check the available stock during the posting and sets a waring/error message.
However this is at IM level.
Is it possible to stop the posting at IM via some setting in WM?
Regards

Create Interim Storage Area

What are the steps to creating an Interim storage area?
I cannot get past the first screen in LX20, after I enter my warehouse number, neither 'execute' nor 'enter' will take me to the next screen. If I choose to 'post', then it just takes me to a screen with options that ask me for Variant Names and Meanings.
What I am trying to do is create an interim storage area for the transfer of materials from one storage location (non-WM), to a storage bin in WM. Will I have to create a new storage area to interact with this Interim storage area and my warehouse number?

Hi ,
sorry,i thought you are taking about MVT 210. But instead your WH no is 210 ???? And it is not maintained in T333A .
That means you have not defined shipment types in that warehouse . Tell me how do you created this warehouse ? It will be very difficult to you if you have not created it correctly . Always copy from a standard warehouse . Now to create shipment goto
IMG -- LE--> Warehouse management >Activities>Transfers-->Define Shipment Types and define E against 210 warehouse there .
But my suggestion is copy the tables , structures from one standard warehouse to your 210 warehouse so that you don't have to maintain all these . Because there are thousands of settings . To do so
goto IMG >Enterprise Structure>Definition>Logistics Execution>Define, copy, delete, check warehouse number>Copy/delete/check warehouse number>now click on COPY AS -
give From warehouse 001 and TO warehouse 210.
Regards,
Anupam
Edited by: Anupam Halder on Jul 31, 2009 1:02 AM

Storage Bin for Interim Storage Type 902 for GR

Hi,
We know that the the dynamic storage bin for goods receipt for PO is the PO number. However, when we are posting GR, system creates TR with interim storage bin as material document number.
I looked into the movement type config. However, we can only state that whether interim bin should be cordinates or fixed bin or dynamic bin. It has no way to mention what that dynamic bin would be.
Can you please suggest a way to change the dynamic storage bin as PO number instead of material document number.
Thanks,
Shekhar

Dear Shekhar,
Could you please check in view V_T308 (transaction code OMNF) whether the indicator "Dynamic bin material document" is set for your warehouse number and requirement type B?
Best regards,
Christiane
Edited by: Christiane Schnellenbach on Apr 12, 2010 10:25 PM

Creating dynamic storage bins

When you define a movement type, you can set up the system to create dynamic storage bins in the assigned interim storage area. In this case, the system uses the document number which triggered the stock movement as the coordinates for the interim storage bin.
For example, for a goods receipt, you can set up the system to use the purchase order number as the storage bin coordinates in the interim storage area for goods receipts.
These coordinates only exist as long as the quant is in the interim storage bin; afterwards, they are deleted.
Where do I do the config for the above scenario..
I tried creating bins for interim storage typees in LX20....after creating an interim storage area through referencing standard ones in IMG... I cant understand how the system creates dynamic bins for the movement type. Please help

LX20 is for static bins.
The dynamic ones are created automatically by the system when the stock is moved to the area.
In the movement type configuration in the WM:
(LE -> WM -> Activities -> Define movement types)
Select your movement type and warehouse and make sure the SCR box is checked
Also check that the field is mapped correctly for the dynamic bin in
LE-> WM -> Activities -> Define Requirements
Field Name is what is grabbed

Storage bin AUFNAHME, SCHROTT and TR-ZONE

Dear all,
is there any somebody can explain Storage bin AUFNAHME, SCHROTT and TR-ZONE ?
Thanks & Regards

Hi Arif,
These are storage bins created in interim storage areas. E.g. when goods enter a warehouse, usually they are not directly sent to the final storage bins, since they need to be unpacked, checked etc. So they are temporarily stored on some table e.g. for unpacking etc. Once everything is done, the material is moved to the final storage bins in the shelves etc.
The bins you have mentioned are these temporary bins. For every different process (goods receipt from sales, GR from prod, goods issue to customer etc), the is a different bin (in standard SAP).
Hope this explains.
Regards
Nikhilesh

Why do we need Interim Storage Type ?

Why do we need Interim Storage Type ? If you say it's acting as an intermediatary buffer location... Then why don't we need any Interim Storage for Bin to Bin stock movement??
Any pointers will be appreciated .

You have answered the for your question number 1.
I am going to answer for your question number 2:
We usually have interim storage bins in interim storage types. But these will disappear after the stock moved from interim bins.
This interim storage type/bin concept is created to map the real business process. Let's talk about the examply GR from supplier. Usually,
Warehouse personnel, unload the stock from truck and keep a place called staging area. This is in SAP called Interim storage area.
At this time, transaction is completed for IM side, Ie the material document is created and MM-WM trigger point TR also created. and depends the SAP config settings, this TR may be converted to as a TO and waiting for the confirmation.
Hope it helps.

Multiple storage bin for single material

Hi,
We wanted to assign multiple storage bins in the material master as the material is stored in mutilple storage bin in the same storage location. We are not using WM.
We want to resolve the issue without implementing WM.
Please advice where and how do we maintain the same.
In plant data / stor 1 view there is a provision for maintaining only one storage bin.
Thanks,
Reddy

it is not possible without WM.
As workaround :
You either create for each storage bin a storage location,
or
you active batch management and let the batch work as bin.

Wm issue creating new interim storage bins

Similar Messages

Maybe you are looking for