WM - LX04 Capacity used per Storage Type
Hi,
When I run LX04, for one Storage type I don't receive number and % of bins occupied.
If you can help me on it.
Thanks
Pascal.
Message was edited by: Pascal FRECINAUX
Yes, I selected 'only unblocked bins'.
I thought, it's was a customizing problem but I don't know where I can change it.
Other storage location works.
Similar Messages
-
ECC6.0 WM creation of one TO per Storage Type
Hello,
I'm currently implementing WM at my customer using various Storage Types. During testing we created GR in IM for 2 materials (in one document), one of them is relevant to quality inspection but the other one is not.
TO creation has been done automatically (as expected) from interim storage type 902 GR area) to interim storage type 917 (quality area) for the first position. Also a position for the second line has been created from 902 to storage type 042 (main shelf).
Technically this is all OK. However I was expecting to have 2 TO's instead of 1 TO with 2 positions. How can I trigger the system to create a seperate TO per destination storage type?
Thanks beforehand big time!
AlexHi,
It was working at the time I posted...so, please complain at SAP AG...
You can use this link to access online SAP help:
http://help.sap.com/
('SAP R/3 and R/3 Enterprise' - on the left)
E.g.
http://help.sap.com/saphelp_47x200/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm
(you can use search term 'Transfer order split')
http://help.sap.com/saphelp_47x200/helpdata/en/c6/f83df24afa11d182b90000e829fbfe/frameset.htm
Additionally you can use this as well:
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LEWM/MMWM.pdf
BR
Csaba -
Storage unit types per storage type
Hello all,
i would like to know how to maintain/allow storage unit types per storage type. it would be much helpful if you could mention the SAP IMG path and the t-code.
thanks,
MaxxHi,
Goto SPRO --> Logistics Exection --> Warehouse Management --> Master data --> Define Storage type
In this node for your warehouse number and storage type combination activate the check box SUT check active.
Regards,
DilliB -
Storage unit type allowed per storage type
Hello all,
i would like to know how to maintain/allow storage unit types per storage type. it would be much helpful if you could mention the SAP IMG path and the t-code.
thanks,
Maxx1)Storage unit type is assigned to the eacj warehouse number.
2)It is activated for each storage type in the warehouse.
3)Goto SPRO->LE->Warehouse mangmt->Mater Data->Material->Define storage unit type.
4)Here you assign storage unit type to warehouse number
5)You can activate SU mngmt at warehouse level here:
SPRO->LE->Warehouse mangmt->Storage Unit->Master Data->Activate SU mngmt per warehouse number
6)You can also activate SU mngmt at storage type level
SPRO->LE->Warehouse mangmt->Master Data->Define storage type.
Reward if helpful -
WM: TO creation splitting per storage type
Hi all.
I would like to know how to split a GR in different TO and the different possibilities:
per storage type
one item (in material document)=one TO per item
Is it customizing? Does a user exit exist?
Many thanks in advance!!!!In config. see all the options under:
Logistics Execution \ WM \ Activities \ Transfers \ Processing perf. data \ TO split
Sort and split TO items
You can assign a performance data profile to a transfer order with the movement type key, source storage type key or the destination storage type key. Since the storage types are on the item level rather than header level in the transfer order, an implicit split is executed for transfer orders with performance data profiles, which makes the performance data profile valid for all items.
An explicit split may be preferable for organizational reasons. Some examples include executing a split according to picking areas or when a parameter barrier for volume, weight, or target time is reached. A suitable TO item sort is a prerequisite for a meaningful split.
Regards,
Nick -
Overview fields used per document type in MM and FI
Hello All,
iIs there a possibility to get an overview of all fields used (mandatory, optional etc.) for each document type in MM and FI? I want to create a list which fields per document type are used in both MM and FI and which are only used in MM or FI.
Thanks in advance for answers!Hi,
You can point out all the fields with
1) At the time of defining Screen lay out for purchasing (NBF) in MM for GR-IR Control.
2) or you can tally which tables are conjugated with MSEG from SE11.
Might this will clear you.
regards,
Ninad -
Fixed bins to be defined in a storage type
I have multiple materials in a storage type in which some of the bins need to be assigned as fixed bins and some of them not. Is this possible ? I have a requirement to use the fixed bins to be replenished from High rack.If this is not possible then I need to create so many sections to make sure each material need to be putaway in one assigned bin for that material.
Any ideas?PutAway and Picking Strategies are determined at Storage Type level.
So you can only have one strategy per Storage Type : either FIXED BINS or another strategy.
One Storage type does not have to be BINs next to one another.....
In the same physical space you can have two storage types where some BINs are Fixed Bins in one Storage Type and some BINs are not fixed Bins in the other Storage Type....that is one possibility.
If that is not possible, then I would look at having a PutAway and Picking Strategies that are so restrictive for each material that they have to go to a specific BIN .
Those are only a few ideas, it really depends on what your constraints are, how many materials are concerned, etc....
And finally, there is the user-exit option.....
Edited by: AGagnon on Aug 11, 2010 11:31 PM -
MLGT - How to find the Storage Type
Hello,
I have been trying to use MLGT to find the storage type but I have discovered this table does not have all the records. For example - I know that material AAAAAA using Wharehouse number BBB should show CCC for Storage type but when I look in MLGT I see that AAAAAA does not have a record that uses wharehouse number BBB. When I look in MM03 I see that the material has CCC for the storage type.
Does anyone know why this table would not have all the records? Is there a better table to get the storage type?
Thanks,
MattI am not able to catch what you try to achieve.
MLGN-LTKZE is just an indicator. if it has the name of a storage type, then either by design or just by chance.
SAP takes this indicator to lookup the placement strategy. (setup in trx OMLY).
There you can see all possible storage types.
A storage type view at a material master is almost only needed if you use fixed bin strategy. then you can specify the fixed bin per storage type in a material. -
What storage type number can be used
HI,
if I need to customize out a storage type, what prefix number can I used such that it would not be overwritten during upgrading?
currently available in SAP
001 High rack storage
002 Shelf storage
003 Open storage
004 Bulk storage
005 Fixed bin storage
006 Hazardous Materials
007 Pallet storage
010 High rack with ID point
011 ID point for st.ty.010
012 Block storage with SUs
013 Pick point for st.ty.012
100 Production supply
200 Intermed.zone 2-step pck.
Thankshi colin,
its purely depend upon your requirement. when u want to place a raw material like ex: nuts,bolts place it in a 001-high rack storage bin or u want place it in a fixed bin -005.explain your product i can able to suggest the storage bin.
use any number as per your wish it doesnt affect during upgrading.
regards
muthuraman.d
Edited by: muthuraman d on Jan 12, 2010 9:09 AM -
Create T.O using outbound delivery. Need to update the storage type.
Hi All,
I am using L_TO_CREATE_DN to create a T.O using an outbound delivery. It creates the T.O. But I need to decide at the time of creating the T.O the storage type to be used.
I tried using the F.M L_TO_CREATE_MULTIPLE but that does not update the Delivery flow.
I have already gone over the discussions on forums for L_TO_CREATE_DN but none seem to answer the question of updating the line items of the transfer order yet.
I was hoping someone could help me out with this.
Thanks,
ArupHey,
Well I do not need to be worried about the storage bins as that is a selection based on a FIFO strategy. It is returned by the system.
I need to worry about the storage type.
So here is the complete requirement.
I have to create TO's for LM05 and LM45. The LM45 To's have to be associate with storage units and this association occurs only if I choose VWT as the storage type..
When I choose VWO as the storage type then the items are not associated with a Source Storage Unit. This is because the storage type VWO does not have SU management active whereas VWT has SU management active.
So, what I am primarily concerned about is the way I could enter the storage type information dynamically.
Arup -
User exit Used while defining the storage type
Hi all,
Can anybody tell me about the user exit Used while defining the storage type.
or what is the user exit name?
i want to define my own strategy.
i.e combine manual sut entry with strategy 'k'HI all I Got the Exit MWMTO003.
Now ,
Following Logic is to be built. (Storage type strategy is K for putaway.)
u201CManually selection of SUTu201D while Putaway , For Strg -K SUT selection is
system guided.
Which componant is required for this. Pls guide.
Is the above requirement is possible?
Edited by: dev .. on Feb 19, 2009 1:58 PM -
Selection Criterion of Contents Server's Storage Types : Used by Generic Object Services
Hi experts.
I'm considering Contents Server Storage Types of attached files uploaded by Generic Object Services.
I want to adapt Storage Type that can be housekeeped by specifying retention period.
Please give me how to housekeep and how to use the benefits of each Contents Server Types.
Regards,
Taiki ShojiHi Deepak,
I don't use Open Text.
When I attache file, I do following steps.
Select "Service for Object"
->Create
->Create Attachement
->Select attachement file and Open
Regards,
Taiki Shoji -
Can we use any exit of COR1 to include storage type?
Hi experts
Our requirement is to add storage location & storage type check while creating process order in COR..
I found that we have one user exit PPCO0005 by which we can change the storage location..
Please explain me how can I do that & how can I include storage type in that..
THanks & RegardsHi
Thanks for your response..
In that given exit we can add our logic for the storage location but can we add the same to include storage type..
Please explain.. Also how can we add logic for the storage location.. Handling user exits for the first time.. kindly guide...
@Nambiar : I need to add storage type in material availability check when it haapens when we enter reqd qty while creating process order in COR1
Thanks & Regards -
High Level Bin Search, before Storage Type Search
Hi,
Can anyone help me to guide, which user Exit/Badi, be used for searching Empty bins, before storage type search. I come to know from one of colleague below message.
"" if you want to check the quantities on a higher level (before storage type search ), you can use the user exit "+++".""
I am unable to understand which kind of user exit "+++".
Background: Want to do putaway with storage type 007: Our high rack is having space (Bins) with different capacity. One rack can have 4 type of racks.
We want to putaway material with different bin types in one storage type.
Regards,
Mainsh GuptaHi Vijay,
Thanks for your quick reply. I am trying user exit given by you. Once again I would like to submit my requirements here.
a) We have 98 racks in Warehouse.
b) Product is Ball Bearing.
c) Bearings are handeled in Ea, Issue and Stock unit is Ea
d) Alternate Unit of Measure is Box, i.e. per box quantity is mentioned into Material Master.
e) Each Rack is having 5 different type of bins.
f) We want to fill rack from bottom to top for first rack, and then next rack.
g) Once we do putaway for any material, each time system should pick Next empty bin, and each bin type is different.
Case 1) If going with Storage Type 007:
i) Need to maintain palletization data in Material master WM view 2.
ii) Can not maintain any capacity check for Capacity utilization in Material Master. Capacity is only Pallatization data.
iii) While creating TO, System goes for placemet of material from bottom to Top in Rack, but give similar quantity for each bin, & these quantities are defined from Material Master from Palletization data.
iv) In this case it is not checking bin capacity.
My query:
i) How can we split quantity during TO Creation based on Next Empty Bin avaialbe with certain capacity and all further bins with other capacity.
ii) Can we have different type of bins in one storage type if we are going for Storage type 007. or it is mandatory to have similar kind of bins.
Case 2) If going for Storage type 002:
i) Not maintined Palletiztaion data in Material master.
ii) Maintining capacity check in WM View 1.
iii) Maintained Capacity check in Bin master.
iv) WHile careting TO , system doesnot spilt quantity for next empty bins avaialbe, Only one line item comes for whole quantities. and system throw an error.
Message Number: Message no. L3068
Message Details: Maximum quantity for storage bin TR-15 will be exceeded by 740.000 PC
My query: How can we split TO quantity as per next empty bins available.
If you will give me your contact number, I can speak to you over phone and eleborate in more details for your clear understanding my issue.
Regards,
Manish -
User Exit for Put Away for multiple storage type
Hi All ,
we are using the exit EXIT_SAPML03T_002 for doing some capacity calculation and bin selection while doing a put away process in Ware house .
now i want to have two different type of storage types
say
A and B ,
if their are no empty bins in storage type A , then as per storage section search strategy the material should go in B storage type.
Both the storage type has next empty bin search strategy with user exit activated.
The difference between the two storage type is their individual capacity which is maintained in a custom table .
I am facing the problem that the exit is getting triggered only once .
ie. it will check for storage type A if the criteria is not met at a later stage while bin allocation , the system is not triggering the exit for B storage type .
do i need to do all validation and possibilities of not getting placed in storage type A in the exit . or does this exit will trigger for each storage type as per strategy if for any reason the stock is not placed in the previous storage type ?Hi Experts
Thanks for the response,
As i tested for the 561 movement (initial upload) we need to do the put away manually.
So the system will not suggest Full qty to move to one Bulk and partial to different.
But for normal Goods receipt process the goods will be automatically placed to different storage type
based on the search strategy and in the Bulk structure we need to unchek the partial pallet allowed.
If anybody has difference pls revert
Regards
Depin
Maybe you are looking for
-
I've tried everything....including this....several times!!! 1. Update iTunes Check that you have the latest version of iTunes installed on your computer. In iTunes, select Check for updates in the Help menu. 2. Check the USB cable Verify that the 30-
-
HT1688 how can I tell if my iphone 4 has a virus
does my phone have a virus?
-
Where to build blog, based on these parameters
It's been a long journey with lots of reading and experimenting. The setting: I build my site in iWeb, Publish to Folder, add tags in iWeb SEO Tool, and FTP to GoDaddy. SEO is very important to me, though I haven't implemented everything on my to-do
-
Can I use iTunes to download iOS 8.0.2 once and then install on multiple new iPhone 5S we have at work? Our 30 new iPhone 5S came with iOS 7.1.1.
-
DDL_WAIT_FOR_LOCKS not works
Hello what is wrong? Why does the Session2 not wait? session1: Verbunden mit: Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production With the Partitioning, OLAP and Data Mining options SQL> insert into TestTable (ColumnId) values (2);