WM not detecting user login

Hello,
I face a strange issue in a ZFD3.2/NW6 environment, on some specific PCs
(for the moment HP Vectra VL800, may be others) all policies that should
run at user login are not running, ie Printer Policy is listed but as
"Never executed" and if you run it manually it does it without problems,
other policies like Group Policies associated with the users are not
displayed at all. This affects all users on these PCs. Finally this happens
since the PCs are upgraded to the vesion 4.9 of the client (tested all the
patches without success), the only way to correct the issue is to downgrade
the client to version 4.83SP3. Other models of PCs do not have the problems.
Thank you for any idea.
Patrick

Pambuhl,
It appears that in the past few days you have not received a response to your posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at http://support.novell.com in both the "free product support" and "paid product support" drop down boxes.
- You could also try posting your message again. Make sure it is posted in the correct newsgroup. (http://support.novell.com/forums)
If this is a reply to a duplicate posting, please ignore and accept our apologies and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Similar Messages

Not recognising user login password MacBook Pro

Hey people hope you can help! After installing new hard drive and transferring time machine data, my MacBook Pro is Refusing to recognise my password even after I have reset it using the startup disk. I enter user password on my admin user account and it goes blue briefly as if beginning load but the. Returns back to selecting user and entering password. It really strange as it does not say password incorrect its almost like it trying to load but can't. Any suggestions please?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

MacBook Pro 13 Early 2011 Battery Degradation to Not Detected, User Replaced New Battery also Not Detected, Please Help!

I have a MBP early 2011 13 inch and do not have Apple Care. After I installed Mountain Lion I noticed the battery health was dropping pretty rapidly, with a service battery warning. I tried resetting the SMC and PRAM and even a clean install. I took it into an Apple store and they said I should have cycled it more, but I could still use it. The health dropped and dropped until a battery would not even be detected. Because Apple would not replace it for me for free and I didn't want to pay for them to do so, I bought my own battery. Once I replaced the battery with the new one, it still says there is no battery connected.
When I detach the battery and then attach it again, the battery indicator lights on the side show 4 dots. When I plugged in the MagSafe connector, the fifth light started blinking (I thought it was charging) and then it went back to all of them blinking indicating no battery detected. The computer also automatically turned on when I connected the MagSafe.
I have tired multiple times to reset PRAM and SMC even after installing the new battery to no avail. I can use the machine with the MagSafe connected, but as soon as the cord is unplugged or bumped, it goes into the emergency sleep mode.
Any thoughts on what might be ailing this not yet two year old machine? My first Mac lasted 7 years before any logic board fail so I hope that is not it. Anything I should try that I haven't yet? Any ideas on what this might cost me through Apple?
Thanks!

Why don't you look through this to insure you did everything correctly:
http://www.ifixit.com/Guide/Installing+MacBook+Pro+13-Inch+Unibody+Early+2011+Ba ttery+Replacement/5116/1
Also, where did you get this battery?

See my code that i use for user login but my code not give me result

sir i use oracle with vwp in netbeans 6.1
i want creat a user login form
i drop three textfield and one button
in button i use this code for finding the user in database but this code not me result that go to catch (Exception e) all field in database is string
public String button1_action() {
try {
RowKey userRowKey = luserDataProvider.findFirst
(new String[] { "luser.username", "luser.pwd" },
new Object[] { textField1.getText(), textField2.getText() });
if (userRowKey == null) {
textField3.setText("fahim");
error("Invalid user id or password");
return "case1";
} else {
textField3.setText("aamir");
return "cust";
catch (Exception e) {
log("Cannot perform login for userid " + textField3.getText(), e);
error("Cannot perform login for userid " + textField3.getText() + ": " + e);
textField3.setText("NOOOO");
return null;
please give me idea how i find record from database
thank you
aamir

These are user-to-user forums, you are not talking to Apple here - so I've asked the hosts to remove your email address from your post.
The security code is the 3 or 4 digit code on your credit card, it's quite often on the back of the card on the signature strip, though on some cards it's on the front : credit card security code.

User account is not accessible for login, but remains in Users folder. Can it be re-activated?

My 18 mo old grandson hit a few keys on my wife's mid 2010 MbPro while she was logged in and eliminated her user login from the startup/login screen. I used resetpassword utility to reset p/w for System Administrator to access the machine and the user folder is intact. (The account also does not appear in the resetpassword pulldown list of users.) I have copied all of the folders except Library in her original account into a newly created account. Is there a procedure to (1) re-activate/re-access her original account, or (2) migrate her original Library information/settings to the new account?

User Account - Rebuild
User Account – Migrate Data
User Account – Combine Two

Not able to login to User management link in portal

Hi,
I am not able to login to "User Management" link from index.html page. When I enter user name and password, only page is getting refreshed and it is not logging in.
Error from default trace:
#1.5 #00188B34FD33006C0000002800007AC8000461B1DE2BD2F2#1233316471589#com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl#sap.com/tcwddispwda#com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl#J2EE_ADMIN#2018##mysapbw_BW7_23635150#J2EE_ADMIN#c13b1ba1eec411dd9cbb00188b34fd33#SAPEngine_Application_Thread[impl:3]_2##0#0#Error#1#/System/Server/WebRequests#Plain###application [webdynpro/dispatcher] Processing HTTP request to servlet [dispatcher] finished with error.
The error is: java.lang.NoSuchMethodError: com.sap.security.core.wd.umeuifactory.wdp.IExternalUmeUiFactoryCompInterface.hasSimplePermission(Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;)Z
Exception id: [00188B34FD33006C0000002600007AC8000461B1DE2BCF03]#
#1.5 #00188B34FD33005F000004A300007AC8000461B1E07DB217#1233316510512#com.sap.engine.services.security.authentication.logonapplication#sap.com/com.sap.security.core.admin#com.sap.engine.services.security.authentication.logonapplication.doLogon#J2EE_GUEST#0##n/a##d88d4300eec411dd9ac900188b34fd33#SAPEngine_Application_Thread[impl:3]_6##0#0#Error##Java###doLogon failed
[EXCEPTION]
#1#com.sap.security.core.logon.imp.UMELoginException
     at com.sap.security.core.logon.imp.SAPJ2EEAuthenticator.logon(SAPJ2EEAuthenticator.java:949)
     at com.sap.security.core.logonadmin.ServletAccessToLogic.logon(ServletAccessToLogic.java:208)
     at com.sap.security.core.sapmimp.logon.SAPMLogonLogic.doLogon(SAPMLogonLogic.java:914)
     at com.sap.security.core.sapmimp.logon.SAPMLogonLogic.uidPasswordLogon(SAPMLogonLogic.java:578)
     at com.sap.security.core.sapmimp.logon.SAPMLogonLogic.executeRequest(SAPMLogonLogic.java:158)
     at com.sap.security.core.sapmimp.logon.SAPMLogonServlet.doPost(SAPMLogonServlet.java:60)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Please help me in resolving this issue.
Regards,
Nallasivam.D

Hi,
After looking into the error first i dont think you are enter the right password.
In case if you are entering the right password then you might not have the necessary admin rights on portal.
Regards,
Ramanath

Not able to login using ORACLE USER in Linux

I am not able to login using OS user ORACLE in linux,
I am getting following error when trying to login
/etc/X!!/gdm/PreSession/Default : Registering your session with wtmp and utmp
/etc/X!!/gdm/PreSession/Default :running : /usr/bin/X11/sessreg -a -w /var/log/log/wtmp -u /var/run/utmp -x "/var/gdm/:0.Xservers" -h "" -1" : 0" "oracle"
/etc/profile: line 17 : syntax error near unexpected token 'then'
/etc/profile: line 17 ' if[ $USER = "oracle" ]; then'
Failed to execute message bus daemon : No such file or directory
EOF in dbus-launch reading address from bus daemon
I tried to edit /etc/profile file but not sucessfull. Please help me out . This installtion is on VM ware
Edited by: user12356407 on Dec 16, 2009 3:21 AM

user8896383 wrote:
I am not successful to login using Oracle User .
I tried to edit /etc/profile file on Line 17 , but of no use.
could you please be more precise about what exactly i should look in or edit in that file.
Thanks for your immediate response.My car doesn't start
I tried to fix it
It still doesn't start.
Can you be more precise in telling how to fix it.

Flash not working in any browser for one user login

Hello,
I recently got my macbook pro back from repair with a new logic board, and all of a sudden Flash doesn't seem to work in any browser (Chrome, Safari, Firefox) for my main user login. It crashes nearly every time - in Safari it just won't load any Flash content and the activity window gives an error, and in Chrome it pops up a "Flash has crashed" warning.
I made a new user account, and Flash works perfectly well in all browsers under that login (and the guest login). This leads me to believe it must be a broken file in my user Library, but I can't figure out which one it would be.
I don't imagine this to be related to my new logic board, but I thought I'd mention that anyway. I also updated Safari to 5.1.1, which is more likely to be a cause?
I'm running OS 10.6.8, Macbook Pro 2.53ghz. Browsers are Chrome 14.0.835.202, Safari 5.1.1, Firefox 5.0.1. Flash plugin version 11.0.1.152.
I've uninstalled Flash, repaired preferences, reinstalled Flash, re-repared preferences, rebooted, all of those standard tricks, no dice.
Any support would be appreciated, I'd rather not have to migrate everything over to a new user account!

I have exactly the same problem that you have with my Mac Pro (10.7.2). At first there was only one site that was broken (I didn't pay any attention to that then), now I have found 3 different sites and sometimes problems e.g. in Youtube and other similar sites.
The broken ones are NHL Vault, Soundcloud music-plugin and RAY (browser poker client). Many other sites works just fine.
I suspect some kind of write issue to some of the flash storage/temp/cache folders but cannot resolve any further.
UPDATE: Wow, now it works! I did the above mentioned Flush-trick (manually deleted .sol files and their parent folders) and also deleted everything inside path: user/Library/Preferences/Macromedia/Flash Player/#Security/FlashPlayerTrust/
Strange is that in any of those folder I didn't find any sign to Soundcloud and Ray, only NHL - and now all those are working.

Is there a way to bypass user login as its not being recognised

I have disabled automatic login and now I can't login as it does not like the username an or password, is there a way to bypass the user login, please help ASAP

http://osxdaily.com/2011/08/24/reset-mac-os-x-10-7-lion-password/

User Library Taglibs Not Detected

It seems that NitroX only detects jarred tag libraries if they are in the lib folder. I have, for instance, an Eclipse user library setup that includes the JSTL jar files. NitroX does not detect the JSTL taglibs, even though my deployed application works just fine. If, however, I copy the same jar files into the lib folder then suddenly NitroX detects them.
Is this a bug?
Thanks.

Sorry about the incomplete information.
We just released NitroX version 3.0 M1 (stable milestone build 463) which supports taglibs imported using "External JARs / Add Variable / Add (user) Library" method.
Use any of this method(s) to include the external taglib jar file(s) and then follow below steps:
- Close & reopen the project
Note: By default tag libraries imported from external location do not list in the Tag Libraries view
- The "Tag Libraries view" displays the respective tags that are defined using taglib definition
Ex: <%@ taglib uri="http://jakarta.apache.org/taglibs/datetime" prefix="dt" %>

User Login - go to previous URL not working

Hi
I have a user login set up using the DW server behaviour.
The problem I have is that the redirect to the previous url doesnt work and always directs a successful login to the default successful login page.
The problem seems to revolve around this part of the code:
                if (isset($_SESSION['PrevUrl']) && FALSE) {
                    $MM_redirectLoginSuccess = $_SESSION['PrevUrl'];
                header("Location: " . $MM_redirectLoginSuccess);
and in particular the use of the && FALSE check. I can see from my debugger that the value of $_SESSION['PrevUrl'] is properly set to the previous url. If I remove the && FALSE check the login works as I would expect and redirects to the previous URL. However, as this is 'out of the box' DW code I am concerned in case removing the && FALSE check may be doing some harm. I have to admit I dont understand the logic of what the && FALSE part of the IF statement is actually checking for.
Any advice and/or reassurance that by removing the && FALSE is not doing any harm or exposing me to any risks would be appreciated.
Thanks

session_start() is set
As I step through the code and watch the variables I can see that the value of $_SESSION['PrevUrl'] is equal to the previous url but $MM_redirectLoginSuccess remains as the default success page.
If I remove the && FALSE element from the IF statement, the value of MM_redirectLoginSuccess is changed to the the value of $_SESSION['PrevUrl'], which is what I want.
So my question is, what is the && FALSE bit doing and why is it there and do I need it?

Why is it when I select my personal preferences/user/login items, that when i select the check box for items to NOT pop up on my dock when i restart and start my macbook air 11 inch that they still continue to?

why is it that every time i start up my macbook air and when i restart it, that the new office with word and those three other apps constantly pop up? even though i went to personal preferences/users/login items, and selected the box that clearly says "items to NOT be brought up when logging in" ?

If you don't want to start Office automatically when your Mac starts, see > http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macword/how-do-i-prev ent-microsoft-office-2011-word-from/dd5b8b17-8397-4e7c-b635-79b9c976c4ab?msgId=f 00ac42a-e4fe-43aa-83d7-16ccd35a0d8a
Also, on System Preferences > Users & Groups > Login Items, select all items related to Office and press - button to delete them

After upgraded 9.2 DB, all users are not able to login (Except Guest).

After completed the DB upgrade from 8.1.7.4 to 9.2.0, all users are not able to login the oraclemypage.home. This is except the Guest account.For example, I use the sysadmin account to login the oraclemypage.home. It shows "Your login is invalid. Please login again."
Moreover, I do the following query.
SQL> select fnd_web_sec.validate_login('SYSADMIN','SYSADMIN') from
dual;
FND_WEB_SEC.VALIDATE_LOGIN('SYSADMIN','SYSADMIN')
N
If I guery the Guest account, the result is "Y".
Also, all users can access via dev60cgi/f60cgi to open E-business 11.5.7 application. Are there any missing script / process I need to do?
Thanks,
Matthew

Hi Arun,
What message u get on the apache logs / jserv logs when u get the error ?
Since the log cumulate a giga byte, I clean up the log and test again. It seems no error message.Whats your platform?
HP-UX 11.11To which version (5 digit) u upgraded DB ?
Oracle9i Enterprise Edition Release 9.2.0.6.0 - 64bit Production
I found a note 225074.1 that talks of a similar issue where users are ablt to login to forms but not php. this is for AIX. review the note.
I had checked this previously. Part of this document already tried which suggested by Oracle Support.what is the end_date for all of these users in fnd_user table ? if all users for some reason is end_dated , then fnd_web_sec will show 'N"
All users are normal. For those I tested without end_dated, I can access via f60cgi too.whats the session_cookie_domain set to in icx_parameters table? Set to NULL and try bouncing apache once.
This set to ".mycompany.com". You mean that I set the session_cookie_domain to NULL and restart Apache, right? Why I need to set it NULL?

When am trying to download acrobot standard its prompting with user login password and its not getting downloaded.

Hi
When am trying to download acrobot standard its prompting with user login password and its not getting downloaded.

When you (or someone) first switched on your computer, you (or someone) had to choose a password. This protects your computer, and you need it to install most software or change the system. We can't help you if you forget it, sorry.

User not able to login for the role

Hello All
We are having 2 properties for the role assigned to user in portal. One is the "Entry Point" and the second one is "Invisible in Navigation Areas". We have customized the standard TLN par for our application. Due to which if we are setting any of the above property to "Yes" then i am not able to login into that role. As we are checking the navigation nodes only in TLN par.
I need that role to be invisble in portal but user should be able to login into that role.
Kindly help as i need to implement it urgently.
Thanks & Regards
Mandeep

Hello Reddy,
I have provided the code we are using to fetch te roles from navigation nodes. Navigation nodes are fetched for only visible roles not for invisible roles. Kindly refer the code and suggest some solution to fetch the heirarchy of the invisible role. In the code "My Purchases" & "Mis Compras" is our role.
<nav:iterateInitialNavNodes currentNavNode="currNode">
                          <% String strCurrentNode = currNode.getTitle(myLoc);
                                    if (strCurrentNode.equalsIgnoreCase("My Purchases")|| strCurrentNode.equalsIgnoreCase("Mis Compras")){
                          %>
                          <%if(levels==2) { %>
                                                
                                                <nav:storeNavNode/>
                          <% } %>
                          <% } %>
                          </nav:iterateInitialNavNodes>
Regards
Mandeep

WM not detecting user login

Similar Messages

Maybe you are looking for