WM-PP losing storage unit number on return

Hello again,
This is not an uncommon problem I am sure!  My client has the SU number on the label.  We are using WM material staging to pull full SUs into the non SU managed production supply area (stype 100).  The required amount of product is consumed.  All this is okay. The next step is the problem.
When the material is returned to the SU-managed storage type, the system gives it a new SU number so the label is wrong.  Is there any way to keep the old the SU number? Is ABAP my only solution?
Thanks for your advice,
Orla

http://help.sap.com/erp2005_ehp_04/helpdata/EN/c6/f8461b4afa11d182b90000e829fbfe/frameset.htm
Define storage unit management for physical storage types only. Interim storage areas cannot be SU-managed.
What is your process exactly?
1) Is the SU moved to production (interim storage type 100) and they pick up the necessary quantity and SU goes back immedietly (very shrt time).
2) SU is moved to production (interim storage type 100) and it will be there till the parts are consumed for production (long time).
In case of 1) you can consider the use of picking with pick point:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/c6/f8471f4afa11d182b90000e829fbfe/frameset.htm
In case of 2) I think it's reasonable to reprint the lbels as it was suggested by Hein since who knows what's happned with the SU during that time it was in production area...
Otherwise you have to go to development I think.
Regards,
Csaba

Similar Messages

  • Storage unit number length

    Hello friends,
    I'm about to activating handling unit management for a newly cutsomized warehouse. hu numbers are 20 characters.
    except this new one, all other warehouses defined in the client are storage unit managed and storage unit number length was set to 10.
    so this is being a problem, when I packaged the stock in hu02. I need to change su number length from 10 to 20 but system says "this will cause serious result"..
    Is anybody experienced this before? what is the possible result? or what kind of problems happens in my warehouses?
    I d be glad if someone shares his/her ideas/experiences with me.
    thanx in advance.

    Hi,
    May I know if the question still exists or not? If so, please reply it. Thanks a lot.
    BR

  • Storage unit number

    Hello,
    I've activated storage unit management in my Warehouse, but i can't see storage unit number in the storage bin.
    I've customized number range for the warehouse:
    But i can't see it in the storage bin:
    Could you please advise, what else i have to customize?

    Hello,
    You absolutely right.
    I've made necessary cust. settings berofe posting goods receipt with storage units:
    Customizing storage units number ranges:
    And storage units customizing:
    And also in Material Master:
    But i don't see the storage unit type number in storage bin:

  • Exit to confirm transfer order with a storage unit number

    hi guys,
    I want to confirm transfer order with a storage unit number  from LT06 transaction, somebody know a user exit? .. actuallly i am using  MWMTO004 (EXIT_SAPLL03A_005)  but it doesn´t confirm the transfer order, How can i solve it? give me suggestions.
    Thanks in advance.
    Marisol.
    Edited by: Marisol on Apr 28, 2010 7:40 PM

    I solved  the problem myself.
    Thanks.

  • Automatic determination of storage unit number while putaway

    Hi all,
    In my system while creating TO either i require to enter SU number by viewing MMBE/LS26
    or Have to create the new storage Unit number (i.e. assighning the new number).
       Is here any provision to automatically determine new storage unit number & which setting its require.

    Number range once implemented then applicable to all storgae types. Please check SUT tick is active in storage type.
    Check all relevant things of SU .Previously there was on thread on this subject in forum. Please check the same.
    Regards,
    Prashant

  • Can i print Storage Unit number as barcode in SAP??

    can i print Storage Unit number as barcode in SAP and also Scan the same number in RF devices.

    Hello,
    yes you can, the solution depends on which printer do you have, if you want to print on laser or label printer.
    Please explain your requirement in more details
    Christophe

  • Check-digited Storage Unit number

    I have a client who wants to start using a check digited storage unit number.  Does SAP support such an option and if so, where can I find details on how it works?

    I have a client who wants to start using a check digited storage unit number.  Does SAP support such an option and if so, where can I find details on how it works?

  • Set storage unit number (SU)

    Dear all,
    I have a business scenario that barcode label is printed before goods receipt from production.  The phyiscal cartons from production will be placed onto the pallet.  Once the pallet label is full, the barcode code label is printed and scanned for confirmation of process order, and then following by goods receipt.
    Since, I am using WM in particular Decentralized WMS, the system will generated TO automatically upon GR.  As you know, storage unit number will be generated during TO creation.  As we want to capture the barcode pallet label in the SAP system as our SU number.  I wonder there is any user exits or other things that allow for setting the SU number from the barcode label number.
    Ideas?
    Thanks in advance.
    Cheers.
    Tom

    Hi,
    May I know if the question still exists or not? If so, please reply it. Thanks a lot.
    BR

  • Destination storage unit number on LT03

    Hi friends,
    When we create a transfer order, we need to fill "Destination storage unit number" (LTAP-NLENR), with a value from delivery (we manage the "Destination storage unit number" with external number range).
    Have you any information how to do this?
    Please help me
    Thanks & Regards
    Alessandro

    I had the following response from SAP Service:
    Unfortunately, the documentation of Enhancement MWMTO01 in SMOD clearly
    says:
    The user exit in the program is function module EXIT_SAPLL03T_001. In
    order to be able to use the user exit, you must create Include ZXLTOU01
    and activate the enhancement with transaction CMOD. As parameters, you
    can use the TO header (import parameter I_LTAK_VB) and the items (table
    parameter T_LTAP_VB). All database changes due to the transfer order
    have already been performed. The transfer order is created.
    With this user exit, you can update your own tables or trigger follow-upactions. Although changes made to table T_LTAP_VB do not have any
    effect, they should still not be made.
    Customer enhancement MWMTO003 is available for customer-specific stock
    placement strategies though you should check carefully whether it meets
    your exact needs. The enhancement is documented in transaction SMOD.
    This could be used to determine specific SUs into which addition to
    stock should take place but if you want to assign NEW SU numbers during
    putaway then this is not possible in the standard.
    Sorry I cannot provide you with a better answer. However I hope the
    above information is useful to you. If you have no further queries,
    kindly confirm the message at your earliest convenience.

  • Same Storage Unit number for both source & destination storage bin

    Hi, I have a requirement to have same Storage Unit number for both source & destination storage bin in transfer order screen.. can any1 suggest how to do it?
    An early response is very much appreaciated

    Hello,
    You absolutely right.
    I've made necessary cust. settings berofe posting goods receipt with storage units:
    Customizing storage units number ranges:
    And storage units customizing:
    And also in Material Master:
    But i don't see the storage unit type number in storage bin:

  • Warehouse storage unit number by userexit

    Hi
    The requiremnet is to get the storage unit number from the user exit not from the internalnumber range set in configuarion. The function module used here is CONVERSION_EXIT_LENUM_OUTPUT.And we set the the value  3 in sunmber conversion(omnn transaction).Hope if we set the value to 3 then it will call the function module and the number we set in the userexit will trigger.
    Now we are getting the number as mentioned in the userexit in transaction LT01. But it gives the number in display mode(lt21) also and gets appearing in the past transferorders in the table.If any prerequistion required the please let us know.
    Anybodyhave the experience in this please helpus.
    Thanks in advance.
    Regards
    Maharajan

    Hi,
    Try LS11 might help you.
    Regards,
    Ninad Kshirsagar

  • RE: Storage Unit Number

    Hi,
    Can the storage unit number be configured to accpet external format?
    My user wanted to key in the carton number when placing it onto the pallet.
    It is meant to keep all slow moving item into a single carton for storage.
    Thanks
    Bye

    Colin,
    Please have a look at OSS note no. 14881: You neither need an external number range nor a user exit.
    Best regards,
    Christiane

  • WM-storage unit number issue

    Hi
      Storage unit number is not generate in the transfer order .i made configuration for storage unit. But storage unit number is not    
      trigger in transfer order.
    pls send me steps for configuratioin. ihave to check where i missed the configuration steps
    with regards
    dinesh
    Edited by: code acess on Aug 18, 2011 5:25 AM

    Hi ,
    follow the below Process to Activate SU
    First make your warehouse SUM active. Set your individual st types as SUM active and SUT check active
    Active SUM for the storage types where material is to be putaway as well as removal, Storage unit configuration in LE -WM-Storage units- for master data. Maintain these storage types in storage type search to find the bins for putway & picking.
    When you post GR in IM and the System will create the Transfer requirement .
    Using The TR to converting into TO creating to the destination Storage unit bin.

  • RE: Storage Unit number be Optional

    If Storage unit number is to be made for a particular storage type, can it be an optional entry?
    Bye

    Colin,
    If you have activated SU management for a storage type then entering a SU number (or generating one) is mandatory for any Transfer Orders placing stock in this storage type.
    For any other storage type where SU management is not active, you cannot enter SU number at all.
    Regards
    Baseer

  • Storage unit number in RF

    Hi all, I`m using the cycle counting transactions from the std RF functionality. I was wondering if ther is any way to have the system automatically determine the storage unit number that is in the storage bin. Since I am handling fixed bins for packing, once that the stock enters to this bin, we open the pallet and lose the pallet label. This will make very hard for the operator to enter the storage unit number when it is asked in transaction LM58, LM60, etc..
    Thanks in advance!
    Marcos

    Hi,
    Check the data in the Transfer Order, the item (such as the quant number, storage bin or storage type) does not belong to the storage unit number that you entered.
    For more check the link:
    http://help.sap.com/saphelp_45B/helpdata/en/c6/f83e194afa11d182b90000e829fbfe/content.htm
    Regards,
    Biju K

Maybe you are looking for

  • IMac external display not recognised although previously it was recognised.

    I have been using a secondary display for several months without problems. Now the iMac refuses to recognize it's existence. The secondary display gives message 'No Input Signal' Any ideas as to what has gone wrong?

  • Is the iPod touch 4g supposed to remember playback positions reached in iTunes?

    Mine doesn't. Playback position appears to be one-way - iPod to iTunes. I've stopped listening to large files (long podcasts, audiobooks) in iTunes because I have to manually return to the same position after my iPod is disconnected from iTunes. My o

  • Multiple Versions in Same Project File?

    Is there a way -- official or otherwise -- to accomplish this in GarageBand? To have different versions of a GB project, all of which draw from the same batch of .aif files as their source material, all saved into a single .band package file? My spec

  • Microsoft has added a community for Office for Mac at MS Answers

    Not entirely related, just a heads up for Office for Mac users: Microsoft Answers now has an official Office for Mac community to ask questions at: http://answers.microsoft.com/en-us/mac

  • Compiler Issue

    Hi, I have a tool which was developer in Excel 2007 and MACRO's. Few of my user's not able to launch the tool properly. Whenever they launch their are getting "Unexpercted Error" In Excel 2010. And If they launch in Excel 2007 their getting "Automati