WM -Purchase order and configuration steps

HI Gurus,
             kindly help me to configure the ware house management to create the purchse order and i want to move the
            raw material to production order..i have the confusion, what i maintain in the WM-ACTIVITIES -MOVEMENT TYPE
           pls help me to do the configuration
with regards
dinesh

warehouse managment does not create purchase orders.
you create your POs like you do it without WM.
WM is a sublevel to a storage location.
If WM is activated and you post a receipt to a PO to this storage location, at the same time a quant is created in interim storage type 902 along with a transport request to putaway that wuant into its final bin in the warehouse.

Similar Messages

Purchase order and Account assignement category- Change

hi.,
We are trying to receive the Purchase order of High value components into INVENTORY.
However, most of these Purchase Orders were created with account assignments.
Because of that, if we receives these POs, they will be consumed against the object identified in the account assignment.
Additionally, some of these have been invoiced already and would need to be backed out from the finance side.
Question: How can we receive these STO Purchase orders and then make changes through Movement type ( or any other way ) so that the HIgh Value Components that are consumed against that AC assignment can be subsequently moved into Invenotory.
Also, what are the other options ( FI will not open Previous period) so that the PO's which have been invoiced can be reversed against that AC assignment.
Thanks All

hi Rajesh.,
As mentioned earlier, these Purchase orders are STO's which have been already created and we are waiting to do the GR for the same. Items in the STO PO are of High value which we need to bring into INVENTORY.
But, because these STO PO's were created with account assignments, if we do GR now, they will be consumed against the object identified in the account assignment.
Some of these STO PO's have been invoiced already and FI has indicated that they could cancel the invoices for those STO PO's in previous posting period.
Question again : How can we receive these STO Purchase orders and then make changes through Movement type ( or any other way ) so that the HIgh Value Components that are consumed against that AC assignment can be subsequently moved into Inventory and not to a cost Center (202)
Step (1) Can we cancel the Invoiced items> reverse the GR for invoiced Items>reverse STO for PO ?
Step (2) Can we reverse the STO for PO for which GR has not been done? then
Step (3) Change the PO through ME22N, remove the Account assignment category?
Or how do we correct this situation for
(1) PO's already invoiced.
(2) PO for which GR has not been made. How can we receive them into Stock and not Cost center.
Anticipating a reply
Thanks
Sri

Purchase orders and their open order quantity with their due dates.

hi friends
i need to build a query where i can see the purchase orders and their open order quantity and their respective due delivery dates.i have never done this.
ME2M serves my requirement upto little but i cannot see the delivery dates in that report.
please help mein finding the steps involved in building the query.
Thanks
Alahari

Use the table EKPO and EKKO
adhoc querry is a tool in which we can create report
to get report we have to use three t. codes
1.sq03-->is for to create user group
2.sq02--.is for infoset Querry
3.Sq01-->for exact querry
try with these codes or revert with ur response
follow the link for query creation
First check this link,
SAP Query Creation
SAP Query -A Reporting Tool for Functional Consultants(Part 2)
SAP Query 1
SAP Query -A Reporting Tool for Functional Consultants (Part 1)
Always after going to SQ02 or SQ01 T Code ,first click on Environment in the menu ->Query Areas-->
Standard Area Client specific and then start creating the Infoset or else the query.
Still if you are not satisfied means,please revert back.

Purchase orders and their open order quantity with their due delivery date

hi friends
i need to build a query where i can see the purchase orders and their open order quantity and their respective due delivery dates.i have never done this.
ME2M serves my requirement upto little but i cannot see the delivery dates in that report.
please help mein finding the steps involved in building the query.
Thanks
Alahari

Deliver date is available in table EKET field EINDT.
Use table : EKKO ,EKPO, EKET.

Purchase Requisitions, Purchase Orders and Receipts

Hello all,
The following is the sequence for Purchasing
Purchase Requision -> Purchase Orders -> Receipts
However I have a requirement to bring in the related Purchase requisions,purchase orders and receipts from 11i into R12 instance.I can do that using the open interfaces.However How do i link these 3 objects together?
I intend to import the purchase orders first and then import its related purchase requistions and the receipts...In doing so how do i link them together.How do i know that this purchase order was created from this Purchase requistion or this receipt is meant for this purchase order? What is the joiing columns in the base/open interface tables?
Thanks
AJM

Hi Venkat
1. To perform ATP do we need all the issues(Sales Orders, Deliveries) and receipts(Purchase Requisitions, Planned Orders) in APO?
Yes you need all the mentioned elements above in APO to do ATP check. Again, you can also extend the scope of the check to further more receipts and issues. All depends on your configuration of scope of check.
3. I guess in Apo the planned order and process order is a single elment. Is that Correct?
Yes, technically a planned order can be a planned process order or a planned production order.
regards
Mohan Chunchu

No Purchase order and sales order from trading contact

Hi Gurus,
I am new to this module and i am trying to create a Trading contract. As I understand that the trading contract should create Purchase order and Sales order automatically. But in my case, this didn't happen.
In this regard, I want to know,
i. Are info records mandatory or mentioning the required purchasing and sales data during contract creation is sufficient.
ii. What are the configurations required to do for GTM functionality and which are the points should I check for this.
help me out.

HI
there are some status that is required to be set while you save a trading contract.
your trading contract must be approved or released..only then follow-on docs will be created.
regards,
Yadesh

Open Purchase Orders and Open Sales Orders

Hi,
Please let me know the table names for open purchase orders and sales orders.
Regards,
Prii

HI Priti,
EKPO-ELIKZ "Delivery completed" indicator, This tell if the given PO line items has any open quantity or not.
Logic to find out if a given PO has Open Quantity or not is do the following:
    " select the PO Qunatity.
    SELECT SINGLE MENGE FROM EKPO INTO PO_QTY WHERE
    EBELN = ITAB_PO_LN-EBELN AND
    EBELP = ITAB_PO_LN-EBELP.
    " select the GR qunatity which has been received.
    SELECT SUM( MENGE ) FROM EKBE INTO GR_QTY WHERE
    EBELN = ITAB_PO_LN-EBELN AND
    EBELP = ITAB_PO_LN-EBELP AND
    BWART = '101'.
    " select GR Quantity which has been reversed.
    SELECT SUM( MENGE ) FROM EKBE INTO GR_REV_QTY WHERE
    EBELN = ITAB_PO_LN-EBELN AND
    EBELP = ITAB_PO_LN-EBELP AND
    BWART = '102'.
    POSTED_QTY =   GR_QTY - GR_REV_QTY .
    OPEN_QTY = PO_QTY - POSTED_QTY.
Regards,
-Venkat.

Email of Purchase Order and Payment Advice

Good Morning All
We wish to implement the emailing of payment advice documents to our vendors. However, we are not sure if the changes to the vendor master data required for this will also mean that purchase orders for that vendor will also be emailed. Does anyone know if this is the case or not?

Having done some testing I agree that the requirement for condition data for purchase order output makes it possible to email remittances and not purchase orders i.e. by not creating the MN04 condition data. However, in my testing, when I assigned an email address to the vendor for the purposes of emailing purchase orders, the payment advice produced by the next payment run was also emailed. I'm sure I must be missing something as, if nothing else, this would imply that the vendor would offer the same email address for both purposes. In desperation we are wondering whether we need to maintain multiple email addresses and use the standard number for purchase orders and somehow identify one of the other addresses as that to be used for the remittance.

Want to see combination of Purchase Order and A/P report at material level

Hello,
Anyone familiar with an InfoProvider that will show a combination of Purchase Order and A/P data combined?
I'm specifically looking for a source that includes the PO information at the Vendor / Material level with order value and quantity at the time the PO was created AND accounts payable data at the Vendor / Material level with the invoiced amount and quantity (which may vary for the PO amounts).
Thank you,
Jim

Hi
Have you seen all of the follwoing datasources......
http://help.sap.com/saphelp_nw04/helpdata/en/df/fbb0d62f3a794d98d23609d17e1610/frameset.htm
Hope this helps
Regards
N Ganesh

Last Purchase Order and FI-Document Number of an Vendor

Hi,
i need for an Vendor the last purchase Order and FI-Document Number.
For purchase Order i read EKKO sort this and get the last one.
For FI-Document Number i read BSIK and BSAK sort this and get last one.
Question: is there any faster way (CLASS, FM or TABLE) to get what i need??
Thanks.
Regards, Dieter

HI Dieter,
You can use transaction code ME2L , where you can list of PO issued a particular vendor. List list shows Po no. indecending order. You can double click select the latest PO and through PO history you can get the FI Document no.
I hope this ansers you query.
Regards
Harish

Purchase Order and Purchase Request

Hi Gurus,
do you know how can I get a Purchase Request Number for an item in Purchase Order?
I cannot find it in any BI Content Data Source...
Regards,
Dorota

In R/3 tr: /nme23n- display purchase order
It will show the last Purchase Order that you displayed.
On the Purchase order on the top left corner, click on purchase order, and click "other purchase order".
the pop up asks you to enter either purchase order or purchase order number
enter the purchase request number for which you want to see the purchase order and hit ok and vice versa..
go to status tab and double click on purchase order
you will get the corrsponding purchase order for the purchase request..
and if you chose purchase order on the pop up you can get the purchase request number
For the data source:
2lis_02_itm, 2lis_02_scl
http://help.sap.com/saphelp_sm32/helpdata/en/8d/bc383fe58d5900e10000000a114084/content.htm
Both of them together can address your requirement.

Purchase order and service entry sheet

Hi
Is there a way to prohibit modifications on the position of services purchase order when the service entry sheet and the invoice were already entered for that position?
Thanks in advance for your help
Tomas

hi, thanks for your help, but the problem that i have is when the service entry sheet and the invoice are allready entered, the user change the value of the position and the service tab, so the user can enter services for more amounts. So its produce difference on the purchase order history between the values of LERF (WE) and the value of the purchase position. For example
Service Purchase order for 100 dollars.
Tab service: 2 units for 50 dollars
The user enter one service entry sheet for 50 and the invoice for 50 (lerf and WE= 50)
Then the user change the position of the purchase order and increase the value to 100 and modifies the service tab to 1 services for 100.
Then he enter one service for 100 and the corresponding invoice..........so the result is the following:
Service purchase position: 100
LERF-WE: 150
so the purchase order history is inconsistence.
For that reason i whant to know is there is a wat to prohibit modifications on the position of purchase order
Thanks in advnace for your help
Enzo

Purchase order and goods receipt

Hello to everyone,
is there any way to view only the last purchase order and the last goods receipt for several materials?
Regards

Last PO Number for Several materials can be viewed using T code ME2M & Last GRN Number for Several materials can be viewed using T code MB51.
Regards
Bhavesh Mistry

Purchase Order and Invoice creation

Hi All,
I am having some fields related to Purchase order and Invoice creation, i have to find out the tables to which tables these fields belongs to.
Below are the Header fields:
Wrbtr Tcode - MIRO,
Lfsnr   Tcode - MIGO,
Evertn Tcode - Me32k,
Kbetr Tcode - Me32k,
Kschl Tcode - Mek1,
Selkz Tcode - Mek1,
Werks Tcode - Mek1,
Evart   Tcode - Me31k,
Frgco Tcode - Me35k,
Sddat Tcode - Me35k,
Below are the Detail fields:
Kbetr   Tcode - Mek1,
Konwa Tcode - Mek1,
Lgobe Tcode - Me21n,
Planloc Tcode - Me31k,
Datab   Tcode - Mek1,
Datbi    Tcode - Mek1,
Fromdate Tcode - Me31k,
Todate      Tcode - Me31k,
i have to retrive all these fields from tables, so plz anybody give me exact tables to use in the select quries to retrive these fields.
Thanks in advance,
Balu.

Hi,
U can get the req fields as follows:
Below are the Header fields:
1)Wrbtr Tcode - MIRO- table rseg ,field-wrbtr
give belnr (invoice no ) & BUZEI(item) if known, else, give ebeln,ebelp.
2)Lfsnr Tcode - MIGO,-table mkpf,give mblnr (mat doc no ) & ZEILE(item) field-xblnr or give ebeln,ebelp
3)Kbetr Tcode - Me32k,
table:konp or konv.
Pass ebeln to ekko, wil get KNUMV.Pass KNUMV as KNUMH in 1 of the tables- konp or konv,wil get kbetr.
4)Kschl Tcode - Mek1,
Pass ebeln,ebelp to table ekpo, get mwskx(taxcode), u will get condition type kschl from FM -FI_TAX_GET_CONDITION_TYPES.
or
table:konh or konp or konv.
Pass ebeln to ekko, wil get KNUMV.Pass KNUMV   as KNUMH in 1 of the tables-konh or konp or konv, wil get kschl.
5)Werks Tcode - Mek1,-table-ekpo, field-werks(give ebeln,ebelp)
Below are the Detail fields:
1)Kbetr Tcode - Mek1,
Pass ebeln to ekko, wil get KNUMV.Pass KNUMV as KNUMH in 1 of the tables- konp or konv,wil get kbetr.
2)Konwa Tcode - Mek1,
Pass ebeln to ekko, wil get KNUMV.Pass KNUMV as KNUMH in 1 of the tables- konp or konv,wil get konwa.
3)Lgobe Tcode - Me21n,give ebeln.ebelp in table ekpo, get lgort.pass lgort to table t001l, u wil get lgobe.
4)Datab Tcode - Mek1,table-konh,field datab
Pass ebeln to ekko, wil get KNUMV.Pass KNUMV as KNUMH in - konh ,wil get datab.
5)Datbi Tcode - Mek1,table-konh,field databi
Pass ebeln to ekko, wil get KNUMV.Pass KNUMV as KNUMH in table- konh,wil get databi.
Hope its useful to u.

Purchase order and rfq smartforms issues

Anyone please let me know the issues faced with purchase order and rfq smartforms

Problems I had is changed line items to print a changed PO/RFQ wich will print what was changed with each line.
Can't remember the solution in total. If you search on the FM ME_READ_CHANGES_EINKBELEG in the main program of the SAP standard and setup a default PO to print using the standard program and form medruck you can debug it.
There is a change flag when printing the form, field - NAST-AENDE.
Else the form is very much streight forward.
Regards,
Marius

WM -Purchase order and configuration steps

Similar Messages

Maybe you are looking for