WM-QM interface - Put away the inspection sample

Dearm WM-QM experts
My question is: How can we automate the creation of a TR/TO from the sampling storage type to the final bin after entering a usage decision. The system creates a TR/TO to move the quality stock from storage type 902 to 917, but after UD the system doesn't create a TR/TO to move the stock from 917 to the final storage type/bin (say 001).
The below are the details and configs for the issue:
I have a materials that is flagged for inspection (say 100% sample).
I created the QM-WM interface control "Q" with storage type = 917, bin = "QUALITY" and sample handling = 1 using the following config menu path:
Logistics: Execution -> Warehouse Management -> Interfaces -> Define Quality Management -> Define Inspection Sample Control
I assigned the above interface control "Q" to my warehouse with operation = E and stock category = Q using the following config menue path:
Logistics Execution -> Warehouse Management -> Interfaces -> Define Quality Management -> Activate QM Interim Storage Type Search
When posting the GR (mvt = 101 and qty = 10 as an example), the system create a TR or a TO to move the stock from storage type 902 to 917 as Q (the entire 10 pieces are selected).
When entering a usage decision for the relevant inspection lot, the system creates a posting change notice (which I can automate to a TO) to remove the "Q" on the stock in storage type 917.
However, I need to move the quality sample (which is the entire 10 pc) from 917 to the final bin (in storage type 001). Strange is that the system doesn't propose any TR for that movement. Am I missing a config or that final TR/TO has to be created manually?

Dear YorkD,
The PCN that was created from the approved UD contains 2 line items:
Line 1: move the stock with Q indicator from 917 to 922
Line 2: move the stock without the Q from 922 to 917
Eventually, this PCN will remove the Q indicator from the stock in 917 (which is correct as the UD was approved), but it will not propose a transfer of the stock to the final bin (depending on the setup of the material master and put away strategies).
So, unless I've missed something, the PCN doesn't help.
Regards,
Hani

Similar Messages

Cost settlement & yield against the inspection Sample....

Hi there,
I gotta a query related to the cost settlement against the sample drawn for inspection.
Suppose that as per the sample drawing procedure configured for the material for 1000 bars let 1 bars is to be used for the inspection .
Now if that bar cannot be used further then how the cost is settled against the Production order for the inspected bar as during the order confirmation the value entered will be 1000 bars only & bar is consumed in QC...
Second thing is that if the requirement is of 1000 bars then the actual yield is
999 bars..... how the variance is taken care of so that there is no shortage of the material ...........
Thanks
Kaushik

HI,
in the PM order check the settlement parameters. In the allocation structure assigned to the PM order are "assignments" defined. Each assignments contain a "source" (=a number of cost elements) and a "settlement cost element" used for settlement document. Its also possible to settle primary cost element based (means without changing the original cost element during settlement).
best regards, Christian

Pallet Wise Put Away

Hi Experts,
I am new to warehouse management, I have a scenario. Suppose we receipt material code xxx Qty 3300 Nos. One Pallet Qty 500 Nos. We can place one pallat in one bin only. Now we have to place this material in 7 pallets, 500 nos = 1 pallet in 6 bins and rest 300 nos in 7th bin.
Please help me how to configure in system / spro.
Thanks and Regards
Ishu

Hi
In the WM2 view in the material master in the palletization data you need to say that 500 of yopur base unit of measure i.e. EA = your Storage unit type
Example
500 EA S1
When you do a GR the syatem will calculate that 3300 = 5 X 600 and 1 X 300
Depending on yor put away strategy the system will then put away the pallets in to individual bins
I hope that this helps
Frenchy

I had a prepaid card added to my i tunes and now the game is asking to be updated and before i can update i need to put in the prepaid card information but i threw the card away there was no more money on it what do i do?

I had a prepaid card added to my i tunes and now the game is asking to be updated and before i can update i need to put in the prepaid card information but i threw the card away there was no more money on it what do i do?

I just found another address book entry that was repeated 2473 times!!! This is a just a little ridiculous, don't you think? And why that one? Most are ok but ....

I've had my iMac put away for about a year, now I can not remember the admin password upon startup. And I don't have the installation cd's (of course)! Is there any way to re-boot, re-do, get into my Mac to change it. I don't remember it even w/ the hint

I've had my iMac put away for about a year, now I can not remember the admin password upon startup. And I don't have the installation cd's (of course)! Is there any way to re-boot, re-do, get into my Mac to change it. I don't remember it even w/ the hint

Call Apple with the Serial and they will send you the ones that came with the Mac. Or search the Net.

Inspection Characteristic is not being displayed in the inspection lot

I have created a Calibration order by first creating method, then a MIC, same is attached to a task list and then a Plan.
But when i trigger a order for that task list the inspection characteristics as mentioned in the task list does not appear in the order.
Please let me know how to get the inspection characteristics in the order.
I have checked the task list, in that the Inspection characteristics is visible.
Please help
Praneet

I have noted one thing, in inspection lot the sample size is shown as zero for the equipment where the inspection characteristic is not being displayed and it is shown as one for the lot where the inspection characteristic is displayed.
Both the Inspection lot the task list is same
Please reply

TS1292 I have recently received an iTunes card and after scraping away the panel to get my code the first part of the code is unreadable how do I go about getting a code for the card

Hi there I have recently been given an iTunes card as a present.i went to use it today to put credit on my account and after scraping away the panel found that I couldn't read part of the code that was on the card how do I go about getting the card activated?

If the page that you postted from doesn't help then you will need to try contacting iTunes support (you will need to give them as much of the serial number and activation code from the card as you can read) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes

How to change the Status CRTD of the Inspection Lot?

Dear all.
I want to Complete an Inspection Lot 10000000005 In the T-CODE qvm2.When I select the Inspection Lot 10000000005 and press F8 to Complete the Inspection,the SAP show an error message "Status check error".
And the detail info show that the error was cause by the Status CRTD of the Inspection Lot.I check the Status of the Inspection Lot 10000000005 and found that it's Status was CRTD CHCR SPRQ.My question was how to change the Status CRTD of the Inspection Lot?
Regard
Yoda

Hi
CRTD means ...
In material master QM vew-inspection setup->Inspect with task list tick is there.
Now to change status,
Go to Qp01>create a task list for material(If not exists)>remember date of creation of task list must be prior to date to creation of inspec lot
If task list is created/exists>go to QA02.<inspection specification -->click on Inspec Spec
and attach task list
go to sample tab....click on sample.
Now save it.
Status will change to REL
Regards
Sujit

Using the FilenameFilter interface to get the extension of a file

Hello...
I am trying to write a java program which is going to parse multiple xml documents and load them into the db. In a directory, there could be files other than xml files. Hence, i want to parse only files which have an .xml extension. I am using the FilenameFilter interface to get the extension of the files in a particular directory. However i am getting confused with the way it shd work...i am attaching herewith the code ...pl help me. I would appreciate if u could send me some sample code.
/* Author : Jayashree */
import com.xhive.XhiveDriverFactory;
import com.xhive.error.XhiveException;
import com.xhive.core.interfaces.XhiveTransactionIf;
import com.xhive.dom.interfaces.XhiveDocumentIf;
import com.xhive.core.interfaces.XhiveDatabaseIf;
import com.xhive.core.interfaces.XhiveConnectionIf;
import com.xhive.dom.interfaces.XhiveLibraryIf;
import org.w3c.dom.Document;
import java.io.*;
public class MultiXML
public static void main(String args[])
try
String administratorName = "Administrator";
String administratorPassword = "secret";
String DBName = "FirstDB";
XhiveConnectionIf fConnection = XhiveDriverFactory.getDriver().getConnection();
System.out.println("Got the connection");
fConnection.connect(administratorName,administratorPassword,DBName);
System.out.println("Connected");
XhiveTransactionIf fTrans = fConnection.createTransaction();
System.out.println("Transaction");
fTrans.begin();
System.out.println("Transaction begun");
XhiveDatabaseIf fDBase = fTrans.getDatabase();
String DBName1 = fDBase.getName();
System.out.println(DBName1);
XhiveLibraryIf rootLibrary = fDBase.getRoot();
System.out.println("Got the root");
File fDir = new File("e:/xhive");
File[] files = fDir.listFiles(new FileFilter("xml"));
int i = 0;
while ((i < files.length))
Document fDoc = null;
System.out.println("Document Initialized");
try
fDoc = rootLibrary.parseDocument(new File(files[i]+".xml").toURL(), XhiveLibraryIf.PARSER_NO_VALIDATION);
rootLibrary.appendChild(fDoc);
System.out.println("Appended");
catch (Exception e)
e.printStackTrace();
i++;
fTrans.commit();
System.out.println("Committed");
fTrans.terminate();
System.out.println("Terminated");
fConnection.close();
System.out.println("Connection Closed");
catch(Exception e)
System.out.println(e.getMessage());
In the above code, I am trying to list all those files which have the filter as .xml. I am unable to understand what code i need to write in the accept method of the FilenameFilter interface which accepts the directory name and the file name. There could be a directory which consists of multiple xml files too..this is where i am finding a problem
Regards,
Jayashree

This sample code uses an inner anonymous FilenameFilter that takes all readable files with a ".xml" extension.
File[] fileList = dir.listFiles (new FilenameFilter () {
    public boolean accept (File dir, String name) {
        if (!name.trim().endsWith (".xml"))
            return false;
        File f = new File (dir, name);
        if (!f.isFile())
            return false;
        if (!f.canRead())
            return false;
        return true;
});Please post any question if you don't understand.
Matthieu

Edirectory ldap, what do I put in the DN String field?

Experts,
I am trying to configure LDAP authentication. I've done this many, many times against Active Directory. In AD it is usually DOMAIN_NAME\%LDAP_USER%.
This has been driving me nuts today. We are running eDirectory. I have my server's IP address and port.
What do I put in the DN String field? I've tried many combinations of TREENAME\%LDAP_USER%, nothing seems to work.
If it is more complicated than that, where do I look in NDS to figure out what I need to put in the DN String field?
Thanks!
Dan

Dan,
I'm actually surprised you had success with that on AD as I never did. I recommend you get a little lower level and use DBMS_LDAP. Here's a little sample code to get you started:
   FUNCTION ldap_authenticate (
      p_username IN VARCHAR2
    , p_password IN VARCHAR2
      RETURN BOOLEAN
   AS
      l_dn      VARCHAR2(256) := p_username || '@domain.com';
      l_bind    PLS_INTEGER;
      l_session DBMS_LDAP.SESSION;
   BEGIN
      IF p_username IS NULL
      THEN
         RAISE_APPLICATION_ERROR(-20001,'A username must be supplied');
      END IF;
      IF p_password IS NULL
      THEN
         RAISE_APPLICATION_ERROR(-20002,'A password must be supplied');
      END IF;
      dbms_ldap.use_exception := TRUE;
      l_session := dbms_ldap.init(
         hostname => 'server.domain.com'
       , portnum   => 389
      l_bind := dbms_ldap.simple_bind_s(
         ld      => l_session
       , dn      => l_dn
       , passwd => p_password
      l_bind := dbms_ldap.unbind_s(l_session);
      RETURN TRUE;
EXCEPTION
   WHEN OTHERS
   THEN
      RETURN FALSE;
END;Regards,
Dan
http://danielmcghan.us
http://sourceforge.net/projects/tapigen

SMQ2 Error: Delivery has not yet been put away / picked (completely) in ECC

Hi All,
I am processing an Outbound Scenario..everything is fine until SMQ2 shows an error in ECC system. SMQ2 shows me the following error:
Delivery has not yet been put away / picked (completely)
Message no. VL609
My outbound delivery which was distributed to EWM system has overall picking status as blank (Not relevant for picking).
Our system is recently upgraded to EhP6, since then we are seeing this issue. Interestingly VL01NO (Delivery without reference to Order) works properly.
Other ECC-EWM integration settings are fine. Delivery Type and Item Category also look good.
I could not be able to find any OSS Note relevant to this situation.
Could you anyone help me.
Thanks
Mahesh.

Further what I see in this Outbound Scenario in EWM is when I am creating Outbound Delivery meant for EWM system with ref. to Sales Order, "Picking" tab shows EWM WHN but also shows Overall WM status as "Transfer Order Required" which is not correct.
If I remove Storage Location and re-enter then Over all WM status and Over all Picking status fields come as blank. But after all EWM processing, SMQ2 queue (FM: BAPI_OUTB_DELIVERY_CONFIRM_DEC) fails with error
Delivery has not yet been put away / picked (completely)
Message no. VL609.
Any thoughts?
Thanks
Mahesh

Delivery has not yet been put away / picked (completely)

Hello SDNers,
I have a Batch program that is calling VL02n for Delievry Picking ,Pcking & PGI....
This batch program runs in Background
For Some Delivery it is giving this Error Message "Delivery has not yet been put away / picked (completely)"
...But When i run the same program in foreground delivery got Processed Well.
CAN U PLS HELP ME
>Why this Happening
>In what scenarion we genearally get this message(we dnt have TO Confirm Step in our Process)
>even i Analyze the Program of VL02n ...This message is not there
From Where this message is comming
Thx in advance
PLS RPLY ASAP

After reading again through your messages, I understand that you are doing both PICK and PGI in single update BDC call to VL02N.
This is NOT correct way to do this, as this does not ensure that PICK values are committed first and then only PGI is attempted. We did face similar problems and have solved it by separating PICK and PGI in to two calls separated by COMMIT WORK AND WAIT.
I would suggest you to split your BDC into two calls. One which does only PICK and save and then followed by COMMIT WORK AND WAIT and then followed by another which does PGI and save. This should avoid the problem altogether.
Why it is not happening in foreground mode is it does not happen so quickly as in background. Even a split second can make a difference, that is why I would want you to split up both PICK and PGI update in two separate CALL TRANSACTION VL02N
I am not sure if it would help to know where the "Delivery has not yet been put away / picked (completely)" message is raised, as it is raised withing SAPs PGI routines, and it is mandatory that ONLY picked values are used for PGI.
I can only say that the message is given under id VL and no 609, it should be embedded somewhere in the PGI call, why don't you try to PGI without picking and put a watchpoint SY-MSGNO = 609

Backup Device not being "put away" properly.

I use a WD 1TB hard drive for my time machine backups. It's designed to sleep with and wake up with my mac. Now, whenever, I close the lid of my mac without ejecting the time machine drive, I always get an error message that "Data in the disk might be corrupted as the disk was not put away properly". What should I do to ensure that this message does not appear?
In Windows, I used to disable "Write Behind Cache" for that disk. Is there something like that here? I'm new to mac. Please help.

I would suggest you unmount the disk (drag it to the trash - no it won't be deleted!) before closing the lid.

Trigger on RCV_SHIPMENT_HEADERS while Receipt Updation in Put Away Report

Hi,
I am working on PUT Away Label Report :
The process is follows:
When receipt is saved , a trigger will fire on RCV_SHIPMENT_HEADERS and in trigger a package will be called which in turn will submit the report for the receipt that is newly created.
The problem here is trigger is working fine when new receipt is created,But when receipt is updated using ADD to receipt option or In case of Internal sales order.The trigger is not firing as trigger is fired for every new insertion.
I am not able to find any column to know that receipt is updated and to track the quantity that is receipted recently . Since RCV_SHIPMENT_LINES table will have the track of the Total receipted quantity till date.
I am attaching the script of Trigger i am using for insertion.Please suggest me how to approach in this scenario.
Trigger that is used for new receipt insertion:
AFTER INSERT
ON rcv_shipment_headers
FOR EACH ROW
DECLARE
PRAGMA AUTONOMOUS_TRANSACTION;
l_request_id1 NUMBER;
BEGIN
BEGIN
If :NEW.RECEIPT_NUM IS NOT NULL
Then
l_request_id1 :=
fnd_request.submit_request ('XXINV',
'MTUPUTAWAY',
NULL,
:NEW.RECEIPT_NUM,
:new.SHIP_TO_ORG_ID
commit;
End If;
END;
EXCEPTION
WHEN OTHERS
THEN
NULL;
END;
Thanks in advance,
Best Regards,
Mahesh

you should post this question in the ebusiness-forum..

Dynamic Interface Determination Using the same Business System

Folks...
Does anyone have any good ideas on how to build a scenario where the same business system is used, but the interface mapping needs to be dynamic? I have a single JMS sender and 40 different message types on one side, and 40 ABAP Proxies on the other. The two solutions I see are as follows:
1. Create 40 separate JMS Senders with 40 different sender agreements
2. Create 40 Business Services for the same ECC system and utilize XPath expressions to support conditionally selecting an interface mapping
Neither of these in my mind is a great solution, does anyone have any others?
Mahalo,
Jonathan

Hi, I came cross the same problem on my current project, now I have following solution:
Create a number of JMS sender adapters, they all connect to same queue, but each JMS sender adapter only pick up particular type of message based on one JMS message property value. The message provider will be responsible to set the property value when they send message into the queue.
In JMS sender adapter, Parameter Tab -> Advanced Tab ->check Set Adapter-Specific message Attributes ->check Specify Additional JMS Message Properties (Maxmum of 10) -> Add Property name, e.g. "MsgType"
->Processing Tab -> Input Value in "JMS Message Selector", e.g. MsgType='WorkOrder'
after above setup, this adapter will only pick up messages that with "MsgType" Property value "WorkOrder"
For each type of adapter, you will create a JMS sender adapter and repeat the steps above, just put on the different Property value.
This approach will have number of Integration Scenarios, hence will have number of Sender Agreement.
I have tested the approach and it works.
Liang

WM-QM interface - Put away the inspection sample

Similar Messages

Maybe you are looking for