WM quality Clear and Auto TO

Hello guys,
when we create the GRN, Inspection lot & TR will get generated.
After Quality clears the UD, in the background system generates the PCN and converts the same into TO. Upto here its perfect, and is working fine.
After 101 GR -
stock will move to 902(Q) (storage Bin Goods Area)
after 321 Quality Usage----
Stock will move from 902(Q) to 922 (Storage Bin Trans Area)
mean while system also creates a TR for transferring the material from 922 storage type to move to destination bin in the warehouse.. how to activate auto TO for this movement??
if i use this TR in LT04, manually without any problem/changing the storage type i can post the same - Means strategies are fine.
Regards
Shenoi.

Thanks All, my question is still unanswered..
my requirement is very clear
After GRN - stock will be in 902 Q
After Usage Decision stock will be moved from 902 Q to 922 - goods in trans area.
"After Usage decision stock should be available in destination BIN as per defined strategy moving from 922 - Trans area bin"
Just to add again, the TR number which is genrated out of GRN, will be still open in LB11.
when i check the TR number in LB03, i can see TO for the same, i am sure this TO has got generated frm PCN.
Edited by: Suresh Shenoy on Oct 12, 2010 7:56 PM

Similar Messages

I am using IDVD to make slide shows. The pictures are clear and of good quality. When I burn the slide show to a disk, the pictures are blurry and of poor quality. Is there a setting for quality of picture in burning a disk?

I am using IDVD to make slide shows. The pictures are clear and of high quality when viewed on my computer. When I burn the slide show to a disk, the pictures are blury and of poor quality. Is there a setting adjustment to correct this problem?

I would re-post in the iDVD forum. You are likely to get a faster answer there. Good luck.

I am using using IDVD to create slide shows. When viewed on my computer the pictures are clear and of high quality. When I burn the slide show to a disk and play it back, the pictures are blurry and of poor quality.

I am using IDVD to create slide shows. When viewed on my computer, the pictures are clear and of high quality. When I burn the slide show to a disk and play it back, the pictures are blury and of poor quality. Is there a setting that controls the quality of the burn and if there is, where do I find it? Thank you.

The Mac software - iPhoto, iMovie, and iDVD are not the best with the Ken Burns effect (zoom in/out effect), so you might want to minimize that effect; also, if your subjects are wearing stripes for instance, that will have an effect if you zoom. There is better software available for slideshows; however, I do not know of any that is free (and does a good job). I've used Photo to Movie for some time; it does a fine job even in HD, but you have to pay for it. I use iDVD extensively, but only to add a menu, theme, special effects, etc. and then to burn it.

Auto Quality Notification and Return Delivery Via Usage Decision

Hello Gurus
Need help !
I am using the Quality inspection with Material Specification.
Just an overview of my current system settings -
Inspection Type 101 for Purchased parts , My Inspection characteristics and Batch Charracteristics are linked .Batch classification is updated as a result of Usage Deceision
My Requirement -
If the Inspection lot is getting rejected , system should trigger the Quality notification and return delievery automatically .
Can someone pl help me with detailed steps for acheiving this...
Reqward points will be given immediatly for sharing thoughts
BR

Hi
Thanks for reply.
I think I missed some thing in my question
I understand that this is Standard Sap when you post the stock into Return Deilivery stock , it 'll do the movement type 122 and create the material docuement.
However My requiremnet is to get the Delivery Document number with the reference of which i can do the PGI .
I gone thru the SAP help and learnt that we can trigger the Quality notification automatically if we reject the inspection lot...But not confident "how" as never done before..that the reason i posted my query if someone has done this before..
OR
Any option to create Delivery Document when rejecting one Inspection Lot is UD..W/o Notification also will work for me..
So I am aiming to get Delivery Document not material document as our materials are WM managed...
Could some one put some light on this...
BR

Problems with .ARW files and auto toning

problems with .ARW files and auto toning
let me try to explain this because this has happened in past and never found a way to resolve but i lived with it
now that I have a Sony A7R the problem is more serious
Firstly i take pride it making the picture happen all in camera, i use DRO lvl 5 to get enough light, like when i'm shooting at dusk. DRO its like doing HDR but in a single file, it lightens the darks. in my camera i'm happy with results
but when I upload them to lightroom, they come out near black.
allow me to explain
lets say I import 100 images
i double check my preferences and everything is UNCHECKED when it comes to importing options, there is no auto toning, nothing.
as the images import i see a preview in the thumbnail which looks fine.
i double click on one to enlarge it, hence leave grid view.
for a brief 1 or 2 seconds, i see the full image in all its glory but than lightroom does something funny, it darkens the image
one by one as it inspects each image, if it was a DRO image it makes it too dark.
to make this clear, the image is perfect as it was in the beginning but after a few seconds lightroom for some reason thinks it needs to correct it.
how to prevent lightroom from doing this, i want the image exactly as it is, why must lightroom apply a correction>?
i think it has to do something with interpreting the raw file and lightroom applies its own algorithm.
but here is what i dont get.....before lightroom makes the change i'm able to witness the picture exactly as it was taken and want it unchanged..
now i have to tweak each file or find a profile for it which is added work.
any ideas how to prevent lightroom from ruining my images and just leave them as they were when first detected...
there are 2 phases...one is when it originally imports and they look fine
second is scanning each image and applying some kind of toning which darkens it too much.
thanks for the help

sorry thats the auto reply message from yahoo email.
i've disabled it now
thing is, there is no DRO jpg to download from the camera
its only ARW. so my understanding is when i use DRO setting, the camera makes changes to the ARW than lightroom somehow reads this from the ARW.
but then sadly reverts it to no DRO settings.
because i notice if i take normal picture in raw mode its dark but if i apply dro to it, it comes out brighter, yet when i d/l the image from camera to lightroom, which is an ARW - there are no jpgs. lightroom decides to mess it up
so in reality there is no point in using DRO because when i upload it lightroom removes it.
is there a way to tell lightroom to preserve the jpg preview as it first sees it.
its just lame, picture appears perfect...than lightroom does something, than bam, its ruined,.
what do i need to do to prevent lightroom from ruining the image? if it was good in the first place.

Basic questions about high-quality output and PDFs

I do volunteer work in a non-profit that interfaces with local county government. We've been discussing a project to produce an atlas-type information as a service to the residents. The maps would be rendered by the GIS software the county uses (ESRI's Arc suite). The question is what file format should we ask for given the high-quality print and plot output we have in mind and our desire to add some simple vector markup in some cases to the maps. The markup, when used, would be simple circles, rectangles, arrows or text.
Our idea is the do most of the printing and plotting ourselves (we'd use something like a local Kinkos). This allows is to control paper sizes. In addition, we might want to crop the map and upscale a bit so we need to be careful of data density (dpi). The question is what file format do we request from the county?
Obviously we can ask for PDFs but, as a novice with that output, I don't fully understand 1) its Tools capability (but I am learning about it) and 2) how to control data density.
Since I think its best to envision a PDF as a "box" for other data, is the quality of the output going to be determined by the data density of the object inside the PDF?
I know I may not be very clear so please help me get clear on the question if I haven't expressed it well here.
BTW, I know I can place a PDF into an AI object and then add the vector stuff if needed, but I don't know from a workflow perspective if that's the best way to assure hight quality output.
Thanks
Tom
P.S. We may end up with GIS viewing software as we move forward (ESRI has a grant program for non-profits). All this would mean would be we would be the ones making the decision about output format but the question on workflow would still remain.

4. Finally, with CDs burned this way through iTunes, does iTunes place some sort of DRM on the burned CDs? If so, what practical effect does that DRM have on my burned CD (how does it limit the functionality of the CD?
No, so no limits to functionality.

Would a 347 MB file be slow? Auto save and auto type turn off?

I am doing an art inventory and add jpegs of the art. I don't resize them they range from 750k to 3MB. I guess if it is slowing the program down i should? It currently is 267 rows by about 18 columns.
Thanks in advance.
Oh can I turn off auto save and auto type? That may help. How do I do that?

Done.
Enter Scrip Editor
paste the posted script
File > Save > as Script on the Desktop
Move the script to the folder :
Macintosh HD:Library:Scripts:Folder Action Scripts:
CAUTION, you will be asked to enter your pasword.
Create a folder to do the job. I named mine Normalized. I created mine on the Desktop where it's easy to reach.
Go to :
Macintosh HD:Library:Scripts:Folder Actions:
Double click the alias : Configure Folder Actions
Below the left column, click
navigate to select your new folder
Below the right column, click
select the script image - normalize400.scpt
After that, drag and drop a picture file onto your folder.
The original will be move in the folder Originals (isn’t it original ?)
and a reduced copy 400 x height will be stored in the folder Normalized images.
And now, here is the script :
--{code}
Image - Normalize
This Folder Action handler is triggered whenever items are added to the attached folder.
The script rotates the image counter-clockwise (left).
Copyright © 2002–2007 Apple Inc.
You may incorporate this Apple sample code into your program(s) without
restriction. This Apple sample code has been provided "AS IS" and the
responsibility for its operation is yours. You are not permitted to
redistribute this Apple sample code as "Apple sample code" after having
made changes. If you're going to redistribute the code, we require
that you make it clear that the code was descended from Apple sample
code, but that you've made changes.
modified by Yvan KOENIG (VALLAURIS, France)
2011/12/08
This version normalize pictures so that
(1) the greater dimension become the width one (rotate left if needed)
(2) this greater dimension is ruled by the property maxWidth defined below.
property maxWidth : 400
-- set it to fit your needs
property done_foldername : "Normalized Images"
property originals_foldername : "Original Images"
property newimage_extension : "jpg"
-- the list of file types which will be processed
-- eg: {"PICT", "JPEG", "TIFF", "GIFf"}
property type_list : {"TIFF", "GIFf", "PNGf", "PICT", "JPEG"}
-- since file types are optional in Mac OS X,
-- check the name extension if there is no file type
-- NOTE: do not use periods (.) with the items in the name extensions list
-- eg: {"txt", "text", "jpg", "jpeg"}, NOT: {".txt", ".text", ".jpg", ".jpeg"}
property extension_list : {"tif", "tiff", "gif", "png", "pict", "pct", "jpeg", "jpg"}
on adding folder items to this_folder after receiving these_items
          tell application "Finder"
                    if not (exists folder done_foldername of this_folder) then
make new folder at this_folder with properties {name:done_foldername}
                    end if
                    set the results_folder to (folder done_foldername of this_folder) as alias
                    if not (exists folder originals_foldername of this_folder) then
make new folder at this_folder with properties {name:originals_foldername}
                              set current view of container window of this_folder to list view
                    end if
                    set the originals_folder to folder originals_foldername of this_folder
          end tell
          try
                    repeat with i from 1 to number of items in these_items
                              set this_item to item i of these_items
                              set the item_info to the info for this_item
                              if (alias of the item_info is false and the file type of the item_info is in the type_list) or (the name extension of the item_info is in the extension_list) then
                                        tell application "Finder"
--set name of this_item to "YK#" & (text -4 thru -1 of ("0000" & i))
                                                  my resolve_conflicts(this_item, originals_folder, "")
                                                  set the new_name to my resolve_conflicts(this_item, results_folder, newimage_extension)
                                                  set the source_file to (move this_item to the originals_folder with replacing) as alias
                                        end tell
process_item(source_file, new_name, results_folder)
                              end if
                    end repeat
          on error error_message number error_number
                    if the error_number is not -128 then
                              tell application "Finder"
activate
display dialog error_message buttons {"Cancel"} default button 1 giving up after 120
                              end tell
                    end if
          end try
end adding folder items to
on resolve_conflicts(this_item, target_folder, new_extension)
          tell application "Finder"
                    set the file_name to the name of this_item
                    set file_extension to the name extension of this_item
                    if the file_extension is "" then
                              set the trimmed_name to the file_name
                    else
                              set the trimmed_name to text 1 thru -((length of file_extension) + 2) of the file_name
                    end if
                    if the new_extension is "" then
                              set target_name to file_name
                              set target_extension to file_extension
                    else
                              set target_extension to new_extension
                              set target_name to (the trimmed_name & "." & target_extension) as string
                    end if
                    if (exists document file target_name of target_folder) then
                              set the name_increment to 1
                              repeat
                                        set the new_name to (the trimmed_name & "." & (name_increment as string) & "." & target_extension) as string
                                        if not (exists document file new_name of the target_folder) then
-- rename to conflicting file
                                                  set the name of document file target_name of the target_folder to the new_name
                                                  exit repeat
                                        else
                                                  set the name_increment to the name_increment + 1
                                        end if
                              end repeat
                    end if
          end tell
          return the target_name
end resolve_conflicts
-- this sub-routine processes files
on process_item(source_file, new_name, results_folder)
-- NOTE that the variable this_item is a file reference in alias format
-- FILE PROCESSING STATEMENTS GOES HERE
          try
-- the target path is the destination folder and the new file name
                    set the target_path to ((results_folder as string) & new_name) as string
                    with timeout of 900 seconds
                              tell application "Image Events"
launch -- always use with Folder Actions
                                        set this_image to open file (source_file as string)
                                        set {oldW, oldH} to dimensions of this_image
                                        if oldH > oldW then
                                                  set {oldW, oldH} to {oldH, oldW}
rotate this_image to angle 270.0
                                        end if
                                        set |échelle| to maxWidth / oldW
                                        if |échelle| < 1 then scale this_image by factor |échelle|
save this_image as JPEG in file target_path with icon
close this_image
                              end tell
                    end timeout
          on error error_message
                    tell application "Finder"
activate
display dialog error_message buttons {"Cancel"} default button 1 giving up after 120
                    end tell
          end try
end process_item
--{code}
Yvan KOENIG (VALLAURIS, France) jeudi 8 décembre 2011 21:25:33
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

How can I find movies created in past versions of iMovie? They are still on you tube but I want the original higher quality versions and I can't find them anymore.

How can I find movies created in past versions of iMovie? They are still on you tube but I want the original higher quality versions and I can't find them anymore.

Paul -
I'm sorry you've lost files, but when you set up an account as Guest, there's a message that clearly states "When a guest user logs out, all information and files in the guest account's home folder are deleted". If you want an account where files are retained, you should create an Admin or Standard type.
You will need to use data recovery techniques to see if your file can be recovered. The more that you use your computer, the greater the risk that the file will be overwritten. You can contact a professional data recovery service such as DriveSavers (which will be expensive, but you can judge the value of the file) or try something like Data Rescue. The latter has a demo which you can install to determine if your file can be recovered, and then, on purchase, you can actually recover the file.
Good luck!
Matt

Aperture 3 : recurring quality problems with "auto levels"

Hello all,
I've been using Aperture 3 since the day of its release, and I have recurring problems with the quality of the "auto levels" output, compared to plain old Photoshop CS3. Auto-levels in Aperture 3 frequently output grainy results.
Here are some samples (look at the central vertical darker part of the image) :
— original image (well, part of it) shot using my Canon EOS 400D :
http://plainsong.online.fr/aperture/Original.jpg
— the same original image with "auto levels" applied in Photoshop CS3 :
http://plainsong.online.fr/aperture/Auto-levels-Photoshop.jpg
— the same original image with "auto levels" applied in Aperture 3.0.1 :
http://plainsong.online.fr/aperture/Auto-levels-Aperture.jpg
And here are both "auto-levelled" images zoomed in for convenience's sake :
http://plainsong.online.fr/aperture/Auto-levels-Photoshop-ZOOM.jpg
http://plainsong.online.fr/aperture/Auto-levels-Aperture-ZOOM.jpg
I would like to know if I'm the only one to get such crappy results in Aperture, on a not insignificant number of photos. These poor results are very visible in some photos. This is really irritating, because this lack of quality means I have to open those images in Photoshop just to apply auto-levels. And I thought Aperture would be smart enough to spare me those round-trips!
(By the way I've never had this kind of quality problems in Photoshop.)
Please share your experience. Thanks!

Here is another example :
http://plainsong.online.fr/aperture/Example2.jpg
Aperture auto-levels seem to choke on dark areas. Will we be obliged to bright and sunny shots ?

How to extract Cleared and Open Items from SAP R/3?

Hi experts,
I have a requirement from user to extract cleared and open invoice items from SAP R/3.
Can someone tell me how to do that?
Thanks!

Hi,
Use the Data source 0FI_AR_4 to Know the status (0FI_DOCSTAT) of payment to be done by customer.
OR
Enhance the 2LIS_13_VDITM with VBUP fields which will give the status of Billing.
With rgds,
Anil Kumar Sharma .P

When I put in my earphones to listen to music the sound isn't clear and I have to push and hold them in it in order for it to be. It's not the earphones because I use them in my laptop and they work fine. Is there a way to fix this problem?

Whenever I put my earphones into my iPod Touch 2g the music isn't clear and I have to push and hold them in order to hear the song normally. It isn't the earphones because I tried another pair, that worked fine, and there was still no difference. I also use the same pair of earphones in my laptop and it sounds great. Is there a way to fix this problem without having to buy a brand new iPod touch? Do I need to clean it or something? And if so, how would I go about doing that? Thanks!

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
If still problem that indicates you have a bad headphone jack.
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours. Likely not worth it for your old 2G iPod
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit

Yoga 2 Pro tent mode and auto-rotate not working

I have had a Yoga 2 Pro since June. Recently the Tent mode and auto-rotate features do not work.
When I put the Yoga 2 Pro into Tent mode the keyboard and touch pad are still active underneth. However, they shutoff when in tablet mode. Lenovo Transition starts automatically and is running.
Auto-rotate does not work at all now. The screen is un-locked.

Dear NX3
Welcome to Lenovo forums
Please try to uninstal the Lenovo transition program and download the version in the below link and instal it
http://support.lenovo.com/us/en/downloads/ds038767
Thanks
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Development of Report for Cleared and Uncleared Vendor Line Items

Hi
we are in the process of developing a customized report, which invloves the details of cleared and un cleared line items for vendors. How can we obtain the details in SAP
regards
satyen

Hello,
Before consider developing any program development, I would request you look into the options available with various reports in Standard SAP for vendors.
FBL3N would essentially satisfy all the user needs across various industries.
Please also go through F.98 for all vendor reports.
Regards,
Ravi

I HAD MY MACBOOK MEMORY CLEARED AND CANNOT UPLOAD MY IPHOTO ANYMORE

I recently had my macbook memory cleared and reset to all default settings. I was advised to back up all my personal documents and data as everything will be cleared. However, due to some technical issue (and one of the reason for memory wipe) i had to manually backup important documents, which were my itune, iphoto, and uni assignments.
After i my macbook had been wiped and returned to default settigns i began to reinstalled the documents i had backed up on my external hard drive. However, when i came to open iphoto it was saying i had to download it from the app store?? when i looked on the app store it was asking for me to buy iphotos for over £10 !! i was not aware i would have to buy this feature as i never originally bought the feature when i first got my macbook. without downloading iphoto i cannot access my photos which was the main thing i wanted to save as these are personal memories of me and my children.
Can anyone help me with this issue as i do not feel i should buy iphoto just so i can recover my own photographs, i have already paid for the memory wipe as it was strongly advised by the technician, who also helped me back up my documents in the store (which took 4 hours). I am correct in thinking that iphoto originally came as standard on my macbook when i bought it in 2009 or will i be required to purchase this and download it again??

Your post says you have a late 2009 MacBook with OS X 10.6.8. With the MacBook, you received 2 gray-faced OS X disks, one with the system programs and one with application programs. The application program disk will have iPhoto on it, so you would re-install it from there. See this Apple note on how to reinstall iPhoto.

Cleared and uncleared items

Hi,
I need to print both the cleared and uncleared items at the footer of the smartform.
For this I need to pick dmbtr and zterm fields from BSID and BSAD tables.How can I print the cleared and uncleared items by picking the data from both these tables.

BSIK and BSAK are the tables
Regards
Sanil K Bhandari

WM quality Clear and Auto TO

Similar Messages

Maybe you are looking for