WM: Return Purchase order process issue-Using 161 movement type

Hi
      i did return PO with using 161 movementype .when i do GRN, WM is appear 601 movement type and storage type is 916 .
      i  think is wrongly triggered the movementype and storage type 916 .
      so where i made mistake the configuration.pls suggest me to do the configuration.
    with regards
   dinesh
Edited by: code acess on Jul 8, 2011 7:50 AM

You can ask SAP AG why it was designed this way - I already told you my explanation I have no better thoughts.
Just remark: WM-mvt 601 is not only related to sales process. Just check the WM/IM interface and you will see it (e.g. IM-mvt 261, IM-mvt 541 are assigned to it). I think it generally means outbound delivery process.
If the stock is not in the right place and system cannot find it based on the search strategy you use, you have to enter the data manually.
Edited by: Csaba Szommer on Jul 8, 2011 11:41 AM
Edited by: Csaba Szommer on Jul 8, 2011 11:48 AM

Similar Messages

  • Purchase order save issue, Using through BADI  PROCESS_PO_CUST ME21n

    Hi,
    Pls  Experts ,can we have some solution for this
    Purchase order save issue,  we are Using  BADI  PROCESS_PO_CUST currently we are throwing a
    message  using MMPUR_MESSAGE_FORCED if mandatory custom fields are not entered by the User,
    When we are saving the PO we are getting a exception which is raised by us ( custom message ) .
    Pls let me know is there any way to clear the message or to make mandory custom fields to be entered by user ..
    thanks  in advance...
    PK

    Hi Arnab,
    Thanks for quick response ..
    My requirement is if user is not entering the cusome fields then  i dont want to allow him to process any other Tabstrips  in the order .. thats the reason i am throwing an error message asking to enter custom fields.. then once user enters the custom fields which are created by   me .. then i should consider those values for further process like some other tab strips values maintained by the user then when we try to Save the PO still my custom error will be creating issue its not allowing to save..
    Can i have some solution ..
    thanks in advance.
    kumar

  • Goods Issue using BAPI_GOODSMVT_CREATE movement type 541

    Hi
        According to my requirement I need to do Post goods issue using BAPI_GOODSMVT_CREATE. But I am unable to do PGI . how to consume BOM details if batches are changed. please let me know what values I need to pass to BAPI . give with an example.
    Its an urgent requirement.

    are you passing batch number to the BAPI?
    if not try pass the batch number the rest of the things bapi will take care of.
    bi

  • 161 movement type

    Hi mates,
    I want to know in which scenarios/situations 161 movement type is used ?
    Thanks in advance.

    hii
    U have done PO , GR and invoice verification also.
    Now some material u wanted to return to cendor .
    SO now u have to start from Creating return PO, then return GR, and credit memo in invoice verification.
    In above scenario, once u do return GR , it'll take automatically 161 movement type .
    If u not done , Invoice verification ,now u wanted to retun some materil, then it'll take 122 movement type .
    Thanks

  • Sorting of bins by using WM movement types

    Hello,
    I want to have my sorting of bins in descending order when am using the movement type 999. For example, i have bins which name are 11, 12 and 13. When i used the WM movement Type 999, i want my TO created will trigger the bins in order of starting to 13, 12 and 11. where could exactly i need to define that given that the movement type 999 settings is blank data for source and destination source bin is blank.
    thanks in advance!!
    trek

    Hello John,
    The print code is the same for the movement types that i have used, it is 21.For the sort profile TO processing configurations, we have a standard data that we have followed for all the warehouses.Are there any ways where i could set the sorting of bins in decreasing or ascending depending on the movement types that i will used?
    Thanks in advance!

  • Change Movement type 161 to Z61 for Returns Purchase Order

    Hi All,
    I have a requirement wherein the GOODS ISSUE against the Purchase Order with the returns flag (returns Purchase Order) should call out or post with a different movement type (ex. Z61) instead of the standard 161.
    Further, it should also update the PO history with the movement type Z61, and create a Credit note with reference to PO / Goods Movement document.
    Is there any standard setting for this in standard customization??? If yes, what would be the setting??
    Also, as this is going to be background transaction (and not the MIGO or the VL10B) based on iDoc. So can there be a possibility to use the new movement type Z61, and then updating the PO History and further Post the Credit note based on this Goods Movement in Background? Any idea on how to do it on a high level would also help.
    It would be really helpful if I could get the reply at the earliest.
    Thanks and Regards,
    Ankush

    Dear Ankush,
    This can be done in standard way, kindly copy the 161 movement into Z61 and we have done the same for one of our project with 961 movement and it got updated in PO history.
    Regards,
    Karna J

  • Return Purchase Order (MVT #161) Sales Area Determination on Purchase Order

    Hi,
    I am working on return purchase order (Purchase order with return check box ON at item level) and creating outbound delivery with VL10B and doing PGI to vendor.
    Can someone help to figure out how sales area (sales org/distribution channel/Division) gets determine on purchase order item level "Shipping" tab ?
    In other word, as shown below for return PO, I have sales area 1180/50/01. I want to determine different sales area.
    Thanks.
    Regards,
    Ravi.

    However, you can enhance the system to use multiple sales areas for return by using retail sales area. The below notes give more details:
    https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361…
    https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361…

  • Import standard Purchase Order process and interface tables

    Hi all,
    We are populating three PO interface tables from our custom developed application. PO_HEADERS_INTERFACE, PO_LINES_INTERFACE and PO_DISTRIBUTIONS_INTERFACE. We are using 11.5.10.2 version of Oracle Apps.
    Initially we did not manage to populate the distributions interface table, but, now we are populating it. And after doing so, when we run the Import standard Purchase Order process for 'Approved' POs, the process_id for even the record which has correct distributions info also gets 'Rejected' as a value. The process is considering a mix of records : the approved POs that DO NOT HAVE distribution info in PO_DISTRIBUTIONS_INTERFACE (which we had not managed to populate) and the approved POs that HAVE distribution info in PO_DISTRIBUTIONS_INTERFACE.
    does the Import standard Purchase Order process populate partial data that could be good or it rejects the whole lot of records?
    Can anyone guide on this issue?
    Thanks and kind regards,
    Aparna
    Edited by: Aparna on Jul 24, 2009 3:45 AM
    Another piece of info I would like to share is
    I have run the process for an approved PO with distributions info in PO_DISTRIBUTIONS_INTERFACE. This time no mixed data. In PO_INTERFACE_ERRORS table, an entry was found: for column name : PO_DISTRIBUTION_ID in ERROR_MESSAGE column 'Error: Has no distributions'.
    Edited by: Aparna on Jul 24, 2009 8:03 AM
    After carrying out number of tests, I have found out that
    1) if the approval_status for the po is 'Approved' in the po_headers_interface table, it gives the above mentioned error and the process_id is 'rejected'.
    2) if the approval_status for the po is 'Incomplete' in the po_headers_interface table, the process add the 'accepted' value for the process_id. But, the charge account number is not populated in shipments.
    Edited by: Aparna on Jul 31, 2009 1:07 AM
    There has been some progress on this issue. The process sees distributions data into the PO_DISTRIBUTIONS_INTERFACE table. Yet the following errors are found in the process log file:
    Start dist default process
    before getting period name
    after getting period name
    -->Intfc error occurred ...PO_PDOI_INVALID_GL_ENC_PER
    before workflow
    unit price = 18.5, rate = , unit price in functional currency = 18.5
    after workflow
    Start dist creation process
    Start dist validation process
    -->Intfc error occurred ...PO_PDOI_INVALID_BUDGET_ACCT
    Start insert new record into po_distributions
    Distribution ID: 252
    dist num: 1
    last updated by: 1189
    po header id: 5283
    po line id: 5878
    line loc id: 5924
    sob id: 21
    cc id: 1560
    qty ordered: 10
    Req Header Ref num :
    Req line Ref num :
    Req dist id :
    ROW ID: AAHUc1AFPAAAQ04AAC
    call tax
    Rollback for the Last Errored Line: 10
    All Lines in error - Rolling back the header
    We opened new GL periods for the calendar and yet same errrors are seen. Can anyone suggest any solution?
    Kind regards,
    Aparna

    Hi
    Do you have a copy of your insert statement?
    regards

  • Return Purchase Orders- CESS ACCOUNT NOT GET Debited in MIGO

    Dear Expert,
    We are implementing Return PO procedure for Materials.
    Business scenario :
    Goods received from vendor during Material receipt Stock Account debited and GR/IR Clearing account Credited and Cess account Credited further during Invoice Posting Material Vendor is Credited with debiting GR/IR Clearing account and Cess Vendor is get Credited by debiting CESS account
    In Case of Return Purchase Order we are sending Materials back to Vendor during Goods Issue to Vendor Stock Account Credited and GR/IR Clearing account debited but Cess account get Credited insted of debited,
    Please advice what setting can be done to debit CESS Account during goods return
    Regards,

    Hi
    Thanks for reply, vendor has to pay duty to govt if vendor is not belong to factory location
    during GR for outside vendors pay duty to govt  but naw we want to return materials to vendor at this time we also want to recover duty paid to govt.
    to make this possible we have Created vendor code for Govt creditor and condition is created with feature of delivery cost
    goods are return to vendor by creating Return PO ( as no reference document available ) and goods issue with movment type 161.
    Pls advice

  • BED,ECS and SECess value not defaulted in J1IS for return purchase order.

    1)I have created return purchase orde for an excisable material.
    2) In the purchase order i am able to view the BED,ECS and SEcess values.
    3) I have created MIGO, for the return purchase order with excise as part 1 only.
    4) While doing J1is or the 161 material document number, the BED, ECS and SEcess values are not defaulted.
    Kindly help me to solve this issue.
    Regards,
    jayakumar

    Hi,
    Check the settings in
    Tax on Goods Movements  --> India --> Account Determination
    Specify Excise Accounts per Excise Transaction - Check for ETT OTHR
    OTHR          CR Credit     PLAAED PLA AED account
    OTHR          CR Credit     PLABED PLA BED account
    OTHR          CR Credit     PLAECS PLA ECS Account
    OTHR          CR Credit     PLASED PLA SED account
    OTHR          CR Credit     RG23AED RG 23 AED account
    OTHR          CR Credit     RG23AT1 RG 23 AT1 Account
    OTHR          CR Credit     RG23BED RG 23 BED account
    OTHR          CR Credit     RG23ECS RG 23 ECS Account
    OTHR          DR Debit     MSUSP CENVAT suspense account
    also check for Specify G/L Accounts per Excise Transaction
    Regards,
    Vikas Mayekar

  • Come here and help me? about return purchase order.

    I created a Return Purchase Order by tcode me21n,then use migo_gr to do goods receipt,next how to do the invoice verification so that reduce the liability.
    Pls tell me the tcode,and how to operate in detail.
    Thank you in advance!

    Hi Yulin
    It can be done in many ways..will tell you a rare process assuming you are using shipping/picking...the return to vendor process begins with a requirement to return an item to a vendor. The initial activity is to request a Returns Material Authorization (RMA) from the vendor. This is a manual step and the RMA number will be entered into a text field in the return PO. The Buyer will then create a Return PO in the system. The return PO is similar to a standard PO except for the return flag which sets up the return delivery to enable shipment of the item(s) back to the vendor.
    The Return PO confirmation goes to the Vendor and the Return Delivery is sent to the Shipping department where the item(s) are picked and shipped back along with a Delivery Note. When the Shipping department creates the delivery the item(s) are relieved from inventory. A credit memo is generated which relieves the liability to the vendor.
    Regards
    Yogesh

  • Return Purchase Order Functionality

    Hi ,
    I have created a Return PO ( With R as checked) and now trying to do MIGO agst that.
    In MIGO , what options i have to select. I can recall there was an option for "GOOD RECEIPT" and "RETURN PURCHASE ORDER" , but here "RETURN PURCHASE ORDER" is not coming as a reference document.
    Could u pls tell me the reason for that or how can I make a GR for that Purchase Order ?
    Regards
    SHREY

    Hi,
    Select option Goods Receipt > Purchase Order in MIGO and follow the below process.
    1. ME21N - Create a Returns PO (Activate "Returns" indicator for PO line item)
    2. MIGO - Goods Receipt > Purchase Order (Returns PO) (Here system will hit Mvmt type "161" and you can also select Un-restricted/blocked stock from where you want to return the stock)
    3. J1IS u2013 Excise Invoice Other Movements
    Here click on u201Ccreateu201D button to create an outgoing excise invoice and reverse the CENVAT Amount.
    Here put all details as below and Press u201CEnteru201D.
    Ref.doc.type - MATD
    Doc Number - Material document No of 161 mvmt
    Doc Year
    Series Group
    Excise Group
    Vendor
    Here check BED, ECS and SECess values to be reversed and click on u201CSaveu201D button to post the excise invoice.
    4. J1IV - Post and Print Outgoing Excise Invoice.
    5. MIRO - Credit memo w.r.t. Returns PO.

  • GTS block for return purchase order

    Hi,
    Our ERP system is integrated with GTS system. After creating a return purchase order in ME21N the order is blocked on 'Sanctioned Party List Screening' and 'Legal Control'. However, it is still allowing to create return delivery with movement type 161 in VL10B even if the GTS block is not released.
    We need to build control to stop allowing to create return delivery if the order is blocked in GTS. Is there any standard way of controlling this or we have to custom develop it? Kindly guide me on how to achieve this.
    Thank you,
    Ranjith

    Hi,
    VL10B- is the PO due for delivery.
    Find the standard process for VL10B
    Stock transport order is also a  Purchse order type only When you do STO via SD Route (via delivery.picking, pgi etc) then Shipping tab must appear in your PO Then only it is possible to do via SD Route For shipping tab to appear in PO there are some necessary configurations to be done in SPRO This is done under img- -purchasing- -set up STO 1.Define shipping data for plants 2.Create checking rule 3. Define  checking rule 4.Assign delivery type and checking rule 5.Assign doc type,one step procedure and under delivery tolerance These five are important activities Enclosing here with a model settings study this and understand and then configuration will be more easy Sales area 0003, 04, 21 plant is 1002 Sales area 0004, 05, 21 plant is ABCD If you transport material from 1002 to ABCD plant then 1002 is supplying plant and ABCD is receiving plant Now this ABCD plant should be made as a customer in XD01 mainly with shipping conditions in that data in sales area 0003, 04, 21 and this internal no has to be noted In STO the receiving plant is being made as a customer in the supplying plants sales area and the internal customer no has to be assigned In- -mm- -purchase order- --define shipping data for plants Now in that img activity that i mentioned above against plant 1002 you have to give sales area as 0003, 04, 21.
    Ashish

  • How to prevent Output to be generated for Return Purchase Order.

    Hi All,
               while creating a return Purchase Order the output is getting triggered. Now for Return Purchase Order the business does not want the output to be generated.
    So is there a way by which we can have the automatic output generated for normal Purcahse Order but not for Return Purchase Order.
    The system uses standard Output Type NEU for message. And condition record maintained for generating output (print/email) while saving.
    Is there a way by which this issue can be addressed.  if so how ?
    Thanks.

    Dear all ,
    a material goes storage location to client  through pr ,in client site i get faulty material
    i want to retorn that to my plant or storage location
    that basis how to make retorn po and what are the procedure ?
    what is movement type ?
    Regards
    shiv

  • No change of Quantity in ATP report for Return Purchase order

    Hi,
    There is an issue with ATP report. We have a customised report for ATP, the quanity is not changed in the ATP report for the return Purchase Order.
    Will there be ATP carried out for the return purchaser orders.
    Regards,
    Jagadish

    hi,
    this is to inform you that,
    i think when goods are going from the company at that point of time ATP check it will do then when goods coming in to the company in form of returns at that point of time you dont need ATP check.
    any how sit with ABAPER and debugg the program because if you are getting any values into Retuns ATP field.
    that might be the issue with your requriment.
    regards,
    balajia

Maybe you are looking for