WM settings of processing the posting change in the background?

Hello,
When WM is active and usage decision is made then posting change is generated in 922 area in WM. We need to process this posting change.
My question is, how can I make the process automated as follows.
u201CWhen usage decision is made in quality then, then WM stock will turn in to unrestricted and posting change generation and process should happen in the background.u201D
What are the related settings of processing the posting change in the background?
Thanks

Dear Milind,
Please have a look at OSS notes nos. 965094 and 566090. As a rule, direct transfer order creation is possible if the posting triggered by the usage decision (to unrestricted use stock, for example) refers to the entire inspection lot quantity.
Best regards,
Christiane

Similar Messages

  • Error occurred during WM processing for posting change delivery

    Hi Experts,
    I am getting the following error when i try to create Outbound delivery aginst PO.
    "L9 612 Error occurred during WM processing for posting change delivery"
    Diagnosis
        The indicator AUFER from the delivery type contradicts the
        storage location constellation that was determined by the
        WM system.
        TVLK-AUFER = '<VAR2>'
        WM = '<VAR1>'
    1.Purchase order is Stock transport order ME21N ( UB)
    2.Try to create Outbound using VL10B and i am getting the above error,
    Thanks in advance.
    Cheers...Gopi

    Hi Gopi,
    Looking at problem you discribed, I am assuming you are using the delivery type other than "NL".
    The reason for this error is the indicator "order required" in delivery type defination set to 'X : sales order required' and you have assigned this delivery type to the purshasing document UB in STO customising. So the requirement of delivery defination of having prior document as sales order is conflicting.. so the error is there.
    Resolution:
    Please change the assigned delivery type to NL to purchasing document type UB in SPRO> MM> Purchase order>set up for STO>assign delivery type and checking rule.
    If you have custome delivery type the go to spro> LE> shipping>deliveries>define delivery type
    change the order required from X to "B".
    Hope this will help.
    Regards,
    Sudhir

  • How to change the posting date at the line item level in a sales order

    how to change the posting date at the line item level in a sales order

    Hi,
    I believe the POSTING DATE will appear on the accounting document
    In the Accounting document, the posting date will be based on the  Billing date.
    Please let me know if you need any more details
    santosh

  • The answer helped me.But still, what are the settings that I have to change for the behavior of the mouse pointer towards finder? Also the mouse pointer sometimes  doesn't accept my command and start clicking itself.what is the problem and how to fix it?

    The answer helped me.But still, what are the settings that I have to change for the behavior of the mouse pointer towards finder? Also the mouse pointer sometimes  doesn't accept my command and start clicking itself.what is the problem and how to fix it?

    If the mouse clicks something on its own then it looks like you have a hardware problem with the trackpad or possibly the battery that is right underneath the trackpad.
    I have read that the battery can swell and that would put pressure on the trackpad.

  • Tried the posted solution for the RETR problem and it works once then it returns. How do you make the change permanent?

    Tried the posted solution for the RETR problem and it works once then it returns. Once the email dl'ds the file deleted per the instructions returns. How do you make the change permanent?

    Hi DOC808HI
    # I don't know what you mean by "posted RETR solution". Could you please post a link to the suggested solution? Perhaps you are referring to this thread: https://support.mozilla.org/en-US/questions/991792 ?
    # Anyhow any further troubleshooting information you can provide will be great e.g. Your Operating System Version (XP, 7, Mac OS X Mavericks), your anti-virus if any, your mail provider, your ISP, what you did, what happened with exact error message, what happened
    Cheers!
    ...Roland

  • I've seen all the posts for fixing the wifi on the 4s, none of them work!  So, who can tell me why my iPhone 4S cannot find any wifi when it used to easily, and when it does it can never connect?

    I've seen all the posts for fixing the wifi on the 4s, none of them work!  So, who can tell me why my iPhone 4S cannot find any wifi when it used to find wifi, and when it does find a wifi network it can never connect?  You think apple would have a clue how to fix it!  Because turning the wifi on and off doesn't work, resorting network settings doesn't work, even restoring phone to factory default doesn't work...

    Did not work. I've selected iMessage to ON and left it. After a few hours I recieved a message "activation unsuccessful. Turn on iMessage to try again". This has been going on for the past 3 days.

  • HT201471 I updated my iPad 2 (model A1395) to IOS 8 and all the colors changed and the photos are like negatives.  why? and how do I fix it?

    I updated my iPad 2 (model A1395) to IOS 8 and all the colors changed and the photos are like negatives.  why? and how do I fix it?

    Looks like someone changed setting in iOS8.
    Change this setting.
    Settings -> General -> Accessibility -> Grayscale or Invert Colors

  • Issue with the Posting Date of the Purchase Order.

    Hi All,
    There are fields in BW like SSL1: Time OK, SSL2: Qty OK, SSL3: Time & Qty Ok, SSL4: Days Late (Routines are written to calculate). These fields will indicate whether the delivery against a GR is OK or not with respect to Time, Quantity and the No. of Days..
    But here the issue I am facing is
    If there is only1 delivery/ GR against a single item the calculation in BW are correct - i.e. for a particular PO if there is only one delivery the above fields like SSL1: Time Ok, SSL2: Qty OK will show like the delivery is done within the specified time and everything is OK (in case if it is delivered within the allotted time)
    But if there are multiple deliveries or multiple GR's  posted for one PO item, the calculations are going wrong i.e. even if the delivery is done well within the specified time it is showing the wrong calculations like it is delievered too late. Because in this case the earlier dates are overwritten.
    Can anyone throw me some light on how can I go about solving this issue.
    I am thinking of declaring the Posting Date as the KeyField of the DSO as of now it is a Data field  I also want to know the impact of assigning this as a Keyfield.
    Thanks in advance,
    Prasapbi

    Hi,
    As I understand, you have a DSO based on Purchase Order and your key field is PO and its line item. The problem as you stated will always be there if you have multiple deliveries/GRs created for a single line item because the system will overwrite the entries for same key.
    Problem with adding Posting date as keyfield will be that then your key will be PO-PO Lineitem-Date. When PO will be created, the Posting date will be blank(correct me here if I am wrong), therefore you will have one entry for same PO-line item combination. One without date and other with date, which again would be incorrect. If my assumption about Posting date was wrong, even then your data may not be correct because then you may have many entries with same posting date which again would overwrite each other.
    If there is any direct link between PO line item and number of deliveries that will get created for them, then you can bring that field in DSO as keyfield. But I don't think there is any such field.
    Looking at your report requirement, I would suggest that you make a DSO based on Goods Receipts and then calculate these keyfigures by comparing the dates between GR posting date and PO line item date.
    Else you can change the way your datasource works(if its generic one based on function module). Since your main requirement is to check whether the GR posting date has met your SLA or not, you should fetch all the details only when GR is created and make your key field as PO-PO Line item-GR

  • Why does my cursor arrow refuse to open links.  The arrow changes to the text bar

    When I have links or boxs that tell me to check them to opne something or go somewhere else, my cursor arrow, when I move it over the print, changes to the text bar that shows where my curcsor is within text.  Then nothing happens when I click on the link or instructions to "click here."
    So when friends or anyone sends me an e-mail with a URL I'm supposed to click on the arrow disappears and goes back to a text bar and I can't open the link.  Sometimes I can copy the URL into the browser to make it work, but why can't I click on the link or URL (blue)?
    Help!

    Two things to try:
    1. Trash the preferences file - this often solves otherwise inexplicable issues.
    2. A corrupt monitor profile may also be causing the issue.
       This thread explains how to change the profile in a Windows machine: http://www.lightroomforums.net/showthread.php?14070-How-to-assign-an-sRGB-ICC-Profile-to-y our-monitor-(Windows)
       I will let someone else explain the process for a Mac OS machine if that is what you are using and it appears that the monitor profile may be an issue.
    Tony Jay

  • The post-expression for the step 'Set Station Global Models' could not be evaluated.

    When running a TestStand sequence, I get the following error message:
    The post-expression for the step 'Set Station Global Models' could not be evaluated.
    Variable or property types do not match or are not compatible.
    Error Code:  -17321; Variable or property types do not match or are not compatible.
    Although I do understand what the above is telling me, fixing the root cause is somewhat another thing.
    I'll explain the scenario.  The code is developped in TS4.1.0, although that should be irrelevant.
    I inherited a TestStand project which calls LabVIEW modules.  The original sequence works fine on the test pc (which is remotely located).  The local and remote PC's share the same StationGlobals.ini.
    Here is why it is strange..  I do get the error message on the local PC whether I use the old or the new code.  I was assuming that using the same StationGlobals.ini would have fixed that, but it didn't. 
    When I run the old code on the remote PC, I do not get that message, but I do get it with the new code.  I don't recall modifying code that affected the StationGlobals.  My goal is to fix it on both machines (at least the remote one).
    This is the expression that it does not like:
    StationGlobals.Models=Locals.Models,
    However, that very same expression exists in the original code.  The one thing that did change is the addition of a new model number in the Locals.Models.newNumber.  I suspect that this contributes to the error.  But why does it give me an error when I run the original sequence locally?  Maybe I should try running it again..
    In either case, any suggestions to overcome the error?
    Thanks.
    RayR
    Solved!
    Go to Solution.

    Please ignore post.
    I found the problem..  There was a mismatch with the number of models.  Easy fix.  It's all good.
    For someone else who might tumble onto this thread for the same reason, here's an explanation.
    I added a new model with its variants to the list of Locals.Models.  In total, there were 16 additions to the list.
    I also added these to the StationGlobals.  Which meant that my StationGlobals no longer matched the one on the remote PC. 
    Where the error came in is that there was one missing model in the StationGlobals, so the size (number of models) did not match that of the Locals. 
    Slight oversight in the sea of models that are listed (I'm not even going to count them).  Now fixed. 
    ... and embarrassed ...
    I may as well give myself an "Accepted Solution".
    Spoiler (Highlight to read)
    Since I've been naughty all year it will be my only Christmas gift..
    Since I've been naughty all year it will be my only Christmas gift..

  • When I share a pages document as a PDF (via e-mail) all the pictures change from the original document, most are missing with just a few of them repeated in the spots where others had been.  How do I do this without the document changing?

    When I share a pages document as a PDF (via e-mail) all the pictures change from the original document, most are missing with just a few of them repeated in the spots where others had been.  How do I do this without the document changing?
    I need to be able to send it to a PC in order to print it.

    Hard to say what is happening without examining the file.
    If you like click on my blue name and email me both the .pages file and the the .pdf you have made from it.
    Peter
    ps It would help to say what version of Pages you are using and on what you are running it. iOS or Mac and what version.

  • Project Server 2010 - Modification date and name of the person who made the last change in the project

    Hello everybody
    I'm with a doubt.
    I got in the business
    environment Project Server 2010 and
    would like to get the publication date,modification
    date and name
    of the person who made
    the last change in
    the project. It is possible
    to doby the native
    resources or is
    there any query in
    SQL Server to perform a
    query of this information.
    Thank you.
    Obrigado por contactar o fórum Microsoft Technet!

    Hi Hezequias,
    You can get the ProjectModifiedDate column in MSP_EPMProject_userView in the Reporting DB where you can
    get the data based on the projectUID. 
    The "last saved" date in the draft DB (be aware that querying in the draft DB is not supported by MS).
    For the "last modified by", I think it is not stored in any place.
    But you can develop custom code upon publishing the project (Event BeforePublish), writing the current
    date and username automatically into a custom enterprise field.
    Hope this helps,
    Guillaume Rouyre, MBA, MCP, MCTS |

  • How to stop the auto change of the desktop background picture ?

    How to stop the auto change of the desktop background picture ?

    Well . . thanks, but I already have done that and I still have the problem. The background changes to the standard picture galaxy not to one of the options. Sorry my question wasn't clear enough.
    Thanks. 

  • Just transferred data to iMac from working Mac Pro that is using Parallels and Windows 7 and the Biblesoft 5  and it will not open on the iMac the only change is the my new iPhone number is  OS.  Any ideas?

    Just transferred data to iMac from working Mac Pro that is using Parallels and Windows 7 and the Biblesoft 5  and it will not open on the iMac the only change is the new Maverick OS from the macpro Lion OS.  Any ideas?
    <Personal Information Edited by Host>

    Setup Assistant and Migration Assistant do not restore MS Windows, it only does the OS X partition. All of your Windows stuff must be backed up and restore using a MS Windows application. If no one on this forum is able to answer your question then I'd repost it on a Parallels forum to see how other Windows users approach this.

  • Does any one know if Apple is going to make the necessary changes to the new pages program so we can merge our contacts into a letter as before

    Does any one know if Apple is going to make the necessary changes to the new pages program so we can merge our contacts into a letter as before

    No.
    No more than anyone knew they were going to take away over 90 features.
    Have you tried using Pages '09 which should still be in your Applications/iWork folder?
    Peter

Maybe you are looking for