WM staging of materials not completed for entire quantity

Hi all,
I get this warning when I try to stage materials for a production order:
WM staging of materials not completed for entire quantity
The system allows you to continue with the process but in the end you find that some of the materials are not staged and you may need to create regular TOs for them.
Can anyone suggest how I can fix this problem??
Thank you very much.

Hello,
Please try setting the Complete material staging indicator for the PP interface via:
SPRO->Logistics Execution->Warehouse Management->Interfaces->Define Porduction->Whse Number --> For you warehouse, tick the complete matl staging indicator.
SAP helps do state that " When the system generates transfer orders for transfer requirements from production (PP), this indicator controls whether a complete staging of materials must take place. This means that the system must generate transfer orders for the total quantities of all items in the transfer requirement."
So hopefully, this should help.
Thanks,

Similar Messages

ERROR: "You did not complete the entire form. Please enter your country."

When I tried to download a song tonight, I got a message that said that my billing info had changed and that I needed to verify it before I could purchase any music. On the "Edit Payment Information" page, I put in all of my info (my address was missing), and hit done. I get the error: "You did not complete the entire form. Please enter your country." Well, the country field is not editable, and but it says "United States," which is the right country. I can't get passed it, so I can't download anything. I'm running the latest version of iTunes... but I haven't purchased anything since.
The other thing that concerns me is that I didn't change any billing info, so this is a bit strange. Does anyone have any ideas of what's going on? Thanks!!

Just in case this ever happens to anyone else, here is how to fix the problem (THANKS, ITUNES SUPPORT)!!
1) Sign out of the iTunes Store by choosing Sign Out from the Store menu in iTunes.
2) Visit Apple's My Info website:
http://myinfo.apple.com
3) Choose your country and preferred language. Then enter your iTunes Store account name and password and click Continue.
4) Choose Address Book from the menu on the left. On the Edit Address Book page, look at your shipping addresses at the bottom. If you have multiple shipping addresses, remove any out-of-date or duplicate addresses by clicking Delete. Also, make sure the state or province field is filled out correctly for each address. To edit an address, click Edit.
5) Now choose Phone Numbers from the menu on the left to look at your phone numbers. The area codes should be in the area code fields and the phone numbers should be in the phone number fields. If an area code is missing, or if it is in a phone number field, your account information may not save properly.
6) Make any other necessary corrections, then click the Save Changes button.
7) Click Log out in the upper-right corner.
When you make your next iTunes Store purchase, you will be asked to review your billing information. At that point, you can change your information or simply click Done. After that, you should be able to purchase items.

Genius - You did not complete the entire form

When I try to sign in to Genius with my Apple ID it gives me the message:
You did not complete the entire form
The only bit to fill in is the Apple ID. I tried using me.com but that didn't work either.

pscurran wrote:
Jeez I have survived such tricky stuff with this kit! I had the same problem here. I did'nt see it either and probably never would have! Thought that was AOL. Are Apple forms becoming more cryptic or I am becoming more stupid? I hope not, on both counts. Thank you. Paul
No, it's been that way for years, ever since Apple & AOL agreed to let AOL members access the store from AOL.

Project with profit center was not created for entire period

Hi everybody,
I need a help with a problem here.
The alert mesage "project with profit center was not created for entire period" was displayed.
Then I searched for the creation dates and the profit center was created before the project gets its firsts postings. Therefore, some line itens don't exist in profit center (ledgers).
My two questions:
The first one, is it possible to input line itens in a retroactive way?
Everytime I need to use the project master data this alert is displayed. How can I fix avoid this message?
Thanks,

Hi,
Regarding your issue, it is theoretically possible to reverse all settlements up to the start of the project and then to settle again it
is a must to check in standard if the profit center is valid from the project start date onwards.
Check the attached note 1048945.
The system generates error message KM700 ('Profit center <PRCTR> does not exist for <date>') when you enter a profit center on a project definition if the profit center is not valid in the entire period between the basic start and the basic finish date of the project definition . However, only one warning message should only be generated in this case.
regards
Waman

OTO information not complete for non ABAP instance of system &1 in SMSY

Hello,
We have just applied Stack 23 and stack 24 to our Solution Manager system. When we are executing action System Logon from a ticket we are getting the following error:
OTO information not complete for non ABAP instance of system &1 in SMSY
We checked that this new message was created in note Note 1427761 - ChaRM: incorrect target system for action "System Logon".
We went to the SMY transaction to the Product System definition for our system but we could not find which OTO information is missing there, where to load it, etc.
We appreciate your help.
Regards
Esteban Hartzstein

Hello,
We have not applied the note separately, but we applied the support packages, so all the changes were applied, and therefore we are getting this error message of "OTO information is not complete ....
We have updated as suggested the info regarding the system in the SMSY. We have read the Remote System Data.
We will run SOLMAN_SETUP again to review the setup, and then test again
We appreciate also if you provide any additional input.
Regards
Esteban Hartzstein

GOODS RECEIPT IS NOT COMPLETE FOR ITEM

Dear Friends,
Created Repai Order having sublet (external service) and then did complete purchase process for same. I have crated PR / PO did Goods recipt for whole quanity and also did invoice for this PO.
Now when trying to do blling getting error GOODS RECEIPT IS NOT COMPLETE FOR ITEM.....
Also in dosument fow its showing PR / PO / GR nos.
But in STAS OVERVIEW showing Goods Receipt as OPEN
any suggetions ???
Regards

Hi
In transaction code you are checking and whats excat error message system is giving ?
You can tick Delivery Completed" Indicator in PO and see whether it helps ?
Check
Kishor Rudani

Error "Data packet not complete; for example, 000013" when reading from PSA

Dear all,
I have an issue with my data loading, when i execute my infopackage, i specify that it should be loaded into PSA before going to the data target. in my infopackage request i notice that i have got missing data package
e.g.
Data package 1 : everything OK
Data package 2 : everything OK
Data package 3 : everything OK
Data package 8 : everything OK
Data package 10 : everything OK
Data package 12 : everything OK
Data package 13 : everything OK
what happen to data package inbetween e.g. DP4, DP5 etc etc?
In my "step by step analysis" under the status tab everything is green and nothing seem to have went wrong, no short dump, no job cancelled, nothing.
Since everything "seems" to be alright, when i try to update subsequently to the data target, i get the following errors below.
Data packet not complete; for example, 000013
Request has errors / is incomplete
I got 2 questions here...
1. why do i have missing data package and it still showes me a green idicator?
2. how can i solve this and is this something i should be worried about?
Thank you very very much!

Hii SCHT,
you encounter these type of errors rarely...
but in RSMO screen, check for any TRFCs struck..
also go to the JOB in Source System and analyze the JOBLOG,
there you can find some information about what tht particular job did..!!!
and after that check for the same in the BW system...
perhaps while transferring?extracting the recordsthrough data packages, it might have missed ..
Force the request RED and repeat the IP again...
you dont need to worry about anything...simply force the request red and reload.. just let us know if the problem still persists after repeating the load...
Regards
Prince

When I download Adobe free trial, download completed, then no more information pop up, why? I mean it is not complete for installation yet.

When I download Adobe free trial, download completed, then no more information pop up, why? I mean it is not complete for installation yet.

Flash was designed for computers with cooling systems, it runs fine on my single core Atom netbook even.
The new iOS devices come with dual core Atom-like A4 netbook processors, but atlas! no Flash.
It's because Flash needs cooling and those iOS devices don't have it.
So dump the phone if the lack of Flash is such a bother, it's a overpriced, over rated phone that has little purpose that a regular phone with text messaging, a laptop, a GPS, a camera and a iPod can do so much better and cheaper as they are separate devices with more abilities.
Check out this poll.

Materials not relevant for Picking

Hi Guys,
I have an outbound delivery wherein some of its materials don't have any value for the picked quantity and the materials' picking status says that they are not relevant for picking. Do you guys have an idea on how can I fix this issue??
Thanks!

HI,
As per your above thread, I understand that your delivery has multiple line items with different materials.
Check whether any of the material is relevant for picking. If yes, then compare the sales views of the materials which are relevant for picking with the ones which are not.
Hope you can find some differences.
Also check the transaction 0184 & OVLP.
Thanks & Regards,

Seacrh not working for "entire message", Help!

Worked once but not anymore on my new MacPro.
Search works for "To", "From" and "Subject" but not for "Entire Message".
Really annoying as I use email to conduct most of my business.
Does anyone have a solution please?
Thanks!

Hi Roland,
I'm not an expert here, but have had a similar issue. Here's what you can try:
If you have an IMAP mail account and you have changed the preference for keeping copies of messages for offline viewing (in the Advanced settings of the Mail Accounts preferences) from the default ("Keep all messages and their attachments"), then an Entire Message search will not return any results. Change the preference back to the default and search again.
You might need to synchronize the mailboxes on your computer with those on your mail server. To synchronize mailboxes for all mail accounts, choose Mailbox > Synchronize All Accounts. To synchronize mailboxes for a specific account, choose Mailbox > Synchronize and then select the account.
If an Entire Message search doesn't work after synchronizing a mailbox, you might need to rebuild the mailbox.
Hope this helps!!
Lora

Download does not complete for Photoshop CC

Hello me it is same but with first pro except that I reach 42% its puts me download failed but when I see the errors it did y in none.

Branching this to a separate discussion.
Foxxen I would recommend reviewing the installation logs to determine why the installation for Photoshop did not complete. You can find details on how to locate and interpret the installation log files at Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html. You are welcome to post any specific errors you discover to this discussion.

Syncing will not complete for my ipad

Can anyone advise as to why my iPad will not complete Syncing with iTunes? I ahve no problems with my iPhone.
Thanks

Are you asking about the 4 digit passcode used to open the iPad? Or are you referring to our Apple ID and password?

Workflow process does not complete for 3500 but works for about 10 records

Hi Gurus,
I am a novice in workflow. Pls bear if the questions are very basic.
We have a old custom workflow process which is inistaed by a PL/SQL procedure
WF_ENGINE.CreateProcess ---
WF_ENGINE.StartProcess ---
COMMIT; ---
Now this process has run for over 6-7 years but has always processed max upto 8 or 10 records at a time. Now we had about 4000 records in a table and the process was running for more than 4 days now and it has been termiinated.
I could not see any new item_keys. Is it because we have a commit only at the end.
This process has 3 sub processes. they are connected by 'AND' and then we have an 'End' node.
The first sub-process is simple and we can see a record in wf_items .
Howver no records are there in wf_items for the 2nd and 3rd sub processes.
How can we check the point where it has hanged. Querying Status monitor just gives the first sub-process that has completed. How to debug for these cases.
This has always worked for small volumes. Now we have about 4000 records and we face this problem
The process actually checks data from the table and based on some conditions , it send 5 different notifications to 5 different mail groups. So we expect about 4000*5 mails to be sent.
Any help is welcome.
Thanks,
L
Edited by: 901929 on 20-Jul-2012 01:38
Edited by: 901929 on 20-Jul-2012 01:39

L,
Please check the following:
1. Since this is pure PLSQL you can have a SQL script where you enable a database event to get a trace and then run tkprof on the output to spot any performance problem. You can use something like:
alter session set tracefile_identifier='Background' max_dump_file_size='unlimited' events '10046 trace name context forever, level 12';
begin
wf_engine.CreateProcess(...);
wf_engine.StartProcess(...);
end;
commit;
alter session set events '10046 trace name context off';
select fnd_debug_util.get_trace_file_name() tracefile from dual;
2. Do you happen to know if WF runtime tables are being purged regularly? If this is not done you can expect serious performance problems. If this is WF Apps embedded you need to clean data using the concurrent request Purge Obsolete Workflow runtime data, if not then you can use the APIs in package WF_PURGE.
3. You will only find one record in WF_ITEMS for this process if those sub-processes belong to the same item type
4. About the notifications, make sure you are not running into this design problem: https://blogs.oracle.com/oracleworkflow/entry/looping_within_a_workflow_process
Regards,
Alejandro

Gr process is not completing for since 2006 while running batch job.

Hi,
we r running batch job and its not delivering material .in po history it showing not in Gr place. plz give reason and solution for this.
Thanks,
Sydanna

hi,
if you have alrady post that doc then pls check in migo- display & check th'r in thaty doc. batch is created or not or check storage location & plant plant also , it th'r is mistake while doing the migo then reverse./ cancle it
next go to in mm01--select that material no - select all the necessary subsereen inculuding plant/ data data store-1 & plant/data stor.1-screen -
click on batch management --& save
after that you do the grn againt of that po
thanks
santosh

ERROR: "The IDoc interface is not complete for message type DELINF"

Dear All,
The ERROR happens when I use IDoc inbound test tool:
- Basic type used: DELVRY06
- Basicallly this IDoc is supposed to create inbound PGI of a DO. I just put the DO number in WE19.
But ended up with the error mentioned. Let me know if oyu need more details.
Thanks and regards,
Will.

Hi,
Please check whether the partner profile configuration is done completely such as any message control parameters are fine or not.
Regards
Archanaa

WM staging of materials not completed for entire quantity

Similar Messages

Maybe you are looking for