WM - Stock Placement and Stock Removal Strategy

Hi Gurus
Need yr expertise..
What would be the ideal stock placement strategy if need to store standard pack in one location and partial quantity in another location?
example:
standard pack for material A is 100pcs
if GR 250 pcs, TO need to be created for 200pcs at location A (since it is standard pack) and
50pcs at location B (sicne it is partial)
The same logic aplly for stock removal strategy. If customer order of 200pcs, system need to pick
from location A (since it is standard pack). If customer order 50pcs, system need to pick from
location B. What will be the ideal stock removal strategy?
Please advise
Rgds..Sanjay

yu can make use of the small/large stock removal strategy and for the concerned material in WM 2 view you can give the control quantity like if the requirment is of >200 pc then storage type 0002 should be used to pick the goods otherwise if required quantity is less then system should search for storage type 0001
this is a standard strategy

Similar Messages

Report MCL1: Analysis Stock Placement and Removals: Selection

Hello,
I want to use report by T.Code MCL1- Analysis Stock placement and Removals. This is standard SAP report. When i am putting my warehouse no and execiting it it is saying no data for selection.
I want to know to run this report whether any SPECIAL customization setting is required and what will be the output of this report.
Regards,
Shailesh

Hello,
This is an older post.
In SPRO for LIS >Updating Control>Activate Update-->Inventory Controlling / Warehouse Management
Tables are:
S090 WM: Stock placements/removals
S091 WM: Quantity flows
Regards
Waza

MCL9 Mat stock placements and removals report

I'm trying to find a good report that shows the material stock placements and removals. I tried MCL9 but i get a message indicating no data exists. why would that be? Thank you

Hello,
This is an older post.
In SPRO for LIS >Updating Control>Activate Update-->Inventory Controlling / Warehouse Management
Tables are:
S090 WM: Stock placements/removals
S091 WM: Quantity flows
Regards
Waza

Very imp stock transfer and stock transport order

hi folks,
please explain me in detail the difference between stock transfer and stock transport order.
regards,meena

Hi:
Stock Transfer is the physical movement of material from one location to another location,stock transport order is one way of doing the stok transfer.
Stock can be transfer between plant to plant,company code to company code,storage location to storage location.
However there are different procedures for stock transfers:
1.Stock Transfer using one step procedure: Here Goods issue and Goods receipts happens in single step.
2.Stock Transfer using Two stage procedure:The two-step procedure allows you to monitor the stocks in transit. After the goods issue is posted at the issuing point, the stock appears "in stock transfer" at the receiving point and is managed as such in the system.
3.Stock Transport Order:
This is transfer of material from one plant to other plant or co.code to co.code via SD route.
Here a.receiving plant raise the stock transport order on issuing plant.
       b. Issiuing plant creates the outbounmd delivery against STO and PGI.IF it is in India,then excise
           invoice creation.
       c. Receiving plant post the goods receipt against outbound delivery and post the excise ivoice.
       d. Invoice verification.
The main advantage of Stock Transport order is you have a more control because you can have purchasing document behind itand you can check the PO history which would gives all the details for Delivery as well GR documents.
However ftor STO via SD you need to configure the set up stock transport order in MM>Purchasing>Purchase Order-->Set Up Stock Transoport order.
Also on a data maintanace side you need to maintain the custmor and vendor relations.
Hope this would helps you.
Cheers
Rahul
Awards plz.if helpful.

Stock tracking and stock posting

Hello,
In the Stock Management/stock transactions/Initial quantities, stock tracking and stock posting,
Suppose the following context:
Item stock: 1000
Counted: 900 (posted in stock tracking)
When reconciling in stock posting is raising this error:
"Item price has not been entered"
though we choosed Allow Inbound Posting without Price.
This is only happening when the counted quantity is smaller than the item stock, that is, in the example given everything is OK for counted quantities >= 1000.
SAPB1 Version 2007PL30
We have try in 2005PL45, and it worked. So, we suppose this could be a bug. The strange thing is that it worked in a previous version!
Do you know something about this behaviour?
Thank you for your help,
Regards,
Vanessa

Hi,
Please refer to notes:
1155329 Error: "item price has not been entered" in Stock Posting
1173589 SAP Overview Note for SAP Business One 2007 A PL 37
Hope this can be helpful
Best Regards
Helen Sun
SAP Business One Forums Team

2LI_03_BF Material Stock Type and Stock Category Determination

Hi All,
I need your help in determining the stock type and stock category of a certain material.
Is there a way to determine it manually? cause i tried to look at the MSEG table and it does not show anything but when i try to run the material document that contains the movement/material it populates the stock type and stock catertory in the setup tables.
Regards,
Alden

Hello
1) 2LIS_03_BF clearly gives you the receiving plant and the issuing plant. For eg if you are doing plant to plant transfer there will be 2 entries in 2lis_03_bf , one for issue and one for receiving. You can bifurcate the receiving plant and the issuing plant by using either process key (BWVORG ) or debit credt (SHKZG) (H stands for issue & S stands for receipt).
2) 0MAT_PLANT_ATTR provides you the plantwise specila procurement type
3) you will get VBUK-GBSTK in the standard source 2LIS_11_VASTH . You will have to combine the data at the BW level
Regards
Gajesh

Status Stock M and Stock Category S

I have problems for GR using MB1C and mov 501 because I need to use that with Status Stock M and Stock Category S, Do you know if is possible this kind of combination M and S for GR?

Hi Rose, thanks for your information, let me explain you all the context,
First I need GR for damage materials to the WH but with Special Stock field = M for non valued (without accountant document) and second this material needs the stock category "S" (blocked stock) because this material doesn't need to create a necessity when the MRP runs (due is scrap material).
I hope this information could clarify my question and is enough for you to give me an answer
Thanks in advanced
Diana

Stock Management and stocking units

Good morning,
We need to manage item stocks in two units: kilograms and item units. (kilograms to stock valuation, but units to count the items). For instance, when performing a delivery (sales), we need to issue item units, but the price the items have to place depends on the kilograms of the items (not on the number of units).
Is a standard way in SAP to do this?
I have tried with factors (in item master data) and too Sales UoM at Sales Data in the item master data, but no way. It seems to me strange that SAP cannot do that.
Thank you very much for your help.

Hi Vanessa,
This forum is for SBO development using the SDK. As your question relates to the application functionality, I think you'd have a much better chance of getting the correct answer by logging your question on the P2P forum (S Users only):
http://cpsn-channel.sap.com/businessoneforum
Kind Regards,
Owen

Custom Report for the Stock and Stock value for a specific date

Hi SAP Gurus,
Is there any SAP standard t-code or any logic to get the transcations (additions (for example: Purchases) and subtractions (Sales) to the inventory) for a particular materials in a plant and with Total Stock and also Total Stock value when that particular transaction happened?
Our system is R/3 4.7
I looked at the MB5B, MBCE, MBCA, MC44, MB51 and some other standard T-codes but could not find the total stock value at the time of Transaction happened.
The history tables MBEWH and MARDH are updated after the month end closing procedures, right, which means I will have the inventory value changing every month if material has Price "S".
Thank you,
-Harter

Hi Harter,
Unfortunately, you cannot see in a single tcode the value of stock and stock quantity on a specific date. As you yourself have pointed out, we only have to make use of the history table MBEWH, MARDH for the month wise stock quantity and value. Along with that you should also make use of the table MBEW to take teh stock quantity and value. So the total value of stock on a particular date will be
Stock qnty = MBEWH value until the previous month (for teh specific valuation class, period etc) + MBEW value for the present date.
But this will nto work out if you want to find out teh stock quantity and stock value on a past date basis. For past data, only m onthwise data is available. For this anyway you can refer to MC.1 and so on reports.

Diff between stock transfer order and stock transport order

pls any body tell me diff between stock transfer order and stock transport order .is both are use for same pursose?pls explain

Check
very imp stock transfer and stock transport order

Report which gives stock quantities and values

Hi all
Is there any standard transaction which gives report of stock quanitities and stock values.
Thanks and Regards
Renukaprasad.

hi,
Quantities from tables MARD and MARDH
Valuated quantities with value from tables MBEW and MBEWH.
Customer order stock from MSKA and MSKAH
stock at vendors from MSLB and MSLBH
Batch stock from MCHB and MCHBH
customer consignment stock from MSKU and MSKUH..
or
MC.9

SAP Scripts for Stock Removal and Stock Placement ?

Hi All,
Can you please let me know what are the SAP script names and Transaction codes for Stock Removal and Stock Placements ?
Thanks,
Raj

Hi
Tcode is MIGO only (select Goods receipt) and mvt type as
Putaway (305, 315, and so on)
Stock removal (303, 313, and so on)
Transfer posting (301, 311, and so on)
regards
Yogesh

Stock placement strategy via user exit

Hello,
I'm tring to change putaway strategy by using a user exit.
In customizing i enter:
Logistics Execution u2013 Warehouse Management u2013 Strategies u2013 Putaway Strategies u2013 Define strategy for fixed bins.
Table V_T301S.
When i enter one of the movements i can put V next to User exit act.
How can I make the connection between the strategy and the user exit?
Thank you,
Lilah.

Hi,
In the ST masterdata (config: WM - Masterdata - Define ST) you must activate the User Exit field for putaway and/or removal for the specified ST you want to use with a user exit. See view: V_T3010-USEIN or Table T331-USEIN. When this indicator is set and you go through the TO creation log, you will see that at some stage there will be an entry where is states that you are using an user exit to place/pick stock.
Cheers,
Hein

SAP WM-Stock Placement Strategy "P"

Hi Gurus
While using stock palcement strategy "P" "by storage Unit Type" we are dividing bins to section like
Stoarge Type Section   No of itms
231                 A               3                 1       2     3
is this code need to append to the storage bin co ordinate
like 002-001-A/1 002-001-A/2    002-001-A/3
If so when i create the storage bin co ordinate through Ls01n by defining the Storage bin co ordinate as 002-001-A/1 system throw error "The special character "/" must not be used in the storage bin name".
How to solve this ,pls explain the stock palcment through startegy "P" ,where to mention the bin section in the bin coordinate.

Hi Kumar,
I suppose you have maitained capacity check for the storage type 231 .
Based on the SUT's and u r strategy P, the system will allcate the numbers.
usually if there are two SUt's ina a bin where it belongs to the storage type 231 then the bin will have 001-02-A/2
the special characters gets assigned after the placement.
hope this helps !!!

User Defined Stock Removal Strategy

Hi,
We want to define a user defined stock removal strategy while creating TO for delivery using transaction LT03. This can be done in user exit MWMTO004. Although we modify the output table T_QMAT in this exit as per requirement , the TO is not split as per the table.
SAP proposes all the batch bins in table T_QMAT , but if all the delivery quantity is found in first bin itself , the TO is created with that bin only , no Split. We wish to split the TO as per table T_QMAT.
How to split the TO as per proposal from the exit ?
Please provide some ideas.
Regards,
Tushar

Hello,
You can change the Storage unit type in this exit EXIT_SAPLL03A_005 of TO creation transaction.
I am not sure, If this helps you.
Thanks and Regards
Reddy

WM - Stock Placement and Stock Removal Strategy

Similar Messages

Maybe you are looking for