WM Storage Location control problem - no TR created in receiving warehouse

Hi all,
I have configured the system to perform a 311 mvt from sloc 4002 to sloc 0010. Both Slocs have different warehouse numbers assigned.
The transfer is working fine, however in the receiving warehouse no TR is being generated even though I am using the standard *** 311 movement type which has create TR flag set.
If I disable the config and perform the 311 in MIGO after confirming the TR in the sending warehouse, the stock is moved to the new warehouse and a TR is created.
Has anyone experienced this before?
Mark

2nd entry in storage location control is ZF2 501 DE01 0010 311
1st case:The entry.e. ZF2 501 DE01 0010 311 seems to be wrong.
Your warehouse storage location 0010 is managed with ZF4 and not ZF2.
But in this case, the way you created entries concludes that you want to transfer the stock from one Sloc to other Sloc which have separate warehouses.
i feel your approach to excute this scenario seems to be not a valid one. I don't understand why you are running this process as WM transaction followed by IM document. You said that you are creating the transfer order first.. must be with wm mvt 311 in LT01. Standard WM mvt 311 doesn't allows manual TO creation.Your both storage locations are assigned to different warehouses. You should post the movement in IM first, then follow the WM activities.
2nd case:If you say that ZF2 is correct, then your storage location is wrong, it should be 4002 instead of 0010 and you are transferring stock from one storage type to other storage within same warehouse.
If you want to do this scenarion as WM followed by IM, then please change the Wm mvt 311 in ZF2 to allow manual TO creation.
In movement type properties, set the destination storage type as 501.
Strorage location control should be ZF2 501 DE01 4002 311
Please let me know your thoughts on this.
Regards,
Santosh

Similar Messages

Plant n storage location control

Hi all,
how can we control the plant and storage location control?
If I creaet PO for one plant, I must not create PO to other plant.
Thanks

Hi,
You have created PO for ONE plant only, but one plant have multiple storage location and also created PO to multiple storage location in one purchase order based on authorization.
Plant and storage location control through authorization of create,edit/change,display,print of PO.
Hope, it is useful for you.
Regards,
K.Rajendran

Storage Location Control and ATP

Hello Experts,
I have activated the storage location control for the putaway process and is working fine for MM and WM perspective. The following are happening without any problem:
1. Doing a GR to the virtual Storage Location and this storage location is blank in TR.
2. The stock from the virtual storage location is considered in MRP while planning.
3. TO creation from TR and doing putaway in real storage bin and Transfer posting 311 at IM level.
The requirement is: The stock from the virtual storage location should not be considered in the ATP while creating a sales order. At the moment, ATP is considering this stock as available and confirming to a date immediately but in reality it should not up until the putaway is complete. And I think this is the sole purpose of having Storage Location Control in place.
I did my research in this fourm and looked at the Warehouse Management Guide and it says "This means that for the duration of the putaway process, the stock for putaway is either not visible at all or clearly visible as stock that can not be picked, depending on the configuration of the availability check."
Can someone help me understand what to check or uncheck in ATP? Or should I post this question in the ERP-SD forum?
Appreciate you help.
Regards
Narottam

Hi,
I believe your mistake is here:
"800 K15 0800 8001 411 check box is checked "
The combination should read
800 902 0800 8001
The storage type is the interim storage type, that is where the posting shall happen. And if you leave out the check box it happens automatically.
But why movement type 411? This usually should be 311.
Best regards
Juergen

Storage location control

Hi,
Based on our current requirement, the moment we create a sales order, an out bound delivery and TO should get create automatically, if stock is available. We are successfully acheiving this functionality. But system is creating out bound deliveries for the stock in GR interim area, and failing to create TO, since stock is not available in WH.
To avoid this, we are trying to use storage location control functionality. With this process we are facing below two problems.
We could not able set up configuration for multiple IM movemnt type for a storage type
number two the GR reversal process (with mvt 102) is not working. It is working when we do not confirm the TO which got created due GR posting with mvt 101. But when we confirm the TO and try to cancel material document in IM, WM process not completing.
Please advice.
With regards,
Prabhakar

>
prabhakar pisapati wrote:
> Hi,
>
> Based on our current requirement, the moment we create a sales order, an out bound delivery and TO should get create automatically, if stock is available. We are successfully acheiving this functionality. But system is creating out bound deliveries for the stock in GR interim area, and failing to create TO, since stock is not available in WH.
>
> To avoid this, we are trying to use storage location control functionality. With this process we are facing below two problems.
>
> We could not able set up configuration for multiple IM movemnt type for a storage type
> number two the GR reversal process (with mvt 102) is not working. It is working when we do not confirm the TO which got created due GR posting with mvt 101. But when we confirm the TO and try to cancel material document in IM, WM process not completing.
>
> Please advice.
>
> With regards,
>
> Prabhakar
Your cycle is: Sales order -> outbound delivery (automatic) -> picking of outbound delivery (automatic) -> Confirmation of TO (automatic).
It appears that in your system, the GR interim area is a separate storage location, and the warehouse is in a different storage location. So your technique of setting picking storage location is correct.
The IM movement in standard is 601, and the WM movement is also 601 During picking, the system is trying to pick up stock from the storage type mentioned in the storage type search strategy. If stocks are present there, then a TO will get created and confirmed.
It is not clear why you require multiple IM movemnt type for a storage type. I am afraid I havent understood your current setup.
Problem 2: GR reversal not working
When a GR is done, a 101 IM movement calls a 101 WM movement, and the stock gets moved to a storage type based on the search strategy. When this is cancelled via 102, a 102 WM movement is triggered (in standard). In case this is not happening in your system then you will have to check the problem.
Try posting the 102 movement material document, and then create the TO against the mat doc using LT06. You will be able to see the problem (TR not created / immediate TO creation not configured / immediate confirmation not set).
Regards,
Aroop

Reg Storage location control when pulled materials via fixed bin replenishm

We are Using Storagelocation Control Functionality in WM
We have below Storage locations
RW01 - Raw Material Storing
PD01 - Materials staged for Production Lines
I have setup RW01 as Standard Storage location and PD01 as 'not copied to TR'
When i try to do bin to bin tranfer raw material to production lines From Bin in RW01 to Bin in PD01, TO has RW01 as expected, i Run posting change background job and this functionality is working fine
We would be using Fixed bin replenishment strategy to stage materials for productions from raw materials storage
I run LP21 for PD01, it has created TR but has storage location PD01 instead of RW01.
PD01 shouldnt have copied as i have set 'Not to be copied to TR' for PD01
Fixed bin replenishment doesnt support storage location control? does we need to go for customization ?
Please help

Please help
Bin to Bin is working fine as per storage location control functionality set-up
We have issue with fixed bin replenishment combined with storage location control
Please share your inputs, Thank you
While debugging we relaixed SAP doesnt check storage location control config at all while doing fixed bin replenishment, only custom solution to force system to check storage location control config and assign storage location is TR?
Edited by: Sasi nagireddy on Jul 18, 2011 8:34 AM

Storage location control, storage location ref.

Hello all,
I am new in WM,
Can anyone please explain me the *_Storage location control function_* and *Storage location ref* with the exmple in detail.
Go for this path if required:-
Spro-- log execution-- warehouse mang- interfaces inventory mang-- Define storage location control..
Please help me...
Abhinay Waikar.

Hi,
I;'ve used it for the following:
Standard inbound deliveries to be received in storage location 1000. After finishing the TO in WM, the material is transferred from SLOC 1000 to 1010. In the sales orders, 1010 is taken into account and 1000 is disregarded. I.e. stock in 1000 is not seen as available.
In this case available stock is indeed available, also in WM.
MdZ

Storage Location Control at customer level

Dear All,
Need a Customer wise Storage location control.
Eg.
Customer Name: ABCD
Storage Location: FG01
Customer Name: WXYZ
Storage Location: FG02
Regards,
Saravanan E

Hi,
I am not sure but Explore STOCK DETERMINATION topic,
IMG >> MM >> Inventory management & Physicl inventory >> Define strstegies for stock determination
where define stock determination group and Rule
Assign it header and Item level
On item level maintain storage location and for FG01 - put priority 1 and FG02 - Put priority 2
Assign stock determination rule to Application - Delivery.
check whether it works with batch.
I also update you if working fine.
Kapil

Put away to production lines directly, storage location control WM

We are Using Storagelocation Control Functionality in WM
We have below Storage locations
RW01 - Raw Material Storing
PD01 - Materials staged for Production Lines
I have setup 001 as Standard Storage location and 002 as 'not copied to TR'
Few materials are received directly to production lines instead of going to Raw material storage
PO--> GR is posted for PD01
Now TR got generated but doesnt have storage location in it, this is fine as per functionality
When i try to convert to TO it is copying MP01 since it it standard storage location
This is where we are getting 902 negative entries for MP01
No TR creation but bin to bin transer only solution ????

Any pointers ???

IW41 - Storage Location Control (User Exit)

Hi,
While I'm trying to use function Goods Movement in PM order confirmation, I only want to consume ingredients from one storage location.
Is there any user exit for this control?
Thank & Regards,
Begum

Hi Venkatesan,
Thanks for your reply. We first try to use the user exit CMFU0002 - Set parameters for time confirmation and goods movements. However, the system doesn't see this user exit while we are trying to consume materials from a storage location.
Best regards,
Begü

Any delivery note can be created if transfer materil in storage location

hi
any delivery note can be created if transfer material between storage location in the same plant. Or can i do the GR for that

Hi,
This might help you.
311 Transfer posting storage location to storage location in one step
The quantity is transferred from unrestricted-use stock of the issuing storage location to unrestricted use in the receiving storage location.
Possible special stock indicators:
E, K, M, Q
See also 321, 343, 349, and 455 for other stock types
313 Stock transfer storage location to storage location in two steps - removal from storage
The quantity is transferred from unrestricted-use stock of the issuing storage location to stock in transfer in the receiving storage location.
Possible special stock indicators:
None
315 Transfer posting storage location to storage location in two steps - placement in storage
In the receiving storage location, the quantity is transferred from the stock in transfer to the unrestricted-use stock.
Possible special stock indicators:
None
Reward points if useful
Regards,
Amrish Purohit

Replicate storage location to srm

Hi,
we are using srm 3.0 with ebp 4.0.
We have created new storage location in the R/3 system and replicated them to SRM system.
When i try to add the new stroage location in the org structure for a a user in extended attributes it doesnot get updated.
I select the source system as R/3, doing a F4 search on the Sloc field shows the new storage location and desc for it. but when i add it and click on save button the storage location is shown added but the desc is not there , I cant find the storage location when i am trying to shop.
Thanks
R.M.

hi
did you pull the plant first with associated with sl.
first the plant must pull in to dtm bbp_locmap table.
Storage location replication problem
note 1175255 in our R/3.
br
muthu

Storage type to be assigned to particular storage location

Hi,
As per clients new business requirement, 2 storage locations of a plant are assigned to same warehouse.
But as the storage types comes under warehouse they come under both the storage locations. Is there any configuration to assign specific storage types to a particular storage location.
I tried in SPRO under interfaces>IM>Storage location control but it does not allow.
Please advice.
Regards,
Pratap

Hi,
I feel the solution given by E060123 in his first reply should work well.
Did you first define the storage location refernce and then in the same config node under "Control of Assignment "Plant / Stor.Loc. - Whse Number" assigned the sloc reference to the respective storage location
And then assigned the reference to the search table as mentioned previously.

Automatic Inbound Delivery Creation in HU Managed Storage Location

Dear all...
I have created PO, packing instruction, and packing instruction determination.
Storage location was set to HU managed already.
Now I want do GR for PO (with MIGO transaction) which can create inbound delivery automatically, and also do the packing process.
Which config/setting should I do?
Thanks before.

HI,
In IMG-Logistics general-HUM-Basics-MM-IM-HU req for SL and default values for deliveries
Select the plant and click Sto Loc there u can find HU ReQ, Check that HU Req Box.
If you set this indicator for a storage location, the system does not create a material document when it carries out a posting, but creates a delivery via Shipping
Regards
Kk

Use of Vendor and Customer in 'Define Shipping Data for Storage Location"

Under the stock transfer order configuration, there is a IMG step "Define Shipping Data for Storage Location".
In this at storage location level, we can assign, sales org/distribution channel, division and VENDOR and CUSTOMER to storage location.
The customer number is used a sold-to-party in outbound deliveries.
But I am not able to figure out what's the use of VENDOR number we are specifying in this step.
If I am assiging the VENDOR Number here to every storage location, then when I am creating cross-company code Stock transport order, which vendor code I will select the one assigned to PLANT or one Assigned to Storage location.
Also I need to know what vendor account group I will use for creating this storage location vendor. I have more than one storage locations) under one plant. Soif I used account group as "0007" plant, SAP doesn't allow me to assigne one plant code to 2 vendors and in vendor master on 'additional purchasing data' screen I am not seeing storage location field, it has only 'PLANT' field.
So I need to know-
1. Which account group to use for creating storage location vendor
2. What's the ultimaye use of this vendor code
3. What vendor # I will use while creating cross-company PO (one for plant or one for storage location.
Thanks

Hi,
Define Shipping Data
Here in this step you maintain the customer number of the receiving plant. This customer number is used in SD shipping processing to identify the goods recipient (ship-to party) if stock transfer to be carried out with an SD delivery
A goods receipt can be planned in the receiving plant.
You can enter a vendor (transport vendor) in the stock transport order
In IMG step "Define Shipping Data for Storage Location".
You can assign sales org/distribution channel, division and VENDOR and CUSTOMER to storage location through Plant only.Means this Vendor is created for entering in the STO .This vendor is created for the the Plant (Supplying Plant)so as u can create STO.
Rewards If usful
Regards
Sanjay L

Making Storage Location field mandatory in Work Order

Hi
As per our proces, if PR is created from work order and if there is no storage location in work order then PO will have warehouse address as a shipping address. So it is expected that PR must have storage location details when it is created from work order to avoid incorrect shipping address in PO.
So, I want to make storage location field mandatory in components tab of work order.
Also I want to avoid the users to deliberately removing the storage location and making it blank.
Regards
Prakash

Hi,
You will have to use one of the below mentioned user exits to accomplsih this requirement.
CNEX0026 Maintenance order: General check for material
CNEX0027 Maintenance order: Determination of plant or storage location for component
Thanks
Narasimhan

WM Storage Location control problem - no TR created in receiving warehouse

Similar Messages

Maybe you are looking for