WM-storage unit number issue
Hi
Storage unit number is not generate in the transfer order .i made configuration for storage unit. But storage unit number is not
trigger in transfer order.
pls send me steps for configuratioin. ihave to check where i missed the configuration steps
with regards
dinesh
Edited by: code acess on Aug 18, 2011 5:25 AM
Hi ,
follow the below Process to Activate SU
First make your warehouse SUM active. Set your individual st types as SUM active and SUT check active
Active SUM for the storage types where material is to be putaway as well as removal, Storage unit configuration in LE -WM-Storage units- for master data. Maintain these storage types in storage type search to find the bins for putway & picking.
When you post GR in IM and the System will create the Transfer requirement .
Using The TR to converting into TO creating to the destination Storage unit bin.
Similar Messages
-
Hello friends,
I'm about to activating handling unit management for a newly cutsomized warehouse. hu numbers are 20 characters.
except this new one, all other warehouses defined in the client are storage unit managed and storage unit number length was set to 10.
so this is being a problem, when I packaged the stock in hu02. I need to change su number length from 10 to 20 but system says "this will cause serious result"..
Is anybody experienced this before? what is the possible result? or what kind of problems happens in my warehouses?
I d be glad if someone shares his/her ideas/experiences with me.
thanx in advance.Hi,
May I know if the question still exists or not? If so, please reply it. Thanks a lot.
BR -
Hello,
I've activated storage unit management in my Warehouse, but i can't see storage unit number in the storage bin.
I've customized number range for the warehouse:
But i can't see it in the storage bin:
Could you please advise, what else i have to customize?Hello,
You absolutely right.
I've made necessary cust. settings berofe posting goods receipt with storage units:
Customizing storage units number ranges:
And storage units customizing:
And also in Material Master:
But i don't see the storage unit type number in storage bin: -
Exit to confirm transfer order with a storage unit number
hi guys,
I want to confirm transfer order with a storage unit number from LT06 transaction, somebody know a user exit? .. actuallly i am using MWMTO004 (EXIT_SAPLL03A_005) but it doesn´t confirm the transfer order, How can i solve it? give me suggestions.
Thanks in advance.
Marisol.
Edited by: Marisol on Apr 28, 2010 7:40 PMI solved the problem myself.
Thanks. -
Automatic determination of storage unit number while putaway
Hi all,
In my system while creating TO either i require to enter SU number by viewing MMBE/LS26
or Have to create the new storage Unit number (i.e. assighning the new number).
Is here any provision to automatically determine new storage unit number & which setting its require.Number range once implemented then applicable to all storgae types. Please check SUT tick is active in storage type.
Check all relevant things of SU .Previously there was on thread on this subject in forum. Please check the same.
Regards,
Prashant -
Can i print Storage Unit number as barcode in SAP??
can i print Storage Unit number as barcode in SAP and also Scan the same number in RF devices.
Hello,
yes you can, the solution depends on which printer do you have, if you want to print on laser or label printer.
Please explain your requirement in more details
Christophe -
Check-digited Storage Unit number
I have a client who wants to start using a check digited storage unit number. Does SAP support such an option and if so, where can I find details on how it works?
I have a client who wants to start using a check digited storage unit number. Does SAP support such an option and if so, where can I find details on how it works?
-
Set storage unit number (SU)
Dear all,
I have a business scenario that barcode label is printed before goods receipt from production. The phyiscal cartons from production will be placed onto the pallet. Once the pallet label is full, the barcode code label is printed and scanned for confirmation of process order, and then following by goods receipt.
Since, I am using WM in particular Decentralized WMS, the system will generated TO automatically upon GR. As you know, storage unit number will be generated during TO creation. As we want to capture the barcode pallet label in the SAP system as our SU number. I wonder there is any user exits or other things that allow for setting the SU number from the barcode label number.
Ideas?
Thanks in advance.
Cheers.
TomHi,
May I know if the question still exists or not? If so, please reply it. Thanks a lot.
BR -
Destination storage unit number on LT03
Hi friends,
When we create a transfer order, we need to fill "Destination storage unit number" (LTAP-NLENR), with a value from delivery (we manage the "Destination storage unit number" with external number range).
Have you any information how to do this?
Please help me
Thanks & Regards
AlessandroI had the following response from SAP Service:
Unfortunately, the documentation of Enhancement MWMTO01 in SMOD clearly
says:
The user exit in the program is function module EXIT_SAPLL03T_001. In
order to be able to use the user exit, you must create Include ZXLTOU01
and activate the enhancement with transaction CMOD. As parameters, you
can use the TO header (import parameter I_LTAK_VB) and the items (table
parameter T_LTAP_VB). All database changes due to the transfer order
have already been performed. The transfer order is created.
With this user exit, you can update your own tables or trigger follow-upactions. Although changes made to table T_LTAP_VB do not have any
effect, they should still not be made.
Customer enhancement MWMTO003 is available for customer-specific stock
placement strategies though you should check carefully whether it meets
your exact needs. The enhancement is documented in transaction SMOD.
This could be used to determine specific SUs into which addition to
stock should take place but if you want to assign NEW SU numbers during
putaway then this is not possible in the standard.
Sorry I cannot provide you with a better answer. However I hope the
above information is useful to you. If you have no further queries,
kindly confirm the message at your earliest convenience. -
Same Storage Unit number for both source & destination storage bin
Hi, I have a requirement to have same Storage Unit number for both source & destination storage bin in transfer order screen.. can any1 suggest how to do it?
An early response is very much appreaciatedHello,
You absolutely right.
I've made necessary cust. settings berofe posting goods receipt with storage units:
Customizing storage units number ranges:
And storage units customizing:
And also in Material Master:
But i don't see the storage unit type number in storage bin: -
Warehouse storage unit number by userexit
Hi
The requiremnet is to get the storage unit number from the user exit not from the internalnumber range set in configuarion. The function module used here is CONVERSION_EXIT_LENUM_OUTPUT.And we set the the value 3 in sunmber conversion(omnn transaction).Hope if we set the value to 3 then it will call the function module and the number we set in the userexit will trigger.
Now we are getting the number as mentioned in the userexit in transaction LT01. But it gives the number in display mode(lt21) also and gets appearing in the past transferorders in the table.If any prerequistion required the please let us know.
Anybodyhave the experience in this please helpus.
Thanks in advance.
Regards
MaharajanHi,
Try LS11 might help you.
Regards,
Ninad Kshirsagar -
Hi,
Can the storage unit number be configured to accpet external format?
My user wanted to key in the carton number when placing it onto the pallet.
It is meant to keep all slow moving item into a single carton for storage.
Thanks
ByeColin,
Please have a look at OSS note no. 14881: You neither need an external number range nor a user exit.
Best regards,
Christiane -
RE: Storage Unit number be Optional
If Storage unit number is to be made for a particular storage type, can it be an optional entry?
ByeColin,
If you have activated SU management for a storage type then entering a SU number (or generating one) is mandatory for any Transfer Orders placing stock in this storage type.
For any other storage type where SU management is not active, you cannot enter SU number at all.
Regards
Baseer -
Hi all, I`m using the cycle counting transactions from the std RF functionality. I was wondering if ther is any way to have the system automatically determine the storage unit number that is in the storage bin. Since I am handling fixed bins for packing, once that the stock enters to this bin, we open the pallet and lose the pallet label. This will make very hard for the operator to enter the storage unit number when it is asked in transaction LM58, LM60, etc..
Thanks in advance!
MarcosHi,
Check the data in the Transfer Order, the item (such as the quant number, storage bin or storage type) does not belong to the storage unit number that you entered.
For more check the link:
http://help.sap.com/saphelp_45B/helpdata/en/c6/f83e194afa11d182b90000e829fbfe/content.htm
Regards,
Biju K -
Storage Unit number in SAP is showing on SAP but user getting invalid trans
Regarding the Storage unit TS0C230037 issue.
Checked storage unit TS0C230037 in the transaction LS33 & Table LEIN. This storage unit doesn't exists in Transaction data as well as table entry level
Currently I couldn't even see the storage unit in system.
Note: I could see this Storage unit TS0C230037 in LX03 Transaction code. But when I double click on the storage unit it says Storage unit TS0C230037 cannot be displayed.
Customer want move the available 4 Qty stock from that storage unit to other storage unit.
Kindly advise.Awesome, gr8.
Thank you Kiran.
But, not sure ,
1) How did you figure it out that this (just 4 fields) is bcz of UI Guideline app param?
2) If so, how do you know GL11 will fix it?
3) how do you know we are having GL20 in place, bcz in the below sap help link sap said GL11 is the default?
4) In which component SAP hard coded as 4?
5) Pls. let us know what are other params we need to check/test for our custom app?
Application Parameters and URL Parameters - Web Dynpro ABAP - SAP Library
Thank you
Maybe you are looking for
-
Adf faces command button, bindings and ejb 3.0 persisting problem
When mapping the persist method to an adf command button it got this error: 1. JBO-29000: java.lang.IllegalArgumentException: PERSIST impossible sur l'objet détaché : hr.entity.Departments@1b21.; nested exception is: java.lang.IllegalArgumentExceptio
-
Please help! My LG external hard disk is not showing in finder and trouble using disk utility
I used my LG external HDD disk drive on my mac a couple of times but now it's not being recognised by my mac anymore and doesn't show up on finder. I found the disk in disk utility and when i verified it, it said: Unable to bootstrap transaction gro
-
Group-Role Mapping OBIEE 11.1.1.6
Scenario: I have created some groups in console. Let the groups be A, B, C and D. Now I want to create a role call it Manager and map A,B, C and D groups to Manager role in EM. And then give permissions (like Dashboard access) on Manager role. Issue:
-
ILife media browser has incorrect date for Aperture photos
It looks like the iLife media browser use the date a preview was created as the date in the iLife media browser. Photos from the iPhoto library have the date the photo was taken. (A list view with file name, date and file size is available from a con
-
An Error in the Installation of PS CS2 on Windows 7
I haven't seen this issued addressed here on the forums yet, and I've been trolling for awhile Here's my problem: I recently upgraded my Windows Vista OS to Windows 7 (my computer is fully upgraded as far as I know since it's practically new too). Du