WM::system is not placing the stock another storage bin

hi friends
system is not check fill the stock to another bin ..system is placing the stock in same bin...what are the cofiguration required?
with regards
dinesh
Edited by: code acess on Jun 15, 2011 10:47 AM
Edited by: code acess on Jun 15, 2011 10:48 AM

hi SAP FC
Iam using putaway strategy is "L" ..storage is determing in the system ..every thing is working fine except placing stock to another bin
with regards
dinesh
Edited by: code acess on Jun 15, 2011 11:18 AM

Similar Messages

Create the stock in storage bin level

Hai all
     while i am doing transfer of order it is asking that storage unit type and the material stock is not maintained in storage bin .
can anybody tell me how to maintain the stock in bin level .please help me is there any tcode for that
regards
satish

Dear Satish
A storage type generally contains several storage spaces or slots. These are called storage bins in Warehouse Management (WM). The storage bin is the smallest available unit of space in a warehouse. The storage bin therefore describes the position in the warehouse where the goods are or can be stored.
Since the address of a storage bin is frequently derived from a coordinate system, a storage bin is often referred to as a coordinate. The coordinate 01-02-03 for example, can refer to a storage bin in row 1, stack 2, and level 3.
You assign each storage bin to a specific warehouse number and storage type according to its location. You must also assign each storage bin to a storage section.
You can also define the following additional characteristics of a storage bin:
         --> Maximum weight
         --> Total capacity
         --> Fire containment section
         --> Storage bin type (for example, for small or large pallets)
With certain stock placement strategies, the storage bin type plays a significant role in optimizing the automatic search for a storage bin in connection with the pallet type. For example, you can define the WM putaway strategy to place large industrial pallets into a specific large bin type and smaller pallets into small bins.
<i><b>For information on how to define storage bins, call up the Implementation Guide (IMG) for Warehouse Management and see under Master Data --> Storage Bins .</b></i>
Generally speaking, you can use any combination of letters and numbers for a storage bin coordinate with the exception of certain alphanumeric characters that are used for stock placement strategy P (according to pallet or storage unit type).
When goods are placed into storage, the system selects coordinates in ascending order according to specific sort criteria, and assigns the next available storage bin based on the coordinate structure you define for creating bins.
Thanks
G. Lakshmipathi

The system could not find the finished material in the stock.

The system could not find the finished material in the stock and gives the following error:
Only 0 YD of material 9000345 A-PIECE01 available.
I received the batch managed material from production with T-code=mb1c and mov type=521.
The received material is transferred into material with T-code=mb1b and mov type=309.
And finally the material is packed and thus the handling unit is created.
whenever i comes to make the delivery order in vl01n,the system could not find the stock packed in handling units and gives the error(Only 0 YD of material 9000345 A-PIECE01 available)
Regards:Vijay

Hi Vijay,
I have a question that have you define the UoM properly in the material master.
Also check the stock is showing or not in the system for your material.
Regards,
MT

The system is not considering the free stock in planning strategy grp - 25

Dear Frndz,
The system is not considering the free stock of child items available in the system.For the parent item, I have maintained a planning srategy of 25 (Make to order variant config).My client would like the system to consider the free stock available for child items.pls help me...
Regards,
Srini

Dear,
Strategy 25 will not consider the existing stock.
What you enter in MRP4 view ind/collective rquirement is applicable only for dependent requirement.
Also refer this thread?
Re: Strategy group 20
Run MRP in MD50 and then MD02 with palnning mode 3 deleted and recreated and check your result.
Regards,
R.Brahmankar

The system is not reachable, the login data could not be considered

Hello
I'm trying to connect via Hana Studio to a Hana One instance I have configured in AWS, following the guides & videos in the Hana Academy.
When adding the system in Hana studio, I get an error message after inputting the SYSTEM password:
The system is not reachable, the login data could not be considered
I've seen another post in the forum where the user solved the issue by resetting the SYSTEM password to a password without special characters, but mine is already "special character" free.
Are there others who have had difficulties when adding a new system?
Regards
Yann

Hi Swapan,
Thank you for your attention and message.
I downloaded the SAP HANA Studio from "Get your own SAP HANA, developer edition on Amazon Web Services (http://scn.sap.com/docs/DOC-28294)", specifically at SAP HANA Studio, developer edition and SAP HANA Client, developer edition, for Windows XP 32-bit. Is this HANA One? How to know the version of HANA server? How to make my Internet or firewall allow me to go out to the JDBC port? I am just learning to deal with these computer-science issues.
Regards,
Beiwei
Date: Wed, 4 Sep 2013 20:52:41 -0700
From: [email protected]
To: [email protected]
Subject: Re: - The system is not reachable, the login data could not be considered
                                                                                SAP HANA
    The system is not reachable, the login data could not be considered
    created by Swapan Saha in SAP HANA One Platform on AWS - View the full discussion
Hi Beiwei,
I suppose you are using HANA One (which you can only launch today from AWS Marketplace and HANA costs 99 cents/hr). If it is HANA One, which version of HANA One you are using? Please make sure you are using the same version of HANA Studio with HANA Server? Instance number in HANA One is 00.
If you HANA One, by default, it will open all the necessary ports. Please make sure you are Internet or your firewall allow you to go out to the JDBC port. If not, you cannot connect your studio behind your firewall with HANA server in the cloud.
Thanks,
Swapan
     Reply to this message by replying to this email -or- go to the message on SAP HANA
     Start a new discussion in SAP HANA One Platform on AWS by email or at SAP HANA

Reflecting credit note to the stock

Dear MM Gurus,
we have a requirement as below.
We will create a PO and do GR and IR. Later after some time if the material crossed expiry date, the vendor will replace the same with free of cost. Some times if he cannot replace , he'll give credit note and our FI people will deduct the amount from his pending bills. But the same will not get reflected on the stock. system will still show the stock.
can you suggest me the best solution. Either to scrap the existing qty or process through returns PO or any other process.
Satish

Hi
If the stock is replaced
1) Perform MB1B 541 to issue the expired stock to the vendor
2) Perform MB1B 542 to recieve the New Stock
If Credit note is recieved without stock replacement
1) Perform MIRO Subsequent Debit for the expired quantity
Accounting entry would be
Vendor Account Dr
Stock Acc Cr
Regards
Sandeep

System should not pick reserved stock

Dear, MM Experts, i am sd Guy
i want to block Reserved stock while creating sales order
ex: 150 qty kept In reserve for customer , Total plant stock 1000
Now if user created sales order with 150 qty Normally system will pick 150 qty From reserved stock ( 412 E)
Here user requirement system should not pick Reserved stock 150 Bz in critical situation is there Like non production of stock
ex total stock in the plant 175 only there ( ex 155,180,200,170) So in this situation only system will pick Reserved stock 150
Otherwise Reserved stock should be in reserved place only bz if is not like this always we have keep stock in reserve
Thanks

Dear ,
as per my Knowledge If we Reserve the stock By OVZ9 Include sales req check box it will be unrestricted it wont go to sales order
when stock is not there you can reverse the stock to normal stock by using 411E
i think this is only solution
How to block material for a particlar sales order
Regards
venu

Your system does not meet the minimum requirement for this update (9996)

Hi
recently had to reformat my system with windows 7 profesional. All windows updates where performed and all the drivers where installed correctly except the ethernet driver. windows 7 cannot find a suitable driver. I then downloaded the driver from the link provided on the hpe-590t download site, which is described as a intel gigabyte driver sp52222, however the software driver comes up with the following message your system does not meet the minimum requirement for this update (9996). Has anyone had a similar problem.
Hardware Ids are:
PCI\VEN_8086&DEV_0000&SUBSYS_00008086&REV_00
PCI\VEN_8086&DEV_0000&SUBSYS_00008086
PCI\VEN_8086&DEV_0000&CC_020000
PCI\VEN_8086&DEV_0000&CC_0200
Regards artie

I solicited the the assistance of another one of our experts who is a driver guru, you may see his reply here:
http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-Software-Recovery/Paul-Tikkanen/m-p/4990422#M...
I tend to agree that either the NIC is bad or possiblly a factory restore would help.
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

Not picking the stock for the delivery

Dear friends,
Though the stock is available, it is not getting picked for the delivery.
Can you guide me what are the things I should check to solve the issue.
With regards,
Atul

Hi,
If the picking tab is grayed use T.Code LT03.( IF ware house management is activated).Here fill the ware house number and plant and mention the delivery note number also. Now use The T.Code TCode VL02N here u can see the system automatically picks the required quantity.
If the picking tab is not in gray mode mention the storage location and the plant correctly. Even though the system is not picking the quantity check the Picking location determination with rule MALA.and also check any open orders are crated for the particular material .
regards,
vas.
Message was edited by:
v.s.vas.

I forgot My iCloud password, and i can not reset it as the system is not accepting the answer to the security questions and also the mail to my apple ID mail box is blocked, how can i reset my password for my apple ID.

I forgot My iCloud password, and i can not reset it as the system is not accepting the answer to the security questions and also the mail to my apple ID mail box is blocked, how can i reset my password for my apple ID.

Hello nmssns,
Thank you for contacting Apple Support Communities.
You can start with this article to reset your iCloud password. Depending on your exact circumstances, blocked email, forgot security questions, etc., there are links provided to guide you through those issues.
About Apple ID security questions
http://support.apple.com/kb/HT5665
Regards,
Jeff D.

FF not connecting to web- This "Network Connections" message pops up: Error 623: The system could not find the phone book entry for this connection. Any ideas?

About a month ago I could no longer connect to the internet on our PC. Every time I clicked on the Firefox icon the Netscape sign-on window would pop up. I would try to close it but it would pop up over and over again. If I tried to close it a dozen or so times eventually Firefox would open up but it would never connect. Just today I moved my Netscape file to the recycle bin. No longer does the Netscape sign-on window pop up but following Network Connection error message pops up: "Error 623: The system could not find the phone book entry for this connection".. This error window behaves the same way the Netscape sign-on window used to behave. Every time I click to close it it pops open again. After numerous clicks Firefox opens up but it never connects.

Do you have this error message on a Mac computer or on a Windows computer?
I've only seen this error mentioned on a Windows computer.
*http://kb.mozillazine.org/Autoconnect

SOLVED - BIOS UPDATE "SYSTEM DOES NOT CONTAIN the NECESSARY WMI SUPPORT for this VERSION of HPQflash

If you get infamous error when updating HP Portables (laptops/notebooks/ netbooks) BIOS within Windows:
"SYSTEM DOES NOT CONTAIN THE NECESSARY WMI SUPPORT FOR THIS VERSION OF HPQFLASH":
I am posting a solution found for own business laptop (HP 8540W & 8760W) so WebSearch engines index/register it in a few days - future sufferers come here and get a SOLUTION, finally. Disreagrd previous "experts" advises, they don't work 100% & pity on TechSupport folks who get HP paychecks yet don't know products their co. designs/manufactures (on deep Technical level):
Below is a SOLUTION (WORKING) !
Go into Services (Run "services.msc" or get there thru ControlPanel-->AdminTools-->), find following 2 services ==> make sure they're running, chances are they're NOT (as in my case I keep them disabled unless need running):
1) "HP Software Framework"
2) "HP Service" [no typo - a real plain name]
If not running, set Properties-->Manual and click "Start", make sure both are running.
Rerun BIOS updater, choose option for "Within Windows" or something to that effect (using HPQ/ROMpaq updater), rather than "create USB BootDisk on Key", this time it should work without the hassle of a BootDisk creation.
Should work from within Windows environment.
Notes:
a) Likely only one (1) service is responsible - namely "HP Software Framework" for HPQ Updater to fail, but doesn't hurt to reenable/restart both services.
I in fact am responding to other customers who elect to Update BIOS within Windows, perhaps oldfashioned but to me Boot Updater is more natural & always works regardless of WMI Support.
b) After done, don't forget:
*) Recheck BIOS settings - update may've added new and/or changed old, so rescan tobe sure.
**) Go BACK into Windows-->Services.msc & redisable both aforementioned Services if were originally disabled; or you're a computer Pro, you know what you're doing & like me keep all HP services disabled. The ones we got on EliteBook 8760W are pests consuming system resources, you just enable "Software Framework" when occasional issues emerge with HP softupdate (typically no issues) & redisable after use, rest of services are bloatware - some attempt to overrun Windows Wireless console, some seekout HP Networked printers (Ethernet, Wireless, but not USB), some do this & that - I study/know which one does what and decided to disable all. This is called a "minimalist" philosophy & turns your machine into a fast beast, I recently sold a very obsolete 4-year laptop which however handles 3DMCAD & complex designs/simulations, better new machines out fo a store, as new machines are loaded w/bloatware chocking down resources.
BUT nobody is requiring you to disable anything though.
The solution merely states the fact:
These 2 (or 1) services when not running halt BIOS Update "within Windows" (you can still run "BootDisk option", however, if preferred).
Simply restartung them solves your problem. Usually
Ya'll have a good day and enjoy!
===========
BELOW ARE IMPORTANT WARNINGS:
1) IF YOUR BIOS UPDATE STILL FAILS, SOME OTHER PIECE IN WMI SUPPORT IS MISSING - IN MY CASE WAS THESE 2 SERVICES, BUT THERE'S REMOTE POSSIBILITY SOMETHING ELSE MIGHT BLOCK UPDATER. DON'T WASTE TIME & CHOOSE "USB/BootDisk" options instead
2) Once BIOS updater does its job, will ask to auto-restart - let it go on & complete, it will self-shutdown (click "Next" to skip 60-second timer), then do NOT turn it on manually!, wait - it'll turn on by itself in 15 seconds, let it boot into Windows, you're done!
3) WARNING: close other apps before proceeding, be 100% sure your ACpower won't be interrupted or better yet - make sure battery is in/charged (so if ACpower accidentally disconnects, you're autoswitched onto battery) b/c power loss may result in severe damage to internal hardware. In the old days it'd result in fatal damage, these days powerloss would still result in a major repair (ROM chip corruption).
So to summarize: those 2 services I specified, are often responsible for whether HPQ/ROMpaq will or won't run.
Other causes possible, but I've not witnessed; and if so - choose BootDisk option.
===
Stan M. Starinski, MSEE.

Hello Ceramics.
Your ProBook is an Enterprise model. It would be a good idea to also post your question to the HP Business Boards as those forums deal specifically with that kind of product. Here is a link.
Have a great day!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

I have just upgraded from Elements/Premiere elements 11 to version 12. I am running on a PC with Windows 7. When I try to run video from the existing catalogue or video newly imported I get a window stating "....system does not have the required compresso

I have just upgraded from Elements/Premiere elements 11 to version 12. I am running on a PC with Windows 7. When I try to run video from the existing catalogue or video newly imported I get a window stating "....system does not have the required compressor/decompressor (codec) installed" Where has it gone? Where do I get a new one? I am getting REALLY REALLY fed up with trying to find an answer!!!!!!!!

Try to disable hardware acceleration in Firefox.
*Firefox > Preferences > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

I keep getting this error message "Your operating system does not support the 64-bit version of Silverlight" even though I have a 64 bit system?

Netflix requires Microsoft Silverlight plug in to view their videos. Every time I try to load it I get the following error message...Your operating system does not support the 64-bit version of Silverlight. I have a 64bit system with Windows Vista Home Premium. Firefox 33.0 is installed.
Any suggestions?

Your User Agent: Mozilla/5.0 (Windows NT 6.0; '''WOW64'''; rv:33.0) Gecko/20100101 Firefox/33.0
As said Firefox for Windows from mozilla.org is a 32-bit application. The WOW64 in UA means it is a 32-bit application on 64-bit Windows.
Before you ask if there will be a Win64 version of Firefox. If all goes well the first phase of having Win64 for Release may be as early as Firefox 37.0
https://wiki.mozilla.org/Firefox/win64

Hide a type of file System wide not just the extension*

Is it Possible & if So Howto hide a type of file System wide not just the extension*
Am trying to HIDE the Associated file for Photo Processing software in Finder, its a Specific file to the Program & holds the Raw data text Processed Info
. Would mean I would need to change each File individually
Is there a way/apple script?
Knowledge or experience would be Appreciated
Thanks

I followed these instructions and they work, but I also get errors. Here are two files in the directire, and the contents of ~/.profile, I called the function killextension:
I run the command to hide the PDF:
Note the two errors. Thank you very much, BTW. No more Dropbox attributes files!

WM::system is not placing the stock another storage bin

Similar Messages

Maybe you are looking for