Wm with qm interface  when the gr the quant is merging

hi gurus.
Store do GR, Material route for QA Inspection.  After QA Usage Decision
make, WM post change number generated.  Material will be at 922-TR Zone
interim area pending for post change to be completed.
When there is another GR, QA Inspection and Usage Decision done for the
same material(i.e. where there is same material existing in 922 interim
area), system will assigned the same quant for the material.  This
causes error while store trying to complete the post change for the
second material who having the same quant.
can anybody help me to solve the isssue.
thanks inadvance.

Hi Jürgen L..
thanks for your answer  the oss note wm-qm issue
i applied according to the oss note  the setting in the storage type activated dynamic bin in the strategy field and deactivated the addtional to stock  , then at the time of gr and transferring material to the warehouse and uasage acceceptence taken and  through this dynamic bin strategy the system creating bins  and quant number , when another gr is done the system creating another bin and another quant ,
but here user wants to put the stock in to the same bin instead of differentbins and the quant should be different .
can anybody  help me to solve the issue .
thanks in advance

Similar Messages

  • Is there a way to open a new window with one site when the home setting on Firefox has multiple websites?

    While working in Firefox is there a way to open a new window with one site when the home setting on Firefox has multiple websites?

    I guess I'm not explaining myself fully. I have a home page designation in firefox preferences that starts firefox up with 5 sites. that pretty fills up my screen with tabs.
    At some point I want to initiate another WINDOW in firefox (NOT a tab). I would like to be able to open up a window that ONLY has ONE tab, or as if there were only one site designated as the home page. This gives me a workspace that has my most useful sites available in tabs in one window, and also another WINDOW that I can move around in and even create more tabs without messing up my primary set of TABS (in my primary window). I see how this might not be doable without doing what I do now, which is open up a new window, and then close tabs until the new window just has one tab for me to work from.

  • Hi BC, I have an issue with BC. When the shopping cart is used it takes stock out of inventory and h

    Hi BC,
    I have an issue with BC. When the shopping cart is used it takes stock out of inventory and holds it, regardless of whether or not a customer proceeds to purchase. OK.
    To make matters worse, the stock is only cleared from the shopping cart when the customer closes the browser - not when they close the shopping window.
    Now lets say a customer doesn't close their browser for a month - it happens! .. when their stock is finally returned it may throw out our stock levels that have in the meanwhile been adjusted. So their stock will be added on top of an accurate stock take, putting stock in that isnt really available.
    This is causing us mayhem.
    We have not yet seen if stock is actually returned at all. In the test we did today where we filled a shopping cart then closed the browser without making a purchase, the stock was not returned immediately. So we dont even know when it will be returned - thats IF a customer actually closes their browser. Any solutions out there?
    Jo

    Hi there,
    The way stock is managed in this situation is desirable for many in that case otherwise shopping on a site and adding to cart would not be viable or use friendly.
    What you mention about not closing a browser though is a case that is not true. IF you go into the shop settings in the admin you can see the cart restore timer which is by default 24 hours but you can change this to as low as 1 hour if you wish.

  • What do I do with my laptop when the shutdown keeps popping on the screen?

    What do I do with my laptop when the shutdown keeps popping on the screen?

    Intel-based Macs: Resetting the System Management Controller (SMC)

  • No video signal in remote connection with Mac mini when the display is off

    No video signal in remote connection with Mac mini when the display is off

    So you mean that Mac mini is different than other ordinary computer and is need an active display to avoid black screen in remote session!!!!!Oh my god, Steve would be embarrassed!

  • How to automatica​lly disable the wireless interface when the LAN interface is connected

    Hi,
    Is there a way to automatically disable the wireless interface when the LAN interface is connected on  R61s and X61s?
    Thank you!

    Hi,
    Thanks for the answer. I'm trying to deploy the profile that I've created on all my laptops. But i'm facing an issue for a while.
    When the profile is deployed on a laptop, Access Connections finds a new ethernet port and asks to assign it a profile. But the problem is that Access Connection don't allow me to assign it to my wired profile, only to my wireless profile and that doesn't make sens to me. Besides, it is written in the dialogue box that ethernet profiles are disable for the match of the new port...
    Is there any way to assign the new port to the new profile without human interaction or just how to make the wired profile available when access connection is launched and find a new ethernet connection
    Thanks in advance!

  • Timesten replication with multiple interfaces sharing the same hostname

    Hi,
    we have in our environment two Sun T2000 nodes, running SunOS 5.10 and hosting a TT server currently in Release 7.0.5.9.0, replicated between each other.
    I would like to have some more information on the behavior of the replication w.r.t. network reliability when using two interfaces associated to the same hostname, the one used to define the replication element.
    To make an example we have our nodes sharing this common /etc/hosts elements:
    151.98.227.5 TBMAS10df2 TBMAS10df2-10 TBMAS10df2-ttrep
    151.98.226.5 TBMAS10df2 TBMAS10df2-01 TBMAS10df2-ttrep
    151.98.227.4 TBMAS9df1 TBMAS9df1-10 TBMAS9df1-ttrep
    151.98.226.4 TBMAS9df1 TBMAS9df1-01 TBMAS9df1-ttrep
    with the following element defined for replication:
    ALTER REPLICATION REPLSCHEME
    ADD ELEMENT HDF_GNP_CDPN_1 TABLE HDF_GNP_CDPN
    CHECK CONFLICTS BY ROW TIMESTAMP
    COLUMN ConflictResTimeStamp
    REPORT TO '/sn/sps/HDF620/datamodel/tt41dataConflict.rpt'
    MASTER tt41data ON "TBMAS9df1-ttrep"
    SUBSCRIBER tt41data ON "TBMAS10df2-ttrep"
    RETURN RECEIPT BY REQUEST
    ADD ELEMENT HDF_GNP_CDPN_2 TABLE HDF_GNP_CDPN
    CHECK CONFLICTS BY ROW TIMESTAMP
    COLUMN ConflictResTimeStamp
    REPORT TO '/sn/sps/HDF620/datamodel/tt41dataConflict.rpt'
    MASTER tt41data ON "TBMAS10df2-ttrep"
    SUBSCRIBER tt41data ON "TBMAS9df1-ttrep"
    RETURN RECEIPT BY REQUEST;
    On this subject moving from 6.0.x to 7.0.x there has been some changes I would like to better understand.
    6.0.x reported in the documentation for Unix systems:
    If a host contains multiple network interfaces (with different IP addresses),
    TimesTen replication tries to connect to the IP addresses in the same order as
    returned by the gethostbyname call. It will try to connect using the first address;
    if a connection cannot be established, it tries the remaining addresses in order
    until a connection is established.
    Now On Solaris I don't know how to let gethostbyname return more than one interface (the documention notes at this point:
    If you have multiple network interface cards (NICs), be sure that “multi
    on” is specified in the /etc/host.conf file. Otherwise, gethostbyname will not
    return multiple addresses).
    But I understand this could be valid for Linux based systems not for Solaris.
    Now if I properly understand the above, how was the 6.0.x able to realize the first interface in the list (using the same -ttrep hostname) was down and use the other, if gethostbyname was reporting only a single entry ?
    Once upgraded to 7.0.x we realized the ADD ROUTE option was added to teach TT how to use different interfaces associated to the same hostname. In our environment we did not include this clause, but still the replication was working fine regardless of which interface we were bringing down.
    My both questions in the end lead to the same doubt on which is the algorithm used by TT to reach the replicated node w.r.t. entries in the /etc/hosts.
    Looking at the nodes I can see that by default both routes are being used:
    TBMAS10df2:/-# netstat -an|grep "151.98.227."
    151.98.225.104.45312 151.98.227.4.14000 1049792 0 1049800 0 ESTABLISHED
    151.98.227.5.14005 151.98.227.4.47307 1049792 0 1049800 0 ESTABLISHED
    151.98.227.5.14005 151.98.227.4.48230 1049792 0 1049800 0 ESTABLISHED
    151.98.227.5.46050 151.98.227.4.14005 1049792 0 1049800 0 ESTABLISHED
    TBMAS10df2:/-# netstat -an|grep "151.98.226."
    151.98.226.5.14000 151.98.226.4.47699 1049792 0 1049800 0 ESTABLISHED
    151.98.226.5.14005 151.98.226.4.47308 1049792 0 1049800 0 ESTABLISHED
    151.98.226.5.44949 151.98.226.4.14005 1049792 0 1049800 0 ESTABLISHED
    Tried to trace with ttTraceMon but once I brought down one of the interfaces did not see any reaction on either node, if you have some info it would be really appreciated !
    Cheers,
    Mike

    Hi Chris,
    Thanks for the reply, I have few more queries on this.
    1.Using the ROUTE CLAUSE we can use multiple IPs using priority level set, so that if highest priority level set in thr ROUTE clause for the IP is not active it will fall back to the next level priority 2 set IP. But cant we use ROUTE clause to use the multiple route IPs for replication simultaneously?
    2. can we execute multiple schema for the same DSN and replication scheme but with different replication route IPs?
    for example:
    At present on my system, I have a replication scheme running for a specific DSN with stand alone Master-Subscriber mechanism, with a specific route IP through VLAN-xxx for replication.
    Now I want to create and start another replication scheme for the same DSN and replication mechanism with a different VLAN-yyy route IP to be used for replication in parallel to the existing replication scheme. without making any changes to the pre-existing replication scheme.
    for the above scenarios, will there be any specific changes respective to the different replication schema mechanism ie., Active Standby and Standalone Master Subscriber mechanism etc.,
    If so what are the steps. like how we need to change the existing schema?
    Thanks In advance.
    Naveen

  • PowerShell: How do I reliably set the IP address on an interface when the interface is not connected ?

    Hello all,
    I am in a bit of a bind - no pun intended.  I would like to know how to reliable set the persistent IP address of an interface that may be disconnected when the address is set.  I can set an address and it will be stored in the ActiveStore but
    that does not really help if I need it next time I reboot.  I have tried using netsh and WMI but they don't seem to create a persistent address on the disconnected interface.  Now if I us ncpa.cpl I can do it all day long so it must be possible.
     In fact if I do it that way the registry settings change. So, I figured I would go that route (modifying the registry) but, alas, that does not work either - upon reboot the address shown in the interface properties show a blank IP address, gateway,
    and netmask.  It is interesting that it is using a static address though. 
    Thanks for your help
    Robert
    Robert Thompson

    Look in the Gallery for numerous examples of setting a static address on an interface.
    http://gallery.technet.microsoft.com/site/search?query=static&f%5B2%5D.Value=static&f%5B2%5D.Type=SearchText&f%5B0%5D.Value=networking&f%5B0%5D.Type=RootCategory&f%5B0%5D.Text=Networking&f%5B1%5D.Value=clientside&f%5B1%5D.Type=SubCategory&f%5B1%5D.Text=Client-Side%20Management&ac=2
    ¯\_(ツ)_/¯

  • How to query from view with parameter, only  when the JSP-page loading

    I use JSF/ADF BC, create two viewes:view1 and view2, in the JSP page the user press a button to query from the view1, but I hope the view2 can be queried only when the page loading, it have no relation with user-operator, and pass the column value of view2 into some variables, the view2 return one record.

    Hi -
    You may want to have a look at this other thread:
    Re: Execute ViewObject with Parameters at JSF Page Load?  JSF/ADF/BC 10.1.3
    John

  • Issue with Selection Listener when the table has only one row

    Hi All ,
    I have developed a table in which I am using Selection Listener to perform some task when any row is selected.
    It is working fine when I have more than 1 row in the table, but when I have only one row in the table , the selection listener do not call the corresponding method in bean.
    I understand that selection event will be raised only when the row is changed, but in the use case when only one row is there, what should be done to make the selection listener work ?
    In the selection listener I have written code to make the selected row as current row , and perform the required task.
    Please suggest a way out for this situation.
    Thanks in advance.

    Hi,
    try removing this attr from table
    selectedRowKeys="#{bindings.xxx_VO1.collectionModel.selectedRow}"

  • After installing 11.2.2.3 iPod Classc. is wiped/"dead" (not recognized by iTunes, Win7 find the unit in explorer) and my iPod Touch refuse to comm with iPod interface in the car. Just wait for a iTunes update?

    Hi,
    I installed 11.2.2.3 2 days ago and have since then not been able to sync my iPod Classic (not recognized by iTunes anymore and alll data has been wiped but show up in Win explorer when in Disk mode with my label on it "Nik's iPod") my old iPod Touch appear to have all data left but doesn't communicate with my car anymore.
    Nedless to say none of the other Apple devices in our house will be updated or connected until this is resolved.
    Is this related to the iTunes update?
    If so should I just wait for a new update to come out that can help me get these things sorted?
    I have tried most of the different remedies listed in this forum to no avail and being computer illiterate (not comepletely but anyway) I just want to know if this is a known problem that I can successfully fix with a bit of fiddling or if its time to seek out a genius bar somewhere and get some help.
    Nik

    Hi Jeff,
    Thanks for the help but I am unfortunately still not able to get my iPod Classic to connect. I have tried all the tricks in the article that you linked to.
    One thing is that when I reset the iPod (menu and center until the logo pops up) I get a critical error in iTunes and it shuts down. Could that indicate that my problem is with the iTunes installation rather than the iPod?
    I have tried to re-install iTunes before but maybe I shpuld give it  a go again?
    Brgds,
    Nik

  • How to deal with SP Apps when the SP farm is in a different AD domain?

    I have a situation here where we have two AD domains, production and test.  My laptop (that I do most of my work on) is on our production (MYCOMPANY) domain, and my SP2013 farm is in the test (TESTMC) domain. The DNS is set up as mycompany.com and test.mycompany.com.
     I have a personal account in the production domain, a personal account in the test domain, and I have set up a generic SP Admin account in the test domain. (My personal account is also a farm admin and site collection admin.)
    I think I have set up the app infrastructure correctly (app domain in DNS is "spapp.test.mycompany.com", etc.), and apps seem to work, but I was running into the issue of the app config page and app parts prompting for credentials when they load
    on a page. So I followed the advice I found online and added the app domain to my local Intranet sites in IE internet settings.
    Now what's happening is that the app parts and app configuration pages say
    "Sorry, this site hasn't been shared with you."
    I'm logging in to my laptop with my production domain credentials, but when I go to the SP site I'm logging in with my test domain credentials. If I take the app domain out of my Intranet sites, and force the second credential check, and use the test domain
    credentials, everything seems to work. So I'm guessing that what's happening is that with the app domain included in the Intranet sites, my production domain credentials are getting passed on to the app.
    Am I right in my assumption? What's a good way to deal with this? I've had previous experiences that led me to believe SP would use the credentials you logged in to the site with (in this case, my test domain account), which are associated with the browser
    session, and not default to the credentials you are logged in to the machine with.
    In addition, it seems like anything opening from the app domain gets stripped of all the SharePoint bits. Here's a screen shot of an app configuration page in a working environment:
    And here's a screen shot of the same app configuration page in my environment:
    Does anyone have any idea what's going on here?  Where should I be looking to fix this?
    Dylan Cristy | MCTS SharePoint 2010 Application Development
    Blog: morefunthanapokeintheeye.blogspot.com

    Note that it is not recommended to place the SharePoint Apps DNS zone in the Intranet Zone of IE, as SharePoint Apps (from 3rd parties, at least) should be potentially dangerous as they may contain XSS vulnerabilities.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • HT201412 i updated my i pad 4th gen with ios 8 when the upload finished it kept turning itself off a few weeks later i did a update and now wont turn on i have tried to restore and recover but freezes any suggestions thanks Rick

    Hi i have a ipad 4th gen i updated to ios 8.0 after it installed it kept turning itself off. A few weeks later i installed a update for ios it turned itself off and wont turn back on. I have tried  plugging it into itunes to restore it recognizes the ipad when i press recover it just freezes and wont restore or recover its just a blank screen there is no power light or anything just blank please help with any suggestions, Thanks Rick.

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                     
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • [solved] Arch linux access point with multiple interfaces for the NAT

    Hi, I have a router running Arch linux. It is connected via LAN (let's call it eth0) to the internet. It has a second LAN interface, eth1, and a wireless interface in master mode, wlan0.
    Now, Everything works perfectly except providing network connectivity on eth1 and wlan0 simultaneously. I followed the guide in the "Internet share" wiki article and use dnsmasq/hostapd for the AP. It appears as if all traffic from the router is sent to the wlan0 interface, even if it came in through eth1 (for example, dhcp requests). I cannot really find information how to solve this. The words "bonding" and "iptables" are floating around, but there is not really an easy to understand tutorial for this.
    What do I need to do to use both the eth1 and wlan0 interface (for different clients!) on my router?
    Best regards, and thank you in advance
    Jan Oliver
    /e: This seems to be my problem: http://www.novell.com/support/kb/doc.php?id=7000318 How do I solve this using the usual iptables? (The way described in the article doesn't work: "RTNETLINK answers: No such process" errors.)
    Last edited by janoliver (2013-09-25 22:24:53)

    Or you could bridge eth1 and wlan0, and make dnsmasq bind/listen on that bridge...

  • What is wrong with apple tv when the blue light flashes quickly

    I am having trouble with my apple tv device.  The blue light flashes continuously and will not reset at all.

    Welcome to the Apple Community.
    You might try restarting the Apple TV by removing ALL the cables for 30 seconds.

Maybe you are looking for