WMA Audio files not compatible with Aperture 3?

Hi,
I just bought a Olympus WS-400S Digital Voice Recorder, to record audio for my audio slideshows that I will be using Aperture 3 to make, I cant seem to import these files into iTunes either.
Is Aperture 3 compatible with WMA audio files?

Thomas Photo wrote:
Hi,
I just bought a Olympus WS-400S Digital Voice Recorder, to record audio for my audio slideshows that I will be using Aperture 3 to make, I cant seem to import these files into iTunes either.
Is Aperture 3 compatible with WMA audio files?
Hi Thomas,
Does not look like it....list of compatible formats is here...
http://support.apple.com/kb/HT4025
Sincerely,
K.J. Doyle

Similar Messages

Can't open file--"not compatible with this version"

I can not open a photoshop file, although it was saved with the same version. "The file is not compatible with this version" can someone help me.
thanks

hi kirsti
I use windows 7 and photoshop cs5
thank you
Am 02.05.2012 19:06, schrieb Kirsti Aho:
>
Re: Can't open file--"not compatible with this version"
created by Kirsti Aho <http://forums.adobe.com/people/Kirsti-CA> in
/Community Help Application/ - View the full discussion
<http://forums.adobe.com/message/4374618#4374618

Photoshop CS2: "file not compatible with this version of Photoshop" error

So, I've been working with Photoshop for almost 20 years now, and lately I've been getting this error message on occasion (but not on every file) when I go to open a file I worked on just yesterday: "Could not complete your request because the file is not compatible with this version of Photoshop." I just worked on it yesterday in Photoshop. The file was saved as a PSD, and when I attempt to open it through Painter IX, that program tells me that it's not a Photoshop document. Why can't I open this file anymore, and why is it giving me this error message when I don't have Norton AntiVirus installed, and my 'maximize PSD and PSB file compatibility' is set to 'always'??
Does anyone have an idea on how I can open my file? How can I get around this, and how do I prevent it from happening again?
OS: OSX 10.4.11
Photoshop CS2
Info:
Kind: Adobe Photoshop file
Size: 394.4MB
Created: December 13, 2007
Modified: Yesterday at 3:54 PM

This is the boilerplate text I use in connection to saving to a network (please NOTE the part where it explains that normally, it does work, but that it is impossible to troubleshoot someone else's network remotely, and that's why it's not supported by Adobe):
If you are opening files over a network or saving them to a network server, please
cease and desist immediately
in the event you are currently experiencing problems with one or more files.
Working across a network is not supported.
See:
http://www.adobe.com/support/techdocs/322391.html
Copy the
CLOSED file from your server to your local hard disk, work on it, save it again to your local hard disk, close it, and copy the closed file back to the server.
Of course, the fact that Adobe does not support working across a network does not necessarily mean it won't work. It should.
Adobe's position is that there are too many variables in a network environment for them to guarantee that everything will work correctly in every network, especially given the fact that if something does
not work properly, it's probably the network's fault, and Adobe has no way of troubleshooting your network.
If you can't work locally, you are on your own, and if something happens, you're on your own. If you must work from a server, make sure your network administrator is a competent professional.
When problems arise, a lot of valuable work can be lost.

CS6 file "not compatible with this version of Photoshop"

We are using Adobe Creative Suit 6. Yesterday i've created a file, and today i cannot open it with any software. (Bridge shows the thumbnail but the file is corrupted.) I get the "Could not complete your request because the file is not compatible with this version of Photoshop" error. The file contains multiple layers, without any masks. Originally it was a NEF file (Nikon raw). I used vanishing point, because its an interior photo. (it doesnt relevant for the problem) I have an earlier version, where the vanishing points are defined, but the textures are missing. Main question is, how this can be??? I worked on that version for more than 2 hours. The file size is small, it's only 133.579.959 bytes (133 Mb). The image is 4288 x 2848 px, 240 DPI, RGB 8-Bit, Fogra39 ICC profile. The computer is up to date, nor the hw or the softwares are corrupted. The file saved locally, so it's not a network problem. I saved the document, and left the machine for about 15 minutes, then i went back, so the save had to be complete. (on SSD it took about a couple of secs) The biggest problem is, i have to work with a large amount of photos in Photoshop. But after this i have some bad feelings about this job. We have to create these PSD files both for ourselves and for our client for further use. (It's a huge furniture factory) The hardware has 16 gigs of RAM with an Intel i5 operating system Windows 8.1. Any ideas? (ps.: i didnt' find PSErrorlog.txt file) Oh i almost forgot. After installing CS6 my Adobe Acrobat Pro stopped working in about 2 weeks... So. The job is waiting, but we cannot wait for a long time, we gonna loose our biggest client because of a sw error?

You write this is not compatible with this version. Did you install all updates and did you update the camera raw too?

CS3 file not compatible with Photoshop CS4?

My son uses Photoshop CS3 at college. He worked all day on an image (120MB), and saved it on a USB stick. When opening at home with Photoshop CS4, the "Reading Photoshop format" appears, then an error message "Could not complete your request because the file is not compatible with this version of Photoshop."
He has been burned before by a USB stick, but all the other files seem OK.
Is there a solution to this?

^First thing I did was make a copy.
QuickTime Picture Viewer (which seems to open other PSD files) says it is corrupted.
Adobe Bridge can read the metadata, gives no preview, and won't open the file.
Any other thoughts?

File Not Compatible With This Version

I opened and created various files today, and after saving and trying to reopen I get this error:
"Could not complete your request because the file is not compatible with this version of Photoshop."
One of the same files opened just fine earlier, and after opening and making small changes to adjustment layers and resaving, I encountered this error.
I did some searching, and all the causes seem to be related to using large files, Network Storage and Norton Anti-Virus. However, my files are under 2 gb, created locally (not on a Network Drive) on a machine that does NOT have Norton Anti-Virus. Hard drive was replaced on this machine in the last 3 weeks, so it's unlikely that there's an issue with that.
Any other possible explanations? All of the posts I've seen on this topic seem to be related to Smart Object and/or Placed Photo/Video layers. Perhaps it is a Photoshop glitch related to certain types of Smart Objects / Placed Photo/Video layers?
Running:
MacBook Pro Mid-2010
Mac OS X 10.6.4
Adobe Photoshop CS5 Extended Version 12.0.1
8 gb RAM
341 gb free space
Intel HD Graphics & NVIDIA GeForce GT 330M
Thanks!

What you can try..
Create a blank doucument in photoshop .
Try to place the file on that by Goint to File -> Place .
It works if its not a multi layered file.
- Vishal

File not compatible with the version of windows

Already downloaded the file but when I install it says that the file is not compatible with the version of windows. But my PC is windows 7, 64bit

I dowload from several different sites and all give the same message. from the adobe site too.

How do you burn a video file not compatible with quicktime?

Hello all,
I am very new at this so I apologize if the solution is very simple - i just can't seem to work this iDVD thing...
I've searched through the forums and can't seem to find exactly what I need, please point me in the right direction if a solution has already been posted elsewhere.
Okay, so my problem is trying to burn movies to DVD. I don't actually have to use iDVD, but it's the only solution i've come up with. My problem is when I add a movie file (lets say, something that will ONLY OPEN with VLC), and press preview, no movie files show up... but when i put in a video file that will play with quicktime, the preview works fine.
So i suspect the preview wont play because the file is not compatible with quicktime.
have any of you tried this? All i want is to be able to play a downloaded movie on the dvd player downstairs
regards,
Peter

iDvd is not a general burn utility. However, there's a very good chance (whatever that file is) that Toast will burn it to Dvd-R. And if not (which is unlikely) then do as suggested already and use Mpegstream Clip. It's 100% free! However Mpeg 2 playback component may run you a few bucks (if needed).
Or the alternative is to invest hundreds of dollars in Apple software and use apps like FCP and DVDSP (or FCS) along with QT Pro. Nine times out of ten this combination tends to work well ... but it ain't cheap (not to mention a rather steep learning curve).
Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software / products that may be mentioned in this topic. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information above at your own discretion.
Message was edited by: SDMacuser

PS cant open a file I created... "File not compatible with this version of PS"

I built this file on Friday. I tried to open it this morning and now I get this message. "File notr compatible with this version of Photoshop." I've tried restarting. No luck.
Any ideas what would cause this?
Help please!
I have a PC, CS5 (PS 12.0.4 X64)
12 GIGs RAM

From your post I understand that you created this file on the same machine yesterday? Is that correct?
Can you try to open it on another machine running Photoshop or maybe email it to me so I could check it for you?

Audio files not embedding with .avi files in CS4

I am working on a project in Premiere Pro CS4. I successfully captured with firewire a number of clips and the audio embedded with the clip ( one .avi file shows up in explorer under the project. When I went back into the project, first, there was no audio captured at all and I did'nt notice until I had captured half of the clips (45 minutes). I don't know what happened there. Now, the audio is attached to the .avi file, but is not embedded like the previous captured files. Example First capture: File Name : Harlem 01.avi audio is embedded 2nd Capture Guilford 01.avi and Guilford 01. Stereo 1.wav
Why aren't the .avi files and the audio files embedded and combined as one file anymore?
Thanks for any help.
Jimi

>Matrox card
The comment I have often seen is to the effect that "a Matrox card makes a good door stop"
For a Firewire transfer you don't need any "card" at all, only a Firewire port... usually on the motherboard
That said... and you mentioning switching back and forth between different Matrox modes... I would guess that, yes, you selected a wrong option
But, since I don't use Matrox, I have no idea what setting could be wrong (I do use a Pinnacle Dv500 via dual boot with WinXP to digitize some old VHS tapes before they stop playing... but once I had settings that worked to create AVI files that ARE Audio Video Interleave with everything in one file, I have never changed any of the Dv500 settings)

Files not compatible with macbook pro

i have difficulty opening files on my macbook pro, the senders of the files tell me to use windows as their files aren't compatible with apple. is there a way to convert files

If you take a document, and TextEdit can handle some Word files. or if you use Pages (you have to EXPORT) files to Word format.
They are providing an exe is Windows only and read-only that won't run natively on Mac OS.
Not sure what TV has to do with this.
Use Windows 7 and VirtualBox to do your word.

An old question re: "file not compatible with this version of Photoshop"

Hi All. I'm a new member of forum with an old question.
Running:
MAC OSX 10.3.9
G5
Dual 1.8 Ghz
1.5 GB DDR SDRAM
Norton Autoprotect
Nortons Firewall
Antivrus 9.0.4
Liveupdate 3.0.3
CS2
MAC is kept clear of clutter and has plenty of space in all areas. Everything is stored on Xternal HD.
In recent weeks I have been receiving the above error message when trying to open existing CS2 layered files.
I have searched forums including these and tried everything which has been suggested: Shut down Nortons. Worked only from HD. No networks. Tried opening with PS 7 in Classic. IR. Illustrator. Graphic Convertor. Changed to .tif, .tiff.
Opening files with CS is one thing I have not tried, I have not been able to find a version of 8 anywhere to buy or download.
I have not had any success recovering layered files, it seems that once a file has corrupted in this way there is little or no chance of recovery.
Having rebuilt many complex files from scratch I am naturally concerned I will have the same trouble with those. To try and avoid problems my latest files are made up of simple CMYK photographic images in multiple layers - no text, no smart layers, no groups.
But a simple file made yesterday gave me same error message today.
So today I have started saving many versions of the same file, an RGB version (so I can possible open in IR), a different name, a version as a tif, a psd, I'm keeping a version on HD which i am working on, and numerous other versions on a LACIE Xternal HD.
Does anyone have any idea at which point in the process the file actually corrupts? Is it during saving or when sitting on HD, or is it during the opening process? Or is while working on the file?
Some discussions suggest that if you are able to actually open a file, a corrupt layer is found and deleted and this resolves the problem.
If there are a number of saved versions of same file, is it likely that they will all be corrupt or might some be ok?
I am considering upgrading to a new, more powerful MAC and a later version of PS. Does the same error crop up on these later versions? Most of the forum discussions go back a couple of years so does that mean some of these issues have been resolved in recent months?
I imagine that it may be the opposite, ie, the more complex the programme becomes and the more virus protection etc we put on our MACS the more likely there will be problems.
A lot of questions (and line spacing!), for which I apologise, but any thoughts or up to date comments would be very welcome.
Thanks
Paul

i havent had nortons running for sometime to try and avoid this ps
problem and although i cant really be sure there dont appear to be have
been any virus problems.
except of course the ps error. which is occurring with or without
nortons turned on. i may uninstall it and see if that helps.
bearing in mind that i am not working over networks do you think this
issue is a ps bug pure and simple or as a result of some combo of other
programme such as nortons affecting ps. in other words would a mac only
running ps still encounter the same errors?

Error when opening a file "not compatible with this version"

I am getting an error that says that it cannot open the file with this version of Photoshop, yet it was created with that version before my computer died and I had to reinstall everything. Now I cannot open this file with Photoshop CS6 64 bit.

What you can try..
Create a blank doucument in photoshop .
Try to place the file on that by Goint to File -> Place .
It works if its not a multi layered file.
- Vishal

Are Adobe Captivate swf files not compatible with IE8 or IE9 when inserted into RoboHelp projects?

Hi,
I've published Adobe Captivate swf files and then inserted them into my RoboHelp project. I then synced my RoboHelp project with our website and the videos within online help are not functioning in IE8 or IE9. They are only working in IE11.
Thanks,
Jaimie

Hi there
When a SWF plays in IE, it uses the Flash Player ActiveX control. I'm not 100% sure that different versions of IE would share the install. So if you have one version of IE on your machine, perhaps it either doesn't even have the control added in or it's the wrong version.
One thing I would check in the browsers where the content seems to be missing is to right-click the blank area and see if you coax a Flash pop similar to below:
Then note the version number.
You may find that all that you (or others) need to do is ensure you have at least a specific version of the player/add-in installed.
Cheers... Rick

Sony WX1 Videoformat not compatible with Aperture 3

Hi,
my daughters brandnew Sony WX1 Videofiles seem not to be accepted by Aperture.
Anyone an idea, what to do, may be there is a workaround ? Will iphoto work ?
The file format of Sony WX1 for HD Video is MPEG-4 Visual.
Thanks in advance,

Not every format is supported. What file suffix do these have? As for iPhoto, why not try and see?
Regards
TD

WMA Audio files not compatible with Aperture 3?

Similar Messages

Maybe you are looking for