WMI - namespace is marked with RequiresEncryption Flag

Environent
1) One Remote Desktop Server hosting applications
2) One RDS server performing gateway services
Both servers are Windows 2008 R2 SP1.
ISSUE
Event Log Error: 5605
Source: Microsoft-Windows-WMI
Error:
The root\cimv2\TerminalServices namespace is marked with the RequiresEncryption flag. Access to this namespace might be denied if the script or application does not have the appropriate
authentication level. Change the authentication level to Pkt_Privacy and run the script or application again.
Attempted Resolutions:
1) checked that Web Access Computers exists in wmimgmt.msc, properties, security, cimv2, terminal services with default permissions of Execute methods-enable accounts/remote enable
options are checked. THEY ARE
2) The seesion broker computer (gateway server) is also listed.
Done web searches but not finding answer
Any ideas?

I have a
similar problem. Envirement:
1. One Remote Desktop Server hosting application(Server
2008 SP2 x64 all updates)
2. One RDS - gateway service and
web-publishing service (Server 2008 R2 SP1 all updates)
only the first server has a error:
Event Log Error: 5605
Source: Microsoft-Windows-WMI
Error:
The root\cimv2\TerminalServices
namespace is marked with the RequiresEncryption flag. Access to this namespace might be denied if the script or application does not have the appropriate authentication level. Change the authentication level to Pkt_Privacy and run the script or application
again.
I do not understand how you resolved your problem

Similar Messages

Mail Marked with Quick Flags (follow up) in Outlook, Tasks - TO-DO LIST - Not SYNCING

This question goes for Outlook 2003 and Outlook 2007
I'm currnetly using outlook 2007
In Outlook I store mail marked with "quick flags" (follow-up). Outlook shows theses flagged emails under Tasks \ To-Do List. To-Do list is under TASKS in outlook, but does not sync with Blackberry.
I use Desktop Manager 4.7 to synchronize outlook and my blackberry curve 8330 (calendar, memos, tasks and contacts). The behaviour of task synchronization makes that only task appears on my blackberry but not the flagged mails.
I guess what i'm asking, is it possible to synchronize the complete outlook to-do list with my blackberry?

Outlook already provides that feature (depends on the version of Outlook I guess) :
https://www.officecalendar.com/news/2006April4_convert_emails_to_appts.aspx
otherwise there is a macro that does the same :
http://www.paraesthesia.com/archive/2007/07/10/convert-an-outlook-message-into-a-task.aspx
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Marked with Deletion Flag reflecting in reports...

Hi All,
We have created many reports and sqvi querys, After marked deletion flag for material it is reflecting in reports and queries. What will be reason and how it will be avoid in reports.
Yusuf

Hi,
This is just one of the problems with writing custom reports. They have to consider things like deletion flags, delivery completed flags, special stocks etc.
There is no simple answer other than to correct the custom reports and get them to check all relevant flags.
Better still, try to use std SAP reports wherever possible, avoid creating new reports just to reformat the data slightly or to produce reports that are "nice to have" rather than actually required (I am not saying this is what you have done)
Steve B

How to close Purchase Order and mark to deletion flag.??

Hi,
We need to close all Open POs(For archiving, some old data) through a report.
Considering .....
                   1. PO-GR-IR
and              2. STO-Outboundelivery-PGI-IBD-PGR
Checked few threads, though useful but still more information required.
-> Preprocessing program for archiving standard object MM_EKKO 'RM06EV47' is helpful.
-> Example we have four POs p1,p2,p3 and p4.
P1,p2 has deletion flag as 'L' so will be filtered out with
SELECT ebeln    FROM ekko INTO TABLE lt_sekko
    WHERE ebeln IN er_ebeln
      AND ekorg IN er_ekorg
      AND bstyp IN er_bstyp
      AND bedat IN er_bedat
      AND bsart IN er_bsart
      AND ekgrp IN er_ekgrp
      AND loekz <> 'L'
      ORDER BY EBELN.
For P3 has GR .
P4 has to be marked for deletion flag.
Regards
Mohinder Singh

Hi Thanks for the reply. I checked with that bapi too. I used some part of standard code and then manipulated. Will shorty paste the code on to SDN as its general one and may be used by others.It still under testing.
Edited by: Mohinder Singh Chauhan on Feb 20, 2009 4:07 AM

SCCM Right Click tools , cannot connect to the WMI namespace

Hi All,
I think you all know the right click tools for SCCM, there's a strange problem at my SCCM environment, when I use right click tool to push user policy it said "cannot connect to the WMI namespace on PC01.." , but other
policy like machine it works fine. If I manually initiate from PC01 it works also.
Already uninstall and install the right click tools, restart the server, but still no luck, any ideas ?
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Remote user policy request; I don't use the right-click tools, so I don't know what the code inside looks like. But from past experience, getting the remote user policy refresh to work right was tricky.
First question though: do you actually need to remote user policy refresh? Do you currently deploy advertisements to collections, where the collection membership is either a bunch of usernames, or is a single entry of a domain usergroup? If you
don't currently deploy to users or users in a usergroup, you really don't need to trigger a remote user policy refresh. There's nothing to find anyway, from the client to the management point.
If you do deploy to users or users in a usergroup; you might want to get a copy of Roger Zanders' Client Center, and see if that remote trigger for user policy works.
Standardize. Simplify. Automate.

Some songs on iTunes have swears in them but are not marked with an "EXPLICIT" sign. Is there a possible way for you to fix this? And is there some way for me to send a list of songs that I have come across so that customers know what they're buying?

Here is a list of songs on iTunes that I have bought that need to be marked with an explicit sign:
Maroon 5:
"Harder to Breathe"-Songs About Jane
Goo Goo Dolls:
"Don't Beat My *** (With a Baseball Bat)"-Goo Goo Dolls
"Up Yours"-Jed
"James Dean"-Jed
"There You Are"-Hold Me Up
"Out of the Red"-Hold Me Up
"Lucky Star"-Superstar Car Wash
"Close Your Eyes"-Superstar Car Wash
"Only One"-A Boy Named Goo
"Cuz You're Gone/1000 Words"-Live in Buffalo, July 4th
"Slide"-Live in Buffalo, July 4th
Avril Lavigne:
"Push"-Goodbye Lullaby
"Wish You Were Here"-Goodbye Lullaby
"Smile"-Goodbye Lullaby
"My Happy Ending"-Under My Skin
Aerosmith:
"Mama Kin"-Aerosmith
The Cult:
"Lucifer"-Choice of Weapon
Green Day:
"Burnout"-Dookie
"Having a Blast"-Dookie
"F.O.D."-Dookie
"Brain Stew"-Insomniac
"Jaded"-Insomniac
Linkin Park:
"Wretches & Kings"-A Thousand Suns
P!nk:
"Can't Take Me Home"-Can't Take Me Home
Here's one song that SHOULDN'T have a sign on it:
"Before the Lobotomy"-Green Day

This can be done easily with ethernet.
Please follow the instructions strictly.
To make it easier I want you to do this overnight so you can turn off all your current connection to the internet.
Just go to the airport fan in to the top right and turn airport off.
Get ethernet cable and connect the laptop to the TC lan port.. ie <-> ones.
Press and hold the reset on the TC for about 10sec. until the front led flashes rapidly.
Open the airport utility.. go to manual setup and change the wireless to off. (so other people around you cannot join your network of one).
Ignore all the errors.. they won't stop the backup working.
Go to the TM and reselect the backup target disk as the TC.
It should start after 2min and run through to completion.
That is it.. for a backup of many GB it might take a few hours.. so make sure the laptop has power plugged in and the sleep is off.. (on early ones I think this is needed but I am a late arrival to the scene).. sleep doesn't affect later OS.

HT4718 I have nothing on my Mcintosh HD after trying to install Mavericks. I did save a recovery copy of files however this was also lost. All I now have is a file with a question mark with nothing else happening. What should I do?

Apple recently sent a message asking me if I would like to upgrade to Mavericks which was free. I considered installing after saving a copy of my HD to a WD external drive. I proceeded with the instalation however when it was time to reboot the programme the computer displayed a message that it could not process the request due to errors with the hard drive. The computer then requested that i save a copy and the verify disk and repair disk which i followed and the computer would not repair due to an error. At which pioint I did some research and was told by the IMac to push shift when it starts to enter disk utility and repair the Mcintosh HD. I did as asked however the computer would still not install with Mavericks.
So after many attempts of trying to start over, I was prompted to erase the Mcintosh HD and reboot using the saved copy. At this point all data was lost and all that is left on my computer is a file with a question mark with no way of restoring the HD drive. Could anyone help please?

It sounds like your HD may have died.
If you could answer a few questions it may help figure out what you should do next:
What OS did you have on your computer before you tried to upgrade to mavericks?
Did your computer originally come with installer disks?

How is it possible that i can play music marked with the cloud icon in the music app when i'm not subscribing to itunes match?

When I'm on the same WiFi network as the computer I sync my iPhone to, I can se a lot of songs in my music app marked with the little cloud icon. And when I leave the network, I can see only the songs with this icon that I have played and therefore probably cached.
Where can I read more about this function and get to know it better?
It seems to work like iTunes Match, only limited to 'local' use. I'm not an iTunes Match subscriber, but I have the 'Show all music' setting enabled.
It's a cool function, both it's a bit annoying that i uses up my available storagecapacity. I keep getting warnings that my storage is almost full.
Does the cached music automatically dissapear since i haven't added it while syncing?

This feature is called...
iTunes in the Cloud
It uses no storage on your phone or any in your iCloud storage allocation.

How to create an infoobject with a flag kind of data?

Hi Everyone,
How do you create an infoobject with a flag kind of data? Like YES or NO.
Will it have Master Data or just the Text?
It will not have any hierarchy or anymore attributes?
Should I select the DataType as CHAR or something else?
Thanks

Pl check the following objects from the contens:
1. 0ACCDEBCRED
2. 0ABCKEY
Ravi Thothadri

Arrow mark with kunnr field values in alv output.

Hi ,
I need to increase the column field length. I am using Function Module REUSE_ALV_LIST_DISPLAY because alv_grid display fm is not available in 4.0b version. I have used column optimization in layout. The column kunnr is coming with a small arrow though there is no data loss. Is there any way I can remove the arrow mark with kunnr field values.

Hi,
You can increase your column lenght in fieldcat by using Fcat-columnwidth = "SIZE OF KUNNR ".
Set the size of kunnr field in fieldcat and get the appropiate output.
Regards
Abdul

Hi, I have this green mark (with pointing arrow looks like a link) on some words show on my window screen when I open a web page, I wonder if it is a virus link or such. Need help how to get rid of it. Thanks

Hi, I have this green mark (with pointing arrow looks like a link) on some words show on my window screen when I open a web page, I wonder if it is a virus link or such. Need help how to get rid of it. Here's the example:
WING
GAMES
MAJORITY
Thanks

If the third link you posted (the link containing the word "majority") does not look like the following then you inadvertently installed adware.
That particular page should resemble the following:
The word "majority" in the third paragraph should not be a link and should not have the green icon associated with it.
To learn how this may have occurred, and how to prevent it from occurring in the future, read How to install adware
Most so-called "news" websites are nothing more than entertainment outlets that cater to prurient interests, and contain advertisements that leave the user about three clicks away from installing junk. If you decide to frequent those websites, Safari's "Reader" feature helps minimize that exposure.
Try it:

Unused stored procedure parameters marked with a check mark in crystal reports

Post Author: epowers0213
CA Forum: General
Hello,
I have some Crystal Reports that currently use stored procedures as their datasources (I am in the process of modifying them to use datasets instead). Some of the original reports have check marks next to stored procedure parameters which I cannot find as being used anywhere in the report. Is this a legitimate possibility? (Some of them do not have check marks, however, so it is not consistent.)
More Info: I am using Crystal Reports within Visual Studio 2005. I have looked through each report in every way I can think of to find if a parameter field is being used anywhere - I have checked all formula fields, the formatting formulas for sections and individual fields, the record and group selection formulas and the grouping and sorting experts, along with any subreports (although some of them have no subreports).
(I have read on other forums that exporting a report definition file is another way to look for where fields or parameters are being used, but this does not appear possible within Visual Studio 2005.)
In some cases, I have gone ahead and replaced the stored procedure datasource location with a dataset (generated based on the same stored procedure). When I do this, Crystal automatically deletes the stored procedure parameters from the report, and I have still been able to run the modified report successfully - at least it looks ok and nothing is complaining. So is it possible that these parameters were actually not being used anywhere on the report although they were marked with a check mark?
Any help would be greatly appreciated! I want to make sure I am not changing the function of these reports somehow without knowing it...
Thank you!

Are you referencing another database that Crystal can't see? Also, you can try and copy the SQL to a command object in Crystal to see if it behaves differently there.

Question marks with some audio files

Hello all,
I've been trying to understand the problem I'm having with some audio files of my website, but to no avail. Some audio file are not loaded up with Quicktime, and only show a question mark with a blue "Q" around it.
In other words, would any of you be able to help me find out why the audio files in the following pages do not work:
http://sharon.barnea.free.fr/SharonBARNEA/Music/Entries/2007/4/7_Liszt_Sonata_in_B_minor%2C_S.2.html
http://sharon.barnea.free.fr/SharonBARNEA/Music/Entries/2006/6/23_Mozart_Piano_Concerto_in_C_minor%2C_K._491_i._All egro2.html
http://sharon.barnea.free.fr/SharonBARNEA/Music/Entries/2006/6/23_Mozart_Piano_Concerto_in_C_minor%2C_K._491_iii._A llegretto2.html
http://sharon.barnea.free.fr/SharonBARNEA/Music/Entries/2006/5/8_Bachs_Sarabande_from_Partita_no.2.html
http://sharon.barnea.free.fr/SharonBARNEA/Music/Entries/2004/8/6_Beethovens_Piano_Concerto_no._2_in_B-flat_major%2C _op._19_-_i._Allegro_conbrio.html
Although it does in these other pages:
http://sharon.barnea.free.fr/SharonBARNEA/Music/Entries/2007/10/29_Chopin_Etude_in_C_major%2C_op._10_no.1.html
http://sharon.barnea.free.fr/SharonBARNEA/Music/Entries/2007/9/18_Schubert_Piano_Sonata_in_E%2C_D_157_i._Allegro_ma _nontroppo.html
http://sharon.barnea.free.fr/SharonBARNEA/Music/Entries/2007/9/16_Schubert_Piano_Sonata_in_E%2C_D_157_ii.Andante.html
http://sharon.barnea.free.fr/SharonBARNEA/Music/Entries/2007/4/29_Beethoven_Piano_Sonata_in_C-sharp_minor_op._27_no ._2_-_i._Adagio_sostenuto2.html
http://sharon.barnea.free.fr/SharonBARNEA/Music/Entries/2004/6/8_Bach-Busoni_Chaconne_from_Partita_no._2%2C_BWV1004.html
http://sharon.barnea.free.fr/SharonBARNEA/Music/Entries/2004/6/8_Bach-Feinberg_Largo_from_Trio_Sonata_in_C_major%2C _BWV529.html
I really appreciate your help.

You are giving viewers the full title on your web page.
You could cut your files names like < Beethovens_Piano_Concerto_no._2_in_B-flat_major%2C_op._19_-_i._Allegro_conbrio.html >
to something like BthvnPC2BfM.
Publish to a folder and look in the "Media" folder to see that all your files are there.
A better way to provide a download is to ZIP the music file and link to it via "Link to: A file" in the Link Inspector.
Type "Download" over the file name that appears and select your rollover colors and U or not in the format page.

How do I replace quotation marks with double angle quotation marks, still keeping the word in the mi

Hi,
Does anyone know how to replace quotation marks with double angle quotation marks, still keeping the word in the middle?
For example: I search for a word with quotation marks by typing in: (")(\w+)(") in the "find what" field. What should I type in the "change to" field?
I'd be very grateful for answers!

It's much simpler: find " and replace with " (make sure that 'Use typographer's quotes' is enabled in the preferences).
Peter

XI messages status "Message scheduled on outbound side" with Green flag

Dear,
          On My XI system , i have too old messages and i want to clear those.
          In moni messages status is "Message scheduled on outbound side" with Green flag .
         When i am trying to cancel these messages i am getting a popup saying
          "Cannot cancel message because of it's status"
          And there is no queue entries for these messsage on smq1 or smq2 (perhaps deleted by someone)
          I just want to cancel these messages, please tell me if there is any way .
Thanks in Advance,
Sandeep

Dear Sunil,
                Thanks, these meesages are neither active nor used anywhere,
                Problem is somebody has manually deleted entries for these messages from SMQ1 and SMQ2.
Regards,
Sandeep

WMI - namespace is marked with RequiresEncryption Flag

Similar Messages

Maybe you are looking for