Wmi provider load failure windows 7

I'm really out-of-my element here (and I hope this is the right here). Trying to install the Visual Micro Arduino add-in to Atmel Studio 6.1, with their help we finally got to "wmi provider load failure" on my Windows 7 PC. How do I fix this?
Baby steps, please, and thanks.

Hello,
Thank you for your post.
I am afraid that the issue is out of support range of VS General Question forum which mainly discusses
the usage of Visual Studio IDE such as WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
I suggest consulting your issue on Windows Community:
http://answers.microsoft.com/en-us/windows/forum/windows_7 for better solutions.
Thanks,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

BizTalk admin console error Provider load failure

Hi,
I am facing issue with BizTalk admin console, getting below error,
i thought it will be due to sql server or WMI so restarted sql services as well WMIS services but no luck. restarted Distributed transaction services as well as restarted machine but it did not solve.
TITLE: BizTalk Server Administration
Failed to load Group [AMTROWBT13DV04\AMTROWBT13DEV:BizTalkMgmtDb] data providers. (Microsoft.BizTalk.Administration.SnapIn)
For help, click: http://go.microsoft.com/fwlink/?LinkId=47400&ProdName=Microsoft+BizTalk+Server+2013+R2&ProdVer=3.11.158.0&EvtSrc=Microsoft.BizTalk.Administration.SnapIn.Properties.Errors&EvtID=FailedLoadingGroupProviders&EvtChain=Microsoft.BizTalk.Administration.SnapIn.Properties.Errors+%2cFailedLoadingGroupProviders
ADDITIONAL INFORMATION:
Failed to load Group [AMTROWBT13DV04\AMTROWBT13DEV:BizTalkMgmtDb] data providers. (Microsoft.BizTalk.Administration.SnapIn)
For help, click: http://go.microsoft.com/fwlink/?LinkId=47400&ProdName=Microsoft+BizTalk+Server+2013+R2&ProdVer=3.11.158.0&EvtSrc=Microsoft.BizTalk.Administration.SnapIn.Properties.Errors&EvtID=FailedLoadingGroupProviders
Provider load failure (System.Management)
after looking at event viewer i can see few more error messages,
Faulting application name: mmc.exe, version: 6.3.9600.16384, time stamp: 0x52158765
Faulting module name: KERNELBASE.dll, version: 6.3.9600.17055, time stamp: 0x532943a3
Exception code: 0xe0434352
Fault offset: 0x00011d4d
Faulting process id: 0x215c
Faulting application start time: 0x01d004a6e0c31506
Faulting application path: C:\windows\SysWOW64\mmc.exe
Faulting module path: C:\windows\SYSTEM32\KERNELBASE.dll
Report Id: 3d994be7-709f-11e4-80ee-00505689506c
Faulting package full name:
Faulting package-relative application ID:
Application: mmc.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.Reflection.TargetInvocationException
Stack:
at Microsoft.ManagementConsole.Internal.SnapInMessagePumpProxy.OnThreadException(System.Object, System.Threading.ThreadExceptionEventArgs)
at System.Windows.Forms.Application+ThreadContext.OnThreadException(System.Exception)
at System.Windows.Forms.Control.WndProcException(System.Exception)
at System.Windows.Forms.Control+ControlNativeWindow.OnThreadException(System.Exception)
at System.Windows.Forms.NativeWindow.Callback(IntPtr, Int32, IntPtr, IntPtr)
at System.Windows.Forms.UnsafeNativeMethods.IntDestroyWindow(System.Runtime.InteropServices.HandleRef)
at System.Windows.Forms.UnsafeNativeMethods.DestroyWindow(System.Runtime.InteropServices.HandleRef)
at System.Windows.Forms.NativeWindow.DestroyHandle()
at System.Windows.Forms.Control.DestroyHandle()
at System.Windows.Forms.Control.Dispose(Boolean)
at Microsoft.BizTalk.Administration.SnapIn.Forms.GroupHub.OperationsCtrl.Dispose(Boolean)
at System.ComponentModel.Component.Dispose()
at Microsoft.ManagementConsole.FormView.InternalShutdown()
at Microsoft.ManagementConsole.View.HandleShutdownRequest(Microsoft.ManagementConsole.Internal.IRequestStatus)
at Microsoft.ManagementConsole.View.ProcessRequest(Microsoft.ManagementConsole.Internal.Request)
at Microsoft.ManagementConsole.ViewMessageClient.ProcessRequest(Microsoft.ManagementConsole.Internal.Request)
at Microsoft.ManagementConsole.Internal.IMessageClient.ProcessRequest(Microsoft.ManagementConsole.Internal.Request)
at Microsoft.ManagementConsole.Executive.RequestStatus.BeginRequest(Microsoft.ManagementConsole.Internal.IMessageClient, Microsoft.ManagementConsole.Internal.RequestInfo)
at Microsoft.ManagementConsole.Executive.SnapInRequestOperation.ProcessRequest()
at Microsoft.ManagementConsole.Executive.Operation.OnThreadTransfer(Microsoft.ManagementConsole.Executive.SimpleOperationCallback)
at System.RuntimeMethodHandle.InvokeMethod(System.Object, System.Object[], System.Signature, Boolean)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(System.Object, System.Object[], System.Object[])
at System.Reflection.RuntimeMethodInfo.UnsafeInvoke(System.Object, System.Reflection.BindingFlags, System.Reflection.Binder, System.Object[], System.Globalization.CultureInfo)
at System.Delegate.DynamicInvokeImpl(System.Object[])
at Microsoft.ManagementConsole.Executive.DelegateMessage.OnExecute()
at Microsoft.ManagementConsole.Executive.Message.Execute()
at Microsoft.ManagementConsole.Executive.SnapInThread.DispatchPendingSnapInMessages()
at Microsoft.ManagementConsole.Executive.SnapInThread.OnDataReadyAsync(System.Object, System.EventArgs)
at Microsoft.ManagementConsole.Executive.MmcThreadMessageWindow.WndProc(System.Windows.Forms.Message ByRef)
at System.Windows.Forms.NativeWindow.Callback(IntPtr, Int32, IntPtr, IntPtr)
at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG ByRef)
at System.Windows.Forms.Application+ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(IntPtr, Int32, Int32)
at System.Windows.Forms.Application+ThreadContext.RunMessageLoopInner(Int32, System.Windows.Forms.ApplicationContext)
at System.Windows.Forms.Application+ThreadContext.RunMessageLoop(Int32, System.Windows.Forms.ApplicationContext)
at System.Windows.Forms.Application.Run()
at Microsoft.ManagementConsole.Internal.SnapInMessagePumpProxy.Microsoft.ManagementConsole.Internal.ISnapInMessagePumpProxy.Run()
at Microsoft.ManagementConsole.Internal.ISnapInMessagePumpProxy.Run()
at Microsoft.ManagementConsole.Executive.SnapInThread.OnThreadStart()
at System.Threading.ThreadHelper.ThreadStart_Context(System.Object)
at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object)
at System.Threading.ThreadHelper.ThreadStart()
does any one face similar issue if yes can you please help me to solve this?
Regards,
Amit
Regards, Amit More

here is log generated during configuration,
[2014-11-24 05:16:10:0572 Info Configuration Framework]Configuring feature: WMI
[2014-11-24 05:16:10:0588 Info BtsCfg] Entering function: CBtsCfg::ConfigureFeature
[2014-11-24 05:16:10:0588 Info BtsCfg] Configuring feature: WMI
[2014-11-24 05:16:10:0588 Info BtsCfg] Entering function: CBtsCfg::IsSelectedAnswer
[2014-11-24 05:16:10:0588 Info BtsCfg] Leaving function: CBtsCfg::IsSelectedAnswer
[2014-11-24 05:16:10:0588 Info BtsCfg] Entering function: CWMI::Connect
[2014-11-24 05:16:10:0588 Info BtsCfg] Leaving function: CWMI::Connect
[2014-11-24 05:16:10:0603 Info BtsCfg] Entering function: CWMI::CreateGroup
[2014-11-24 05:16:10:0791 Error BtsCfg] d:\bt\127854\private\source\setup\btscfg\btswmi.cpp(438): FAILED hr = 80041013
[2014-11-24 05:16:10:0791 Error BtsCfg] Provider load failure
[2014-11-24 05:16:10:0791 Error BtsCfg] d:\bt\127854\private\source\setup\btscfg\btscfg.cpp(1801): FAILED hr = 80041013
[2014-11-24 05:16:10:0791 Info BtsCfg] Entering function: CBtsCfg::UnConfigureFeature
[2014-11-24 05:16:10:0791 Info BtsCfg] Unconfiguring feature: WMI
[2014-11-24 05:16:10:0791 Warning BtsCfg] BTS management server or DB names are not found in the registry.
[2014-11-24 05:16:10:0791 Info BtsCfg] Entering function: CWMI::StopHostInstance
[2014-11-24 05:16:10:0807 Error BtsCfg] d:\bt\127854\private\source\setup\btscfg\btswmi.cpp(1553): FAILED hr = 80041013
[2014-11-24 05:16:10:0807 Error BtsCfg] Provider load failure
[2014-11-24 05:16:10:0807 Info BtsCfg] Entering function: CWMI::UnMapHost
[2014-11-24 05:16:10:0807 Error BtsCfg] d:\bt\127854\private\source\setup\btscfg\btswmi.cpp(1698): FAILED hr = 80041013
[2014-11-24 05:16:10:0807 Error BtsCfg] Provider load failure
[2014-11-24 05:16:10:0807 Info BtsCfg] Instantiating IBTSMsgBoxPerformance object
[2014-11-24 05:16:10:0869 Info BtsCfg] Calling IBTSMsgBoxPerformance::UninstallArtifacts
Exception in CounterManager.UninstallArtifacts when uninstalling the perf counter instances. The exception details are:
Source of exception: System
Message: Cannot delete Performance Category because this category is not registered or is a system category.
Stack trace: at System.Diagnostics.PerformanceCounterCategory.Delete(String categoryName)
at Microsoft.BizTalk.MsgBoxPerfCounters.MgmtDbAccessEntity.UninstallInstances(Boolean regularUninstall)
at Microsoft.BizTalk.MsgBoxPerfCounters.CounterManager.UninstallArtifacts(Boolean regularUninstall, String logFileName)
[2014-11-24 05:16:11:0166 Info BtsCfg] Stopping Tracing
[2014-11-24 05:16:11:0166 Info BtsCfg] Entering function: CWMI::DeleteServer
[2014-11-24 05:16:11:0182 Error BtsCfg] d:\bt\127854\private\source\setup\btscfg\btswmi.cpp(1353): FAILED hr = 80041013
[2014-11-24 05:16:11:0197 Error BtsCfg] Provider load failure
[2014-11-24 05:16:11:0197 Info BtsCfg] Entering function: CWMI::UnConfigureGroup
[2014-11-24 05:16:11:0197 Error BtsCfg] d:\bt\127854\private\source\setup\btscfg\btswmi.cpp(1076): FAILED hr = 80041013
[2014-11-24 05:16:11:0197 Error BtsCfg] Provider load failure
[2014-11-24 05:16:11:0197 Info BtsCfg] Leaving function: CBtsCfg::UnConfigureFeature
[2014-11-24 05:16:11:0197 Info BtsCfg] Leaving function: CBtsCfg::ConfigureFeature
[2014-11-24 05:16:11:0213 Warning Configuration Framework]Feature failed to configure: WMI.
[2014-11-24 05:16:11:0400 Info Configuration Framework]Configuration Summaries:
[2014-11-24 05:16:11:0400 Error Configuration Framework]Feature: [Group] Failed to configure with error message [Provider load failure
[2014-11-24 05:16:11:0400 Error Configuration Framework]Feature: [BizTalk Runtime] Failed to configure with error message [Feature is skipped due to dependent feature (Group) failed to configure correctly.]
[2014-11-24 05:16:11:0400 Error Configuration Framework]Feature: [BAM Tools] Failed to configure with error message [Feature is skipped due to dependent feature (Group) failed to configure correctly.]
[2014-11-24 05:16:11:0400 Error Configuration Framework]Feature: [BAM Portal] Failed to configure with error message [Feature is skipped due to dependent feature (Group) failed to configure correctly.]
[2014-11-24 05:16:11:0400 Info Configuration Framework]
Feature: SSOServer,Engine Configuration Enabled: yes
Sub UI: no Configured: yes
[2014-11-24 05:16:11:0400 Info Configuration Framework]
Feature: SSOServer,Engine Configuration Enabled: no
Sub UI: yes Configured: yes
[2014-11-24 05:16:11:0400 Info Configuration Framework]
Feature: WMI Configuration Enabled: yes
Sub UI: no Configured: no
[2014-11-24 05:16:11:0400 Info Configuration Framework]
Feature: Engine,BTSCfg Configuration Enabled: no
Sub UI: no Configured: no
[2014-11-24 05:16:11:0400 Info Configuration Framework]
Feature: RulesEngine Configuration Enabled: yes
Sub UI: no Configured: yes
[2014-11-24 05:16:11:0400 Info Configuration Framework]
Feature: MOT Configuration Enabled: yes
Sub UI: no Configured: no
[2014-11-24 05:16:11:0400 Info Configuration Framework]
Feature: BAMTools Configuration Enabled: no
Sub UI: no Configured: no
[2014-11-24 05:16:11:0400 Info Configuration Framework]
Feature: BAMTools Configuration Enabled: no
Sub UI: yes Configured: no
[2014-11-24 05:16:11:0400 Info Configuration Framework]
Feature: BAMPortal Configuration Enabled: no
Sub UI: no Configured: no
[2014-11-24 05:16:11:0400 Info Configuration Framework]
Feature: MsEDIAS2 Configuration Enabled: no
Sub UI: no Configured: no
[2014-11-24 05:16:11:0400 Info Configuration Framework]Leaving function ConfigureFeatures().
[2014-11-24 05:16:11:0416 Info Configuration Framework]Entering function WizardStep_NextStepChanged.
[2014-11-24 05:16:11:0416 Info Configuration Framework]Entering function ConfigWizardResult_Load.
[2014-11-24 05:16:11:0447 Info Configuration Framework]Leaving function ConfigWizardResult_Load.
[2014-11-24 05:16:11:0478 Info Configuration Framework]Leaving function WizardStep_NextStepChanged.
[2014-11-24 05:16:14:0416 Info Configuration Framework]Displaying information notification to user. Message: <Exception Message="Provider load failure
" Source="" HelpID="" />
Regards, Amit More

Deployment of windows firewall policy error message: Provider Load Error

How do i resolve this error?
SCCM deployment status for Windows Firewall configuration policy shows a lot of errors With errorid 0x80041013 Provider Load Error.
The eventlog has logged a WMI warning:
A provider, WindowsFirewallConfigurationProvider, has been registered in the Windows Management Instrumentation namespace Root\Microsoft\PolicyPlatform\WindowsFirewallConfiguration to use the LocalSystem account. This account is privileged and the provider
may cause a security violation if it does not correctly impersonate user requests.
Source WMI Event-ID: 63

I've seen similar errors with WMI corruption, bad component registration in WMI, or permissions issue in WMI. For some more information see also:
http://blogs.technet.com/b/configmgrteam/archive/2009/05/08/wmi-troubleshooting-tips.aspx
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

How long is Hyperv WMI provider (V1 is supported) in coming windows server versions

Hi Guyz,
We currently have Windows Server 2008r2 servers and recently moved few of them to windows server 2012. we have lot of powershell scritps that we require for adminstrative purposes and all of them are using Hyperv Wmi Provider (\Root\Virtualization)
via powershell and even after moving to windows server 2012 , we found that the support for WMI provider 1 is available in 2012. But we want to know that is this support always there in coming future versions for hyperv..??? because we have lot of complex
powershell functions written and we seriously need to give lot of time if we wanna change it.

The v1 virtualization namespace was announced as deprecated with the release of Server 2012. This release contained both v1 and v2 namespaces.
The v1 virtualization namespace was fully deprecated with the Server 2012 R2 release. This release contained only the v2 namespace.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.
Disclaimer: Attempting change is of your own free will.

SSIS Package Load Failure and is missing Execute SQL Task in Toolbox

Also, BIDS closes after right-clicking the toolbox and selecting “Choose Items”.
I’ve tried several ways to fix these issues with no success.
I’m running SSIS/SSMS/SQL Server 2008 R2 (but not running an SQL instance on my PC) on a Windows XP with Service Pack 3 workstation. I get the following errors:
WHEN OPENING BIDS:
I get 2 errors titled “Package Load Failure”. They both reference ‘Visual Studio Explorers and Designers Package’ as being what failed to load. The first message references GUID 8D8529D3-625D-4496-8354-3DAD630ECC1B. The second references GUID AA612177-A69A-4391-B2F4-17F8A88F4BBA
. They both mention contacting the package vendor, but I haven’t got any Add-ins loaded so I’m not sure what that means exactly. They also both ask if I’d like to skip loading the package in the future.
ONCE BIDS IS OPEN:
No error messages appear here. There is no ‘Execute SQL Task’ in the toolbox for Control Flows. Also, if I attempt to open a project containing this object (Execute SQL Task), I get this error in a modal window:
TITLE: Microsoft Visual Studio
There were errors while the package was being loaded.
The package might be corrupted.
See the Error List for details.
BUTTONS:
OK
. . . and these errors in the Error List at the bottom of the IDE:
Error      1
Error loading Package.dtsx: Failed to load task "Execute SQL Task", type "Microsoft.SqlServer.Dts.Tasks.ExecuteSQLTask.ExecuteSQLTask, Microsoft.SqlServer.SQLTask, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91". The contact information
for this task is "Execute SQL Task; Microsoft Corporation; Microsoft SQL Server 2008 R2; © 2007 Microsoft Corporation; All Rights Reserved;http://www.microsoft.com/sql/support/default.asp;1".
        C:\Documents and Settings\848862.VCHS_NT_DOMAIN\My Documents\Visual Studio 2008\Projects\LearnSSIS\LearnSSIS\Package.dtsx
1
1
Error      2
Validation error. Execute SQL Task : The task has failed to load. The contact information for this task is "Execute SQL Task; Microsoft Corporation; Microsoft SQL Server 2008 R2; © 2007 Microsoft Corporation; All Rights Reserved;http://www.microsoft.com/sql/support/default.asp;1".
        Package.dtsx
0
0
Error      3
Validation error. Execute SQL Task : There were errors during task validation.
   Package.dtsx
0
0
Finally, when I attempt to add the Execute SQL Task via the Tools menu, “Choose Toolbox Items” selection, I do get the tabbed box for adding things. However, they only come up after issuing this error:
The following assemblies are installed SDK assemblies but could not be shown in the customize toolbox dialog because they are missing one or more components. Please make sure that all necessary libraries are available:
Microsoft.SqlServer.SqlCEDest.dll
Microsoft.SqlServer.Management.CollectorTasks.dll
Microsoft.SqlServer.SQLTask.dll
System.Data.SqlServerCe.dll
Microsoft.Synchronization.Data.SqlServerCe.dll
(above dll repeated at bottom of message)
After this message, I have my choice of .NET Framework Compnents. When I select COM Components, those come up with no problem. The WPF Components tab generates the same dll error above. The Maintenance tab is empty. The SSIS Data Flow Items tab loads fine,
as does the SSIS Control Flow Items tab – but there’s no Execute SQL Task there either.
If you open the toolbox (on a new project, with a project loaded, or without a project loaded) and right-click, then select “Choose Items”, the entire application quickly closes. This “closing behavior” is the same thing you get if you attempt to add toolbox
items through either the Tools menu or the right-click method when you launch BIDS in SafeMode.
In an effort to fix this – I’ve rolled back the .NET Framework version to 3.0 and reinstalled back up to 4; I’ve uninstalled and reinstalled SQL Server 2008 R2 shared services as well as the entire application; I’ve cleared the .tbd files from my user profile;
and I’ve run several things from the command line (devenv.exe /resetuserdata, /setup, /resetskippkgs, etc.). Lastly – I’ve applied every Service Pack and update applicable to my PC (ok, it belongs to my employer – but no one here has been able to figure this
out either).
After having worked this for several days now and, I think, exhausting every available avenue from search engines – I turn to you. Please let me know if you can help. Also, I can provide any additional
files or information you may require.
CBS

try: Devenv.exe /ResetSettings
http://msdn.microsoft.com/en-us/library/ms241273(v=vs.80).aspx
Or try this (it's for 2005, but maybe it works for 2008 aswell):
http://geekswithblogs.net/cicorias/archive/2007/10/10/Restoring-Missing-Toolbox-Items-in-Visual-Studio-2005---just.aspx
or try
http://stackoverflow.com/questions/1268298/how-to-rebuild-the-visual-studio-toolbox
"You can also go into the folder "C:\Documents and Settings\\Local Settings\Application Data\Microsoft\VisualStudio\9.0" and delete the *.tbd files. I have had to do this a couple times to get rid of duplicate items and when Reset Toolbox crashes
without warning"
Please mark the post as answered if it answers your question | My SSIS Blog:
http://microsoft-ssis.blogspot.com |
Twitter

Qosmio F - Unable to load into Windows or anything

Yesterday, while studying other day outside another student bumped the table I was studying on. I would say "tapped" as it was not that hard. The normal message appears where it says the laptop will move the harddrive to a safe location etc.
Shortly after maybe 10-20mins, I get a message on the laptop screen asking me to "backup the laptop" as there was some major error or failure. I clicked on the "additional information" and it basically said all my drives C:, G: and whatever I had disk failure or something. Unable to backup the laptop as I did not have CD's present to back it up with I took it home to do i today.
The laptop is refusing to even load into windows at the moment. Unable to back up or anything. Keeps loading into options about system repair, restore, memory diagnostics etc. nothing fixes it.
I've only purchased the laptop since oct/nov of 2010. Didnt start using it till jan/feb of this year also. Should I attempt to open up the HDD as it might have loosen out at the back or? Should I send it back to manufacturer to look at? It's critical exam time for me and this is devastating! Also flying overseas late June after exams and wishing to take the laptop over there. Please help! Thanks advance for all advice and suggestions.

Hi Kyo,
Your posting is a little bit hard to understand and a screenshot of this error message would be useful but if you get an message about defective HDD and all partitions you should contact an authorized service provider in your country.
Your notebook should be still under warranty so the guys can replace the HDD for free. If you need some important data you can ask if they can rescue some files and do a backup. Alternative you can try it yourself if you buy an external HDD case for example. Then you can connect the HDD via USB to another computer.

Error:Cannot connect to WMI provider. You do not have permission or the server is unreachable

I'm getting the below message when i try and access SQL Config Manager on my Windows Server 2003 R2
"Cannot connect to WMI provider. You do not have permission or the server is unreachable. Note that you can only manage SQL Server 2005 and later servers with SQL Server Configuration Manager.
Generic failure [0x80041001]"
Also tries with the below solution but still the error persists
The solution is to go to a command prompt as administrator and then run mofcomp.
C:\Program Files\Microsoft SQL Server\90\Shared>mofcomp "C:\Program Files\Microsoft SQL Server\90\Shared\sqlmgmproviderxpsp2up.mof"
Below was the output of the command:
Microsoft (R) 32-bit MOF Compiler Version 5.2.3790.1830
Copyright (c) Microsoft Corp. 1997-2001. All rights reserved.
Parsing MOF file: C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmp
roviderxpsp2up.mof
(1): error SYNTAX 0X8004402f: Error creating temporary file
Compiler returned error 0x8004402f
C:\Program Files (x86)\Microsoft SQL Server\100\Shared>
Can anyone tell how this problem can be solved?

Sorry for the mistake.The command prompt is
C:\Program Files (x86)\Microsoft SQL Server\100\Shared>mofcomp "C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof"
And error i got is
Microsoft (R) 32-bit MOF Compiler Version 5.2.3790.1830
Copyright (c) Microsoft Corp. 1997-2001. All rights reserved.
Parsing MOF file: C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmp
roviderxpsp2up.mof
(1): error SYNTAX 0X8004402f: Error creating temporary file
Compiler returned error 0x8004402f
C:\Program Files (x86)\Microsoft SQL Server\100\Shared>
I hav checked that sqlmgmproviderxpsp2up.mof is in C:\Program Files (x86)\Microsoft SQL Server\100\Shared\ folder.

SQL Server Service Account - Domain Account - WMI Provider Error - 0x80092004

Hi,
if I try to use an domain account for SQL service start using SQL configuration Manager I receive the error
WMI Provider Error - 0x80092004
in Popup Window and in Eventlog 5 Error Events from Source MSSQLSERVER:
26014:
Unable to load user-specified certificate [Cert Hash(sha1) "BA78B5DBF93CCD7EFA1860C99B0D6141D480199A"]. The server will not accept a connection. You should verify that the certificate is correctly installed. See "Configuring Certificate for
Use by SSL" in Books Online.
17182:
TDSSNIClient initialization failed with error 0x80092004, status code 0x80. Reason: Unable to initialize SSL support. Cannot find object or property. "
17182:
TDSSNIClient initialization failed with error 0x80092004, status code 0x1. Reason: Initialization failed with an infrastructure error. Check for previous errors. Cannot find object or property.
17826:
Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
17120:
SQL Server could not spawn FRunCommunicationsManager thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
After I put the account in local administrator group the service starts up.
I want to use the lowest privileges. Do I really need the SQL server service account in local administrator group? How to fix the error?
thanks

Hi baschuel,
It is recommended to run SQL Server service by using the lowest possible user rights and it is supported to use a domain account instead of an account from local Administrators group to configure SQL Server service. According to your error messages, the
issue could be due to that the incorrect certificate is used, or the domain account has no access to the Crypto folder(C:\ProgramData\Microsoft\Crypto). To troubleshoot the issue, you could follow the two solutions below.
1.Import the correct certificate following the steps in the article:
http://windows.microsoft.com/en-hk/windows/import-export-certificates-private-keys#1TC=windows-7
2.Grant the domain account full access to the Crypto folder.
Regards,
Michelle Li
If you have any feedback on our support, please click
here.

Boot message: problem with hard drive detected. Slow loading of windows 7

Good Day
I am having a problem with my hard drive, everytime it boots these days it starts with a message: Warning: a problem with the hard drive has been detected, followed by an extremely slow loading of windows. then once in windows it gives me Anothet message
the messsage says hard drive failure imminent you should back up you data etc.
My specs are:
Intel core 2 duo e8400 3.0 ghz
4 gig ddr3 transcend
1 tb seagate 7200.12
giga byte nvidia 9800 gt 1 gig ddr3
Please help lots of data.

Another option:
Take your hard drive out and slave it into another KNOWN WORKING PC.
Back-up your data immediately. Slow boot usually indicates that the drive is going to die. (Check your warranty!)
Then, run "chkdsk /r" from the host PC to check the failing drive. (It is good to match OSes if you can.)
MCSE: 6771498

Installation Failure: Windows failed to install the following update with error 0x800F0922

Hi folks,
I have a HP Elitebook Folio 9470p. It came with Windows 8, and I installed it on my corporate domain. I was trying to do some Windows updates so I could upgrade it to Windows 8.1, but it fails installing the updates, whether or not I try
to install them one at a time or all of them. It has about 18 updates it needs from security updates to a .net framework update. I run Symantec EP, and disabled it, checked for driver updates for things like display and networking and they are
all up to date.
I'm at a loss as to what to do. It gives this error in the event log for each file, Event ID 20.
Installation Failure: Windows failed to install the following update with error 0x800F0922: Security Update for Windows 8 for x64-based Systems (KB2862152).
This is the example for KB2862152, but it gives the same error for every one. I've tried to auto fix for Windows update issues and it fixed a couple of the issues, but not all of them, and provides no other help.
I also deleted folders and files from the SoftwareDistribution folder as well, to no avail. Any ideas what I can do to get whatever updates it needs, so I can fully patch it, and upgrade it to Win 8.1?
Thanks for any help!

Hi MM. Mr Kywildcat and Vegan Fan,
GOOD NEW ! At this time, my issue is solved. The only black side is "how ?" : I hope that we will get a response some day ; however, and for in information pnly - hoping this could help someone - I resume some actions which allowed this the happy end
1) about installing 8.1 : I wanted to be sure that gain/pain ratio was positive, and that upgrading from a (potentially) damaged system would'nt produce something looking like a new Win 8.1, but difficult to maintain and keeping some negative potentialities.
2) I was influenced by the fact that this
0x800F0922 error acted as "a serial killerror", whose root cause could be a unique update error at reboot time concerning several (>20) packages, so I decided to test some manual upgrades.
3) Manual update (i.e. manual download and maunching of .msu packages) of the 2 following packages
(whose update previously failed on a Windows Update) was successful : .NET Framework version 3.5 for x64 (KB2898866) and Camera Codec Pack Windows 8 for x64 (KB2899190)
4) So I decided to try Windows Update on a selection of packages, first : those concerning .Net Framework 3.5 and 4.5 (that is: KB2898866, 2901120, 2898865) --> Successful !
5) finally, I selected almost all other packages, with some exceptions wich I (think to) have no need for : KB2871690, 2904659, 2843630. To be complete, here is the list of pakages updated one time at all :
KB 2892074, 2893294, 2893984, 2909210, 2912390, 2916036, 2889784,2903938, 2911101, 2913152, 2917499
--> always succesful.
I am not a specialist, but I uess that this 0x800F0922 error hides another problem which is globally "H-RESULTED"
to all updates pending in one update operation with reboot. This could be assumed from this CBS.log exterped from my last wrong attempts, where root cause seems not to be
0x800f0922, but 0x80004003 :
2014-02-15 21:29:13, Info CBS Could not get active session for current session file logging [HRESULT = 0x80004003 - E_POINTER]
2014-02-15 21:29:13, Info CBS Not able to add pending.xml.bad to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2014-02-15 21:29:18, Error CBS Startup: Failed to process advanced operation queue, startupPhase: 0. A rollback transaction will be created. [HRESULT = 0x800f0922 - CBS_E_INSTALLERS_FAILED]
Anyway, thanks to you who spent some of your time to describe issues and search/ suggest solutions ; I will upgrade my system to 8.1 anyway, some of this day, when I am sure that my configuration does not hides some other problem. I thing that potential
issue remains until maybe a new KB corrects it, wrong :-) ?
And I hope that you - Mr Kywildcat - can upgrade your system on "current levels" trying similar attempts.
Phil

Package Load Failure message in VS 2005 and Error: WIJ 20002

After installing BusinessObjects Enterprise XI 3.1 .NET SDK when ever I open any project in VS 2005 I get the error message (the same happened on other system as well)
Package Load Failure
Package 'BusinessObjects.Enterprise.Vsip.BOEVsPackage, BOEVsPackage, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=... has failed to load properly (GUID = {...}). Please contact package vendor for assistance. Application restart is recommended, due to possible environment corruption. Would you like to disable loading this package in the future? You may use 'devenv /resetskippkgs' to re-enable package loading.
I did try 'devenv /resetskippkgs' but still get this error. Any idea reagarding this.
Next issue using the code sample provided in the site to create webi document by passing the universe id gives error message :
"The Web Intelligence Java Report Panel cannot connect to the server. close the report panel and try to connect again or see your BO Administrator. (Error: WIJ 20002)."
The Java version I have is 6 and I checked the Universe is not locked.
Need help to identify the cause for both errors.

Try the following as posted on another forum:
Two solutions:
1. -Go in to the Tools menu in .NET, and choose Import and Export Settings.
- From the dialogue box, choose Reset All Settings and follow the steps
2. If you have installed VS.NET to a drive other than the C drive, copy all files from the folder C:\Program Files\Microsoft Visual Studio 8\Common7\IDE to the same folder on the drive where .NET is installed, ie :
D:\Program Files\Microsoft Visual Studio 8\Common7\IDE
Regards,
Jonathan

App-v 5.0 SP2 hotfix 5, an error occurred when querying the App-V WMI provider

Hi,
We have installed App-v 5.0 SP2 + hotfix 5 (via SCCM 2012 R2 CU1) on some Windows 7 clients. That worked fine but no app-v applications go through.
Error:
AppVPackageQueryClient5X::GetPackageDataByPackageGUID() failed for virtual application [a835fa1-f82a-4efe-957a-8c6678d4a431]. (0x87d01290)   AppVHandler   5/08/2014 10:23:56   3440 (0x0D70)
CAppV5XHandler::DiscoverIndividuleApp() failed. (0x87d01290)   AppVHandler   5/08/2014 10:23:56   3440 (0x0D70)
+++ Discovery of application [AppDT Id: ScopeId_8B8D93AF-5181-48FE-9202-2CFE5FC93EE2/DeploymentType_50eba242-3688-4b4f-9b61-84f0123f667d, Revision: 7] returned an error (0x87d01290).   AppVHandler   5/08/2014 10:23:56
3440 (0x0D70)
CAppV5XHandler::DiscoverApp() failed. (0x87d01290)   AppVHandler   5/08/2014 10:23:56   3440 (0x0D70)
Deployment type detection failed with error 0x87d01290.   AppDiscovery   5/08/2014 10:23:56   3440 (0x0D70)
Failed to perform detection of app deployment type Microsoft - Console, revision 6) for user. Error 0x87d01290   AppDiscovery   5/08/2014 10:23:56   3440 (0x0D70)
Error = 0x87d01290 = An error occurred when querying the App-V WMI provider.
Please advise on this specific error. Should we look for corruption in app-v client, problem in sccm client ...?
J.
Jan Hoedt
Update: clients which don't have problems are client which had hotfix 4 THEN hotfix 5 installed. Should we install it that order? Client WITH problems have App-v 5.0 SP2 then hotfix 5 directly.
Update2: I installed the app-v client via setup.exe, the hotfix 4 also via setup.exe but since it installed all language packs, I decided to extract hotfix 5 and use the msp.
Could that be cause of the issue? I could use the exe of hotfix 5 but then I need to be sure how NOT to install all the language packs.

I think we found a solution ourselves.
My update2 (question) explains it:
Update2: I installed the app-v client via setup.exe, the hotfix 4 also via setup.exe but since it installed all language packs, I decided to extract hotfix 5 and use the msp.
Could that be cause of the issue? I could use the exe of hotfix 5 but then I need to be sure how NOT to install all the language packs.
We installed App-v 5.0 SP2 via exe then installed hotfix via msp (extracted msp), this doesn't seem to work (though installation was succesfull). When we deploy the hotfix via the exe it works correctly.
Not sure why though.
Jan Hoedt

SQL Server Configuration Manager – Cannot connect to WMI provider – Invalid class [0x80041010]

look at this post am getting the same
http://social.msdn.microsoft.com/Forums/en-US/sqlkjmanageability/thread/4c8ca86c-105f-4f0a-ac18-6e33dda2bc46
but when I tried the solution given there , It is not working
the error I am getting is mofcomp is not recognized as internal or external command
I tried in C:\program files\Microsoft sql server\90\shared and in Windows\system32
I am getting the same error

Hi sql393,
Cannot connect to WMI provider. You do not have permission or the server is unreachable. Note that you can only manage SQL Server 2005 servers with SQL Server Configuration Manager. Invalid class [0x80041010].
The solution is to go to a command prompt and then run mofcomp.
C:\Program Files\Microsoft SQL Server\90\Shared>mofcomp "C:\Program Files\Microsoft SQL Server\90\Shared\sqlmgmproviderxpsp2up.mof"
For more information, please refer to
http://blogs.msdn.com/b/echarran/archive/2006/01/03/509061.aspx
http://msmvps.com/blogs/martinpoon/archive/2009/11/27/sql-server-configuration-manager-cannot-connect-to-wmi-provider-invalid-class-0x80041010.aspx.
Thanks,
Maggie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. This can be beneficial to other community members reading the thread.

Failover cluster wmi provider detected an invalid character

We are getting this recurring error in our two node hyper-v cluster:
ID: 6237 Source: FailoverClustering-WMIProvider
Logs anywhere from 1- 15 of these errors every half hour. We are running on Server 2008 R2 SP1 with Hyper-V role and management done by VMM 2012. Hosts are identical hardware (Intel Board, dual quad-core Xeon, 48gb ram) and VMs running on EMC VNXe 3100 shared
storage via iSCSI.
Log Name:      Microsoft-Windows-FailoverClustering-WMIProvider/Admin
Source:        Microsoft-Windows-FailoverClustering-WMIProvider
Date:          5/6/2013 5:02:11 AM
Event ID:      6237
Task Category: Failover Cluster WMI Provider
Level:         Error
Keywords:
User:          COASCADA\msscvmm
Computer:      wwpsvrhypv02.coascada.local
Description:
Failover Cluster WMI Provider detected an invalid character. The private property name 'PreviousOfflineAction' had an invalid character but the provider failed to change it to a valid property name. Property names must start with A-Z or a-z, and valid characters
for WMI property names are A-Z, a-z, 0-9, and '_'.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
   <Provider Name="Microsoft-Windows-FailoverClustering-WMIProvider" Guid="{0461BE3C-BC15-4BAD-9A9E-51F3FADFEC75}" />
    <EventID>6237</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>1</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2013-05-06T12:02:11.390560300Z" />
    <EventRecordID>8301</EventRecordID>
    <Correlation />
    <Execution ProcessID="6900" ThreadID="5376" />
    <Channel>Microsoft-Windows-FailoverClustering-WMIProvider/Admin</Channel>
    <Computer>wwpsvrhypv02.coascada.local</Computer>
    <Security UserID="S-1-5-21-3378633525-1537071075-772992230-3177" />
</System>
<EventData>
    <Data Name="Parameter1">PreviousOfflineAction</Data>
</EventData>
</Event>

Hi,
You may try the hotfix in KB 974930:
An application or service that queries information about a failover cluster by using the WMI provider may experience low performance or a time-out exception
http://support.microsoft.com/kb/974930
Cause:
This problem occurs because the WMI provider responds to the query requests very slowly. The time that the WMI provider takes to complete the query requests affects the following performance measurements:
The ability and reliability of the service or application
The speed of generating a status report about the failover cluster
Therefore, a slow response of the WMI provider may cause the application or service to function abnormally.
For more information please refer to following MS articles:
Event ID 6237: Failover Cluster WMI Provider detected an invalid character
http://social.technet.microsoft.com/Forums/en-US/windowsserver2008r2highavailability/thread/bae84aea-5a80-4637-989b-c31bbc1aa55a/
Lawrence
TechNet Community Support

Package Load Failure VS 2008 Architect & 11.1.0.6.20

I have a virtual machine running Windows Server 2003, IIS, and Visual Studio 2008 Team Architect.
When I try to install "ODAC 11.1.0.6.20 with Oracle Developer Tools for Visual Studio" I get an error "Could not start the OracleMTSRecoveryService service on Local Computer. Error 1053: The service did not respond to the start or control request in a timely fassion." I hit "Ignore" and the installation completes.
Then when I run Visual Studio and select "Run SQL*Plus Script" I get:
Package Load Failure
Package 'Oracle Develper Tools for Visual Studio .Net' has failed to load properly...
I have uninstalled and reinstalled without the MTS Recovery Service and get the same error.
Any suggestions on getting this to work?

I started visual studio with logging turned on. Here are the results from the log file:
<entry>
<record>60</record>
<time>2008/01/18 19:14:09.974</time>
<type>Information</type>
<source>Microsoft Visual Studio</source>
<description>Entering function CVsPackageInfo::HrInstantiatePackage</description>
<guid>{D601BB95-E404-4A8E-9F24-5C1A462426CE}</guid>
</entry>
<entry>
<record>61</record>
<time>2008/01/18 19:14:11.026</time>
<type>Warning</type>
<source>Microsoft Visual Studio Appid Stub</source>
<description>CheckPackageSignature failed; invalid Package Load Key</description>
<guid>{D601BB95-E404-4A8E-9F24-5C1A462426CE}</guid>
</entry>
<entry>
<record>62</record>
<time>2008/01/18 19:14:11.056</time>
<type>Information</type>
<source>Microsoft Visual Studio</source>
<description>Begin package load [Oracle Developer Tools for Visual Studio .NET]</description>
<guid>{D601BB95-E404-4A8E-9F24-5C1A462426CE}</guid>
</entry>
<entry>
<record>63</record>
<time>2008/01/18 19:14:16.273</time>
<type>Error</type>
<source>Microsoft Visual Studio</source>
<description>SetSite failed for package [Oracle Developer Tools for Visual Studio .NET]</description>
<guid>{D601BB95-E404-4A8E-9F24-5C1A462426CE}</guid>
<hr>80004005 - E_FAIL</hr>
</entry>
<entry>
<record>64</record>
<time>2008/01/18 19:14:16.313</time>
<type>Error</type>
<source>Microsoft Visual Studio</source>
<description>End package load [Oracle Developer Tools for Visual Studio .NET]</description>
<guid>{D601BB95-E404-4A8E-9F24-5C1A462426CE}</guid>
<hr>80004005 - E_FAIL</hr>
</entry>

Wmi provider load failure windows 7

Similar Messages

Maybe you are looking for