WMM for AirPort Extreme (802.11n) - UMA T-Mobile not working...

Is there any chance we'll see WMM (WiFi Multi-Media) in a firmware upgrade anytime soon? I noticed that according to the WiFi Alliance's website, when the AirPort Extreme was certified, it supported WMM!
http://certifications.wi-fi.org/wbcscertified_products.php?search=1&advanced=1&lang=en&filter_company_id=&filter_cat egory_id=&filter_subcategory=&filter_cid=&date_from=&date_to=&x=30&y=18&selectedcertifications%5B%5D=33
As an early adopter, I just got a BlackBerry 8320 from T-Mobile, which does UMA, so you can use the phone over WiFi. Works awesome with wireless routers that do WMM, basically doesn't work with my AirPort Extreme... As you might imagine, this is quite frustrating, as I have particular desire to have two APs, for basically no reason!
--Donald

I shot this across... let's see if anything comes of it:
~*~
To: [email protected], [email protected], [email protected]
Subject: a rather pressing Airport Extreme (802.11n) issue
i'm not sure if the person receiving this email will have any power (or will
care enough) to do anything about sorting this problem out, but hey...
better to try and fail than not trying at all, right?
anyway... here goes:
i am a die-hard apple user- heck, even a long-time stockholder- and recently
bought an airport extreme (802.11n) router for my house. it worked
flawlessly and i thought it was the best thing since sliced bread... well,
until i picked up a UMA phone from T-Mobile.
UMA is a service that routes your calls over WiFi. for some reason the UMA
service worked everywhere except over my Airport Extreme base station. as a
surprise, it even worked over my neighbour's older Airport Extreme (802.11g)
connection.
i swapped base stations (ie, brought his base station to my house, connected
it to my network) and it worked. so, it is an issue that is clearly
isolated to the new 802.11n base stations.
thinking it was only me with this issue, i dug around the internet and found
this discussion:
http://discussions.apple.com/thread.jspa?threadID=1152014&tstart=15
(if you want more, just google the keywords 'airport extreme UMA')
obviously there's no resolution and people are getting quite peeved that a
state-of-the-art base station can't do something than an older base station
can clearly do. so, can someone please look into this?
thanks!
pramit
~*~

Similar Messages

  • Why can't I install software for AirPort Extreme 802.11n while running Mountain Lion OSX?

    Why can't I install software for AirPort Extreme 802.11n while running Mountain Lion OSX?  The installation CD simply says that the software can't be installed while running this OSX.

    Mountain Lion already has the most recent, updated version of AirPort Utility installed on your Mac. The version on your CD is out of date, so you can trash the CD.
    Look in Macintosh HD > Applications > Utilities > AirPort Utility.

  • How do I get a download since I don't have my start up disc for AirPort Extreme 802.11n

    How do I download to start using AirPort Extreme 802.11n.  I can't find my start up disc. and don't see any downloads on Apples website.  Then how do I hook it up to work with my Westell modem?

    Please download and install AirPort Utility 5.6.1 for Windows.  The Windows Firewall and or Microsoft Security Essentials will tend to block the connection from your PC to the AirPort Extreme, so you may need to adjust the firewall settings on the PC or check the Essentials application if connection difficulties occur.
    AirPort Utility 5.6.1 for Windows - Apple Support
    Use the Setup Guide to install and configure the AirPort Extreme
    AirPort Extreme Setup Guide - Support - Apple

  • Airport Express 802.11n + Airport Extreme 802.11n 2.4ghz but not 5ghz?

    I can't get my Airport Express 802.11 to extend the network of my Airport Extreme 802.11n using 5Ghz only... but it will work with "n only 2.4Ghz"....
    any solutions?
    Message was edited by: Eric Carpenter

    Addtional info both AE's now have ver 7.5.2 installed, prior it was 7.6 and situation is still the same.

  • AirPort Extreme 802.11n Wi-Fi doesn't connect to printer

    So, I got the AirPort Extreme 802.11N Wi-Fi connected and working to my cable modem (good times), but now neither computer (PC or Mac) can connect through it to the printer (HP C4280 Aii-in-One) that we connected to the USB port on the back of it.
    Any idea what we're doing wrong here? Is there something that needs to be configured within the software of the router?

    Work your way through the Apple Troubleshooting Guide to see if that will help get the printer going.
    Bear in mind that only the print function will be supported when your device is connected to the USB port on the AirPort Extreme. Scan, copy, fax, maintenance etc. are not supported, so if you need these functions, you will need to connect your all-in-one directly to the computer.
    The PC will need to have Bonjour for Windows installed. It's on the CD that came with the AirPort Extreme.

  • AirPort Extreme 802.11n 4% Packet Loss

    I have three laptops (Macbook, HP, and ThinkPad), an iPhone 4, iPad, and a Wii on my wireless network. I replaced an old Linksys 802.11g access point and router with a new Airport Extreme 802.11n.
    Everything has been working fairly good except my ThinkPad. The TP has a ThinkPad 11b/g Wireless LAN Mini PCI Express Adapter III card and can connect to everything from coffee shop wireless to my Cisco WLAN using PEAP/WPA2 at work without skipping a beat.
    But here at home, with my new Airport - I'm losing about 4% of the pings I run and it'll drop my connection without warning. Almost like the WPA key is rotating, then just dies.
    The MacBook has an 802.11n card and can run extended ping tests without dropping a single one.
    The HP has an Intel centrino abg card and runs 0% loss as well.
    If I connect my old Linksys back up - I get 0% packet loss on WPA2 again, but to the AirPort - 4%.
    It's making my wireless network exceptionally frustrating.

    This is what I get when I'm connected to the main wireless network using 802.11g WPA2 (AES or TKIP).
    If you'd like to do this test, simply type this command from a command line (or terminal on an OS X computer)
    ping -t 10.0.1.1
    And when you're done, type CTRL+C to get the statistics. You can let it run for hours and come back.
    ping -t 10.0.1.1
    Request timed out.
    Request timed out.
    Reply from 10.0.1.1: bytes=32 time<1ms TTL=255
    Reply from 10.0.1.1: bytes=32 time<1ms TTL=255
    Reply from 10.0.1.1: bytes=32 time<1ms TTL=255
    Reply from 10.0.1.1: bytes=32 time<1ms TTL=255
    Reply from 10.0.1.1: bytes=32 time<1ms TTL=255
    Reply from 10.0.1.1: bytes=32 time<1ms TTL=255
    Reply from 10.0.1.1: bytes=32 time<1ms TTL=255
    Reply from 10.0.1.1: bytes=32 time<1ms TTL=255
    Reply from 10.0.1.1: bytes=32 time<1ms TTL=255
    Reply from 10.0.1.1: bytes=32 time<1ms TTL=255
    Ping statistics for 10.0.1.1:
    Packets: Sent = 100, Received = 96, Lost = 4 (4% loss),
    Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 2ms, Average = 0ms</div>
    Now, if I connect to the guest network or my Linksys WRT-G54, I get this:
    Reply from 10.0.1.1: bytes=32 time<1ms TTL=255
    Reply from 10.0.1.1: bytes=32 time<1ms TTL=255
    Reply from 10.0.1.1: bytes=32 time<1ms TTL=255
    Reply from 10.0.1.1: bytes=32 time<1ms TTL=255
    Reply from 10.0.1.1: bytes=32 time<1ms TTL=255
    Reply from 10.0.1.1: bytes=32 time<1ms TTL=255
    Reply from 10.0.1.1: bytes=32 time<1ms TTL=255
    Reply from 10.0.1.1: bytes=32 time<1ms TTL=255
    Reply from 10.0.1.1: bytes=32 time<1ms TTL=255
    Reply from 10.0.1.1: bytes=32 time<1ms TTL=255
    Ping statistics for 10.0.1.1:
    Packets: Sent = 100, Received = 100, Lost = 0 (0% loss),
    Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 2ms, Average = 0ms</div>
    Not a single drop... and I'm still pinging the AirPort's IP address, so I know it's not the device itself dropping pings. It must be something funky with my T400's wireless card and the private network, nothing else makes sense.

  • Help.  I lost my installation CD for my for my new AirPort Extreme 802.11n

    Need help. I lost my installation CD for my for my new AirPort Extreme (802.11n). How can I download the new Admin Utility?

    Hi Gr8Tucano,
    Currently the Airport Utility does not appear to be on the downloads page, you can call Apple support line to receive a replacement disk, but be aware there may be a charge for replacement CDs.
    Regards,
    John

  • AirPort Extreme 802.11n* Enabler for Mac 4 use with Touch?

    Hello,
    I have a 2nd Gen Touch with the latest updated software. I use Airport to connect to the internet on my new iMac 24". Will the AirPort Extreme 802.11n* Enabler software now offered in the Apple store($1.99) for Mac improve communications between the Touch and my iMac?
    Thanks

    Nope. Your touch is still limited to b/g mode wireless. In fact, if you have an all n network, your touch won't even know that it exists.
    Most of your Mac to iPod communication is via the USB cable unless you are using Remote or other applications that can move files on and off.
    BTW, that software is to enable early intel Macs to use N wireless. If your Mac is relatively new, you won't need it.
    Message was edited by: luvlabs

  • AirPort Extreme (802.11n) For non Core Duo Computer

    I have two older macs:
    IMac G5 20 1.8GHz[1.5GB -160 GB]
    IBook G4 12 1.07GHz [1GB - 30GB]
    and currently using an AEBS
    ANY CHANCE FOR ME TO USE THIS NEW
    AirPort Extreme (802.11n) ???
    THANKS
    RG
    IMac G5 20 1.8GHz[1.5GB -160 GB] AX - AEBS ::IBook G4 12 1.07GHz [1GB - 30GB] AX :: Ipod 60 GB   Mac OS X (10.4.1)  

    802.11n refers to a speedy wireless connection. When
    you connect with a wire, you're not using 802.11 at
    all. You're using Ethernet, and your Core Duo mac
    will connect to the Airport Extreme at 100Mbs (a
    little faster than the top speed of 802.11n). Then
    The top speed of 802.11n is considerably faster than 100Mbps. In narrow band mode, the Airport Extreme cards are connecting to AE Base Stations (AEBS) at 130Mbs. In wide band mode, 270Mbs. In theory, that makes connecting to the new AEBS device wirelessly faster than via the wired ethernet. It's a design decision that just doesn't make sense in my opinion.

  • How do I connect my Airport Extreme 802.11n to Epson 645 Printer?

    I can't figure out how to connect my Airport Extreme 802.11n to my Epson 645 Printer.  Can anyone help me?  Thanks!

    You may want to try reinstalling Mavericks. Airport Utility installed by Mavericks may no longer connect to your older AEBS (though I've not heard that.) Installing the Old AirPort Utility (Version 5.6) on Mountain Lion | frank.is.
    Reinstall Lion, Mountain Lion, or Mavericks
         Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
         COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
         after the chime press and hold down the OPTION key until the boot manager screen appears.
         Select the Recovery HD and click on the downward pointing arrow button.
         Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu.
         Repair the Hard Drive and Permissions as follows.
    After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
         Reinstall Lion/Mountain Lion, Mavericks: Select ReinstallLion/Mountain Lion, Mavericks from
         the Utilities menu, and click on the Continue button.
         Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is
                    three times faster than wireless.

  • I have a pc running windows 7.  I got an Airport Extreme 802.11n Wi-Fi and the printer is now plugged into the Airport.  The wireless router works fine but the printer shows as offline in control panel and in word. The printer is a HP LaserJet CP1525nw.

    I have a pc running windows 7.  I got an Airport Extreme 802.11n Wi-Fi and the printer is now plugged into the Airport.  The Airport works fine but the printer shows as offline in control panel and in word. The printer is a HP LaserJet CP1525nw.

    +For now I have it set to Share Public IP address - Is this correct for my Network Setup with The Airport Extreme being the only router being used ?+
    This would be the correct setting if the AirPort Extreme is connected to a simple modem (one ethernet port).
    *Settings I have Enabled*
    5 GHz name indicates that you have elected to use the option to assign a separate name to the 5 GHz network. This will allow you to "tell" compatible computers to connect to that network, rather than the slower 2.4 GHz network
    Use Wide Channels is recommended for 5 GHz operation.
    Interference Robustness often does more harm than good and should not be used unless you know you are in a area with a lot of wireless networks and you feel that your network is experiencing interference issues from a nearby network.

  • Not able to see disk connected to AirPort Extreme 802.11n

    I just installed my AirPort Extreme 802.11n Wireless Base station. Wireless internet works like a charm, however, I cannot see my external hard disk when it is connected to the base station (amber light blinking and when checking the problem, I am told that "Disk needs repair"). When connecting the hard disk directly to the PC, I have no problem seeing the data. Any tips or tricks out there... ?
    AirPort Extreme 802.11n   Windows XP  

    I finally got my 500 GB Western Digital MyBook USB drive to work by reformatting it to HFS+ format.
    Of course, before I could do that, I had to copy all my files onto another hard drive. That job took a day to accomplish.
    I work with Poser, and have a lot of content installed... We're talking thousands of files.
    Once the drive was reformatted to HFS+ format, I copied everything back over. That took another day. Then I connected to the AEBS.
    The USB drive was immediately recognized. It was incredibly easy to access the USB drive on my PCs. It required no effort on my part, except to supply the password.
    In the end, I've decided this effort is a failure.
    The drive is way too slow for my needs. Also, one of my vital Poser utilities (CorrectReference Pro) will not work properly with the USB drive on the AEBS.
    I am currently in the process of copying all those files over to two external USB hard drives attached to my other PC.
    Then I plan to unmount my 500 GB MyBook drive, and reformat it back to NTFS. I'll let the Notebook PC have it on a direct connection again.
    I have a couple "junk" External Hard drives that are 160 GB. Maybe I'll use one of those as an Airport disk...
    But I won't be using the Airport disk for anything important. It's too slow.

  • Connecting AirPort Express to AirPort Extreme 802.11n

    The following steps helped me set up an AirPort Express base station connected to a set of wireless speakers with my new AirPort Extreme 802.11n base station. I’m posting this because the process was not entirely intuitive, at least not to me.
    I’ll assume you have set up the AP Extreme base station to connect to the internet and run your home network and that you are connected to your wireless network.
    Make sure you set-up the AP Extreme base station to broadcast in 802.11n + 802.11b/g modes, i.e. both at once. You will also have to check he setting that allows the newtork to be extended.
    Reset the AP Express base station so that in runs on the factory defaults by pressing the reset button with a paper clip. Wait for it to completely restart.
    Launch the AirPort Utility. You should see both your AP Extreme and AP Express base stations in the left hand column. Click on the AP Express base station you just reset. When it asks to switch wireless networks do so. Then hit continue.
    On the next screen select “Connect to my current wireless network” option and hit continue.
    On the following screen select the “Extend the range of my AirPort Extreme or AirPort Express network” and hit continue. Do NOT select the “Join my wireless network” option even though it says this is how you connect to wireless speakers. This is the part that was not obvious to me. When I tried this the AirPort Express base station flashed orange and wouldn’t connect despite waiting 30 minutes.
    Chose the network you wish to extend from the drop down menu. My keychain supplied the password for the network.
    Give your base station a name and hit continue.
    Select the main base station in the list provided. This is the one connected to the internet and hit ok.
    The Airport Utility software will configure the network to accept the AirPort Express base station.
    Now all that’s left is to connect your wireless speakers to the AirPort Exppress base station. You can now play music through AirTunes while being connected to your fast 802.11n network.

    I recently setup an Airport Express in conjuction with my Extreme Base Station. I'm not really understanding how this method enables 802.11n connection speeds (via Base Station) to the internet and also allow streaming music through the Express at 802.11b/g. It's my understanding that if you want to be able to access the internet AND stream music at the same time the Express needs to join the network. In order for the Express to join the network (able to recognize the Base Station)...the Base station needs to be changed from 802.11n only to 802.11n (802.11b/g compatable)....which essentially means your connecting to the internet at 802.11b/g. If your wanting to keep 802.11n only on the base station...you would have to create a seperate network via the Express to stream music. What this means is you CANNOT access the internet and stream music at the same time. You would have to manually change Airport in the taskbar to do one or the other.
    Am I off base here? If I am missing something please let me know...because it would be great to be able to connect to the internet at 802.11n only with a multi-case rate set to 23Mbps vs. the 11Mbps (maximum) of the 802.11b/g compatable option.
    I guess what is confusing me is that my setup is basically the same as what was described above..minus having the "Extended Network" being enabled. How does extending the network change things?

  • Help needed connecting Iomega Minimax Ext HDD to Airport Extreme 802.11n

    Would appreciate if someone can help me with the following task. After researching and trying several things, I have not succeed in resolving the issue.
    I want to connect a Iomega MiniMax Ext HDD (for Mac) to my (Airport Extreme 802.11n + Time Capsule) box using the USB port at the back of my Airport Extreme. Then I want to access the Ext HDD wirelessly as a drive on my Macbook (snow leopard OS). I was told this was possible at the Apple Store...but have failed so far.
    Any suggestions so far

    Hello smitra. Welcome to the Apple Discussions!
    The following are the basic steps for sharing an external USB drive attached to either an 802.11n AirPort Extreme Base Station (AEBSn) or a Time Capsule (TC):
    o Plug the hard disk into the USB port on the back of the base station.
    o Open AirPort Utility, located in the Utilities folder in the Applications folder on a Mac, and in Start > All Programs > AirPort on a computer using Windows
    o Select your base station, and then, choose Manual Setup from the Base Station menu.
    o Click Disks in the toolbar, and then, click File Sharing.
    o Choose “With a disk password,” or “With base station password” if you want to secure the shared disk with a password, or choose “With accounts” if you want to secure the disk using accounts. If you choose to use accounts, click Configure Accounts, click the Add "+" button, and then enter a name and password for each user that will access the disk. For simplicity, I would recommend using the "With a disk password" option.
    o Choose “Not allowed,” “Read only,” or “Read and write” to assign guest access to the disk.
    o Select the “Share disks over Ethernet WAN port” checkbox if you want to provide remote access to the disk over the WAN port.
    You should now be able to find this drive within Finder under the SHARED category.

  • To extend AirPort Extreme 802.11n

    Wanting to extend the range of my AirPort Extreme 802.11n (version 7.4.2)
    I have a Airport Express as trial also a 802.11n. AirPort Utility has a lot of trouble finding the Express. When AirPort Utility does find it and I want to set up the Express I have to switch from the Extreme to the Express. Unfortunate side-effect is that AirPort Utility then looses track of the Extreme and I can't "join" the Express as Utility can't find anything to join.
    As I have the Express on trial of a friend I did the normal reset (button for 10 sec) and even the factory reset (unplug, press reset button while plugging in) however I did notice it still had his settings. Changed those but as I said before it seems for AirPort Utility is is either or instead of both.

    Based on your description, it sounds like the AXn is configured to join the wireless network created by the AEBSn ... not extend it.
    The following would be the basic setup steps for extending a wireless network:
    o If practical, place the base stations in near proximity to each other during the setup phase. Once done, move them to their desired locations.
    o Open AirPort Utility and select the base station that will connect to the Internet.
    o Choose Manual Setup from the Base Station menu, or double-click the base station to open the configuration in a separate window. Enter the base station password if necessary.
    o Click AirPort in the toolbar, and then click Wireless.
    o Choose “Create a wireless network” from the Wireless Mode pop-up menu, and then select the “Allow this network to be extended” checkbox.
    o Next, select the base station that will extend this network, and choose Manual Setup from the Base Station menu, or double-click the base station to open its configuration in a separate window. Enter the base station password if necessary.
    o Choose “Extend a wireless network” from the Wireless Mode pop-up menu, and then choose the network you want to extend from the Network Name pop-up menu.
    o Enter the base station network and base station password is necessary.
    o Click Update to update the base station with new network settings.
    (ref: Page 46 of "Designing AirPort Networks Using AirPort Utility.)

Maybe you are looking for