WMP And XM Radio online

Hi all,
Was wondering if anyone here has got xm satelite radio to stream. I was able to listen to xm online with the WMP plug-in in safari and netscape, suddenly it stopped working. Tried downloading firefox still doesn't work. Uninstalled WMP installed flip4mac still nothing. Keep getting error message "File cannot be opened. Verify path and file name are correct and try again." Have even tried the widget. XM hasn't been any help. Anyone have any ideas.
Thanks

Sorry for the delay Eric, but I'm still trying to figure out these forums, which have now grown with the Intel thing.
So let's see...... It's the XM radio problem again Eh?? You're getting the same error message I used to get. In fact, I got that error message again today (when trying to play the Widget) and thought of you. I just loaded the Widget again, and relogged into XM, and it worked. Broke a sweat though worring about it again for that 15 seconds.
I did so many things I'm not sure what exactly solved my problems. That "Audacity" program was the main problem I know for a fact. Audacity even knocked out my keyboard volume control once.
1. Do you have the Widget loaded, and it used to work?
2. Can you just go to the XM site and will that play?
3. Did you remember to go into Apps.- utilities- MIDI, and make sure that the audio output is no higher than 44100Hz's??
4. What about calling XM and having them reset your password??
My XM now works by typing in the XM address via both Safari, and from that XM Widget thing (which I can't remember where I got it from).
I'm now using the Xitel Pro HIFI link and routing all (not just iTunes) computer sound (when I want to switch off internal speakers) to my home audio system via the usb port. It's great! Remember, we talked of Xitel before.
So Eric, I guess I'm not sure what else to tell you. I feel that if you don't know what to do..... We are all screwed, ..... As you are the one who always seem to know how to fix the problems.
Good Luck, and let me know how you are doing with this issue.
Applejam

Similar Messages

XM Radio Online Doesn't Connect

Does anyone know how to get XM Radio to work within Safari? The Windows Media Player plug-in tries to connect but never does. I tried the Flip4Mac plug-in and got the same non-result. Essentially the XM Widget behaves the same except that it occasionally connects after a really long wait and other times generates error messages.
The AOL radio player actually does work but does not offer all of the XM channels.
An iTunes solution would be the ultimate right way to go but I haven't seen any way to do that either.
Quick Silver Mac OS X (10.4.1)

I do not believe XM is fully compatible with Safari.
The XM Radio Online portion of the site is compatible. The rest of the site is horrible for Macs though.
Are you getting a -2048 error message with Flip4Mac (I believe that's the error number)? Also, make sure you're using the latest version of the OS as well as the latest version of Flip4Mac. Both work fine for me.
Also, you might want to try my application, ThisWeekOnXM which eliminates the need to open Safari for listening to XM Radio Online.
As per Apple's TOS, I won't receive any benefit from you downloading my application unless you choose to donate, which is entirely in your hands.
-Ryan

Listening to radio online!

I have been trying in vain to listen to radio online.... I like to listen to BBC Radio 2 and some of the commercial american stations (Power 96).... A strange combination I know.
Anyhow. It is proving nigh impossible to get my music fix. Either the live player is based on microsoft media player. Or the patch that is required only runs with windows....
I got a mac to escape the pains of windows.. How can I listen to radio without going back to the devil (windows)?
James

Maybe the Flip4Mac plugin for Quicktime will allow you to listen to those streams?

XM Radio Online

I have a new Mac and have tried to use my XM Radio online. The problem seems to be the Flip4Mac plug in which I uninstalled and reinstalled. I worked with Mozilla tech who tried the plug in on his Mac and his did not work either. Anyone else having this issue, and is there a work around?

Hey iBradly,
Just to save you some time, I tried opening the page with the latest Firefox Beta (which gave me the raw XML code of the site), Camino 0.8 (which also gave me the raw XML code), Opera (which allowed me to fill in the form but not select a state from the drop down), and Safari (which doesn't allow anything due to their site currently being IE only).
I even tried the debug menu in Safari for Windows IE and Mac IE. Neither worked. However, the actual Internet Explorer applications for OS X did work and you're able to fill the form out properly.
If for some reason it doesn't work for you or you don't want to use IE for the Mac (can't blame ya!), then you can call XM @ 1-800-XM-RADIO and activate by phone. Be sure to tell them the site is doesn't work on a Mac and you want the online activation rate of $10 instead of the over the phone rate of $15 (assuming you have to activate the radio - I'm not entirely sure how the free trial periods work).
Good luck!
-Ryan

I cannot receive audio from several of my internet music sites such as XM Radio online since switching to Firefox 4 Beta 1 - Help

I cannot receive audio from several of my internet music sites such as XM Radio online since switching to Firefox 4 Beta 1 - Help
== URL of affected sites ==
http://www.xmradio.com/player/listen/playerShell.action

I should have explained further. The game opens in a new window over to the upper left of my screen, leaving the original page underneath. I tried minimizing it so that I could get to my toolbar and did the View > Zoom > Reset. This has no effect. The lower portion of the game is still not showing. Using other browsers the window or frame of the game is much larger, therefore everything shows.

Protected mode message comes up and when I try to open files it says it encountered an error and to check online.. i can not open any files now

Within the past week I have been getting messages when trying to open pdf files " that its in protected mode and can not open"
I deleted adobe and reinstalled directly from Adobe.com and now I can not open any file with a message it has encountered an error
and will check online for solution. Please assist as no files will open now
This is details of error
Problem Event Name:    APPCRASH
Application Name:    AcroRd32.exe
Application Version:    11.0.10.32
Application Timestamp:    547e9779
Fault Module Name:    StackHash_147f
Fault Module Version:    0.0.0.0
Fault Module Timestamp:    00000000
Exception Code:    c000041d
Exception Offset:    77a011f1
OS Version:    6.1.7601.2.1.0.256.48
Locale ID:    1033
Additional Information 1:    147f
Additional Information 2:    147ff66574b08dc93180d912e60eb897
Additional Information 3:    c48b
Additional Information 4:    c48be403c52ec6c06778481aaa8948d8
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Can you open Adobe Reader by itself? If so, try to disable Protected Mode [Edit | Preferenes | Security (Enhanced)].

JB will be sooner than later and new radios

JB will be sooner than later and new radios Develpoers are getting JB versionJRO03O and radios i515.10 vFF02/ I515. FG02
they say it seems to clear up a lot of issues possible all the connection issues we can only hope.
You can search google for articles about thier progress......

Android police is where I have found most with links to the needed
software.
On Sep 6, 2012 9:00 PM, "mariomerendino" <[email protected]>

ITunes match and iTunes radio skips songs on wifi

iTunes match and iTunes radio have been skipping songs while on wifi. We have a Linksys EA6350 setup in WPA2 personal for both the 2.5 ghz and 5 ghz networks. Both are setup as mixed 802.11n/ac with both on a channel width of AUTO. We are using two Apple TV's, iPhone 5s and a iPad 2. One of the apple TV's is setup as a different iTunes account than the others. It skips songs on all devices and accounts, however when I turn the wifi off on my iPhone both iTunes match and iTunes radio work flawlessly. What should I do?

+1 same issue here.
Not sure exactly when it started, but seems like it was sometime on or after 3/7.
It appears to affect every device I have on the home network (iMac, MacBook Pro, Macbook Air, iPhone, iPad). Most devices are wifi, but I can confirm the issue also occurs on my iMac which is connected via ethernet. I'm able to get both iTunes match streaming and iTunes Radio streaming to the iPhone and iPad if I disable wifi and use LTE.
On my iOS devices, it just looks like it's skipping songs repeatedly...every now and then it might play one song, but it skips 30-50 before that happens. A few times it just kept skipping until the device rebooted itself. On my OS X devices, I don't get any of the skipping, it just looks like it's trying to load the radio station (i get the blue progress bar at 100% but nothing ever happens).
For what it's worth, I'm using an Apple Time Capsule for as my DHCP for ethernet and wifi. My internet provider is Cox Communications.

IPod Nano with 1.1.1 software update and iPod Radio Remote

I currently have iPod Nano with 1.1.1 software update and iPod Radio Remote, but even after the update I do't get the radio option to appear in the main menu or music menu, with the option in settings turn ON. Why isn't this thing working?

hiya!
just doublechecking something. are you connecting the remote directly to the nano, or are you connecting it to a Dock and putting the ipod in the dock?
love, b

Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email. the button did not work and i looked online and saw where you could change it to a regular button and enter the email for it to go. it worked, but only for thos

Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email. the button did not work and i looked online and saw where you could change it to a regular button and enter the email for it to go. it worked, but only for those with adobe pro. i could not get it to work with reader. is there a way i can make it work for reader?

Noted.
The LiveCycle user to user forum is across town at:
Adobe LiveCycle
Be well...

Release management with Azure and Visual Studio Online (Cloud TFS)

What strategy would you use to manage the releasing of versioned software to Azure cloud services (web and worker roles)? We are not looking for continuous integration. We are using Visual Studio 2013 and Visual Studio Online (Cloud TFS).
At one point, we were releasing straight from Visual Studio using the Azure Cloud Project Publish tool. This is really bad practice in my opinion as you can never be sure what you are really releasing. Additionally, there is no automated control on the labeling
or branching of code, or the running of unit tests and code analysis checks.
Next, we employed Release builds on Visual Studio Online. Before deployment, one would edit the appropriate Build Definition (whether it be for Test or Production by and filling in the code label (under the "Get Version" build property) that is to
be released. This would then get the appropriate code (by the label specified), build it, and release it to whatever cloud service is specified in the targeted Cloud Project profile (this is using the AzureContinuousDeployment.11.xaml template).
There is still a degree of manual intervention involved. Also, the fact that a version of code is built every time before it is released is not ideal (as far as I understand it would be better if it was packaged once).
Microsoft Release Management tools
look ideal for the job, but are not supported with Visual Studio Online.
Is there a better way of handling our releases?

/waves hand.. These are not the tools you seek. You are looking for continuous integration.
Although CI has the word continuous in there, it does not mean "all the time, every checkin". It can easily refer only to those bits you want to release - -and the way to tell the system which bits you want released is to merge them to a Releases
branch.
If you do this, not only do you get all the joy of controlled CI, but you guarantee what you release is exactly what is controlled in your SCM - under the Releases branch, preferably tagged or otherwise noted as a particular release. That means you can also
rollback to a previous release by simply reverting to a previous release in your SCM!
Of course you don't have to let it happen automatically, you can set it up to build 'continually' and then remove the check on the SCM to see if any changes have been committed. You can replace this with the manual build button.

I am unable to sign into my account through Adobe Elements 12. I can sign in on Adobe's website, and through Revel online, and through my smartphone, however when I try to sign in through Adobe Elements 12 directly, the hourglass never stops turning, and

I am unable to sign into my account through Adobe Elements 12. I can sign in on Adobe's website, and through Revel online, and through my smartphone, however when I try to sign in through Adobe Elements 12 directly, the hourglass never stops turning, and turning.

Hi,
Have you tried working through this document - it does apply to Elements as well.
Sign in, activation, or connection errors | CS5.5 and later
If you still have problems you may need to contact the Adobe activation team - see the "Still need help?" link at the end of the document.
Good luck
Brian

Any program for mac to download videos from website like youtube, dailymotion, and any video online?

Any program for mac to download videos from website like youtube, dailymotion, and any video online?

TOAST!
http://www.roxio.com/enu/products/toast/default.html?gclid=CIDu-MaizLACFQFeTAoda nEfWA
Ciao.

Pls tell me how I can convert a PDF form to a Word doc, and have radio buttons etc work?

Pls tell me how I can convert a PDF form to a Word doc, and have radio buttons etc work? My PDF form did convert using Adobe PDF Export.... but the formatting is a schamozzle if I try to do anything with it. Most importantly, I need the check boxes and radio buttons to work in Word!

Checkboxes and radio buttons are form objects from Acrobat. There is no equivalent for these objects, with the way they were constructed, within Word.
I'm sorry for the inconvenience.
David

Is it Ok that newly purchased iMac gets Hot not just Warm, and smells sometimes like burnt plastic?? Just by using safari for mails And playing Radio??? Or i must throw it!! since Can't get any Direct contact to Apple!!!

IS IT OK that a newly purchased iMac -intel Lion- gets So HOT That it smells like Burnt Plastic,Not Warm but Hot!!??.. Just only by using safari-reading mails or newspapers- And playing Radio with VLC??!!!!...Or i must throw it away before it explodes??!!...Since Not possible to contact direct Apple to replace it !!!!..-they send me automatically from one adress to the other And No reply!!.THANKS!!

I don't know where you live or what you're talking about being sent from one address to another. Your iMac has a 90 day warranty with tech support and service, if needed. Apple has toll-free phone numbers in the US. You call that number, get to speak to a tech, give that person your computer's serial number and describe the problem. I suspect that there are similar arrangements in other parts of the world. That is "direct contact" with Apple. Have you tried to do that where you live? Wny are you trying to communicate in writing (by e-mail?)? In addition, if you don't have Apple Care you should immediately purchase it if you're still eligible. It'll extend your warranty to 3 full years.

WMP And XM Radio online

Similar Messages

Maybe you are looking for