WMP missing codec error msg

I am exporting an .mp3 to .wav using Quicktime Pro on Mac OS X. I then try to open the newly created .wav file on a PC with WMP 9. I get an error message saying I am missing the proper codec and the song won't play.
Any suggestions on how I can get this to work for me?

Convert the material to ProRes.
Drag your h.264 file into Compressor's Project window and drop it on the bar that says "drag settings and destinations here"
Go to the "settings" window.
Drill down to Apple>Formats>Quicktime>Apple ProRes 422 (LT)
Drag it over and drop it on the window where your you put your original file.
Set a destination.
Click submit.
This will transcode your h.264 to ProResLT. bring that file into FCP and life will be good. If you have dozens of these files, Compressor will easily handle batch processing.
While Compressor is cranking away on your file, open up the Compressor help file and read up. It is a very powerful utility.
good luck,
x

Similar Messages

Missing Codec Error?

Hey final cut people! I got a big problem!
I have a project in Final Cut Pro 7.0, and every time I open a project (any project, or just the application itself via the dock), I get an error message saying "Codec not found. You may be using a compression type without a corresponding hardware card." Then, after clicking "OK", I am greeted to a half-open project: the Browser and Viewer are open to the project, but the timeline and canvas aren't open, and are greyed out in the "window" menu. Thus, final cut is inoperable. I can open a clip in the browser and play it in the viewer, but that's about it.
All my footage is shot with a Nikon D5100, 1080p .MOV's.
My computer is a Late 2008 iMac, with 4gb of RAM and 175gb of free space on both my harddrive and external harddrive. It's running Lion 10.7.1
My final cut is version 7.0 and I am not able to update it (long story, I don't wanna get into it).
Quicktime player is acting normal, I am able to open the files in finder and play them in Quicktime, so it seems that any missing codecs aren't affecting it. I looked at other answers on here and they didn't seem to help. I looked in the Quicktime folder in ~/Library to check my codecs, and there are so many, I'm not sure if anything's missing.
This problem is very sudden, I haven't touched my Library folder in months and the last time I opened final cut, a few weeks ago, all was well. I am in dire need of a fix pretty soon, thanks in advance for all your help!!!

Convert the material to ProRes.
Drag your h.264 file into Compressor's Project window and drop it on the bar that says "drag settings and destinations here"
Go to the "settings" window.
Drill down to Apple>Formats>Quicktime>Apple ProRes 422 (LT)
Drag it over and drop it on the window where your you put your original file.
Set a destination.
Click submit.
This will transcode your h.264 to ProResLT. bring that file into FCP and life will be good. If you have dozens of these files, Compressor will easily handle batch processing.
While Compressor is cranking away on your file, open up the Compressor help file and read up. It is a very powerful utility.
good luck,
x

Bug fix for missing files error msg

from what i can tell there is still no bug fix for this issue that way too many people are getting.
why has nobody from Apple posted on this board discussing their plans for this issue?
why is this issue not noted on the tech support home page?
my bet is 95% of the people who are also getting this error don't use this message board and therefore are really clueless...

*from what i can tell there is still no bug fix for this issue that way too many people are getting.*
WHat bug/eror are you talingk about?
*why has nobody from Apple posted on this board discussing their plans for this issue?*
This is a user-to-user forum.
Besides, what good would it do if Apple posted, "we are working on it"?
Most likely, any problems with iTunes are being looked at.
why is this issue not noted on the tech support home page?
What issue? Maybe it's not a big enough problem to make a big deal out of.
my bet is 95% of the people who are also getting this error don't use this message board
If that's the case, why should Apple post something?

Sudden Increase in Missing Codecs

I have been working on a documentary shot on different media and have never once had a missing codec error. This past week, after assembling a rough cut of the trailer from all the assorted sequences the 'codec could not be found' error message starts cropping up and is rapidly spreading and I can't determine why or how to fix it. I have not introduced any new sort of footage the sequences hadn't already had - and what gets me is that previously fine sequences, when I go back to tweak the colour in FCP for example, then have codec errors too.
Most of the footage was shot on DV cameras, but it seems to be dogging the clips that are either 720 or 1080p. I reemphasise these clips have rendered dozens of times before. I'm drawing a blank on this one. All suggestions welcome, please, it keeps crashing!

We are having the same issue with dropped calls. I have an IPhone 4S and my husband has an IPhone 4. This has become increasingly worse. We never had these problems in the past. We have updated our software and towers but nothing helps. Something is going on with the signals!

Codec error, need footage/log notes from project.

Aright so I have CS6 and have updated my Premiere to 6.0.3. I am getting the "sequence has missing codecs" error that is plaguing CS6 users (I've been on a lot of sites/forums going over all the fixes). I opened the Adobe Help program and updated everything possible. I've uninstalled and re-installed and done the system clean as suggested on the Adobe help page multiple times. I've tried making new projects and then tried re-opening mine (apparently this worked for some people). I even made a copy of the project and tried to alter the lines of code for sequence codecs from I-Frame MPEG to AVI. I've re-booted my system after every attempt. I still cannot open the project.
I can however make a new project and import ALL of the footage. This seems strange to me but hey it works. Here is my problem. My producer (the project is a TV show pilot) left voluminous footage/log notes/color coded all of the footage for me in the original project (marking good and bad takes, separating interviews from b-roll, etc.) And I would very much like to be able to access all of those notes, she did this on her machine and I am now going to edit it on my station at home. Is there anyway I can get the footage in my new project to conform to all of those notes?
I'm close to the end of my rope here and time is running out, I'm on a pretty tight deadline and am also working another full time editing job during the day. Any help on either fixing Premiere so that I can open the original project or moving the footage notes from one project to another would be VERY APPRECIATED. Thank you for your time and help.

1st, What are you editing, and does your project match your video?
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
For Mac http://mediainspector.massanti.com/

TS3694 Trying to install new version of I tunes. Get the following error msgs:Itunes not installed correctly reinstall (Windows error 126), and missing file MSVCR80.DLL?

Trying to upgrade Itunes get the following error msgs: Itunes not installed correctly reinstall (Windows error 126) and missing file MSVCR80.DLL?

Click here and follow the instructions. If they don't work, perform a complete reinstallation (Windows XP, Windows Vista and newer).
(98972)

What is a pen problem.error msg reads as follows:print cartridges missing or not detected

error msg reads as followsrint cartridges missing or not detected

HP developers refer to the ink cartridge as a "pen".
Please read this post then provide some details. What printer model? What operating system? Cleaning the cartrdige contacts as shown in this document may resolve the issue.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

A/c doc not created and error msg "Business Area Miss-Match Check input"

Hi,
After creation of new Plant and Business area create a invoice , But my accounting document does't created and error msg show "Business Area Miss-Match Please Check Your Input". plz suggest me.
Regards,
Sohail

Dear Sohail Rahman,
Looks like the Business area has not been properly assigned.
Business area can be created for three combinations:
1. Business area by sales area
2. Business area by plant and division
3. Business area by plant and item division
In your case, check whether the business area is maintained for the combination of plant/division and plant/item division.
Hope this helps
Thanks
Murtuza

HT2731 Can not open Itunes on my computer,i get error msg MSVCR80.dill is missing from your computer . What do i do?

Can not open itunes on my computer,I get error msg MSVCR80.dill is missing from your machine. What do I do?

Work through the user tip: https://discussions.apple.com/docs/DOC-6562

Error msg at launch says "Registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. ... Please reinstall iTunes."

Each time I launch iTunes (latest version) on Windows 7 (w/ latest system updates) I receive the following error msg:
"Warning! The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes."
When I click on "OK" iTunes completes the launch process and the application functions properly. This error msg appears without fail every time I launch the app.
I have reinstalled iTunes four times and continue to receive this message. iTunes is set in the system Control Panel as the default program for all functions that iTunes uses. I never burn CDs or DVDs and have never attempted to do so on this machine. I have had iTunes on this computer since I bought it last November and never had a problem with it until 2 months ago when this message began popping up. I did not notice any action I took that caused this, in terms of creating conflicts.
I hope someone can assist me in finding a way to stop this annoying error! Thanks!
David

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

Why am I getting upgrade patch missing error msgs?

Why am I getting error msgs-upgrade patch missing-and I just bought a new product for $89?

Hi nylasteve,
What exactly are you doing when this error appears?
-David

Can't open I-Tunes or download error msg says MSVR80.dll missing?

unable to open ni-tunes on my computer
Error msg missing MSVCR80.dll
Had it on here a long ntime went to get the update stopped before it finished with the above msg. Tried everything I know can't get it to open or download

Click here and follow the instructions.
(98779)

Why did I get error msg that "MSVCR80.dll is missing" when I tried to update iTunes to 11.1.4? Never had such an issue before when updating iTunes.

Can anyone help with the question, above? Why an error msg that "MSVCR80.dll is missing" when attempting to update iTunes to version 11.1.4 on my laptop?

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
C:\Program Files (x86)\Common Files\Apple\Apple Application Support
and paste into:
C:\Program Files (x86)\iTunes
The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
tt2

HT1926 Error msg APS Daemon.exe MSVCR80.dll is missing

Earlier today I tried to install the newest version of iTunes and was unable to complete the installation process. Received the error message APS Daemon.exe that MSVCR80.dll is missing plus Error 7 Windows error 126 that iTunes not correctly installed.
I tried uninstalling & reinstalling iTunes but same error.
I installed and tried 3d party software RegCure that said it could repair MSVCR80.dll problems but did not work.
Currently I no longer have iTunes on my PC.
How do I correct this problem?
Not sure if it's related but I installed the latest Adobe Java update earlier this morning. Is there some conflict there?
Help.

Click here and follow the instructions.
(98745)

Quicktime won't play live webcast....error msg about plug in

Movie trlrs, advertisements, even archived webcasts can be viewed, but when I try to view a live webcast all I rcvd is the QT player loading the broadcast then stops. Clicking on the Q an error msg says plugin was found but an error has in the plugin has occurred. Help please!

What do I do?
Frankly, if you have deleted the original movie clips from your camera/camcorder and iPhoto, then it sounds as if you are up the proverbial creek without a paddle and there is nothing further that you can do.
Some facts:
For some reason, the movieclips are awful small (13-30 KB).
640 x 480
Codecs: H.264, AAC
While these facts are of little value without file duration information, as you yourself have already noted, the file sizes quoted are extremely small. A typical VGA H.264/AAC file of reasonable quality would normally have a combined total data rate in the 700 to 1,700 Kbps range depending on specific settings, profile, and level of the encoding software and could be even higher or lower depending on the quality levels required. Therefore, it is reasonable to assume that files in the 13 to 30 KB range only contain 104 to 240 Kbs and either have durations measured in fractions of seconds or do not actually contain enough data to be played. (E.g., the video data may be missing or the file is corrupted.) Thus, it is most likely that something was wrong with the workflow used to "export" your files to the external drive and when you ignored the fact that the files were not playing correctly, you closed the door on anything that you could do when you deleted the source files. (I.e., the normal workflow here is to copy the entire iPhoto library to the external drive, switch libraries, confirm the new library is working properly and only then delete the boot drive copy of the iPhoto library.)
OBS: When I try to convert the files into something else (AVI, MP4 whatever) either it comes with an error, nothing happens or the converted file wont open. This happens with various convert-programs.
If the data in the files is missing, then there is nothing to be converted by any application.

WMP missing codec error msg

Similar Messages

Maybe you are looking for