WMS 2012 and Touchscreen Support over Network Clients

Hi all,
I recently setup some virtual machines to operate with Dell Wyse E02 network clients. I purchased touch screen monitors to go with the zero clients, thinking that the E02's USB input would recognize the monitor as a keyboard and mouse. Upon testing the scenario,
I found that the touch screen capabilities do not work.
Is there anyway to configure WMS so that touch screens may be used over virtual desktops & network clients?
Thank you so much in advance for the help! 

Hi,
For the multipoint server issue, I recommend you can post in the dedicated Forum for more efficient support:
https://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=windowsmultipointserver
In addition, to install Windows MultiPoint Server 2012 Update Rollup 1, you can also download from here:
Windows MultiPoint Server 2012 Update Rollup 1 (KB2791647)
More detailed information about UR1, please refer to this article:
Updating PCs and Virtual Desktops for Update Rollup 1 of Windows Multipoint Server 2012
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang

Similar Messages

  • WMS 2012 and Dell Wyse E01 zero clients

    We have HP 6300 with Intel HD graphics. We are not able to start the server in normal mode. What graphic adapter can work together with Dell Wyse E01 ?

    Yes we have used drivers version 12 and 13 but we can't trust them. Our solution is Radeon HD 6450 graphic adapter, Wyse driver version 11 on WMS 2011. This works very good.
    So HP released a new computer. Deskpro 600 G1 with a new chipset. Then there is driverproblems again. We can put on 3 clients and it works, but when we connect the 4. or 5. client it won't work.
    On WMS 2012 we have tried this:
    Wyse driver version 13 for E01 and the built in graphic adapter Intel HD graphics 4600, but the screen resolution on the clients is wrong. On a screen like HP 2002LX we get a screen with 1024 X 768. 

  • Is there a solution to open the network locked iphone 6 Ali Sprint I've purchased iphone 6 from ebay and upon arrival I have to drag the device is locked and not supporting the network in Saudi Arabia

    Is there a solution to open the network locked iphone 6 Ali Sprint
    I've purchased iphone 6 from ebay and upon arrival I have to drag the device is locked and not supporting the network in Saudi Arabia

    There is no solution other than to contact Sprint and ask them if they will unlock it.

  • Which iPhone model can be bought from Japan store and SIMfree supporting 4G network in Oman?

    I am in Korea but found the iPhones in Japan store are the cheapest. I am a bit confused which model to buy and I would like to use it in Oman as I am going back permenently in Nov end. Also, I could not check which model supports 4G network in Oman as we don't have Apple Store in Oman !
    please help.

    You can use the phone in Sweden if it is unlocked, but you won't get a 4G signal because all the frequencies vary greatly between countries, especially European countries and Australia/New Zealand, so it won't be compatible and they can't cover all frequencies in one phone, which is why different models are sold in different countries.
    If you want to use your phone in Sweden on the Swedish 4G networks, then you'll have to purchase a new phone in Sweden that will work with the 4G network.  Your other phone will work, but NOT on 4G.

  • JRE and ODBC Support on Windows7 client enterprise

    Dear Friends
    Any idea wheteher JRE 1.6.1.34 and ODBC is supported using Windows7 Client enterprise.
    Any issue we might face.I know there are some concerns on the ODBC config.
    Regards
    Kam

    Any idea wheteher JRE 1.6.1.34 and ODBC is supported using Windows7 Client enterprise.
    Any issue we might face.I know there are some concerns on the ODBC config.Please see these docs.
    ODBC:
    Considerations Using The Oracle Client With Microsoft Products on 64 bit Windows Operating System [ID 781432.1]
    32-Bit ODBC Driver Not Listed in 64-Bit Microsoft ODBC Administrator [ID 308645.1]
    JRE:
    Recommended Browsers for Oracle E-Business Suite 11i [ID 285218.1]
    Recommended Browsers for Oracle E-Business Suite Release 12 [ID 389422.1]
    Thanks,
    Hussein

  • Problems opening and saving PNG over network with CS2 and CS3

    using os10.4.11
    photoshop CS2 or CS3
    I've recently tried to save images in PNG format,  small (no more than a couple hundred kilobytes) and found that whenever I tried to save to the server it would hang photoshop and require a force-quit. Saving the same file to the desktop works fine. Copying said file to the network and then trying to open that PNG from the server results in a photoshop hang, while opening that same file from the desktop works fine. I know all about the fact that Adobe doesn't support working over a server, but that's never been an issue at my workplace in all the years I've worked with (never had problems saving/opening any format, no corrupted files ever). If I try to open that same PNG from the server with CS2, same result. If I try to open it over the server using Photoshop CS, or version 7, however, it opens just fine. If I copy the Photoshop CS version of the PNG plugin and replace the PNG plugin installed with CS3 by default, then it seems to work and I can now open and save PNGs anywhere with no problems. Has anyone else had this problem? I can see that the file size of the PNG plugin has changed version to version, so something about it has changed. It seems as though there is something defective about the ones installed with CS2/3, and just copying the CS version into my CS3 folder clears up the problem.
    Also, the problem is not limited to my computer. Other macs that try to open PNG files from the server using CS3 or 2 also hang.

    Yes, we're a prepress company moving around probably a few dozen gb of data per day, saving PSD, TIFF, EPS, JPEG, all kinds of formats. It's the first time I've had a client requesting PNG files, and so the issue has come to light. This is the first time I've ever seen any kind of issue opening/saving across our network in 8 years. (the only time I've ever seen a corrupt file was a 1.6gb image that didn't copy correctly, and that wasn't a photoshop-related corruption, but an OS drag/copy of the file)
    I'm not sure if I'll be able to find someone with OS 10.5 or some other version to see if they cause problems. If anyone else reading this who works over a network can test a PNG open/save over their network and list their OS and Photoshop version it may help. I'm going to see if I can find some other computers to try it out on in the meantime and mention it to IT.

  • ITunes Library and Time Machine over network

    Hello everyone,
    I've got a 2008 unibody MacBook running Mountain Lion, I've been using Time Machine on a SeaGate external HDD, in addition to storing my iTunes Media on the drive.  This external drive was always plugged into my computer via USB.  Well the drive crashed so I've been looking into alternatives.  I bought an Extreme Base Station and was hoping I'd be able to plug a similar external drive and achieve the same results wirelessly.  After some research, it seems this is very unreliable.  I've also come across a WD MyBookLive (NAS) which has a lot of software built in to act as an iTunes server and work with Time Machine (which sounds perfect), however I haven't gotten either of those functions to work.  I'm guessing this might be a firmware issue on the MyBookLive, but it's also not letting me update it.  What can you guys suggest?  What would be the best way to make this work?  Thanks in advance!

    I could see this being a real issue for me. Is there any news on this front?
    Here's my background/intention with TM:
    1. I purchased a brand new MacBook for a family member, it's her first Mac experience
    2. My wife and I have have MacBooks which we adore (Plus 3 iPhones in the family, Apple TV, AirTunes, the works -- Don't brand me as a "Mac Hater" which these forums love to do as soon as you point out an oversight. let's stay on topic, please!!)
    3. We have a 500GB USB drive on my Wife's system for TM use
    4. I have a 150GB USB drive for my own TM use.
    5. In an effort minimize the amount of USB devices needed, I want to share my wife's 500GB drive for all of us to use TM with it. Seems logical, no?
    6. Well, it's a MacBook it is mounted on so it will go to sleep at times, even go on the road.
    Now, before people get excited (which they love to do here when you point out a potential issue with our beloved Macs) I fully understand the drive will not always be available. This is already the case as my TM drive is at home and I am at work with my MacBook as I type this. TM is not freaking out and will work happily when I mount the TM drive.
    However, will my stepdaughter have a corrupted backup if she has the remote TM drive mounted when my wife puts it to sleep? Even if no backup is running?? My SD is rather sharp, she understands that to do a backup she needs to mount the share and click "back up now" on TM. But should she forget to unmount when she's done is in for disaster??? That wouldn't make sense but from I'm reading here it sounds like the case?

  • Help! Saving an image to stream and recreating it on client over network

    Hi,
    I have an application that uses JDK 1.1.8. I am trying to capture the UI screens of this application over network to a client (another Java app running on a PC). The client uses JDK 1.3.0. As AWT image is not serializable, I got code that converts UI screens to int[] and persist to client socket as objectoutputstream.writeObject and read the data on client side using ObjectInputStream.readObject() api. Then I am converting the int[] to an Image. Then saving the image as JPEG file using JPEG encoder codec of JDK 1.3.0.
    I found the image in black and white even though the UI screens are in color. I have the code below. I am sure JPEG encoder part is not doing that. I am missing something when recreating an image. Could be colormodel or the way I create an image on the client side. I am testing this code on a Win XP box with both server and client running on the same machine. In real scenario, the UI runs on an embedded system with pSOS with pretty limited flash space. I am giving below my code.
    I appreciate any help or pointers.
    Thanks
    Puri
         public static String getImageDataHeader(Image img, String sImageName)
             final String HEADER = "{0} {1}x{2} {3}";
             String params[] = {sImageName,
                                String.valueOf(img.getWidth(null)),
                                String.valueOf(img.getHeight(null)),
                                System.getProperty("os.name")
             return MessageFormat.format(HEADER, params);
         public static int[] convertImageToIntArray(Image img)
             if (img == null)
                 return null;
            int imgResult[] = null;
            try
                int nImgWidth = img.getWidth(null);
                int nImgHeight = img.getHeight(null);
                if (nImgWidth < 0 || nImgHeight < 0)
                    Trace.traceError("Image is not ready");
                    return null;
                Trace.traceInfo("Image size: " + nImgWidth + "x" + nImgHeight);
                imgResult = new int[nImgWidth*nImgHeight];
                PixelGrabber grabber = new PixelGrabber(img, 0, 0, nImgWidth, nImgHeight, imgResult, 0, nImgWidth);
                grabber.grabPixels();
                ColorModel model = grabber.getColorModel();
                if (null != model)
                    Trace.traceInfo("Color model is " + model);
                    int nRMask, nGMask, nBMask, nAMask;
                    nRMask = model.getRed(0xFFFFFFFF);
                    nGMask = model.getRed(0xFFFFFFFF);
                    nBMask = model.getRed(0xFFFFFFFF);
                    nAMask = model.getRed(0xFFFFFFFF);
                    Trace.traceInfo("The Red mask: " + Integer.toHexString(nRMask) + ", Green mask: " +
                                    Integer.toHexString(nGMask) + ", Blue mask: " +
                                    Integer.toHexString(nBMask) + ", Alpha mask: " +
                                    Integer.toHexString(nAMask));
                if ((grabber.getStatus() & ImageObserver.ABORT) != 0)
                    Trace.traceError("Unable to grab pixels from the image");
                    imgResult = null;
            catch(Throwable error)
                error.printStackTrace();
            return imgResult;
         public static Image convertIntArrayToImage(Component comp, int imgData[], int nWidth, int nHeight)
             if (imgData == null || imgData.length <= 0 || nWidth <= 0 || nHeight <= 0)
                 return null;
            //ColorModel cm = new DirectColorModel(32, 0xFF0000, 0xFF00, 0xFF, 0xFF000000);
            ColorModel cm = ColorModel.getRGBdefault();
            MemoryImageSource imgSource = new MemoryImageSource(nWidth, nHeight, cm, imgData, 0, nWidth);
            //MemoryImageSource imgSource = new MemoryImageSource(nWidth, nHeight, imgData, 0, nWidth);
            Image imgDummy = Toolkit.getDefaultToolkit().createImage(imgSource);
            Image imgResult = comp.createImage(nWidth, nHeight);
            Graphics gc = imgResult.getGraphics();
            if (null != gc)
                gc.drawImage(imgDummy, 0, 0, nWidth, nHeight, null);       
                gc.dispose();
                gc = null;       
             return imgResult;
         public static boolean saveImageToStream(OutputStream out, Image img, String sImageName)
             boolean bResult = true;
             try
                 ObjectOutputStream objOut = new ObjectOutputStream(out);
                int imageData[] = convertImageToIntArray(img);
                if (null != imageData)
                    // Now that our image is ready, write it to server
                    String sHeader = getImageDataHeader(img, sImageName);
                    objOut.writeObject(sHeader);
                    objOut.writeObject(imageData);
                    imageData = null;
                 else
                     bResult = false;
                objOut.flush();                
             catch(IOException error)
                 error.printStackTrace();
                 bResult = false;
             return bResult;
         public static Image readImageFromStream(InputStream in, Component comp, StringBuffer sbImageName)
             Image imgResult = null;
             try
                 ObjectInputStream objIn = new ObjectInputStream(in);
                 Object objData;
                 objData = objIn.readObject();
                 String sImageName, sSource;
                 int nWidth, nHeight;
                 if (objData instanceof String)
                     String sData = (String) objData;
                     int nIndex = sData.indexOf(' ');
                     sImageName = sData.substring(0, nIndex);
                     sData = sData.substring(nIndex+1);
                     nIndex = sData.indexOf('x');
                     nWidth = Math.atoi(sData.substring(0, nIndex));
                     sData = sData.substring(nIndex+1);
                     nIndex = sData.indexOf(' ');
                     nHeight = Math.atoi(sData.substring(0, nIndex));
                     sSource = sData.substring(nIndex+1);
                     Trace.traceInfo("Name: " + sImageName + ", Width: " + nWidth + ", Height: " + nHeight + ", Source: " + sSource);
                     objData = objIn.readObject();
                     if (objData instanceof int[])
                         int imgData[] = (int[]) objData;
                         imgResult = convertIntArrayToImage(comp, imgData, nWidth, nHeight);
                         sbImageName.setLength(0);
                         sbImageName.append(sImageName);
            catch(Exception error)
                error.printStackTrace();
             return imgResult;
         }   

    While testing more, I found that the client side is generating color UI screens if I use JDK 1.3 JVM for running the server (i.e the side that generates the img) without changing single line of code. But if I use JDK 1.1.8 JVM for the server, the client side is generating black and white versions (aka gray toned) of UI screens. So I added code to save int array that I got from PixelGrabber to a text file with 8 ints for each line in hex format. Generated these files on server side with JVM 1.1.8 and JVM 1.3. What I found is that the 1.1.8 pixel grabber is setting R,G,B components to same value where as 1.3 version is setting them to different values thus resulting in colored UI screens. I don't know why.

  • Understanding that the iPhone 5 won't support simultaneous voice and data transmissions over Verizon and Sprint LTE networks will it ever be able to support VoLTE (Voice over LTE)?

    Understanding that the iPhone 5 won’t support simultaneous voice and data transmissions over Verizon LTE network will it ever be able to support VoLTE (Voice over LTE)? Could Apple add VoLTE support later on? It seems pretty clear the MDM9615 chip supports VoLTE but the baseband software by Apple does not. Could Apple add it to the baseband later on? When will Verizon turn-on/enable VoLTE?
    Referral Link: https://discussions.apple.com/message/19614226#19614226

    Well in my research Verizon is already testing Voice Over LTE in select markets via a few news releases, and rumor has it that a few smartphones are already VoLTE ready. http://news.verizonwireless.com/news/2011/02/pr2011-02-09f.html

  • Unable to record on my Thin Client on WMS 2012.

    I really need help here, I have up to 65 thin clients and 4 vm running WMS 2012 on WS 2008 R2 and they are all licensed. The issue is this, on the clients, i am unable to record. Its not detecting the Headphones mic, but it could speak out with the headphone-speaker
    and i am confused right now. I need help. May God bless every one reading and replying this to help me solve this issue.Amen.Thanks

    Hi Philippe,
    I really appreciate your effort. I don't understand the gear in your response saying with certified driver and such and using the same gear with a windows laptop/com... to rule out the thin client firmware, Please can you  explain a little bit with
    basics. For the firmware update i will try it in one of it. Thanks, will be expecting a feedback from you and anyone else can also comment. I want to be sure of the firmware thin before making any changes because when doing any firmware upgrade/update, someone
    needs to be careful.
    Regards,
    Kunle.

  • Does Windows Server 2012 support Remote Desktop Client 6.1?

    Hi,
    Does Windows Server 2012 support Remote Desktop Client 6.1? IU can't find a link anywhere on the Microsoft site to confirm this!
    Thanks,
    Jim

    this should help you
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/b664ddaf-6c11-49e2-8a69-0df3b8ef13a1/server-2012r2-rds-farm-with-xp-and-windows-vista-clients?forum=winserverTS

  • HT3986 Where can i download the driver for my network card? i have a macbook pro mid 2012, and are using windows 7 ultimate

    Where can i download the driver for my network card? i have a macbook pro mid 2012, and are using windows 7 ultimate

    uhm hey guys,
    idk where else to get help so ima try here,
    i got windows 8 installed with bootcamp on my macbook pro late 2010 (5, 5) and theres no sound coming out of it, so i installed an nvidia audio driver (idk, it could be the incorrect one) but i have nvidia GeForce 320 on my macbook.
    do you know what i should install ?
    but when i go onto my osx the sound is fine, so i figured im missing something on windows 8
    Orrrr could i just go out and get parallels and hope it doesn't get the same problems?

  • My itunes account was broken into in April 2012 and my Apple ID is still disabled and I can't get into my apple account at all. I have reset everything a million times and the phone support *****!!! What now???

    My itunes account was broken into in april 2012 and my apple ID is still disabled and I can not get into my account. What do I do to get it enabled?

    There is no phone support for itunes.
    Click Support at the top of this page, then click Contact Apple Support

  • SCCM 2012 and 2012 sp1 client cache not cleaning itself

    I work on a University campus that deploys 100's of software titles to lab computers.  Since last summer, we have been using Config Man 2012 and upgraded to 2012 SP1 in early Jan.  Recently we started noticing 160GB hard drives filling up in locations
    that get most of our software.  When looking into it, the ccmcache folder has 50GB+ of data in it even though the cache size is set to 30GB.  I looked at the folders in the cache and many of them are from last summer when the apps were first
    downloaded and installed.  NONE of these apps are set to persist.  My understanding is that they should have been cleaned up automatically after 24 hours as space was needed.  Either way, shouldn't the cache folder be at or smaller than the
    cache size setting? 
    I have talked to others that have seen similar problems with 2012 of the cache folder growing beyond the max, but they don't have the software load that we do, so they are not filling their drives.  If I manually tell Confi Man client to delete the
    cache files, I free up 50GB or more, but manual intervention isn't a great option.
    Any ideas on where to troubleshoot this issue or what settings might be messed up that allows for this?
    Thanks

    How much of this is software updates?  Like in 2007 software updates are not counted against the cache size:
    "You can configure the location and amount of disk space that Windows Configuration Manager clients use to store temporary files for when they install applications and programs. Software updates also use the client cache, but software updates
    are not restricted by the configured cache size and will always attempt to download to the cache"
    https://technet.microsoft.com/en-us/library/gg712288.aspx
    http://www.sccm-tools.com http://sms-hints-tricks.blogspot.com

  • SCOM 2012 and NAP 802.1X Enforcement - Event ID: 6276 during client startup - False positive

    Hi
    We are running SCOM 2012 and we are using NAP 802.1X enforcement with HP IDM. We are getting multiple event ID: 6276's entries in SCOM during computer start-up, which is false positives as it seems the computer is put into the Non-Compliant network until
    its true state is reported. Is there a way to suspend these events, in order for us to only receive valid Non-Compliant events?
    Regards, Francois
    Francois Vorster

    Hi,
    You can make dot3svc dependent on NAP agent so that NAP agent starts up completely before the first 802.1X authentication attempt is tried. This should reduce the number of re-authentication attempts.
    -Greg

Maybe you are looking for