WMS and Oracle ERP integration.
All,
We are working on an integration project where in we are using Oracle Apps as the ERP System. With this Oracle ERP, we want to integrate any WMS/SCM system [red prairie, manhattan, oracle etc].
Are there any open APIs/Interfaces to Oracle Apps, where in, we can call these from our code [may be Oracle stored procs or .NET] and all the required data are populated in the ERP system, which can then be used for further processing..
Your help is highly appreciated.
Thanks,
Shridhar.
Does Oracle's WMS module not meet your needs? It would already be integrated.
As for APIs there is a manual that outlines all the available APIs for manufacturing. Look at the Discrete Manufacturing section to locate it.
Similar Messages
-
Difference between Oracle Apps DBA and Oracle ERP Consultant
Dear All,
Can any please give me some idea about the difference between Oracle Applications DBA (apps dba) and Oracle ERP Consultant.
Which career is most rewarding one in terms of Salary, Job Security and Least amount of work
I am working as Core DBA which career will be most suited to me and easy to learn
Which Module of Oracle ERP is most used and would be suited for me
I have done Oracle 10g DBA certification what certifications would you recommend to me
Any help in this regard is highly appreciated.
Regards,
Asifuser635150 wrote:
Dear All,
Can any please give me some idea about the difference between Oracle Applications DBA (apps dba) and Oracle ERP Consultant.
Which career is most rewarding one in terms of Salary, Job Security and Least amount of workThat's entirely up to you. No one but you knows what you consider important, what you find interesting, what you find satisfying.
I am working as Core DBA which career will be most suited to me and easy to learn
Which Module of Oracle ERP is most used and would be suited for me
I have done Oracle 10g DBA certification what certifications would you recommend to me
Any help in this regard is highly appreciated.
Regards,
AsifMy original comment aside, I find these comments from you rather, uh, "enlightening".
"Which career is most rewarding one in terms of . . . Least amount of work"
"which career will be . . . easy to learn"
Since "easy" and "least work" seem important to you, I'd suggest a career in something besides IT. I could make some specific suggestions but run the risk of insulting people who work in those areas. -
Oracle ERP Integration with IdM 7
Hi Geeks,
I am integrating Oracle ERP with IdM7 and when I provisiong for a user its working fine, But when I try to modify the users responsibilities its throwing me an error
�AN ERROR OCCURRED MODIFYING USER 'TEST123' ON RESOURCE 'ORA_RESOURCE_ERP'.
ORA-01422: EXACT FETCH RETURNS MORE THAN REQUESTED NUMBER OF ROWS ORA-06512: AT LINE 1 COM.WAVESET.UTIL.WAVESETEXCEPTION: AN ERROR OCCURRED MODIFYING USER 'TEST123' �
Has anyone faced the this issue, Let me know your inputs to over come this err.
Thanx in Advance
Regards
JeyanthI suspect, there exist some duplicate roles on Oracle ERP side.. check the APPS.fnd_user table once.
Regards
Phanindra Banda -
I Have to install Oracle ERP R12 on a Linux machine but the issue is that we are already running ERP 11.5.10.2 on same Machine, my Question is that how we will take care of Kernel parameters for both the releases on same machine as R12 suggests different Kernel parameters to be set, or can we run R12 on the same Kernel Parameters which are already set for 11.5.10.2, please help me out experts, this Question is for Linux4 machine.
Thanks
MehboobHi,
If the values for R12 are higher then you need to adjust the kernel parameters values and it should work for both 11i and R12.
Thanks,
Hussein -
Hello,
Does Oracle document management provides integration with Oracle ERP version 11i /R12 ? If so where can i get more information. Please help..
Thanks
ArunHi,
Yes, there is an appropriate adapter available. You can find some more info on:
http://www.oracle.com/technetwork/middleware/content-management/oracle-ecm-ebusiness-attachments-134055.pdf?ssSourceSiteId=otncn
Best regards,
Velimir -
Retek and Oracle Financials Integration
Hi,
We are planning to implement Retek for the retail stores and Oracle Financials for the back end operations. Can some one tell me if these two products are seamlessly integrated? For example will the data flow from Retek to say AP or AR without having to develop any interfaces.
Thanks in advance.
AmitOne may benefit from this Metalink document.
Regards, Erik Ykema
Subject: Oracle Retail E-Business Suite Integration Guide
Doc ID: Note:458221.1 Type: WHITE PAPER
Last Revision Date: 02-NOV-2007 Status: PUBLISHED
In this Document
Abstract
Document History
Oracle Retail E-Business Suite Integration Guide
Applies to:
Oracle Retail Invoice Matching - Version: 12.0.5 to 12.0.5
Oracle Retail Merchandising System - Version: 12.0.5 to 12.0.5
Information in this document applies to any platform.
Abstract
This is an Oracle Retail internal “services-only” document not for general customer release. It is intended for the systems analysts and other members of the integration team contracted to assist a retailer to integrate Oracle Retail applications with Oracle E Business Suite applications.
Document History
Author :
Create Date 11-Sept-2007
Update Date dd-mon-yyyy
Expire Date dd-mon-yyyy (ignore after this date)
Oracle Retail E-Business Suite Integration Guide
This document describes considerations for integration of Oracle Retail applications with the Oracle Financials applications of Oracle E Business Suite. This document provides information for the implementation team to assess product requirements, configuration opportunities, and constraints related to this integration. -
Oracle Project Management and Oracle HCM integration????
Is there any benefits of Oracle Project Management for users of Oracle HCM?? Can they be integrated and how?
ERP systems were built because you could use various products like Fin, HCM, CRM, Project accounting etc seamlessly as all are built by the same provider and you will have less interface headache.
So, based on what your company's requirements, you can choose to implement one or more of the products. -
OIM and Oracle ESSO Integration
Hi All,
Need some help.
Currently I already setup Oracle ESSO Server (Provisioning gateway, password reset, logon manager) with MS AD 2003 in same server.
Then I setup OIM 9.0.1 then I try to integrate provisioning gateway to OIM.
I got this error:
2009-04-08 05:35:07,546 INFO [STDOUT] No Execution time provided.
Default Execution Time set to 'NOW'.
2009-04-08 05:35:07,546 INFO [STDOUT] Sending command Instruction to Web Service
2009-04-08 05:35:10,968 DEBUG [org.jboss.ejb.plugins.LRUEnterpriseContextCachePolicy] Running RemoverTask
2009-04-08 05:35:10,968 DEBUG [org.jboss.ejb.plugins.LRUEnterpriseContextCachePolicy] RemoverTask, PassivatedCount=0
2009-04-08 05:35:10,968 DEBUG [org.jboss.ejb.plugins.AbstractInstanceCache] removePassivated, now=1239143710968, maxLifeAfterPassivation=1200000
2009-04-08 05:35:10,968 DEBUG [org.jboss.ejb.plugins.LRUEnterpriseContextCachePolicy] RemoverTask, done
2009-04-08 05:35:14,828 DEBUG [com.thortech.xl.scheduler.core.quartz.XLJobStoreCTM] MisfireHandler: scanning for misfires...
2009-04-08 05:35:14,828 DEBUG [org.quartz.impl.jdbcjobstore.StdRowLockSemaphore] Lock 'TRIGGER_ACCESS' is desired by: QuartzScheduler_NON_CLUSTERED_MisfireHandler
2009-04-08 05:35:14,828 DEBUG [org.quartz.impl.jdbcjobstore.StdRowLockSemaphore] Lock 'TRIGGER_ACCESS' is being obtained: QuartzScheduler_NON_CLUSTERED_MisfireHandler
2009-04-08 05:35:14,828 DEBUG [org.quartz.impl.jdbcjobstore.StdRowLockSemaphore] Lock 'TRIGGER_ACCESS' given to: QuartzScheduler_NON_CLUSTERED_MisfireHandler
2009-04-08 05:35:14,843 DEBUG [com.thortech.xl.scheduler.core.quartz.XLJobStoreCTM] Found 0 triggers that missed their scheduled fire-time.
2009-04-08 05:35:14,843 DEBUG [org.quartz.impl.jdbcjobstore.StdRowLockSemaphore] Lock 'TRIGGER_ACCESS' retuned by: QuartzScheduler_NON_CLUSTERED_MisfireHandler
2009-04-08 05:35:21,859 INFO [STDOUT] The add_credential execution failed. Error: Error in Sending instruction from the provisioning manager in API Command An invalid security token was provided.
2009-04-08 05:35:21,875 INFO [STDOUT] com.passlogix.integration.provision.client.CommandInvocationException: Error in Sending instruction from the provisioning manager in API Command An invalid security token was provided
2009-04-08 05:35:21,875 INFO [STDOUT] at com.passlogix.integration.provision.client.apicommand.APICommand.invoke(APICommand.java:176)
2009-04-08 05:35:21,875 INFO [STDOUT] at com.passlogix.integration.provision.client.apicommand.APICommandInvoker.invoke(APICommandInvoker.java:108)
2009-04-08 05:35:21,890 INFO [STDOUT] at com.passlogix.integration.provision.client.ProvisionManagerClientImpl.executeRequest(ProvisionManagerClientImpl.java:290)
2009-04-08 05:35:21,890 INFO [STDOUT] at com.passlogix.integration.provision.client.ProvisionManagerClientImpl.request_credential_addition(ProvisionManagerClientImpl.java:266)
2009-04-08 05:35:21,890 INFO [STDOUT] at com.passlogix.integration.provision.OIM.OIMInterface.addPasslogixCredential(OIMInterface.java:71)
2009-04-08 05:35:22,250 INFO [STDOUT] ... 135 more
2009-04-08 05:35:22,250 INFO [STDOUT] Add Credential Command failed to get invoked
Please help
Thanks BeforeIs OIM-OAM integration mandatory? It depends on the end user's requirements.
OAM is for Web Based SSO as you mentioned. If all you would need is SSO then you do not need OIM-OAM integration.
However, if you need user self service and password reset features you need OIM-OAM integration. By doing so you can enable OIM's user self service and password reset capabilities for your OAM users.
Regards,
840732 -
BPEL and Oracle financials Integration
Hi there,
we're at the beginning of scoping an integration project and I'm trying to get a handle on what options we have for integration with Oracle Financials. I've been referred to the BPEL Process Mgr - does anyone know of its abilities to integrate with Financials ? Does it use a JCA ? What other integration options do I have ? All help appreciated...
TIA,
aidanThe Oracle Applications adapter is installed as part of the base install, allthough licensed seperately. Adapters to other packaged applications (SAP, Peoplesoft etc) are seperate installs (and also licensed seperately).
The Oracle apps (Ebusiness Suite) adapter uses the common interface points of the applications to interface with them, and expose them in a friendly format, allowing you to browse the available modules and functions and select which ones you want to use in your BPEL process.
HTH -
Oracle JAAS with roles from database tables and Oracle SSO integration
I have the following requirement for user authentication and authorization. The applications are build using ADF Faces and BC4J. User authentication should be done using Oracle SSO. User roles and functions will be stored in custom tables. These roles will be used on ADF application pages to restrict access to the UI components on a page. Example: User will "Employee" role cannot create a new employee; however, user with "HR" role can create a new employee.
In this case, "Create" button will be visible on the ADF page.
1. How can we use Oracle JAAS to use custom tables for roles instead of using flat XML files?
2. How does ADF applications use these roles to restrict components on a page?
3. For authentication, I guess we should be able to use SSO and integrate with Oracle JAAS?
Thanks.Hi,
I can give you the answers to 1 and 2 but haven't tried 3.
1) Oracle OC4J since 10.1.3.1 has a database LoginModule that is explained in the OC4J security guide.
I have a how-to document in review that will be published probaby next week and that explains how to set this LogiNModule up for JDeveloper and stand alone OC4J, though the OC4J documentation is pretty good as well
http://download-west.oracle.com/docs/cd/B32110_01/web.1013/b28957/loginmod.htm#BABCDDAI
2) Create a managed bean with boolan methods like isUserManager, isUserEmployee, isUserTechnician etc. In this methods check for the security role on teh request object's isUserInRole() method. Then access this methods from the disabled or rendered property using ExpressionLanguage
A custom Login ModuleDoesn't use Oracle JAAS but plugs into it. So I am not sure if SSO would work with this because the custom LoginModule wouldn't get a username password pair but only a username that it has to trust.
Frank -
Integration between SAPAPO and Oracle
Hi Experts,
Here, we have a customer who wanna make planning using SAP APO, and the execution system is Oracle ERP system, they want to make seamless integration between SAP APO system and Oracle ERP system, are there any ones who know how to make it? Could you please give me some ideas or show me some document links? if you can show me one example, that will be good.
Thanks a lot.
SuHi Su,
I donot have any best practices, still let me try to put my views on this.
The things required for planning in APO.
1) Master data -
Can be created alone in APO -- yo uma yneed to use BAPIs to create mass numbers.
2) Transaction data -
We were doing this incase of stocks. we are using BAPIs to create stocks of type (stock,Punchase orders,Purchase requisitions). Legacy system calls this BAPI and they load data with spread sheets to create in APO.Please check if is it is possible incase of Sales orders & other transaction data.
3) Sending planning results to Legacy : Here you will have to write cutom programs to send results back to Legacy (For example IDocs).
4) Apart from above you may need to develope few custom reports to ensure consistency b/w legacy & APO (to compliment /SAPAPO/CCR functionality).
Hope this gives atleast an idea on what has to be done.
Best Regards,
Deepthi -
ERP integrator Tasks - Data Load Rule
Hi
We are facing issues with ERP integrator 11.1.2.2.
We don't have some of the options available in in ERP integrator Data Load Rule Task.
Earlier we have the Add option in Data Load Rule under Source Filter -- Segment Values and all ERP integrator task screens are different as earlier.
Please find attached Screen shots of Current and Earlier.
Actually we have applied path for HFM .
Now its showing
HFM version --11.1.2.2.303.3959
ERP integrator - 11.1.2.2.0.0
After applied path this issue is coming.
Please guide us what we have to do to resolve this issue.
Edited by: Nagarjuna Reddy on May 22, 2013 12:31 PMNo i did not apply any patch for ERP integrator.
But we have applied path for HFM..Is it effecting to ERP integrator?? -
ISA-95/B2MML centric interface between Oracle ERP and MES
Hi :
A customer wants to know if we have any ISA-95/B2MML centric interface between Oracle ERP and Microsoft Exchange Server. Specifically, they are interested in learning about compliance to OPC UA standards in such integration.
Please reply if anybody has any information. Your help will be greatly appreciated!
Thanks and Best Regards,
HarrisHello,
I guess this is not the right forum to address this query. Please post this question in some E-Business Suite related forum..
Let me know.
Rgds,Ramesh -
FDMEE integration with Oracle ERP
Hi Experts,
I'm new to FDMEE. I just got myself comfortable with FDMEE, but not clear with the source system tables.
Is it possible to integrate data from any other modules enlisted in Oracle ERP other than GL tables.
I just want to know whether it is possible to integrate data from inventory module in Oracle ERP.
Can someone share some documents related to this issue, and clarify whether data from inventory module can be integrated.
I have done some ground searches, but ended nowhere.
Thanks In advanceThen you should follow instructions in section Customizing ODI to Load Data from a Custom Source of admin guide.
For configuring ODI Topology, I would recommend creating dataserver/physical server/logical schema for your EBS and not reuse EBS_DATA_SERVER which is used for prepackaged EBS GL integration. Then you can reverse your VIew or any table you are going to use in the ODI Interface
To populate the OI Table you can use Model for Open Interface Adapter: AIF_OPEN_INTERFACE -
I am trying to select the correct ledger from the Oracle E-Business Suite. Within the ERP Integrator area in EPMA, I am trying to select the ledger, when I select the entity for integration.
Select Source Accounting Entity for Integration screen returns no rows.
Any advice?
I was thinking it has to do something with ODI and specifying which Oracle E-Business Suite segments/books to pull data from. Has anyone seen a setting for a Oracle EBS segment/book in the topology manager?
Edited by: user8702914 on Oct 22, 2009 10:39 AMHello,
FDM is supported to Oracle RAC but not the ERP Integrator. If you see the 11.1.1.3 support matrix oracle has updated on the last tab telling that FDM will support. ERP Integrator is a new product and it was never designed or tested to be on Oracle RAC. This is what the information we got from the Oracle support when we were doing our in house testing for 11.1.1.3
Thanks
Maybe you are looking for
-
Protocols involved in carrying media packets while media traversal in a A/V call!
Hi , Am really confused about the the protocols..involved in the media traversal. Theres a whole lot protocols involved in the media traversal like UDP[fire and forget], TCP[handshake needed], SRTP[securing the RTP]. the scenario is when user A init
-
Help with setting a 2nd Standby Database
Hi, I have an active DataGuard 11gR2 with a physical standby actively running on Linux. Now, I need to add a 2nd physical Standby database (for reads only) to this environment, can someone please point to a resource/document which discusses the steps
-
Exception after switching weblogic 10 To oracle 10g
Hi Folks I have switched weblogic from 10.0 to oracle 10g ( 10.3 ), I got following exception on deploying the project, while in earlier weblogic 10.0 version, it was working fine. Nov 19, 2010 4:12:07 PM com.sun.xml.ws.transport.http.servlet.WSServl
-
I just wanted to let someone know that sample code for one of the workspace demos needs a change...in the no_shipping_demo script, it tries to run noShippingPopulate.sql when it should be no_shipping_populate.sql Then the demo works just fine. I trie
-
Safe to update or should I wait for 2.01, lol?