WMS - Cycle Counts - are generating with no user task type

Hi,
I have configued Cycle counts and it is creating tasks with no user task type.
That too .. this is happening for some tasks .. others are created correctly.
As there is no user task type .. It is not getting displayed on Gun.
Can anyone pls help me .. Thanks in advance.
Regards,
Naveen S

Hi,
I have configued Cycle counts and it is creating tasks with no user task type.
That too .. this is happening for some tasks .. others are created correctly.
As there is no user task type .. It is not getting displayed on Gun.
Can anyone pls help me .. Thanks in advance.
Regards,
Naveen S

Similar Messages

  • Logs are generating with owner and group as 'root'

    Hi,
    In our newly installed and configured Oracle application server(10.1.3.5), the logs are generating with owner and group as 'root'.
    Location: $ORACLE_HOME/Apache/Apache/logs
    -rw-r----- 1 root root 6700 Apr 3 02:03 access_log.1364947200
    -rw-r----- 1 root root 430 Apr 3 02:04 error_log.1364947200
    We have configured it on port 80. For this the '.apachectl' ownership and permissions are changed as below:
    -rwsr-s--- 1 root dba 1703780 Jul 21 2009 .apachectl
    Kindly let me know what are the changes to be made, for the logs to be generated with the group as 'dba' instead of 'root'.
    Thanks.
    Edited by: 985284 on Apr 3, 2013 3:14 AM
    Edited by: 985284 on Apr 3, 2013 4:22 AM

    Ok - that is quit weird then. If you want to run the HTTP Server on a privileged port, you basically change the ownership of the .apachectl executable :
    cd ORACLE_HOME/Apache/Apache/bin
    chown root .apachectl
    chmod 6750 .apachectlas per [url http://docs.oracle.com/cd/B25221_05/core.1013/b25209/ports.htm#CIHJEEJH]documentation.
    Your user and group directive should be set to :
    User oracle
    Group dbaUpon starting, the http server would start as root and then switch the effective userid of the process from root to oracle. In the process list (ps -ef | grep httpd), you should see oracle.
    Do you have the same configuration and what do you see in the process list?

  • WMS cycle count using 'this level' cost for valuation

    Hello all,
    I have a client on 12.1.3
    They have reported that in their system, WMS Cycle count is using 'this level' cost for valuation instead of their stated desired valuation of 'total cost'
    Could anyone guide me on perhaps profile values necessary to make this happen for them or pertinent questions to ask as to why this is happening?
    My Very Best Regards,
    Mallory

    Hello,
    You can do cycle counting with Rf transaction LM59 for the serialised material.
    1.My experience says when you have HUM activated then to track material HU & serialisation profile works together.
    2.You can do cycle counting of serailised & non serialsed material through Rf gun but clearance of this material will be issue. You may have to create one more transaction to clear the difference of  serialised materials like LI20
    Hope this input helps.
    Regards,
    Prashant

  • How do I setup multiple users to use one source but manage playlists separately?  For example, play counts are specific to each user.

    How do I setup multiple users to use one source but manage playlists separately?  For example, play counts are specific to each user.

    Hi,
    Thank you for posting in Windows Server Forum.
    Here adding to the words of “Tim”, a forwarder is a DNS server on a network used to forward DNS queries for external DNS names to DNS servers outside of that network. You can also forward queries according to specific domain names using conditional forwarders.
    A DNS server on a network is designated as a forwarder by having the other DNS servers in the network forward the queries they cannot resolve locally to that DNS server. You can refer information regarding forwarders and how to configure from beneath link.
    Understanding forwarders
    http://technet.microsoft.com/en-us/library/cc782142(v=ws.10).aspx
    Configure a DNS Server to Use Forwarders
    http://technet.microsoft.com/en-us/library/cc754941.aspx
    Hope it helps!
    Regards.

  • Cycle count by quant with serial number

    Hello all,
    I have a scenario in which I have a mixed storage bin and there are multiple quants in the bin and each have a separate serial number. Now we have to carry out a cycle count based on the quant. I would like to know how to carry out the cycle count and also the procedure to carry out the cycle count. Pl. post the procedure and links related to it.
    Thanks,
    Maxx

    Hi,
    Cycle count is basically conducted either by Storage Type or Material.
    If you are not maintaining a mixed bin strategy, you need to conduct on storage type.
    Depending the no. of cyles in the whole year and based on Fast moving or Slow moving nature of the materials, system will decide the date.
    Hope it is helpful.
    Aktar

  • Sql Devloper 4.0.0.13 - problems with displaying user data types

    Hi,
    I have installed new version of sqldeveloper and have discovered some problems with displaying user data types. The data that is described as VARCHAR2 are displayed with ‘???’.
    The problem persist in table view, script output and exported files.
    My type is described as follows:
    create or replace TYPE "DPTY_ADRESA" AS OBJECT
      ID_DPSF_OPCINE                                         NUMBER,
      ID_DPSF_MJESTA                                        NUMBER,
      OPCINA                                            VARCHAR2(100),
      MJESTO                                            VARCHAR2(100),
      ULICA                                 VARCHAR2(200),
      BROJ                                   VARCHAR2(20),
      SPRAT                VARCHAR2(20),
      OSTALO                             VARCHAR2(100),
      CONSTRUCTOR FUNCTION dpty_adresa RETURN SELF AS RESULT
    add MEMBER FUNCTION dajAdresu RETURN VARCHAR2 cascade;
    when make select column from table that contains this type I get next results:
    CASE 1:
    SQLDeveloper Version 3.2.20.09; Build MAIN-09.87; JDK 1.6.0_43; Windows 7 64 bit
    Select:
    select id, adresalokacija
    from dptr_saglasnosti
    where id = 1;
    Result:
            ID ADRESALOKACIJA
             1 COMP.DPTY_ADRESA(124,4913,'TRAIK','TURBE','BABANA','3452','0',NULL)
    END CASE 1;
    CASE 2:
    SQLDeveloper Version 4.0.0.13; Build MAIN-13.80; JDK 1.7.0_40; Windows 7 64 bit
    Select1:
    select id, adresalokacija
    from dptr_saglasnosti
    where id = 1;
    Result1:
    ID ADRESALOKACIJA
             1 COMP.DPTY_ADRESA(124,4913,'???','???','???','???','???',NULL)    
    But if I select one element it is displayed normal.
    Select2:
    select id, a.adresalokacija.opcina
    from dptr_saglasnosti a
    where id = 1;
    Result2:
    ID ADRESALOKACIJA.OPCINA
             1 TRAVNIK                  
    END CASE 2;
    I have tried this scenario on three different pc with same output.
    Pleas help me to get rid of the '???' in result.
    Best Regards,
    Omer

      I tried on SQLDeveloper Version 4.0.0.13; Build MAIN-13.80; JDK 1.7.0_45; Windows 7 64 bit; NLS setting is default
    all data can show,No ??? in result
    Test step as following:
    create or replace TYPE "DPTY_ADRESA" AS OBJECT
      ID_DPSF_OPCINE                                         NUMBER,
      ID_DPSF_MJESTA                                        NUMBER,
      OPCINA                                            VARCHAR2(100),
      MJESTO                                            VARCHAR2(100),
      ULICA                                 VARCHAR2(200),
      BROJ                                   VARCHAR2(20),
      SPRAT                VARCHAR2(20),
      OSTALO                             VARCHAR2(100),
      CONSTRUCTOR FUNCTION dpty_adresa RETURN SELF AS RESULT
    alter TYPE "DPTY_ADRESA" add MEMBER FUNCTION dajAdresu RETURN VARCHAR2 cascade;
    CREATE TABLE dptr_saglasnosti (
    adresalokacija        DPTY_ADRESA,
      id    number);
      INSERT INTO dptr_saglasnosti VALUES (
      DPTY_ADRESA (65,225,'Vrinda Mills', '1-800-555-4412','sss','aaaa','eeeee','attta'),1 );
    select id, adresalokacija from dptr_saglasnosti where id = 1;
    ID ADRESALOKACIJA
    1    HRCP.DPTY_ADRESA(65,225,'Vrinda Mills','1-800-555-4412','sss','aaaa','eeeee','attta')

  • Using stored procedure with Oracle user-defined types in database control

    Hi,
    I have a requirement where I need to call an Oracle Stored Proc which has IN and OUT parameters. OUT parameters are of user-defined types in Oracle packages.
    I am getting error while calling the Stored proc like below:
    Procedure:
    ==========
    create or replace
    PROCEDURE AA_SAM_TEST (
    col1 out types_aa.aa_tex_type ,
    col2 out types_aa.aa_tex_type ,
    col2 out types_aa.aa_num_type ) As
    Types:
    ======
    create or replace
    package types_aa as
    type aa_tex_type is table of varchar2(255) index by binary_integer;
    type aa_num_type is table of char index by binary_integer;
    end
    Wli Code:
    =========
    DB Control:
    ===========
    * @jc:sql statement="call AA_SAM_TEST(?,?,?)"
    void Call_AA_SAM_TEST(SQLParameter[] param) throws SQLException;
    JPD Code:
    =========
    param = new SQLParameter[3];
    Object param1 = new String();
    Object param2 = new String();
    Object param3 = new String();
    this.param[0] = new SQLParameter(param1 , Types.STRUCT, SQLParameter.OUT);
    this.param[1] = new SQLParameter(param2, Types.STRUCT, SQLParameter.OUT);
    this.param[2] = new SQLParameter(param3, Types.STRUCT, SQLParameter.OUT);
    database_Update.Call_AA_SAM_TEST(this.param);
    I am getting the following error...
    <Jul 24, 2007 6:47:42 PM IST> <Warning> <WLW> <000000> <Id=database_Update; Method=Ctrl_files.Database_Update.Call_AA_SAM_TEST(); Failure=java.sql.SQLException: ORA-06553: PLS-:
    ORA-06553: PLS-:
    ORA-06553: PLS-:
    ORA-06553: PLS-:
    ORA-06553: PLS-:
    ORA-06553: PLS-306: wrong number or typ
    ORA-06553: PLS-306: wrong number or types of arguments in call to 'AA_SAM_TEST'
    ORA-06553: PLS-306: wrong number or types of arguments in call to 'AA_SAM_TEST'
    Can anyone know how to specify OUT parameter of USer-Defined types while using a DB control to access a Stored Proc in Oracle.
    Any help is highly appreciated.
    Thanks

    Hi,
    I have similar problem. Have you already solved the issue?
    Thanks

  • Package with only user defined types

    I am creating packages and want to keep user defined types in one package only.
    I appreciate if any one can suggest me for this package, I include all types in the header portion then what should go in the package body?

    I guess these are VARRAY, TABLE, and RECORD types? Then you can put them in the package spec, and no package body is required.

  • RH11: Word export: Subchapters are generated with same heading as chapter above

    Dear community,
    when I export my RH project to word, RH generates for each chapter (that has any subchapters) an additional subchapter with the same heading as the chapter above. In the project as in the chm export, the chapter does have content (as I want). But not in the word export.Here the chapter is empty,its content is put into that new subchapter. Got me?
    You can see what is happening in the export dialog.
    So whats happening there, what do I wrong?
    Thanks for your support!

    Sorry, you did post an image.
    It looks like you have created a book with the same name as the first topic. In the document you should see a book called Ubersicht followed by a topic called Ubersicht.
    The document is following the structure you have defined. I think what you are wanting is that Ubersicht is not indented one level as shown. Use the Left arrow above.
    I also suspect you have the book in the online help set up to open the topic. Experiment with that unlinked.
    This is all covered in the pages on my site. It does take a little trial and error to get it working as you want but it will become obvious.
    Hope that solves it for you.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • New bookmarks are generated with wrong adress, how to fix?

    When I want to add a new bookmark, firefox adds not the adress of the page I am currently visiting, it takes a total random one.
    For example: I just wanted to add: http://www.medscape.com/, so I hit the star and then went to recent bookmarks and when I click on the latest one added (which says the correct title: Latest medical news.... ) Firefox goes to: https://www.google.com/search?q=korea&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:en-US:official&client=firefox-a&channel=fflb
    This is so incredibly annoying. I already deleted the Application and re-installed but it still does it.
    Please help me!

    Try this as a test. On this page, click the bookmark star. Now click it again.
    A window should open with that bookmark. Copy and post the bookmark
    and the address bar.
    '''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
    While you are in safe mode;
    Type '''about:preferences'''<Enter> in the address bar
    Select '''Advanced > General.'''
    Look for and turn off '''Use Hardware Acceleration'''.
    Poke around safe web sites. Are there any problems?
    Then restart.

  • All the secondary database files are generated with mdf extensions

    Hi,
    See I have set up DR Server with SQL database. The problem is that when it creates new database on DR Server, all the secondary files, which are with .ndf extension on primary servers, gets created as .mdf files instead of ndf files.
    Can anybody tell me how to solve this problem.
    Will it create any problem when the secondary(DR Server) act as Primary server in case of failure.

    Hello,
    you can easily rename the files by following this procedure (see note 151603 for more details):
    - detach the database from the server
    - rename the files to the naming convention you like
    - attach the database with the new names again
    I do not exactly know what you mean with DR Server, but i assume that you mean
    Log Shipping or Database Mirroring. Both are not affected from the different filenames as they are using only the internal database name (e.g. PRD).
    Regards
      Clas

  • Production orders are done with GR 101 moment type without material consumption(261)

    Hello Experts,
    We have some of production orders where the goods receipt is done with 101 moment type on confirmations without consuming the components i.e not 261 moment type not happened.
    We have checked the backflush for the components and also the stock and every thing is fine.
    But we have observed the Resevations for corrsponding Production orders the "moment allowed" is not checked and hence the 261 moment is not happened, But not sure why it is not active.
    Could any one let me know why this RESB-XWAOK is not checked in the reservations and aslo on what are the possible conditions this happens.
    Please help...Thanks in advance
    Regards
    Madan

    check directly in MB1C transaction with the reference of order movement type 261 material would be consume.
    also check batch enter field in MRP 2 view control this make it blank and then system will not determine batches in production order and you can select batches in MB1A/B/C transaction.
    Regards,
    Sanjeev

  • Windows XP see blank screen when remote desktop to Windows 7 with fast user switching disabled

    All computers are in workgroup environment, no AD.
    Windows 7 pro are configured with fast user switching mode disabled so that only one login session can run at a time. When a Windows 7 machine remote desktop to another Windows 7 machine, the remote desktop 'server' will give 30 seconds count-down for the
    console logged in user to accept remote connection, or when timeout expires it kicks out the console logged in user. This is completely ok.
    This become a problem when a Windows XP rd client try to remote desktop to these Windows 7 machines, Windows XP see a blank screen if the remote Windows 7 machine has a user logged in, as it is waiting for the user to log off first. This is not desirable
    as our administrators want the console session to be logged out automatically if they (administrators) want to remote desktop in.
    Is this a configuration problem? Is this a OS design, can't be changed?
    Valuable skills are not learned, learned skills aren't valuable.

    Hi,
    As I know, for RDP session in Windows 7, you don't need to configure the fast user switch option disabled. Windows 7 doesn’t support multiple Remote Desktop sessions by design, that means only one RDP session at a time.
    I remote into my Windows 7 machine (which has a user logged in) from my XP machine, all work fine, the user logged in Windows 7 machine is automatically "kicked off".
    May I ask a question? Does this issue happen in all XP machines? If you leave Windows 7 machine started and no user logged in, the RDP session in Windows XP established quickly?
    I would suggest you keep latest drivers graphic card and latest updates paches for both Windows XP (Windows XP has come to its end of the lifecycle)and Windows 7.
    Yolanda Zhu
    TechNet Community Support

  • How to share library on same mac with two users

    please provide step by step instruction on how to share library for my two girls on the same computer. my older daughter already has itouch and library. Now for the holidays got younger one an itouch also and want to share the library.
    i am a novice with computers...so please help

    just in case you haven't already resolved this, see: http://support.apple.com/kb/HT1203
    To share your music with other accounts on the computer
    On Mac OS X
    1. Quit iTunes.
    2. Locate your iTunes Music Folder. It is stored by default in ~/Music/iTunes or ~/Documents/iTunes/.
    These folders cannot be accessed by other accounts on the computer. In order for other users to be able to access your music, you must move it to a publicly accessible location.
    The Public folder in your home directory (~/Public), or to another folder outside your home directory that other users have access to, such as /Users/Shared.
    Tip: The tilde "~" refers to your home folder. For more information see Mac OS X: Using Your Home Directory.
    3. Drag the iTunes Music Folder to a publicly accessible location.
    Important: Do not move the iTunes folder, the iTunes 4 Music Library file or the iTunes Library.xml file.
    4. Open iTunes.
    5. From the iTunes menu, choose Preferences.
    6. Click Advanced.
    7. Click the Change button.
    8. Navigate in the Change Music Folder Location dialog to the location of your iTunes Music folder.
    9. Click Choose.
    Repeat these steps for each account that is sharing music with other users.
    Note: If multiple users of a computer are storing music in one folder, duplicate song files are generated when a user imports music from CD that has already been imported by another user.

  • Regarding Cycle Count Entries

    Dear All,
    I am doing cycle counting in which I have 10 Items in my subinventory. I have completed ABC Analysis and classified first 2 items as A and next 3 item as B and remain 4 items as C. Even I have performed Cycle Count as well.
    In Cycle count entries i am not able to enter count quantity for my entire 10 items instead it is showing only 6 items only. Why I was not able to see remaining 4 items and how do I enter count quantity for those missed 4 items?
    What would be the solution if i want to see all my 10 items in in cycle count entries form?
    Edited by: SaroR on Jan 20, 2010 6:58 AM

    Can you check mtl_cceoi_action_pub.import_CountRequest api?
    Please make sure you carry out the following before calling the API.
    1. Create a Cycle Count
    2. Enter a Manual Cycle Count Entry.
    3. Run program "Perform Complete Cycle Count" to generate generate cycle count request
    4. Post the count Entries using the by calling the API using your Script.
    Check the following MOS notes.
    Cycle Count Request Import (MTL_CCEOI_ACTION_PUB API) Fails When Using Serial Number Multiple Per Request [ID 1468453.1
    Cycle Count Api Not Working For Scheduled Counts [ID 786497.1]
    The Cycle Count Open Interface Is Not Working For The Stock In Api [ID 818977.1]
    Cheers,
    ND
    Use the "helpful" or "correct" buttons to award points to replies / Mark the thread as answered, if your question is answered.

Maybe you are looking for

  • How can I show tree's nodes in a Popup List of values

    I have a tree and in a different form for an item I want to write nodes together for example computer/desktop/asus/.... computer/pda/hp/... this must be shown in a popup list of values can you help? thanks

  • Errors in PHP/Oracle article

    Hi, There are a few errors in the article dealing with PHP/Oracle located at http://otn.oracle.com/oramag/webcolumns/2003/techarticles/hull_php.html In the listing for the section called "How to use a database": - $mycursor ora_open ($conn); should b

  • Creating Task in a Project of Project Server 2013 - Exchange 2013

    Hi, We have made an integration between Project Server 2013 and Exchange 2013 for the tasks of user. It's working fine but I've got a little question. Is it possible from Exchange to create a task in a specific project of Project Server ? Because whe

  • GI cancel not possible

    Dear experts, User issue 2 material to a plant for a stpo which need to cancel, but they can not cancel the doc. error message is given below. I have checked ..there is z table which maintain serial no. the stock to material is now in transit. please

  • Cannot install PE13

    Cannot seem to install Photoshop Elements 13