WMS Transfer posting from Q to unrestricted issue.

Hi All
Im having some issue in when I change from Quality inspection to Unrestricted stock.
When I GR using MVT 101, the stock will go into Interm Area 902 with Q status in the warehouse
I then use MVT 321 to post the certain material from Q to unrestricted.
When I use LS26 to check, the stock status of the material has changed from Q to unrestricted.
However when I create a TO, the status in the TO is still "Q". ( it should be unrestricted so when i do confirm the TO , it will be placed into the propose bin as unrestricted stock not Quality Inspection )
I check the TR that was created for that material and the stock status is still "Q".
Is there some setting im missing from my configuration , as the system should automatically change the TR from stock status "Q" to unrestricted after the transfer posting from MVT 321?
Thanks in advance !

Hi Frenchy
Thanks for the reply.
As explained before. When I do a MIGO from inbound, in the WMS warehouse it should go to a general receipt area ( 902 ) as it should not directly go to bin because its needs to pass IQC before it should be properly transfer from the general receipt area to the bin. In the warehouse via LS26. It's status is Q, and you are correct, when I create the MIGO it automactically creates a TR with the status. After it has pass IQC, ( via inspection lot QA11), a transfer posting is created to for the material ( by batch code ) to change to unrestricted stock. Again in WMS view via LS26. The stock with the batch code is changed to unrestricted.
Now, my question is, after MVT 321 for transfer posting, in WMS is there a linkage where it should automactially change the TR status to unrestricted so when i create a TO via material document of the GR, it should go to unrestricted instead?

Similar Messages

Transfer posting from batch to batch using 309 or 311 issue

Hi Experts,
Need your help, I'm facing the following issue, I'm trying to transfer posting from batch to other batch using 309,
Using MIGO
the material, plant, storage location are the same but the batch number are different, I didn't get any message and when I save, there's nothing is changed, I checked the material document and found that the destination batch is same as source batch.
Using MB1B
the material, plant, storage location are the same but when I entered the source batch, the batch number is copied to the destination batch number and I got message M7104 "stock to be removed from storage same as stock to be placed into the storage" and I can't change the destination batch number.
Please advise how can I solve this issue or if there's any alternative way to transfer from batch to other by one step.
Regards,
Mohamed Mansour.

You can well use 309 movement type in MIGO or MB1B and also you can well change the receiving batch number during the transaction..
MB1B
MIGO
I think you can able to change the receiving batch.
What the status of receiving batch shows in MIGO or MB1B ?
Also check you field selection for movement type 311
Go to OMBW, double click on 311, then double click on Transfer Posting
It should be as optional entry.
Then try again MB1B.
Regards
Dev

Transfer posting from storage to storage locn

Dear All,
I understand we can do the transfer posting from storage location to storage location through Mvt type 311.
The scenario is I have to transfer the goods from Storgae locn 1 unrestricted to storage locn 2 quality inspection.
Kindly let me know if it is possible.

Hi,
There is no direct movement type. You have to do this in 2 steps. 1st with 311 for St.Loc-St.Loc then 322 for Unrestr to QI.
Hope it helps
Shiva

How to cancel UD & to reverse stock which posted from QI to Unrestricted?

Dear Experts,
I have created STO for stock transfer from plant 2 to plant 1. Delivery, PGI, Excise Invoice has been confirmed at plant 2. Subsequently GR has been made with ref. to delivery doc. at plant 1. Being the transfered material is subject to QM. Automatic stock posting has been happened and stock has been posted to QI stock. Subsequently UD and stock posting from QI to Unrestricted has performed.
Now problem is, as profit center for plant 2 has been maintained wrongly in material master and without checking the profit center data at plant 2 in mat.master, all the above mentioned activities has been made. So, i want to reverse all the documents(GR, GI, STO).
Kindly guide me how to proceed in the above regards. Thanks in advance.
Regards,
Kumar

May use MB01>mvt type 102 with reference to original document>pick stock from unresticted.-->save.
if this is not possible the you have to bring back the stock in QI by using SAP NOTE 175842 ,then cancel original document

Transfer posting from functional area A to functional area B

When running the F.50 transaction some currency gain/loss postings have been posted to the wrong functional area. Can somebody help me how I can do a transfer posting from one functional area to another if it's possible? Or do you know another solution to this issue?

Hello,
Please try once transfer posting with clearing through T.code F-51
and choose transfer posting with clearing.
Please try this once in development i tried this for other like changing of business area amount cost center like that..
Regards,
Sankar

MB1B: Transfer posting from material to material

hello,
I would like to add material validation mechanism in MB1B for transfer posting from material to material, that is we can define only particular materials can be transfer to receiving material and validate in MB1B with specified movement type, how to do this?
Is there any thing available in standard?
we can do this using user exit but I couldn't find any exit relevant for this scenario?
I appreciate your earliest responses.
regards,
Jawed Ali

well I have checked all these exits but none was called during the process:
                                                                                MBCF0002            Customer function exit: Segment text in material doc. item
MBCF0005            Material document item for goods receipt/issue slip
MBCF0006            Customer function for WBS element
MBCF0007            Customer function exit: Updating a reservation
MBCF0009            Filling the storage location field
MBCF0010            Customer exit: Create reservation BAPI_RESERVATION_CREATE1
MBCF0011            Read From RESB and RKPF For Print List in MB26
MBCFC003            Maintenance of batch master data for goods movements
MBCFC004            Maintenance of batch specifications for goods movements
regards,
Jawed Ali

Transfer posting from material to material ( for blocked stock)

Dear All,
Whether transfer posting from material to material can be done for blocked stock also? because through 309 movement type i did not find any option, so let me know if there is any option
Regards,
Balakrishna R.V

Dear
Transfer posting of material can't be done if material is in Block Stock.
When block stock is inspected in quality test in inquality inspection stock then it goes to Unrestricted use stock.
finally Transfer posting is possible for unrestricted use stock material.

Transfer Posting: From Valuation Type to Valuation Type

Hi Guys,
When i do Transfer Posting: From Valuation Type to Valuation Type in same plant and same Storage location with mvt type 309 system gives Error as below
"Stock to be removed from storage same as stock to be placed into storage
Message no. M7104"
Can any one suggest the solution
Regards,
Ashish Vats

Hello Ashish,
As you are trying to transfer same material but one val type to another type, the system checks the source location and destination location, but in your case both are the same it throws information/error message. You need to put the source valuation type and destination type as mentioned by Sanjay.
Hope this will help.
Regards
Arif Mansuri

Transfer posting from Unrestricted to Quality using QM

Hi Team,
Im not expert in QM, I need your help.
Here is using the module QM for quality inspection, I have the following situation:
A GR 101 was done into a PO.
Quality release the material and stock moved from Quality to Unrestricted
The detect that the Qty of pieces are not correct and now they want to reverse the GR, they tried but was not possible. Error:; Deficit of SL Stck.in qual.insp 972 PCE : 004933000301 7601 9001
So What step I need to follow in order to move the inventory from unresticted to Quality.
I already try with Mov 322 but get this message: Change the inspection stock of material xxx in QM only

If you have QM then you cannot post stock with MM movement into Q-status.
But you can reverse the GR in MIGO, but not with cancel in reference to material document. You have to do a Goods receipt to purchase order but using then movement type 102 for cancellation. Then in the detail tab you can change the quality status from the proposed quality status to unrstricted status.

Not able to post from quality to unrestricted

HI
The Error is displaying when i tried to post the quantity to unrestricted from QA32.
Status check error
The function you selected cannot be carried out     Change inspection lot
Detailed info
Stat       Description                                          Influence
UD         Usage decision has been made         Disallowed
Active status
UD
PASG
CCTD
CALC
RREC
DEF
STIC
ICCO
SPRQ
SPST
What may be problem?

Hi,
I am not syre but it may be autharisation issue,
Just run transaction again after getting u same erro cretae spool request & check at what object you are not autharised. .Once it get investiget you can take autharistion for same.
Check for both T code- Qa32 ,QA02.
Just check out.
Regards
SANIL

Transfer Posting from Vendor Ledger to Customer Ledger

Dear Experts,
We are in to service industry, most of our customers are also having vendor codes, we used to give some commission to them the is posted to vendor codes due to TDS posting, on periodical basis, the same needs to adjust with outstanding in customer accounts.
For this our users are processing through individual posting for each customer through F-04, as volume is very high and it is consuming lot of time to complete this activity. Is there any standard process available in SAP, so that we can process all the transfer postings from vendor ledgers to customer ledger in a single process on periodical basis.
Thanks & Regards
Madhava Raj

Hello Raj,
You can use BDC as stated by Mani.
BDC - POSTING_INTERFACE_CLEARING
Please check this link for more information related to this BDC.
http://scn.sap.com/message/3770202\
I hope it helps else revert us for any issues.
Thanks & Regards,
Lakshmi S

Transfer Posting from Own stock to customer stock

Hi ,
I have two storage location. Now i wanted to transfer stock from one storage location to other , but while transferring the stock should be received against a sales order in the receiving storage location.
For e.g.. i have a storage location in the plant and another one in port. I want to transfer stock from the plant one to the port one.So when the goods are received in Port storage location it is received against a sales order that is booked against a sales order. can this be done?
how to do this?
ram.

try it with movement type 412, I can enter a receiving storage location different from the issueing storage location while doing the transfer posting own to customer stock

Mass Transfer Posting From Quality Stock to Return Stock with FI Effect

Dear Gurus,
1 Is there any way To do Transfer Posting At a stretch 1500 material list from Quality Stock to Returns Stock within a plant ?...
2 Effect of Financial Entries eg Cost ?..
Thanks & Regards
Darvesh

Hi Shoib,
Is there any way To do Transfer Posting At a stretch 1500 material list from Quality Stock to Returns Stock within a plant ?...
2 Effect of Financial Entries eg Cost ?..
Sol: 1 ans is No. You Can not transfer a 1500 material from quality to unrestricted stock, Cause the Transfer of material is based on Either PO or material doument
If you still want to do it Chek with your ABAper to develop a BDC wich can transfer the material and or each PO it should crreate a Accounting Document

Transfer posting from one GL account to another

Hi,
For a GL account which is not open item managed, now have to check the "open item management".
since it has the amount, so i can not do it.
But i read the following help message.
If you want to switch this function on retroactively for a certain account, you should create a new account with the correct setting and use this to make a transfer posting of existing items.
so, after creating a new GL account with correct settings. How to Transfer the posting of the Existing items?
Thanks in advance,
Swetha

Hi all,
i posted a document in F-02 by debiting the new GL account and crediting the old account.
now, the balance of the old account is Zero.
but still can not save it by checking the " open item management" because it says as below.
"Account balance = 0 but open items exist in the account
The data contains error, you cannot save"
so, by making zero also we can not change the that Chcek box.
and another option you all suggested is transfer of the posting to new Gl account.
since the old account is not open item managed, so i can not follow this option also.
and one more, have to come across this kind of issue?
then how did you solve it.
Please share your finding.
Regards,
Swetha

Transfer posting from one plant to another plant

Friends i want to transfer goods from one plant to another plant of same company code and iam trying this one in transaction migo if post for this it gives an error
"posting only possible in periods 2006/05 and 2006/04 in company code" what error it is

Hi,
Use the MMPV to open the new posting period date.
here you have to use your company code & Current date , then execute to open the new posting period.
while running this transaction you ensure that GR open screen should be closed.
hope it helps....
manoj Singh

WMS Transfer posting from Q to unrestricted issue.

Similar Messages

Maybe you are looking for