WMTA -- automatic TO for outbound Delivery

Dear all,
A quick question about automatic TO creation for an outbound delivery:
My message WMTA has been properly determined, and has a green traffic light.
When running SE38 RSNAST00 my delivery is not processed.
When running RLAUTA20 in background, same thing.
When running LT03 TO creation takes place with any error.
What else could be missing?
Thanks,
Noki

Hi,
well, if the traffic light is green, the TO should have been created already (so no need for any of the other transactions or reports). What is the picking status of your delivery?
Best regards
Juergen

Similar Messages

Automatic goods issue for outbound delivery, during the transfer order confirmation

Hello,
Could you please advise how to realize automatic goods issue for outbound delivery, during the transfer order confirmation in the WMS.
Now after creation of outbound delivery, i can't post the goods issue. Before i have to make the transfer order and confrim it and only after this i can post the goods issue in the VL02 t-code.
Could you please advise - what i have to customize that to make automatic GI for outb. delivery (i mean with creation material document) during the TO confrimation.
Thanks in advance.

Hi Iiya
Check the below setting, might be helpful

How do we do Automatic freight preperation for outbound delivery in SAP

How do we do Automatic freight preperation for outbound delivery in SAP

'Automatic freight preperation'? New concept that SAP came out with? Or is it Freight Calculation? If it is the latter, activate Shipment and Transportation and you have it in a jiffy. You need to work on VT01N, possibly VI01. Plenty of work in SPRO, too
Regards
Ramana ND

Create TO automatic by using wave pick for outbound delivery NLC (STPO)

Dear all,
In Cross company code process, we have to create TO automatic by using wave pick for outbound delivery NLC (delivery type NLCC). Time data in outbound delivery NLC have been fulfilled, but there is no TO created, what is wrong in this? pls help.
Thanks

Hi Kishor,
Is there any requirement of TO when ECC system is Interfaced to EWM.
As per my understanding we have terminology WT & WO in EWM.
Regards,
Rock

LSMW for Outbound Delivery

Hi,
I am not able to find an LSMW for creating GR for outbound delivery. I tried using recording in MIGO but it did not work. Also MB1C is not working for outbound delivery. Please help.
Regards,
Anubhav

Hi
I think it is better to write a Z program/ BDC to have a mass GR creation of an outbound delivery.
or
You have an Auto Goods receipt using confimations. If we activate Auto GR in customizing for Confirmation control key. Once confirmations(ASN) is created a GR will be created automatically.
Hope this helps
Regards,
Sasi

BAPI for posting equivalent of MIGO GR (101) for OUTBOUND DELIVERY (R05)

Hi everyone
I am looking for a BAPI or function module to do the above; it is the second leg of an STO posting between plants, the first leg being where the goods issue is posted against the outbound delivery into in-transit stock (IM movement 641), with the second being to GR this stock with a 101, which will take it out of in-transit and into unrestricted stock at the destination plant.
I have tried BAPI_GOODSMVT_CREATE from every angle but have come to the conclusion it does not cater for this. I also tried to do the GR against the STO (P/O) from which the delivery was created, but this does not work as the follow-on documents for the delivery will not be updated.
Any suggestions?
Thanks
Andrew

hi,
i try to doing posting goods issue for outbound delivery out fo the regular progression.
the posting is automaticly as part of outside program.
thanks alot,

Goods Receive for Outbound Delivery Without Reference using MIGO

Dear Colleague ...
We might need your insight on the case below related to Goods Receive of Outbound Delivery without Reference using MIGO:
(1) In the current SAP Enjoy screen of MIGO, we are allowed to select the reference document (e.g. = PO, Material Document, Inbound Document, Outbound Document, etc.)
(2) We did 3 (three) kind of test set: GR for Inbound Delivery, GR for Outbound Delivery with STO and GR for Outbound Delivery without reference.
(3) The first 2 (two) cases work just find with MIGO. We believe it is because the receiving plant is pretty much determined in the reference document, which is PO (case 1) or STO (case 3)
(4) However, the last case came up with the error message "Goods receipt not possible for delivery 8000610236: error code 5". We believe that this is the standard design of SAP, that the receiving plant is required and it is not defined explicitly in the delivery document.
(5) Moreover, we also believe that that's the reason why SAP (via the Logistic Execution module) provide the Handling Unit and Shipment, which can be used to perform such receive function, which will imply the MM posting (goods issue and goods receive) IF there is stock transfer involved.
Appreciate for any thoughts or input on the above. Many thanks,
Alvon Sibarani

use transaction mb0a it will work for the scenario.

Condition table for outbound delivery

Hi guys
Is it possible to create a new condition table for outbound delivery output type with a field sold-to, although this field is available in the field catalogue , it does not show up during a table creation in the FieldCatlg,why?
Your quick response appreciated .
Regards
Dominik

Hi Dominik,
You need to Append the new fields which you want to see in the Field Catelog to create a condition table.
Please follow the following process
Got to T. Code SE11 andGive the Table name
Then click on the Button Append Structure and
Key in the name of you append starting with letter 'Z'.
Add fields whcih you want.
Activate the table.
Hope this is clear.
Reward if helpful.
Thanks,
Praveen

Error while doing PGI for Outbound delivery using BAPI BAPI_GOODSMVT_CREATE

Hi All,
I am getting an below error while doing PGI for outbound delivery using the BAPI BAPI BAPI_GOODSMVT_CREATE:
Goods movement not possible with mvmt type 601
Can anyone suggest me what will be the solution for it?
Regards,
Raghuraman.k

I tried with the above BAPI but it is not working.
In my case a delivery has one line item with batch split and other line item without batch split.
Below is my code :
DATA : gwa_header_data TYPE bapiobdlvhdrcon,
       gwa_header_ctrl TYPE bapiobdlvhdrctrlcon,
       lv_delivery     TYPE bapiobdlvhdrcon-deliv_numb,
       git_item_data TYPE STANDARD TABLE OF bapiobdlvitemcon,
       gwa_item_data TYPE bapiobdlvitemcon,
       git_item_ctrl TYPE STANDARD TABLE OF bapiobdlvitemctrlcon,
       gwa_item_ctrl TYPE bapiobdlvitemctrlcon,
       git_return    TYPE STANDARD TABLE OF bapiret2,
       gwa_return    TYPE bapiret2.
*Header data
gwa_header_data-deliv_numb = '0808000002'.
*Header Control data
gwa_header_ctrl-deliv_numb = '0808000002'.
gwa_header_ctrl-post_gi_flg = 'X'.
*Delivery Number
lv_delivery = '0808000002'.
*Item data and its corresponding control data
gwa_item_data-deliv_numb      = '0808000002'.
gwa_item_data-deliv_item      = '900002'.
gwa_item_data-dlv_qty         = 4.
gwa_item_data-dlv_qty_imunit = 4.
gwa_item_data-fact_unit_nom   = 1.
gwa_item_data-fact_unit_denom = 1.
APPEND gwa_item_data TO git_item_data.
gwa_item_ctrl-deliv_numb      = '0808000002'.
gwa_item_ctrl-deliv_item      = '900002'.
gwa_item_ctrl-chg_delqty      = 'X'.
APPEND gwa_item_ctrl TO git_item_ctrl.
gwa_item_data-deliv_numb      = '0808000002'.
gwa_item_data-deliv_item      = '900003'.
gwa_item_data-dlv_qty         = 6.
gwa_item_data-dlv_qty_imunit = 6.
gwa_item_data-fact_unit_nom   = 1.
gwa_item_data-fact_unit_denom = 1.
APPEND gwa_item_data TO git_item_data.
gwa_item_ctrl-deliv_numb      = '0808000002'.
gwa_item_ctrl-deliv_item      = '900003'.
gwa_item_ctrl-chg_delqty      = 'X'.
APPEND gwa_item_ctrl TO git_item_ctrl.
gwa_item_data-deliv_numb      = '0808000002'.
gwa_item_data-deliv_item      = '000020'.
gwa_item_data-dlv_qty         = 10.
gwa_item_data-dlv_qty_imunit = 10.
gwa_item_data-fact_unit_nom   = 1.
gwa_item_data-fact_unit_denom = 1.
APPEND gwa_item_data TO git_item_data.
gwa_item_ctrl-deliv_numb      = '0808000002'.
gwa_item_ctrl-deliv_item      = '000020'.
gwa_item_ctrl-chg_delqty      = 'X'.
APPEND gwa_item_ctrl TO git_item_ctrl.
BREAK-POINT.
CALL FUNCTION 'BAPI_OUTB_DELIVERY_CONFIRM_DEC'
EXPORTING
    header_data    = gwa_header_data
    header_control = gwa_header_ctrl
    delivery       = lv_delivery
TABLES
    item_data      = git_item_data
    item_control   = git_item_ctrl
    return         = git_return.
BREAK-POINT.
IF git_return IS INITIAL.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
ENDIF.

BAPI_GOODSMVT_CREATE update VBFA or not for Outbound Delivery?

Dear Gurus,
When I try to use BAPI_GOODSMVT_CREATE to do the goods receipt for the outbound delivery as the replacement for MIGO transaction, I use 01 as movement code and the bapi create material document and updating MSEG. But it doesn't update VBFA so the items is still showed in MIGO and cannot post there (because it is already moved in BAPI in program.)
Anybody have any suggestion for this situation? Thanks a lot and points will be rewarded.

Hello,
When you use BAPI_GOODSMVT_CREATE to post Goods Receipt for outbound delivery, reference documents at header and line items should be delivery number and line numbers (BAPI2017_GM_HEAD_01-REF_DOC_NO, BAPI2017_GM_ITEM_CREATE-DELIV_NUMB_TO_SEARCH & BAPI2017_GM_ITEM_CREATE-DELIV_ITEM_TO_SEARCH). Then only document flow will be updated.
Thanks,
Venu

BAPI for GR for Outbound delivery

Hi Gurus,
   I need to create a Goods Receipt against an Outbound Delivery ( movement type "101" ) using the BAPI BAPI_GOODSMVT_CREATE
user is using MIGO transaction for the same. There he will choose the GOODS RECEIPT for OUTBOUND DELIVERY and enters the delivery number. The movement type "101" is used.
I tried passing gm_code = 01 and mvt_type = 101 and mvt indicator as u2018Bu201D , but Iu2019m getting an error message 'ENTER PURCHASE ORDER NUMBER'.
I donu2019t have PO number . I just have shipment number from which I have found open outbound deliveries and now I need to do GR for each of the Outbound delivery.
Please let me know if Iu2019m passing the right gm_code and mvt indicator to the BAPI or if Iu2019m missing any parameters. Iu2019m passing the following parameters to the BAPI ?
Delivery. No. , delivery item, Doc. Date , Posting Date , ref document num , Quantity, Storage Location, External qty, External qty unit, matnr, werks .
Your help is greatly appreciated.
Thanks in advance.

Thanks for replying. I went through the entire BAPI documentation but did not found anything related to GR for outbound deliveries.
I searched some older posts in sdn related to this problem but almost all are unanswered question.
I'm passing gm_code = 01 , mvt_type = 101 and have tried all movement indicator like 'B' , 'F' and blank.
here is what I'm passing in my Bapi.Please let me know if I'm missing something or if I'm passing something incorrectly.
gm_header-pstng_date = sy-datum.
      gm_header-doc_date   = sy-datum.
      gm_header-ref_doc_no = wa_lips-vbeln. "The Outbound delivery Number
      gm_code-gm_code      = '01'.
     MOVE '101'              TO     gm_item-move_type.
      gm_item-material             = wa_lips-matnr . "Material Number from the Delivery.
      gm_item-plant                = wa_lips-werks . "Receiving Site.
      gm_item-stge_loc             = wa_lips-lgort. "Receiving Storage Location.
      gm_item-entry_qnt            = wa_lips-lfimg.
     gm_item-entry_uom           = wa_lips-vrkme.
      gm_item-ENTRY_UOM_ISO        = wa_lips-vrkme.
      gm_item-mvt_ind              = 'B ' .
      gm_item-deliv_numb           = wa_lips-vbeln.
      gm_item-deliv_item           = wa_lips-posnr.
      gm_item-DELIV_NUMB_TO_SEARCH = wa_lips-vbeln. "delivery number
      gm_item-DELIV_ITEM_TO_SEARCH = wa_lips-posnr. "delivery item
if I donot pass any value in mvt indicator the error I'm getting is 'Update control of movement type is incorrect (entry 101 X X)'
if I pass 'B' in mvt indicator error is 'Material document data and PO data do not match (Plant)'
if i pass 'F' , erro ris 'Order not found or not permitted for goods movement'.
Please help me. This is kind of critical issue. or please suggest if I can do GR for outbound delv in any other way.
Thanks...!!!!

Input parameters for BAPI_GOODSMVT_CREATE --MIGO--GR for Outbound Delivery

Hi Friends,
We have to create a Goods Receipt against an Outbound Delivery ( movement type "101" ) using the BAPI BAPI_GOODSMVT_CREATE.
In online the user is using MIGO transaction for the same. There he will choose the GOODS RECEIPT for OUTBOUND DELIVERY and enters the delivery number. The movement type "101" is used.
Could you please tell me the GM code and the required fields to be passed for the above scenario.
I have gone through the example program in the link...
http://www.sap-img.com/abap/bapi-goodsmvt-create-to-post-goods-movement.htm
but unable to find how to use this BAPI for simulating MIGO transaction.
The fields available are with us are...
Delivery. No. --- Doc. Date - Posting Date-Quantity-Storage Location-
Reason for movement-External qty-External qty unit-Goods recipient-Excise Selection
Are these fields sufficient for doing MIGO with this BAPI or do we require more fields???
Thanks and Regards,
Bharat

see the following code. it may be useful.
LOOP AT I_TAB.
 count = sy-tabix.
 SELECT SINGLE * FROM ZMM_GR_UPLOAD1
 WHERE SOLOMON_GR = I_TAB-SOLOMON_GR AND
 SOLOMON_GRDAT = I_TAB-SOLOMON_GRDAT.
 IF SY-SUBRC = 0.
 I_TAB-FLAG = 'C'.
 modify i_tab index count.
 concatenate 'File Name : ' name into i_msg1.
 append i_msg1.
 CONCATENATE 'ERROR PO : ' I_TAB-SOL_PONO
 ' WAS ALREADY UPLOADED' INTO I_MSG1.
 APPEND I_MSG1.
 CLEAR I_TAB-FLAG.
 CONTINUE.
 ELSE.
 REFRESH I_ITEMS.
 CLEAR I_ITEMS.
 CONCATENATE I_MAIN-SOLOMON_GRDAT+4(4)
 I_MAIN-SOLOMON_GRDAT+2(2)
 I_MAIN-SOLOMON_GRDAT+0(2) INTO G_DATE.
 gmhead-pstng_date = G_DATE.
 gmhead-doc_date = sy-datum.
 gmhead-pr_uname = sy-uname.
"01 - MB01 - Goods Receipts for Purchase Order
 gmcode-gm_code = '01'.
 refresh itab.
 clear itab.
 SORT I_MAIN BY SOLOMON_GR.
 LOOP AT I_MAIN WHERE SOLOMON_GR = I_TAB-SOLOMON_GR.
 itab-move_type = '101'.
 itab-mvt_ind = 'B'.
 itab-plant = I_MAIN-WERKS.
 itab-material = I_MAIN-MATNR.
 itab-entry_qnt = I_MAIN-ERFMG.
 itab-stge_loc = 'OMR1'.
itab-move_stloc = pcitab-recv_loc.
 itab-REF_DOC = 'exnum123'.
 itab-NO_MORE_GR = 'X'.
 itab-WITHDRAWN = ''.
 itab-stge_loc = I_MAIN-LGOBE.
 itab-po_number = I_MAIN-EBELN.
 itab-po_item = I_MAIN-EBELP.
 itab-unload_pt = I_MAIN-ABLAD2.
 append itab.
 ENDLOOP.
 if not itab[] is initial.
 call function 'BAPI_GOODSMVT_CREATE'
 exporting
 goodsmvt_header = gmhead
 goodsmvt_code = gmcode
 * TESTRUN = ' '
 IMPORTING
 goodsmvt_headret = mthead
 * MATERIALDOCUMENT =
MATDOCUMENTYEAR =
 tables
 goodsmvt_item = itab
GOODSMVT_SERIALNUMBER =
 return = errmsg.
 clear errflag.
 loop at errmsg.
 if sy-tabix = 1.
 concatenate 'File Name : ' name into i_msg1.
 append i_msg1.
 concatenate 'Sol PO : ' I_TAB-SOL_PONO ' '
 I_TAB-SOL_PODT into i_msg1.
 append i_msg1.
 endif.
 if errmsg-type eq 'E'.
 write:/'Error in function', errmsg-message.
 errflag = 'X'.
 else.
 write:/ errmsg-message.
 endif.
 move errmsg-message to i_msg1.
 append i_msg1.
 endloop.
 if errflag is initial.
 CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
 EXPORTING
 WAIT =
 IMPORTING
 RETURN =
 commit work and wait.
 if sy-subrc ne 0.
 write:/ 'Error in updating'.
 exit.
 else.
 concatenate 'File Name : ' name into i_msg1.
 append i_msg1.
 concatenate 'Sol PO : ' I_TAB-SOL_PONO ' '
 I_TAB-SOL_PODT into i_msg1.
 append i_msg1.
 write:/ mthead-mat_doc, mthead-doc_year.
 ZMM_GR_UPLOAD1-SOLOMON_GR = I_TAB-SOLOMON_GR.
 CONCATENATE I_TAB-SOLOMON_GRDAT+4(4)
 I_TAB-SOLOMON_GRDAT+2(2)
 I_TAB-SOLOMON_GRDAT+0(2) INTO
 ZMM_GR_UPLOAD1-SOLOMON_GRDAT.
 ZMM_GR_UPLOAD1-SOLOMON_GRDAT = I_TAB-SOLOMON_GRDAT.
 INSERT ZMM_GR_UPLOAD1.
 COMMIT WORK.
 I_TAB-FLAG = 'C'.
 MODIFY I_TAB INDEX COUNT.
 CONCATENATE mthead-mat_doc mthead-doc_year
 into i_msg1.
 append i_msg1.
 perform upd_sta.
 endif.
 endif.
 endif.
 ENDIF.
 ENDLOOP.

BAPI for Outbound Delivery Creation with reference to Sales Order - VL01N

Hi Everybody,
 We are in ECC 5.0 version.
 I want to create a enhancement for Outbound Delivery Creation with reference to a Sales Order.
 Is any BAPI available for this ?
 Any input on this will be very much helpfull.
 Please suggest any BAPI available for this, or should I go for BDC using VL01N or VL04 ?
 Thanks in advance.
regards,
Nagarajan.J

Hi Nagarajan,
The BAPI BAPI_DELIVERYPROCESSING_EXEC meets your requirement. You can create delivery with reference to sales order.
The below is the sample code...
data:lt_request like bapideliciousrequest
 occurs 0 with header line,
 lt_createditems like bapideliciouscreateditems
 occurs 0 with header line,
 lt_return like bapiret2
 occurs 0 with header line.
 lt_request-document_type = 'A'.
 lt_request-document_numb = vbeln.
 lt_request-document_item = posnr.
lt_request-material = matnr.
lt_request-plant = werks.
lt_request-stge_loc = lgort.
lt_request-quantity_base__uom = base_uom_qty.
lt_request-delivery_date = sy-datum.
append lt_request.
call function 'BAPI_DELIVERYPROCESSING_EXEC'
EXPORTING
 DELIVERY_EXTEND =
 TECHN_CONTROL =
 tables
 request = lt_request
 createditems = lt_createditems
 return = lt_return.
loop at lt_return where type = 'A'
 or type = 'E'.
 exit.
endloop.
if sy-subrc <> 0.
Use the BAPI for Commit
 call function 'BAPI_TRANSACTION_COMMIT'
 exporting
 wait = 'H'.
endif.
Thanks
Ramakrishna

BAPI for Outbound Delivery Creation with reference to Sales Order

Dear all,
I'm on R/3 4.6B platform and to develop an RFC for outbound Delivery creation instead of using the standard VL01N transaction.
I've review BAPI for Outbound Delivery Creation with reference to Sales Order - VL01N thread which suggest BAPI_DELIVERYPROCESSING_EXEC .
However, in 4.6B, that function module doesn't exist. Appreciate any suggestion and or workaround.
Thanks.
Steven
Edited by: Steven Khoo on Mar 25, 2010 7:13 AM
Edited by: Steven Khoo on Mar 25, 2010 7:14 AM

Not required anymore

BAPI for outbound delivery without order reference???????????????????

hello folks
i want to a bapi for transaction VL01NO. this transaction is used for creating outbound delivery wihtout a order reference. I did a search but was not able to find a bapi pls help.

Hi,
Could you please send me the sample code for BAPI_DELIVERYFREE_PROXY_CREATE? I am using the IDOC for outbound delivery w/o order reference. I didnt find any standard process code for this..
Any suggestions on the same??
Thanks,
Prasad

WMTA -- automatic TO for outbound Delivery

Similar Messages

Maybe you are looking for