.WMV exporting issues in FCP7

I have a 58 minute sequence in my timeline, and when I go to export the sequence as a .wmv, it only exports the first 25 seconds of the sequence. Why is this? Can it be fixed?

Just go to the website, there is the basic version and a couple of others including the Pro version.
Or you could go for something like Sorensen squeeze lite.
DM

Similar Messages

I have lost the export settings for FCP7. How can I get these back?

I accidentally threw a folder in the trash. I got a lot of stuff back using Data Rescue, but not everything.
I have lost the export settings for FCP7. How and Can I get these back? tia

Sorry for the delay in response. It sounds like you have somehow deleted your quicktime ProKit with the codecs by what ever process you were trying to restore you trashed files.
Go to the Apple Menu > System Updates and see if the updater sees a need to install them.
If this doesn't work - it might be
the best thing to do would be to get FCS Remover from Digital Rebellion (free)
http://www.digitalrebellion.com/fcsremover/
and try to remove all traces of your corrupt installation and then do a clean install from your original disks, followed by updates to restore the new ProKit codecs.
If your system has been corrupted by whatever you did, it might be best to wipe the drive and start from scratch - but understood this is not a pleasant choice.
Other posters may have different or better suggestions. The FCS Pro Apps require a lot of files and file structure that may or may not be apparent, and were never drag and drop installable. They always needed to be installed with the proper installer.
MtD

Need help with a unique WMV export

Hi, everyone! This is my first post on this board. I have a sequence in Final Cut Pro that is three 640x480 clips laid out end-to-end to make a 1920x480 movie. The total length of the program is 7-8 minutes.
I am needing to export this from Compressor to a Windows Media format to run on a high-end PC that will show it on 3 projectors using a Matrox TripleHead2Go box in a theatre environment. The PC is a Core 2 Duo 2.4Ghz, 2GB RAM, and has an ATI Radeon X1300 Pro video card with 256 RAM.
The movie needs to be as close to DVD quality as possible. I have WMV Studio Pro HD installed. What recommendations can anyone make for the best settings I should use - in Final Cut, Compressor and with the WMV export - to get a full 1920x480 movie that will run smooth and as high quality as possible on the theatre PC?
Thanks in advance.

I've found a wealth of knowledge at the Flip4Mac forum HERE.......Craig, the moderator, is quite the expert for questions like this.

Bizzare export issue

Here is a very weird export issue. Windows XP.
Project is set at h264 1920x1080 mono audio 29.97 fps
I have 30 shots that make up the sequence. Each shot is exactly 90 frames. I exported each sequence at h264 1920x1080 with one channel of audio. The first shot exports just fine and is 5 MB. The second shot exports at 10 MB. The third is 15 MB, the tenth shot is 50MB. But the picture is still 90 frames for each shot. BUT, when I export without audio each exported file is just 5 MB. If I look at the properties of each clip the duration of the video and audio is just 90 frames. If I open one of these clips in QuickTime Pro and re-export it as source then the files size goes back to 5 MB; same video, same audio yet with the correct file size.
Anyone seen this before?
Is there a setting that could be incorrect?
-cablet

Weird, man. Not sure what might cause that.

Crystal JRC PDF Export Issue

We are experiencing a PDF export issue with Crystal JRC version 12.2.202. The PDF report shows 1 of 3 pages but ONLY the first page is generated. When this occurs, ALL other users that are exporting to PDF experience the same issue with any multiple page report. I can't find any errors in the log that would indicate what the problem is. To resolve the issue, I have to recycle the WebLogic application server that hosts the JRC, which would indicate something gets "locked" in memory and gets cleared when the app server is bounced.
Any ideas on how to resolve this ?

Hi Ted,
Thanks for the response!
Though, the mentioned Sun JVM Bug explains the root-cause, the Bug status also state that it is not fixed yet.
Also, we are reluctant to change the JVM Option to -Xint due to unknown impacts on JVM optimizations.
Is there a patch released for CrystalReports to deal with this behavior? We are using CRJ runtime 11.5.7.620 and seeking for a patch on this version.
Thanks.

PP CS5.5 FLV To MP4 Export Issues / Problems

I just upgraded from Production Premium CS5 to CS5.5. I do a fair amount of converting/exporting of imported FLV files (downloaded from internet news sites) to H.264/AAC w/ MP4 wrappers using Premiere Pro (PP) and Adobe Media Encoder (AME). My equipment is a 1+ yr. old HP Win 7 Pro w/ an Intel i970 Quadcore, 12 Gb RAM and MSI nVidia GTX 470 GPU. I have never experienced any queue or export issues w/ CS5 (at least that I noticed), but I am experiencing noticeably degraded queue export and direct export problems with these files in CS5.5.
Description: (1) The queue export times for the exact same imported FLV clip(s) using the exact same sequence settings and H.264/MP4 export settings are noticeably slower in CS5.5 (sometimes 2x, depending on the export settings, e.g. using maximum render quality) than in CS5; (2) My MSI Afterburner GPU monitoring software indicates 5-10% GPU usage during queue/export in CS5, while indicating 0% GPU usage (flatline) in CS5.5; and (3) When I attempt to direct export these files using CS5.5 I get the following error message: "The source and output audio channels are not compatible or a conversion does not exist."
I suspect that it may have something to do with "conforming" anomalies when the FLV file is imported into PP, but I would put that squarely in the category of rank speculation on my part.
Has anyone experienced the same or similar problems or have any insight into what may be the problem(s)? Of course, thanks for any help/insight you can provide.
Jim

What do you mean by a better routine?
A better compression routine than H.264.
Is the quality better than H.264?
Yes.
Does this use an MOV wrapper?
Yes.
Also, would it import correctly into PPro?
Yes.
we would import files into PPro exported out of FCP and would get a red pixelated glitch during preview and export. Does this codec solve this problem as well if it is an MOV wrapper?
I don't know anything about FCP.
Sorry for all the questions, just want to get things right before diving into a new codec.
It's harmless, and free.
Download it and run some tests.

Simple flash export issue

hello
I'm trying to export a flash video using Adobe media encoder from Premier Pro, but when I do I get this error " there are no clips to build".
I have another file that I am able to export and it does not have this problem.
They are Windows Media files and play in Premier fine. I am using Premier Pro CS3.
Lastly, I'm not a video expert but I really need to get these up on the web for work, there is a lot of pressure and I need to get it done.
Regards,
Tom

fixed the exporting issue.

Where is WMV export?

Sadly a client needs WMV files for a project (we prefer H264 Quicktime!) and although it clearly says in the Compressor Introduction video http://www.apple.com/finalcutstudio/compressor/ that WMV export is included, we can't find it anywhere! Where is it?
Thanks!

Yeah...I ran into this too. Had to get Flip4Mac...Studio version for export. Very good, though...didn't break my bank, either.

Exporting ISSUES! Help

I am a relatively new user to lightroom. I haven't had any exporting issues until today. I am attempting to export a photo/photos to a specific folder with a custom name. When I do this it exports the WHOLE library and NOT the edited photo. What am I doing wrong??

Lightroom usually exports all images that are highlighted. If you only want to export one image then make sure it is the only image that is highlighted.

QT 7 Pro (Windows) missing WMV export option? It's in QT/Mac...

Bought QT Pro for my wife's XP computer, so she can convert small .mov files from textbook-bundled CDs to .avi/cinepak or wmv so that powerpoint can import them natively, and she can give them to teaching assistants to use in class sections. The exported file, when properties are viewed, has the exact same specs and codec as an avi file that plays fine within powerpoint. WMV plays them fine standalone.
Except, using the Window QT 7 pro, the converted .avi files will play within powerpoint (2003). It thinks it can read the avi (powerpoint will import them) and the slide shows the preview, but things just goes blank when you attempt to play. No error messages, no sound, no disk activity.
If I put the original .mov on my Mac, and export it with QT Pro, I have WMV 9 audio and video export formats available. QT Pro 7 Windows, has only mp4 (no formats of which are readable natively in powerpoint) and other non-useful formats, not including WMV9. It's just not there. avi w/cinepak/InterVideo etc. also fail to be properly formatted- they don't play in powerpoint.
What gives? The Windows version of QT Pro can't export to WMV format, the only one that goes natively into powerpoint?
The mp4 might be playable if I update to the latest directX, but you can't count on everyone having that, while WMV just works. And the Mac version actually works?
Granted powerpoint isn't the best thing but it is clear to me that the QT-exported avi is not properly formatted. And wy is there no WMV option- it's not ghosted as if the file was wont bit depth or or something for the format, it's just not an option when exporting from the Windows version of QT Pro.
If I wanted to et her up with ffmpegX and make this complicated, I could have. Buying the QT Pro was supposed to make it easy.
Thoughts?

sorry for typos, to make it clear, .avi files converted by QT 7 Pro Windows from .mov do NOT play in Powerpoint 2003, although they do import. The video codec and audio are same settings as .avi files that DO import (and were not converted by QT).
Performing a conversion to WMV9 format on my Mac QT Pro 7 imports fine into Windows powerpoint. There is not a WMV export option on the Windows QT pro.
I'd prefer to have WMV export but would settle for .avi it it would import and play as I need it to.
The converted .avi file plays fine in Windows Media Player under XP. Just not in Powerpoint.
Office and XP updates are very recent, within 2 months for sure.
Thanks for help.

Exporting issues after 4.2 upgrade

Has anyone else experienced exporting issues after installing the 4.2 upgrade? It used to be a breeze but now I keep getting the message that a destination folder has not been specified even though I've done that. Any feedback would be greatly appreciated! Thank you.

Are you using an Export preset, or setting the Export up manually each time?

No WMV export possible using windows 8.1x64 (AE and Premiere CC Installed)

No matter what I do, WMV export is missing on AME CC available formats...
I got both Premiere and After Effects CC installed, and funny thing is:
Pr and AE can export in WMV and lots other formats...
I already resintalled both Pr/AME and problem persists...
But AME, only these:
Any clues?
Sorry my bad english

Hi John, thank you for the reply! Argh, can't believe I forgot to post that info... Here's the specs, and I did go download Nvidia's installer for the driver so hopefully it is all well.
Andy
NVIDIA System Information report created on: 08/28/2014 23:56:30
System name: USER-PC
[Display]
Operating System: Windows 8.1 Pro, 64-bit
DirectX version: 11.0
GPU processor: GeForce GTX 780
Driver version: 340.52
Direct3D API version: 11.1
Direct3D feature level: 11_0
CUDA Cores: 2304
Core clock: 967 MHz
Memory data rate: 6008 MHz
Memory interface: 384-bit
Memory bandwidth: 288.38 GB/s
Total available graphics memory: 38882 MB
Dedicated video memory: 6144 MB GDDR5
System video memory: 0 MB
Shared system memory: 32738 MB
Video BIOS version: 80.80.45.00.80
IRQ: 40
Bus: PCI Express x16 Gen2
Device Id: 10DE 1004 17873842
Part Number: 2083 0021
[Components]
NvGFTrayPluginr.dll 15.3.33.0 NVIDIA GeForce Experience
NvGFTrayPlugin.dll 15.3.33.0 NVIDIA GeForce Experience
nvui.dll 8.17.13.4052 NVIDIA User Experience Driver Component
nvxdsync.exe 8.17.13.4052 NVIDIA User Experience Driver Component
nvxdplcy.dll 8.17.13.4052 NVIDIA User Experience Driver Component
nvxdbat.dll 8.17.13.4052 NVIDIA User Experience Driver Component
nvxdapix.dll 8.17.13.4052 NVIDIA User Experience Driver Component
NVCPL.DLL 8.17.13.4052 NVIDIA User Experience Driver Component
nvCplUI.exe 7.8.760.0 NVIDIA Control Panel
nvWSS.dll 6.14.13.4052 NVIDIA Workstation Server
nvViTvS.dll 6.14.13.4052 NVIDIA Video Server
NVMCTRAY.DLL 8.17.13.4052 NVIDIA Media Center Library
nvDispS.dll 6.14.13.4052 NVIDIA Display Server
PhysX 09.13.1220 NVIDIA PhysX
NVCUDA.DLL 8.17.13.4052 NVIDIA CUDA 6.5.12 driver
nvGameS.dll 6.14.13.4052 NVIDIA 3D Settings Server

FCP truncates .wmv export?

Does FCP Pro stop exporting a .wmv file from a sequence because of some setting that I can control? I've tried on several projects and it stops half way through.

Welcome to the forum!
Can you post a little more about your system and what steps you're taking? OS, QT, FCP flip4mac versions as well as Mac info might help in diagnosing the problem.
Also, does the export stop at the exact same place every time? If so, it may be a corrupted media or render file. And one last thing; if you have the trail version of flip4mac, your WMV exports will be limited to 30 seconds or so.
-DH

Reporting Export Issue from Taleo

Can anyone help? We have a work around for the Exporting Issues into Excel 2010 regarding figures and dates only reading as text, however, a new issue has arisen. In one field we have Aggregated Agencies assigned to any particular Job Code. In the legacy reports, every agency name exported into one cell in Excel, now they export into individual rows, this causes a report to be too long and there is no way to amalgamate them into one cell. Has anyone found a workaround for this?

is there someway that it was reformatted by the Iomega drive being daisy chained to it?
No. That is not possible -anyway, reformatting erases everything on a drive.
You would have noticed that first.
You can download the [NTFS-3G driver|http://macntfs-3g.blogspot.com> which will let you read, write and even reformat the clients drive as NTFS on the Mac. All reasonably modern Windows PCs work with this disc format and you won't run into the file size limitations associated with FAT formatted drives.

Using 128bit key Blowfish and any export issues

Hi,
I want to use blowfish (symmetric key algorithm) in my product and which will be shipped outside US. Reading Sun's documentation I am bit confused and I am not sure if the jce package is going to be available outside the US.
Has anyone used the default available symmetric key algorithms in the JCE package (javax.crypto.*) and faced any export control issues ?
Please let me know.
Thanks
RT
Here is a sample code
String ks = "123456789123456";
kb = ks.getBytes();
SecretKeySpec key = new SecretKeySpec(kb,"blowfish");
Cipher cipher = Cipher.getInstance("blowfish");
// Initialisation of cipher object for Encryption.
cipher.init(Cipher.ENCRYPT_MODE, key);

1. the issue is rather an import issue for some countries, than an export issue for US as far as you use jre>=1.4 .
you can read the
'Downloading the "Unlimited Strength" Jurisdiction Policy Files'
section of
http://java.sun.com/products/jce/javase.html
2. The restricted (defualt) shipped version already covers Blowfish if you mind that.
3. I use Blowfish with restricted (default) version of JCE in applications deployed in europe and have not heard of customer complaining sofar: they are supposed to use webstart or jre1.5.

.WMV exporting issues in FCP7

Similar Messages

Maybe you are looking for