WMV, QT plugins are not working within Opera
I found this is quite strange, but I wasn't sure whether I performed the right steps.
Here goes....
pacman would normally "auto-configure" your plugins to work with Fireforx browser, but not Opera in this case.
First it's flash plugin. What I did was simply copying "libflashplayer.so" from /opt/mozilla-plugins/ to /usr/lib/opera/plugins, and it worked.
To note: Creating soft link to in between these two directories worked well too.
Next, I copied out all mplayer-plug-in-* from the same path to opera plugins folder, and it didn't work. I tried to create soft link in between, and it didn't work as well.
Can anyone help me?
Thanks
just a few words of explanation: install mozplugger, ln -sf /opt/mozilla-plugins/.../mozplugger.so /usr/libs/opera/..../mozplugger.so
(don't remember the paths correctly)
then in opera -> find new plugins and everything should work
Similar Messages
-
NIK plugins are not working in LR 4
I have been using the BETA version for some time and I did not see this problem until I installed the released version of LR 4
The problem is that I cannot edit the images using my plugis from NIK software. ( I bought the complete collection about 3 months ago)
In the Beta version it was still OK.
Only the export plugin works (HDR from nik)
Also when I try to install the plugin again it only shows that it is compatible with LR3.
I just bought LR4 (since it worked in the BETA version)
Hope they will fix this soon. I also sent a message to NIK software.
anyone else has seen this problem
regards
Andre
I use MAC OS-X 10.7.3
NIK plugins are the latest versions available.Windows 7 64-bit SP1 machine here.
Yesterday, as most of you here, I had this error message with any
external editor, and I posted a message in this forum. At night, before
going to bed, I installed an evaluation version of Photoshop Elements
10. This morning I opened Lightroom and, TADA!, plugins work fine! So
definitely it is an Adobe problem, LR must be missing some piece of
software that PSE has; note that I did not open PSE at all after
installing it yesterday night, so it has added the missing part during
installation.
Hope this helps Adobe engineers to solve the problem.
Il 07/03/2012 08:06, Michael Rainwater ha scritto:
>
Re: NIK plugins are not working in LR 4
created by Michael Rainwater
<http://forums.adobe.com/people/WeberPoint> in /Photoshop Lightroom/ -
View the full discussion
<http://forums.adobe.com/message/4250222#4250222 -
Npapi or webkit plugin are not working in firefox
I have a Webkit plugin and NPAPI plugin. Both work fine in Safari but just would not work in Firefox (Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.6; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3) .
about:plugins shows it as installed but when I try to access it from html page none of the entry points in a code are being called.(None of trace statement are being hit)
I think Firefox has problem loading those plugins.
I have similar NPAPI plugin working fine in Windows environment on all browsers, but MAC is giving me this problem.
Does anyone has any ideas of what could be the problem?
I even took a BASICPLUGIN sample for MAC and it has the same problem. Anyb
== This happened ==
Every time Firefox openedChristofer,
I solved my problem after not getting any responses.....
Turns out that some of my xcode compilation switches had to be changed, send me your minimal code that I can compile and i will help you finding it......My NSAPI plugin works just great with all mac browsers....in fact it is the same code excatly as i have for windows, just had to rename some files from .cpp to .m so that I could yuse some cocoa objects....
Mark -
Adobe Plugins are not working for Firefox or Explorer 8
HI There,
my firefox and explorer do not open adobe reader files any more. IN firefox it opens it in a different viewer and when it prints it prints the document as an artifact and the letters are not clear (almost looks like a blurry .jpg). The plug in is installed but when I go to adobe reader under preferences then internet it says that the program is not available. I have tried uninstalling and reinstalling acrobat and it still does not work. I intalled the latest Java thinking that was the issue but still the same. I can not find a way to delete and reinstall the plugins in Firefox or Explorer. Are they built into the new Adobe Reader?Can you guide me on how to change it to adobe reader as the default. I can't figure out where this option is.
I have to get access to the computer with the probloem to pull up the error message when trying to open a pdf file in Explorer. I think it says that it can`t find the program or to try shutting adobe down and try again. -
I have a iMac running on an iMac and the F operation keys are not working properly.
My new iMac bluetooth keyboard is having issues all of the F operation keys are not working exept for F12 witch is supposed to be volume up takes me to mission control. I went into system prefrences and there was no setting in keyboard for the volume keys there are some settings for the operation keys but they are all checked and they are still not working and the settings that are checked arn't even what the keys are supposed to do. Please help.
SMC RESET
http://support.apple.com/kb/HT3964
Shut down the computer.
Unplug the computer's power cord and ALL peripherals.
Wait 15 seconds.
Attach the computers power cable.
Wait another 5 seconds and press the power button to turn on the computer.
The 5 second timing is important to a successful reset.
PRAM RESET
Zap the PRAM
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys. -
I was running KeyPassFox with Firefox 8.0.1, but the plugin does not work in the new release (9) . Is there a way to restore my previous version with all of my bookmarks intact? I do not mind if I have to restore the plugins myself.
The plugin shows on the list as enabled and functioning, yet the tool does not show on the toolbar. It would appear that I need to restore the previous version of Firefox and wait until a newer release of the plugin is available before upgrading the browser.I copied the iTunes file from the external drive and it's in both places. I thought all I would need is the iTunes program (which I downloaded to new computer) and my iTunes library file. There must be something else that's missing. My iTunes library looks the same on the new computer as it does when I open it on the external drive. If I click on an iTunes library song from my new computer, it will only play if I have the external drive plugged in.
My back-up drive is a mess. I have multiple copies of music, video, photo, and document files and I don't know how that happened. ={ Obviously, I don't know how to back up stuff properly and there are back-up files extending over a 6- to 8-year period. I think all I did was just drag and drop the main folders from the back-up drive to the same main folders on the C: drive. Also (and I'm kind of fuzzy on this) Windows used to automatically save music files in a folder within my document files (which makes no sense to me). As my Jewish friends would say, "Oy Vey!" -
Fox news slideshows are not working in Vista Home 64 bit.
All fox news slideshows are not working since firefox 3.6 started. I can't get them to work in Internet explorer either.
== URL of affected sites ==
http://Error: $.ad is undefined
Source File: http://www.foxnews.com/static/all/js/slideshows-pack.js
Line: 850
// Slideshows - updated: 04/30/2010
// Dependencies: jQuery, jfoxCarousel plugin
(function($){
function SlideShows() {
this._data = {}; // slideshow data
this._info = {}; // current slideshow info
this._relatedMedia = {}; // related media data
this._trackData = false;
this.initialized = false;
this.toolTipId = "carousel-tooltip";
this.defaultTrackFrequency = 1; // tracker trigger
this._preloaderSrc = "/static/all/img/slideshow/slideshow-preloader.gif";
this._timer = { // timers
main: { fadeIn:800 },
carousel: { fadeIn:300 },
overlay: { onLast:10000,fadeIn:300,fadeOut:300 }
this.currentFocus = 1; // current item in focus
this.holderObj = {}; // holder for elements
this.hashObj = {}; // hash location holder
this.imgPreloadObj = {}; // holder for preloaded images
// carousel object controllers
this.carouselControlObj = {};
this.overlayControlObj = {};
this.trigger = { // listeners
main: false,
carousel: false,
overlay: false
this.overlayTimeout = false; // overlay timeout holder
SlideShows.prototype = {
init: function(config) {
for (i in config) { this['_'+i] = config[i]; }
this.main.root = this.carousel.root = this.overlay.root = this;
this.hashObj = this.helper.getHash();
if (typeof $.fn.jfoxCarousel<u>'undefined') {
showToConsole("[init] Error: carousel plugin not found!");
if (this._trackData) { // set tracking data
sTracker.set(this._trackData);
sTracker.track("pageLoad"); // page load tracker
this.preload();
this.setHolders();
this.initialized = true;
preload: function() {
var preloadImg = new Image();
preloadImg.src = this.preloadSrc;
setHolders: function() {
var SH = this;
var slideshowElm = $("#slideshow");
this.holderObj = {
doc: $(document),
body: $("body"),
intro: $("#section-intro"),
main: slideshowElm.find("#main-img"),
mainHolder: slideshowElm.find(".slideshow-placeholder"),
mainControl: slideshowElm.find(".slideshow-controller"),
description: slideshowElm.find(".slideshow-desc"),
relatedMedia: slideshowElm.find(".slideshow-related"),
carousel: slideshowElm.find(".slideshow-feature .slideshow")
this.holderObj.intro.each(function(){
var intro = $(this);
intro.find("h1:first").html(SH._info.title);
intro.find("p:first").html(SH._info.dek);
if (this.holderObj.main.size()>0) {
this.main.properties.minHeight = this.holderObj.mainHolder.innerHeight(); // get set height as "min-height"
this.main.build();
if (this.holderObj.carousel.size()>0) {
this.carousel.build();
$(document).ready(function(){ // wait for page load for the overlay
SH.holderObj.overlay = $("#slideshow-overlay");
var set = (SH.holderObj.overlay.size()>0) ? (typeof $.fn.jfoxCarousel!=='undefined') ? SH.overlay.set() : false : false;
SH.setDocReadyListeners();
this.setListeners();
setListeners: function() {
var SH = this;
var control = this.holderObj.mainControl;
// main image controls
control.find(".prev").click(function(){
SH.main.prev();
return false;
control.find(".next").click(function(){
SH.main.next();
return false;
if (typeof touchEventListener!=="undefined") {
var listenerConfig = {
elm: SH.holderObj.mainHolder,
moveSensitivity: 15,
eventsCallback: {
touchmoveMoveOnce: function(direction,moveProperties,rawEvent) {
// move callback - sensitivity
var directions = direction.join("|");
if (directions.indexOf("left")>-1) {
control.find(".next").trigger("click");
if (directions.indexOf("right")>-1) {
control.find(".prev").trigger("click");
touchEventListener.append(listenerConfig);
setDocReadyListeners: function() {
var SH = this;
// browse slideshow overlay
$(document).ready(function(){
$("#section-intro .additional-slides a").click(function() {
SH.overlay.show();
return false;
SH.holderObj.overlay.find(".close a").click(function(){
SH.overlay.hide();
return false;
replaySlideshow: function() {
var SH = this;
//TODO: build replay
this.overlay.hide(); // hide overlay
this.main.build(this.currentFocus = 1); // reset focus
sTracker.track("replaySlideshow");
// main image holder
SlideShows.prototype.main = {
properties: {},
build: function(slide,origin) {
var SH = this;
var root = this.root;
if (root.trigger.main) { return false; }
root.trigger.main = true;
slide = slide || false;
origin = origin || "main";
var control = root.holderObj.mainControl;
var data = root._data;
var initData = false;
var desc = [];
var helper = root.helper;
if (slide) {
if (slide 0) { desc.push('Source: ' + data.items[slide].source + ''); }
root.holderObj.description.html(desc.join(""));
// load related media
if (root._relatedMedia.items) {
var rmItems = root._relatedMedia.items;
if (rmItems.length>0) {
var rel = [];
rel.push('Related Articles');
for (var x=0; x 0) {
root.currentFocus--;
SH.build(root.currentFocus);
sTracker.track("clickPrevMain"); // tracker
if (!SH.isLast() && root.overlayTimeout) { clearTimeout(root.overlayTimeout); } // clear overlay timeout
isLast: function() {
var root = this.root;
return (root.currentFocus+1 > root._data.items.length) ? true : false;
// carousel
SlideShows.prototype.carousel = {
build: function() {
var SH = this;
var root = this.root;
var carousel = root.holderObj.carousel;
var data = root._data;
var list = [];
for (var x=0;x 0) {
var li = $(".slideshow > ul",carousel).children();
li.each(function(i){
var el = $(this);
var setClass = (i == eventObj.target-1) ? el.addClass("active") : el.removeClass("active");
controlsCallback: function(control) { // callback to set up controls
root.carouselControlObj = control;
carousel.find(".prev").click(function(){ // previous link
control.stopAutoScroll();
control.slide('prev');
sTracker.track("clickPrevCarousel"); // tracker
return false;
carousel.find(".next").click(function(){ // next link
// show overlay on last carousel link
//var lastLink = (!currentEventObj) ? false : (currentEventObj.batch.current+1 > currentEventObj.batch.max) ? $(document).ready(function(){ root.overlay.show(false,true); }) : false;
control.stopAutoScroll();
control.slide('next');
sTracker.track("clickNextCarousel"); // tracker
return false;
carousel.jfoxCarousel(config);
if (typeof touchEventListener!=="undefined") {
var listenerConfig = {
elm: carousel,
moveSensitivity: 15,
eventsCallback: {
touchmoveMoveOnce: function(direction,moveProperties,rawEvent) {
// move callback - sensitivity
var directions = direction.join("|");
if (directions.indexOf("left")>-1) {
carousel.find(".next").click();
if (directions.indexOf("right")>-1) {
carousel.find(".prev").click();
touchEventListener.append(listenerConfig);
// overlay
SlideShows.prototype.overlay = {
set: function() {
var root = this.root;
var overlay = root.holderObj.overlay;
overlay.find(".slideshow-feature").each(function(){
var carousel = $(this);
var allItems = carousel.find(".slideshow ul").children().children();
allItems.each(function(){
var div = $(this);
var link = div.find("a:first").attr("href");
div.hover(function(){
div.css("cursor","pointer");
},function(){
div.css("cursor","");
}).unbind("click").click(function(){
window.location.replace(window.location.hostname + link);
var config = {
auto: { set:false,speed:3000 }, // auto scroll
slide: "horizontal", // horizontal or vertical
scroll: 3, // number of items to scroll per event
show: 3, // items shown
speed: "slow", // scroll speed
rotate: false, // rotate back to star if end
//focus: { item:0,animate:false }, // focus to target item on load
eventCallback: function(eventObj) {
if (eventObj.batch.current</u>1) {
carousel.find(".prev").addClass("inactive");
} else {
carousel.find(".prev").removeClass("inactive");
if (eventObj.batch.current<u>eventObj.batch.max) {
carousel.find(".next").addClass("inactive");
} else {
carousel.find(".next").removeClass("inactive");
controlsCallback: function(control) { // callback to set up controls
root.overlayControlObj = control;
carousel.find(".prev").click(function(){ // previous link
control.stopAutoScroll();
control.slide('prev');
sTracker.track("clickPrevOverlay"); // tracker
return false;
carousel.find(".next").click(function(){ // next link
control.stopAutoScroll();
control.slide('next');
sTracker.track("clickNextOverlay"); // tracker
return false;
carousel.jfoxCarousel(config);
if (typeof touchEventListener!=="undefined") {
var listenerConfig = {
elm: carousel,
moveSensitivity: 15,
eventsCallback: {
touchmoveMoveOnce: function(direction,moveProperties,rawEvent) {
// move callback - sensitivity
var directions = direction.join("|");
if (directions.indexOf("left")>-1) {
carousel.find(".next").click();
if (directions.indexOf("right")>-1) {
carousel.find(".prev").click();
touchEventListener.append(listenerConfig);
show: function(delay,isReplay) {
isReplay = isReplay || false;
delay = delay || false;
var root = this.root;
if (root.trigger.overlay) { return false; } // if already open
var SH = this;
delay = (isNaN(delay)) ? 0 : delay; // delayed show
root.overlayTimeout = setTimeout(function(){
SH.setReplay(isReplay);
if (root.main.isLast()) {
root.holderObj.overlay.fadeIn(root._timer.overlay.fadeIn,function(){ root.trigger.overlay = true; });
sTracker.track("showOverlay"); // tracker
else {
root.holderObj.overlay.fadeIn(function(){ root.trigger.overlay = true; });
},delay);
hide: function(delay) {
delay = delay || false;
var root = this.root;
if (!root.trigger.overlay) { return false; } // if already closed
delay = (isNaN(delay)) ? 0 : delay; // delayed hide
setTimeout(function(){
root.holderObj.overlay.fadeOut(root._timer.overlay.fadeOut,function(){ root.trigger.overlay = false; });
sTracker.track("hideOverlay"); // tracker
},delay);
setReplay: function(isReplay) {
var root = this.root;
var overlay = root.holderObj.overlay;
var firstList = overlay.find(".slideshow-feature .slideshow ul").children().filter(":first");
var divs = firstList.children();
var replayDiv = divs.filter(":first");
var cloneDiv = replayDiv.next();
function configInfo(elm) {
var currentSS = root._data.items;
var info = root._info;
var count = currentSS.length;
var first = currentSS[0];
var slideshowTitle = (info.title.length > 16) ? info.title.substring(0,16) + "..." : info.title;
var slideshowImg = first.media.tm;
var slideshowDate = info.title.date;
function replay() {
root.replaySlideshow();
var items = elm.children();
items.filter("p.photo-count").html(count + " image" + [[count>1) ? "s" : ""]];
items.filter("p.date").html(slideshowDate);
items.filter("p.photo").each(function(){
var item = $(this);
item.find("a").attr({ href: "#", title: slideshowTitle });
item.find("img").attr({ alt: slideshowTitle, src: slideshowImg });
items.filter("h4").each(function(){
var item = $(this);
item.find("a").attr("href","#").html(slideshowTitle);
items.find("a").unbind("click").click(function(){
replay();
return false;
elm.hover(function(){
elm.css("cursor","pointer");
},function(){
elm.css("cursor","");
}).unbind("click").click(function(){
replay();
return false;
if (replayDiv.children().size()</u>0) {
replayDiv.html(cloneDiv.html());
configInfo(replayDiv);
if (isReplay) {
replayDiv.addClass("active").show();
cloneDiv.hide();
} else {
replayDiv.hide();
cloneDiv.show();
SlideShows.prototype.helper = {
toNum: function(item) {
item = (isNaN(item)) ? parseInt(item.replace(/[a-zA-z]/gi,""),10) : item;
return isNaN(item)?0:item;
imgLoad: function(obj,fn) {
var SH = this;
obj.alt = obj.alt || "";
if (obj.preload && !$.browser.opera) { // opera =/= img.onload
if (obj.mainHolder) { obj.mainHolder.css({ background:"url("+obj.preloaderSrc+") no-repeat center" }); }
var img = new Image();
obj.holder.css({ display:"inline", opacity:"0" });
img.onload = function() {
if (obj.outer) {
if (img.height > SH.toNum(obj.outer.minHeight)) { obj.outer.holder.css("height","auto"); }
else { obj.outer.holder.css("height",obj.outer.minHeight); }
obj.holder.attr("src",obj.src).animate({ opacity:"1"},obj.speed,"linear",function(){
if (obj.mainHolder) { obj.mainHolder.css({ backgroundImage:"none" }); }
$(this).attr("alt",obj.alt);
fn();
img.src = obj.src;
} else {
if (obj.mainHolder) { obj.mainHolder.css({ backgroundImage:"none" }); }
obj.holder.css({ display:"inline", opacity:"0" });
obj.holder.attr({
src: obj.src,
alt: obj.alt
}).animate({ opacity:"1"},obj.speed,"linear",function(){ fn(); });
getHash: function() {
var hash = (window.location.hash).substr(1);
if (hash) {
var pairs = hash.split('&');
var valuePair = {};
for (var x=0;x 1 && callback && count%freq<u>0) {
callback(data);
var sTracker = new Trackers(); // private
function showToConsole(str) {
if (typeof window.console</u>'object') { console.log(str); }
var slideShowsPack = window.slideShowsPack = new SlideShows();
})(jQuery);
// Tracking Data Here
var trackData = {
ads: {
buildSlide: {
frequency: 1,
callback: function() {
$(document).ready(function(){
if (typeof $.ad.dc.load!=="undefined") {
$.ad.dc.load();
omni: {
buildSlide: {
frequency: 1,
callback: function(data) {
data = data || false;
if (!data) { return false; }
if (!data.slideNumber) { return false; }
if (typeof $.ad.omni.load!=="undefined") {
$.ad.omni.load({ "slide": data.slideNumber });
var initializeSlideShow = window.initializeSlideshow = function() {
if (typeof slideshowData!=="undefined") {
if (!slideShowsPack.initialized) {
slideShowsPack.init({
data: slideshowData,
info: slideshowInfo,
relatedMedia: relatedsData,
trackData: trackData
} else {
if (typeof window.console==='object') { console.log("[error] No Data found for: slideshowData"); }
This the line highlighted:
if (typeof $.ad.dc.load!=="undefined") { -
Adobe flash player 10.1.102.64 not working in opera 11
hi
i am using IE and opera 11.
for IE flash player 10.1.102.64 is working in the youtube.....
but
while using OPERA 11its not working? pls feel free to reply me:
what i was done is.
1.i disable antivirus
2.select my operating system and bowers
3.close my all browers which are running
after this also its not work in opera 11Hi, With Flash Player, there is an ActiveX Control in IE which is Shockwave Flash Object which if IE is working for you then you have it.
In all non-IE browsers there is a Shockwave Flash (SWF) and it is Installed as a plugin and must be Enabled.
You can check there for it.
Hope that helps,
eidnolb -
Page Break In XML Publisher RTF Templates Are Not Working
Please refer to the Metalink Doc below:
Subject: Page Break In XML Publisher RTF Templates Are Not Working.
Doc ID: 559111.1
Type: PROBLEM
Modified Date: 24-MAR-2008
Status: MODERATED
In this Document
Symptoms
Cause
Solution
References
This document is being delivered to you via Oracle Support's Rapid Visibility (RaV) process, and therefore has not been subject to an independent technical review.
Applies to:
Oracle XML Publisher - Version: 5.6.3
This problem can occur on any platform.
Symptoms
Using XML Publisher version 5.6.3 in 11.5.10.
Find <?split-by-page-break:?> syntax is ignored.
EXPECTED BEHAVIOR
Expect page breaks to occur at point set by "split-by-page-break:" code.
STEPS
The issue can be reproduced at will with the following steps:
1. Create a template.
2. Call split-by-page-break: inside a loop.
3. Output is not formatted correctly, page break call is ignored,
Cause
Unpublished BUG 5011628 SPLIT-BY-PAGE-BREAK NOT WORKING IF ADDED SORT WITHIN DYNAMIC GROUP
Unpublished BUG 5011628 matches the client issue as it is a call to split-by-page-break inside a loop.
Fix is in ScalableStringList.java version 115.4.
This is delivered in <Bug 6165466> XDOFX:CHR(N) FUNCTION FAILING.
Solution
To implement the solution, please execute the following steps:
1. Apply Patch 6165466 when it is released.
2. Test your report.
References
Bug 6165466 - XDOFX:CHR(N) FUNCTION FAILING
Keywords
XML~PUBLISHER; LOOP; DYNAMIC~GROUP; PAGE~BREAK;
Help us improve our service. Please email us your comments for this document. .Hi JDev,
Check this out:
http://oracle.anilpassi.com/xml-publisher-developing-reports-printed-on-pre-printed-stationary-2.html
Hope this might help.
Thanks -
Case statement and Decode function both are not working in Select cursor.
I have tried both the Case statement and Decode function in Select cursor, but both the things are not working. On the other hand both the things work in just select statement.
See the first column in select (PAR_FLAG), I need to have this evaluated along with other fields. Can you please suggest some thing to make this work. And also I would like to
know the reason why decode is not working, I heard some where Case statement do not work with 8i.
Author : Amit Juneja
Date : 06/20/2011
Description:
Updates the Diamond MEMBER_MASTER table with the values from
INC.MEM_NJ_HN_MEMBER_XREF table.
declare
rec_cnt number(12) := 0;
commit_cnt number(4) := 0;
cursor select_cur is
Select DECODE(1,
(Select 1
from hsd_prov_contract R
where R.seq_prov_id = PM.seq_prov_id
and R.line_of_business = H.line_of_business
and R.PCP_FLAG = 'Y'
and R.participation_flag = 'P'
and SYSDATE between R.EFFECTIVE_DATE AND
NVL(R.TERM_DATE,
TO_DATE('31-DEC-9999', 'DD-MON-YYYY'))),
'Y',
'N') PAR_FLAG,
H.SEQ_ELIG_HIST,
H.SEQ_MEMB_ID,
H.SEQ_SUBS_ID,
H.SUBSCRIBER_ID,
H.PERSON_NUMBER,
H.EFFECTIVE_DATE,
H.TERM_DATE,
H.TERM_REASON,
H.RELATIONSHIP_CODE,
H.SEQ_GROUP_ID,
H.PLAN_CODE,
H.LINE_OF_BUSINESS,
H.RIDER_CODE_1,
H.RIDER_CODE_2,
H.RIDER_CODE_3,
H.RIDER_CODE_4,
H.RIDER_CODE_5,
H.RIDER_CODE_6,
H.RIDER_CODE_7,
H.RIDER_CODE_8,
H.MEDICARE_STATUS_FLG,
H.OTHER_STATUS_FLAG,
H.HIRE_DATE,
H.ELIG_STATUS,
H.PREM_OVERRIDE_STEP,
H.PREM_OVERRIDE_AMT,
H.PREM_OVERRIDE_CODE,
H.SEQ_PROV_ID,
H.IPA_ID,
H.PANEL_ID,
H.SEQ_PROV_2_ID,
H.SECURITY_CODE,
H.INSERT_DATETIME,
H.INSERT_USER,
H.INSERT_PROCESS,
H.UPDATE_DATETIME,
H.UPDATE_USER,
H.UPDATE_PROCESS,
H.USER_DEFINED_1,
H.SALARY,
H.PEC_END_DATE,
H.REASON_CODE,
H.PEC_WAIVED,
H.BILL_EFFECTIVE_FROM_DATE,
H.BILLED_THRU_DATE,
H.PAID_THRU_DATE,
H.SUBSC_DEPT,
H.SUBSC_LOCATION,
H.USE_EFT_FLG,
H.BENEFIT_START_DATE,
H.SEQ_ENROLLMENT_RULE,
H.MCARE_RISK_ACCRETION_DATE,
H.MCARE_RISK_DELETION_DATE,
H.MCARE_RISK_REFUSED_DATE,
H.COMMENTS,
H.USER_DEFINED_2,
H.USER_DEFINED_3,
H.RATE_TYPE,
H.PCPAA_OCCURRED,
H.PRIVACY_ON,
H.PCP_CHANGE_REASON,
H.SITE_CODE,
H.SEQ_SITE_ADDRESS_ID,
PM.seq_prov_id rendered_prov
from hsd_member_elig_history H,
INC.PCP_REASSIGN_RPRT_DATA P,
hsd_prov_master PM
where P.subscriber_id = H.subscriber_id
and P.rendered_pcp = PM.provider_ID
and H.elig_status = 'Y'
and (H.term_date is NULL or H.term_date >= last_day(sysdate))
order by H.Seq_memb_id;
begin
for C in select_cur loop
rec_cnt := rec_cnt + 1;
update hsd_member_elig_history
set term_date = TRUNC(SYSDATE - 1),
term_reason = 'PCPTR',
update_datetime = SYSDATE,
update_user = USER,
update_process = 'TD33615'
where seq_elig_hist = C.seq_elig_hist
and seq_memb_id = C.seq_memb_id;
INSERT INTO HSD_MEMBER_ELIG_HISTORY
(SEQ_ELIG_HIST,
SEQ_MEMB_ID,
SEQ_SUBS_ID,
SUBSCRIBER_ID,
PERSON_NUMBER,
EFFECTIVE_DATE,
TERM_DATE,
TERM_REASON,
RELATIONSHIP_CODE,
SEQ_GROUP_ID,
PLAN_CODE,
LINE_OF_BUSINESS,
RIDER_CODE_1,
RIDER_CODE_2,
RIDER_CODE_3,
RIDER_CODE_4,
RIDER_CODE_5,
RIDER_CODE_6,
RIDER_CODE_7,
RIDER_CODE_8,
MEDICARE_STATUS_FLG,
OTHER_STATUS_FLAG,
HIRE_DATE,
ELIG_STATUS,
PREM_OVERRIDE_STEP,
PREM_OVERRIDE_AMT,
PREM_OVERRIDE_CODE,
SEQ_PROV_ID,
IPA_ID,
PANEL_ID,
SEQ_PROV_2_ID,
SECURITY_CODE,
INSERT_DATETIME,
INSERT_USER,
INSERT_PROCESS,
UPDATE_DATETIME,
UPDATE_USER,
UPDATE_PROCESS,
USER_DEFINED_1,
SALARY,
PEC_END_DATE,
REASON_CODE,
PEC_WAIVED,
BILL_EFFECTIVE_FROM_DATE,
BILLED_THRU_DATE,
PAID_THRU_DATE,
SUBSC_DEPT,
SUBSC_LOCATION,
USE_EFT_FLG,
BENEFIT_START_DATE,
SEQ_ENROLLMENT_RULE,
MCARE_RISK_ACCRETION_DATE,
MCARE_RISK_DELETION_DATE,
MCARE_RISK_REFUSED_DATE,
COMMENTS,
USER_DEFINED_2,
USER_DEFINED_3,
RATE_TYPE,
PCPAA_OCCURRED,
PRIVACY_ON,
PCP_CHANGE_REASON,
SITE_CODE,
SEQ_SITE_ADDRESS_ID)
values
(hsd_seq_elig_hist.nextval,
C.SEQ_MEMB_ID,
C.SEQ_SUBS_ID,
C.SUBSCRIBER_ID,
C.PERSON_NUMBER,
trunc(SYSDATE),
C.TERM_DATE,
C.TERM_REASON,
C.RELATIONSHIP_CODE,
C.SEQ_GROUP_ID,
C.PLAN_CODE,
C.LINE_OF_BUSINESS,
C.RIDER_CODE_1,
C.RIDER_CODE_2,
C.RIDER_CODE_3,
C.RIDER_CODE_4,
C.RIDER_CODE_5,
C.RIDER_CODE_6,
C.RIDER_CODE_7,
C.RIDER_CODE_8,
C.MEDICARE_STATUS_FLG,
C.OTHER_STATUS_FLAG,
C.HIRE_DATE,
C.ELIG_STATUS,
C.PREM_OVERRIDE_STEP,
C.PREM_OVERRIDE_AMT,
C.PREM_OVERRIDE_CODE,
C.SEQ_PROV_ID,
C.IPA_ID,
C.PANEL_ID,
C.SEQ_PROV_2_ID,
C.SECURITY_CODE,
SYSDATE,
USER,
'TD33615',
SYSDATE,
USER,
'TD33615',
C.USER_DEFINED_1,
C.SALARY,
C.PEC_END_DATE,
C.REASON_CODE,
C.PEC_WAIVED,
C.BILL_EFFECTIVE_FROM_DATE,
C.BILLED_THRU_DATE,
C.PAID_THRU_DATE,
C.SUBSC_DEPT,
C.SUBSC_LOCATION,
C.USE_EFT_FLG,
C.BENEFIT_START_DATE,
C.SEQ_ENROLLMENT_RULE,
C.MCARE_RISK_ACCRETION_DATE,
C.MCARE_RISK_DELETION_DATE,
C.MCARE_RISK_REFUSED_DATE,
C.COMMENTS,
C.USER_DEFINED_2,
C.USER_DEFINED_3,
C.RATE_TYPE,
C.PCPAA_OCCURRED,
C.PRIVACY_ON,
C.PCP_CHANGE_REASON,
C.SITE_CODE,
C.SEQ_SITE_ADDRESS_ID);
commit_cnt := commit_cnt + 1;
if (commit_cnt = 1000) then
dbms_output.put_line('Committed updates for 1000 records.');
commit;
commit_cnt := 0;
end if;
end loop;
commit;
dbms_output.put_line('Total number of MEMBER_ELIG_HISTROY records inserted : ' ||
rec_cnt);
exception
when others then
raise_application_error(-20001,
'An error was encountered - ' || sqlcode ||
' -error- ' || sqlerrm);
end;user10305724 wrote:
I have tried both the Case statement and Decode function in Select cursor, but both the things are not working. Please define what you mean by not working even if your computer screen is near the internet we can't see it.
You should also look at the FAQ about how to ask a question
SQL and PL/SQL FAQ
Particularly *9) Formatting with {noformat}{noformat} Tags* and posting your version.
know the reason why decode is not working, I heard some where Case statement do not work with 8i.
Does this mean you are using 8i? Then scalar sub queries - selects within the select list, are not supported, along with CASE in PL/SQL.
Select DECODE(1,
* (Select 1
from hsd_prov_contract R
where R.seq_prov_id = PM.seq_prov_id
and R.line_of_business = H.line_of_business
and R.PCP_FLAG = 'Y'
and R.participation_flag = 'P'
and SYSDATE between R.EFFECTIVE_DATE AND
NVL(R.TERM_DATE,
TO_DATE('31-DEC-9999', 'DD-MON-YYYY')))*,
'Y',
'N') PAR_FLAG,
>
exception
when others then
raise_application_error(-20001,
'An error was encountered - ' || sqlcode ||
' -error- ' || sqlerrm);
http://tkyte.blogspot.com/2008/01/why-do-people-do-this.html -
"Validation" enabled for the composite and my testsuites are not working
I have posted the below issue in Test suite in JDEV - Studio Edition Version 11.1.1.2.0 But I felt that this is the right forum, so posting this again here:
I have mediator calling bpel. Mediator is exposed as web service. Whenever I run the service using "Test" button on EM with validation turned on
then it works and the process will be completed.
But I have initiate xml in the test suites. I select "UnitTests" and select my test case xml that was associated to "Initiate Message for operation",
I see that the process is still in the "Running" state. I put in exactly the same values as I use for testing the service from EM.
Did anybody face this issue? This happens only when we turn the validation to "Enabled" in EM.
I have "Validation" enabled for the composite and my testsuites are not working. When I test using unit tests, I am only seeing "Running" status of the processes and these are not getting completed.Hello there, RevDebMN.
The following Knowledge Base article is always a great fallback article for troubleshooting Mail issues:
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/ts3276
Particularly useful, in your case:
Mail Connection Doctor shows one or more red dots () in the account Status column
Check your Incoming IMAP or POP and Outgoing SMTP email account settings
Use Apple's online Mail Setup Assistant to discover what the correct settings should be for both your Incoming (IMAP or POP) and Outgoing SMTP email servers. If your email service provider is not listed in the Mail Setup Assistant, visit your email service provider's website or contact their support staff to get the correct settings. You can use this "cheat sheet" when asking your email service provider about the settings you need.
After you have the correct email service provider settings, make sure Mail is configured properly.
Click here if your Incoming and Outgoing email account settings are correct, but the issue persists
What alert message is shown in the Mail Connection Doctor "Details" column affected account?
Click here if a "Could not connect to this (server type) server…" message appears
Click here if a "Trying to log in to this (email server provider name) account failed…" message or any other error message appears
If the issue persists, then you'll want to remove the account and then add it again using this article:
Mail (Mountain Lion): Remove accounts
http://support.apple.com/kb/PH11794
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
Online audio and video files are not working
i got a plugin for shockwave flash(adobe flash player) i thought it is the latest version so i downloaded it and installed it. Before installing the new flash player i was able hear song online and can watch videos but now both audio and videos are not working.
thanx for your advise but i got to hav one more problem and that is...i have downloaded the new version setup of firefox but after extracting it stops working and the installation process ends automatically...so please help.
the file that i downloaded had the "Firefox Setup Stub 23.0.1" -
Bought iPhone 5. Really disappointed. Within 2 days, alert sounds and typing sounds are not working. Camera is terrible. My old HTC One S was far superior!
First, no, it is not showing orange. I checked the silent button immediately. Then I checked the sounds section of my settings, but all is good there. When I get a phone call, it rings fine. Alert and typing sounds are not working.
Second..., yes this was a technical point (in which I was hoping someone else might have had the same problem, with a solution), as well as a complaint (definitely one worth making as it is not a minor issue - it is important to hear text alerts when you have children). -
keyboard letters q,w,e,r,u,i,o,p are not working in a hp pavillion when I type those letters nothig happen
Hi
Which operating system?
Exact model name, model number?
Try this --
UNINSTALL Keyboard PS/2 device driver from Device Manager - Control Panel, right click the device.
Wait for it to uninstall,
Shut down the notebook
unplug the AC Adapter
Disconnect all the external peripheral devices
then remove the battery
Hold down the Power button for 30 seconds
Re-insert the battery and plug in the AC Adapter
Tap away at the esc key with USB keyboard as you start the notebook to see if this will launch the Start-up Menu
then select F10 to enter the bios menu
Press F5 to load the defaults ( this is sometimes F9, but the menu at the bottom will show the correct key )
use the arrow keys ( assuming they work in this menu ) to select 'Yes' and hit enter
Press F10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
Restart the system, wait for Windows to loaf completely & check the keyboard.
Regards,
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP** -
Hello my battery power has a x on it and the lights are not working and its making a noise - Please assist
The Battery icon with the "X" indicates that your computer does not detect a battery and is operating on electrical power from AC since your computer is plugged in. If your battery is installed but not detected that indicates a problem: 1. the battery is dead; 2. the battery connector is not functioning properly. You mention that there is no response from the indicator lights so it could be either of the two possibilities. The noise is not a good sign. Best to shut it down safely while you can to prevent any possibility of damage and get it to an Apple Genius Bar or Authorized Apple Service Provider to discover the nature of the problem
Maybe you are looking for
-
Is it possible to mail the data in excel format in data tabs?
Hi all, I need a few clarification . We all know report data can be mailed in excel format. But my excel is having 4 tabs of data. Is that can also be mailed if so can you please guide... Regards sas
-
Can't execute web app from NetBeans 3.6 with Sun Java App Server 8
Hi there, I'm tyring to execute a java web application called myfirstjsp. In directory ...\myfirstsjp I've got: - index.jsp - WEB-INF dir - META-INF dir. I can run myfirstjsp from NetBeans if I choose the Netbeans default server, Tomcat 5.0.19 (this
-
ITunes wont recognise any of my devices
Whenever i plug my iPhone 4s or iPad2 into the USB and connect it to my iMAc, the iMac won't recognise it. Nothing at all happens - it will only charge. Usually iTunes or iPhoto will open up and recognise my device, but not now. I am running the late
-
Issues with Denim update; Lumia 822
Good Day, I have installed the newly available Denim update for my Lumia 822. But not without some glitches. If anyone can help me out, I'd sure appreciate it! Problems (by #): 1. The pictures/photos tile no longer works. It just bounces back to that
-
How to use SVM metadevices with cluster - sync metadb between cluster nodes
Hi guys, I feel like I've searched the whole internet regarding that matter but found nothing - so hopefully someone here can help me?!?!? <b>Situation:</b> I have a running server with Sol10 U2. SAN storage is attached to the server but without any