Woke up and TC will not power on.

Yesterday my TC was working great. It updated its firmware sometime in the afternoon. This morning I woke up and it will not power on. Ive tried different power outlets and cords. Is there anyway to fix this, or is my TC completely dead? Could the new firmware be what killed my TC?

The new firmware may not have helped but wasn't what killed it.. it was the poor design that killed it, although in your case 4-5years of steady operation is well beyond the lifespan of most domestic network equipment now.
The power supply is dead.. it is probably not worth fixing unless you have DIY skills..
$4 worth of caps need replacement.. but it is not a job for the weak of heart.. and I mean that literally.
https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repair/apple-time-capsule-repair-type2

Similar Messages

  • HT4061 I cannot switch my IPAD on and it will not power up - i had this problem before and cannot remember how we fixed it?

    Can anyone help us please?
    I cannot switch my IPAD on and it will not power up - i had this problem before and cannot remember how we fixed it?

    Press and hold both the home button and lock button until the apple logo shows up.

  • MBP will not start up. was working fine and shut down and put to charge and now will not power back up. Screen will light up and then power shuts back down. Any thoughts?

    MBp will not start up. Was woking fine and shut down and put to charge and now will not power back up. Screen will light up but then powers shuts back down. Any thoughts???

    Follow these documents.
    http://support.apple.com/kb/TS2570
    http://support.apple.com/kb/TS1440
    http://support.apple.com/kb/HT1455
    http://support.apple.com/kb/ht3964
    http://support.apple.com/kb/HT1379
    http://support.apple.com/kb/ht1379
    http://support.apple.com/kb/HT1509

  • HT1414 Anybody have an ipad that will not power on, for no reason? My ipad always worked fine and then one day it shut down because the battery was low so I plugged it in and it will not power on. Tryed the hard reset option still no power on :(

    Anybody have an ipad that will not power on, for no reason? My ipad always worked fine and then one day it shut down because the battery was low so I plugged it in and it will not power on. Tryed the hard reset option still no power on

    You can try recovery mode to see if you can revive the iPad.
    http://support.apple.com/kb/ht4097
    Have you left the iPad charging for a couple of hours or so to be sure?

  • TS3274 it still had about 60% battery and still will not power on

    My IPAD 2 will not power on at all, I have tried to connect it to my computer, still nothing.
    I also plugged it up for awhile, still nothing.. It was working fine eariler this morning and about 8 hrs later
    when I went to turn it on nothin (dead)

    Try holding the home and on/off buttons together for at least 6 or 7 (perhaps 10 or 15) seconds.

  • Computer doesn't recoginize iPod nano 7th Generation and it will not power on

    My iPod Nano 7th Generation was working I plug it inot the computer and computer would not recoginize it and now it will not power up.

    Try:
    - Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • My iphone broke in an outterbox case and no will not power on

    hi my iphone broke in an outterbox case and now will not turn on and now i have no phone

    Take it to the Apple store - they can answer all your questions, including the  price.

  • I cannot get my phone to update or restore and it will not power on

    My phone went to do an update - it took 4 hours.  It now will not update, restore or power on and my computer does not recognise the details of the iphone on itunes. Help!!!

    The iPhone is not legitimately available for sale in Oman. If you believe it needs to be serviced or replaced, you will have to take it back to the country where it was originally sold.
    The problem you describe does not sound like ha hardware issue. You may want to try restoring the phone using iTunes first and see if it clears up the problem.

  • TS1702 My itouch ipod screen is white and it will not power down or respond. What can I do?

    My Screen is white and does not power down.  If I connect to the computer and open itunes I can see all the contents on the computer. But I am not sure what to do at this point.

    Take it to the Apple store because that thing is broken.

  • PXIE-1065 Chassis makes clicking sound and will not power up.

    Came in from the weekend to my few week old PXIe-1065 chassis making a clicking sound near the ac power cord and it will not power on. I removed all the cards from the chassis and it stops clicking, but as soon as I replace the controller (PXIe-8133) it starts clicking again. Is this an ac power supply failure in the chassis. I also noticed there was no filter elements over the fans in the rear of the chassis like my smaller (PXIe-1082) chassis. Could this have led to the failure?
    -Jeremy

    Hi uyt,
    There are a few troubleshooting steps to take here that might show where the problem lies. Have you tried any other embedded controllers in the control slot of this chassis? Do they show the same behavior? Have you tried that controller in your other chassis? Depending on which one the issue follows, I would be inclined to guess that part is damaged in some way and needs to be RMAed.
    In response to your suspicion: I would be extremely surprised if you were delivered a part without a physical component and many of our newer chassis do not have the fan filter you are referring to, so that is likely not the issue.
    Feel free to call in to our support line at 866-275-6964 to troubleshoot the system with one of our engineers before RMAing the device.
    Ben R.
    Modular Instruments Product Marketing Engineer
    National Instruments

  • External hard drive will not power on

    I have a PH3200U-1E3S and it will not power up, every other push of the power button the light flashes once. I dont know what to do, any suggestions? The unit is not very old and it has all off our pictures on it.
    please help,
    Thanks Tony

    If it is out of warranty, you might try opening it up and looking for a fuse inside. If you find one and it is blown, you should easily be able to find a replacement.

  • T60 will not power up (battery status led green, power status led green)

    Ok so I have been researching this for a couple days now. Trying various things............
    Including the famous 10 second power button press discharge.........
    Symptoms:
    1st Disclaimer - coffee was exploded all over the laptop but has been running for a month.
    Symptoms:
    It has been working post coffee spill (several weeks ago) as long as you left it running. I get cocky and turn it off then it wont come back on.
    The laptop has exhibited the inability to power on since but I have been able to get it  to turn on several times since.
    green power light comes on with AC adapter only
    plug battery in and the battery light goes green
    press the power button - both lights go out
    I replaced the keyboard, battery, tested for 20 Volts on the AC adapter, tested for 2-3 volts on the CMOS battery.
    I tried testing for 20 volts on the motherboard where the power supply cable connects. I have most of the laptop broke down still.
    I did get it running again last night as a result of me incorrectly using the multimeter and short circuiting the power supply connector .
    It booted up and ran fine and I even tried turning it off and on again several times.
    I thought it might be a heat issue. I turned it off and tried to turn it on this morning and it will not power up.
    Same symptoms as before.
    no battery, only power connected, green light comes on, plug in the battery, battery light goes green, try to turn it on and the lights go out.
    It seems like it is fixable but I am not sure what to look for next.
    Or should I be looking for another system board...........if so what should I replace it with
    This is an IBM T60 Type 2613 15" screen.
    Solved!
    Go to Solution.

    Welcome to the forum!
    Your best bet would indeed be a new system board. Any single one from a non-widescreen T60/p will work.
    I've got dozens of them available - send me a PM if you're interested.
    Good luck.
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • IMAC will not power up

    I just purchased an iMAC, unpacked it, set it up, plugged it in and it will not power up

    If it is new, contact Apple immediately.

  • HT3546 my airport will not power on, what are the possible causes?

    My Airport just shut off and it will not power on. I unplug it from the wall and pulg it back into the power outlet but it still won't power on. What are the possible causes. Is this system just died out, I have it for about 3 years.

    Causes....a failed electical power supply component or an internal connection that has come loose.
    It's a real longshot, but if you are handy with small tools, carefully saw open the case of the Express along the center seam to open up the case and look for something obvious.
    Your chances of success here are very very small, but if you have the time and inclination, it won't hurt to try.

  • Pixma pro 100 will not power up

    My Pixma pro100 is 13 months old and suddenly will not power up. There are no unusual circumstances. Push the power button, & nothing!!! I've seen others that removed the power supply and re-installed as a fix, but that did nothing. Any other suggestions out there? The prints are absolutely beautiful, but to last only 13 months of light use is unacceptable. Please let me know if you have any suggestions, thanks!!

    Thanks Patrick!   Initial Call to Support (Sunday June 21, 2015) I initially called Technical Support on a weekend (Sunday 6/21/2015) and the technician logged onto my PC remotely, dug into system logs, and told me the problem was with my PC.  His diagnosis and matter-of-fact attitude was the issue was with my PC and that my only recourse was to replace the printer.  I kept telling him that the printer would not power on, even after changing the power cable with my other Canon printer, but he stuck to his diagnosis,  the issue was with my desktop.  I told him i had only used the printer occasionally printed about 30 13 x 9 prints but I had never had any issues. Fast forward to this week (Thursday July 23, 2015) I called during the M-F normal support hours, got a US based person who was the greatest and told me they would replace the printer even though it was out of warranty by about 3 months, it was still within the grace period.  She has restored my faith in Canon Support and I learned an extremely important and valuable lesson;  call during normal business hours and receive a US-based support person! Thanks Canon and kudos to my USA based support person this week!  

Maybe you are looking for

  • IPod No Longer Works In iHomes H5

    Since I updated to the latest version of iTunes, my iPod doesn't work in my iHomes H5. I've tried three H5s, and it doesn't work in any. However, my wife's nano works fine in our H5. Also, I've taken my iPod to two different electronics stores for di

  • Calling CVI DLL Function from Visual Studio

    HI all , Iv'e created a DLL using CVI and i'm tring to call one of it's function from visual studio 6.0 I'm getting a general error , is there a specific prototype that i need to set my functions in ordrer to call them ?!   Kobi Kalif Software Engine

  • E51 - problem sync log with parrot carkit

    Hello, I just bought a Nokia E51 and I have a problem. It does not sync the dialled, answered, missed calls with my parrot carkit. I did not have this problem on the 6267. Why? What can I do? P.S. : BT SIM at distance is on and still having problem.

  • Letter bugs on iPad mini iOS 8

    Very recently iOS new version was installed but still showing letter bugs after criticism made for some Japanese site bugs. I use Kasperskey browser recently because kasperskey collect information who approach to the browser. Scare off the hackers. H

  • Having Issues with Macbook to turn on

    In the morning, I have issues getting the Macbook to turn on. If i put the puter in sleep mode the next morning and open, it does not come on, even if I hit "on" button. Only way to get it to turn on is to remove power cord. Does my setting need to b