Won't accept password after equipment swap

Hello - My 1TB Time Capsule blew it's WAN port.  Before taking it back to Apple I backed up the config.  Apple replaced the device and I took it home and imported the config file and everything came up fine.  Except, Time Machine won't work.  I went through the normal setup (even though nothing changed) and selected the disk and entered my password.  When it goes to do a back up though, it says my password doesn't match.  I know it's right but as a just in case, I went back to the TimeCapsule and re-entered my password.  Then I went back to TimeMachine and it still gives me the wrong password error.  So, right now, every time it goes to backup, I get a failure note due to password.
Anyone have a tip here? 

Hi there. New user. My two small children were trying to access my computer and now my password does not work. All these messages started to come up including Mail wants to use the login keychain; PubSubAgent...Dotmacsyncclient... They keep popping up and my old password won't work. It also seems to be interupting my email sending as well. It asks repeadily for my email account passwords (they work though) Help! I work from home and am really nervous about these problems. Thanks so much!

Similar Messages

  • Won't accept password after leopard install

    I just upgraded my iMac OS10.2.8 to Leopard and all went well until the restart. I normally have auto login since I'm the only user but now the password login pops up and it won't accept any of the passwords I enter. Help!

    Hi there. New user. My two small children were trying to access my computer and now my password does not work. All these messages started to come up including Mail wants to use the login keychain; PubSubAgent...Dotmacsyncclient... They keep popping up and my old password won't work. It also seems to be interupting my email sending as well. It asks repeadily for my email account passwords (they work though) Help! I work from home and am really nervous about these problems. Thanks so much!

  • IMac won't accept password after time machine restore

    Restored 2009 IMac after an HD replacement by Apple. All proceeded smoothly until IMac wouldn't accept my password after the restore from Time Machine. Any ideas will be appreciated.

    One thing to try, if you didn't already do this, is to reinstall OS X and use Setup Assistant (which is only available at first boot of a new HD or a reinstalled OS) to migrate your data. A full Time Machine restoration on a new HD can have file permissions problems and/or duplicate User Account problems if Setup Assistant is not used.

  • Won't accept password after updating software

    I recently purchased a McBook Air. It is set up so I don't have to enter my password
    everytime I open it up.  Today I got notice of a software update for Lion which I downloaded.
    Since then I get asked for my password, but it isn't accepting it.  It gives the hint for the
    password and I know I'm entering it correctly but nothing is happening.  What do I do now?

    Hi there. New user. My two small children were trying to access my computer and now my password does not work. All these messages started to come up including Mail wants to use the login keychain; PubSubAgent...Dotmacsyncclient... They keep popping up and my old password won't work. It also seems to be interupting my email sending as well. It asks repeadily for my email account passwords (they work though) Help! I work from home and am really nervous about these problems. Thanks so much!

  • Lion Server Won't Accept Password After New Motherboard Installed

    We got a mac mini with Lion Server installed on it. The motherboard went bad so we took it back, and they put in the new motherboard. We couldn't log into the computer after that for some reason so we reinstalled it using the Time Machine backup we had (running from the other drive). Then we were able to log in using our admin password. Now the connecct to server won't work, even though we're trying to connect to ourselves, which should us the admin password. We deleted all the keychain passwords but to no avail.
    Thoughts?

    We had to reinstall the software (using cmd-r when booting up) and then reload everything. That fixed it.

  • Powerbook won't accept password after OS upgrade

    My G4 powerbook hard drive started going bad, so I had the local Apple store put in a new one and upgrade the OS at the same time. The store did the data recovery.
    When I now try to connect to my home wireless network, the computer recognizes the access point and asks for the password. When I try to enter the password, I get an error that indicates I am not typing in the correct password. Password has NOT changed since the access point was created. The password was previously stored on the computer, but all stored passwords were lost when the data was restored to the new hard drive.
    Any suggestions?
    Thanks!

    If this wireless access point you are trying to connect to is yours, then I would go into the router and reset the password or change is. You can also perform a hard reset on the router so that you can connect to the network.
    -Internet Wiz

  • Can't get email address for printer won't accept password

    Went to eprint center to register printer, worked fine,but when we tried to give printer email address so we can email to printer from remote locations won't accept password no matter what itry
    This question was solved.
    View Solution.

    MasterBinker, have you tried using the Forgot Password link in the sign in page for ePrintCenter?  This should send a new password to the email address.
    You may also want to try using a different web browser.
    Regards,
    Sean
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • Just purchased iMac, however I can't log on because it won't accept password I enter

    Just purchased iMac, however I can't log on because it won't accept password I enter

    cindybroder wrote:
    Just purchased iMac,...
    New or Used..?
    If New... return to Place of Purchase.
    If Used... Contact the Seller...
    As this should have been done
    Apple What to do before selling or giving away your Mac
    http://support.apple.com/kb/HT5189?viewlocale=en_US&locale=en_US
    before it was Sold.

  • Won't accept password when waking from sleep.

    a client of mine is having an issue where her mac won't accept her password after waking from sleep.  The same password works when she restarts.  She has confirmed that caps lock is off.  Any Ideas?
    I left her a message trying to find out more details about her computer like OS version and stuff.  Will update this when i hear from her.

    She still hasn't returned my call, but i know that she is able to type.  Whether its wifi keyboard or not I do not know.

  • Wifi won't accept password

    IPhone connects to home wifi easily; iPad suddenly won't - no changes were made from yesterday, so..?  Already tried hard reboot on iPad, unplugging wifi box from power source, set to WPA, putting in name of network/password - all over and over.  No wifi connection.  Then changed home wifi channel back to 6.  Did all previous steps again, still no go.  Name of home wifi shows up every time on iPad..but when it asks for password, it won't accept it to make a connection.  iPhone still connects and stays connected easily.  Infuriating, Apple.  (newer retina iPad)

    My ipad and iphone suddenly stopped recognizing wifi password after returning from holiday.
    This worked for me:
    Settings>Wifi>click on your Network >click on right arrow to right of name>Forget this network>Forget> click back to settings>wifi.
    Your network name should still be there. Click on it and re-enter your password. Bingo!

  • Windows 8 Won't Accept Password

    Bought new Windows 8 computer. I didn't like it, so gave it to my husband who reset with his user account and password. After working perfectly fine, all of the sudden wouldn't accept password. Although KNEW the password, went through process to reset Microsoft
    password. Nothing. More reading. Started in Safe Mode (after LOTS more reading). Nothing. After lots and lots and lots of more reading, finally was able to use the command prompt feature and create a new password. It worked! Turned machine on and off several
    times to make sure password was fine.
    All okay until let daughter use the computer. After successfully using the computer and password several times, she turned it on, typed in the password when requested and it wouldn't accept it. She called us to verify password she was using was correct.
    It was. Finally, after about the 4th-5th attempt, it accepted the password.
    What is happening and why? What can we do to keep this from happening again?
    We don't have a back-up disc, and obviously, many "fixes" cannot be used because we can't log-in to the machine to use them. This is really frustrating and certainly makes us wish we had spent more money and purchased a machine with "a different
    operating system."
    Thank you.

    Hi,
    For this problem, it's hard to verify why this thing happen. Gererally speaking, it can be caused by User Profile crash. The workaround method is belows:
    Use SFC /scannow command to fix system file.
    Create a new account for test.
    Yolanda
    TechNet Community Support

  • New iPhone6 won't accept password

    Just delivered. Backed up old 5s to iCloud. No problem.
    But when I want set up new iPhone using iCloud, it won't accept my password.
    I'd call support but new phone's serial number not available.

    Thanks, but weirdly, it wasn't!
    But when I went online again, the apple site suddenly knew about my phone and showed me my serial number (probably because I bought applecare)

  • GMail won't accept password using Mac Mail

    I set up my POP access according to Gmail's directions, and can log
    onto the account fine on the web but it won't accept my password using
    Mac Mail. Anyone dealt with this before? Please let me know. Thanks.
    MacBookPro   Mac OS X (10.4.8)  

    Please disregard, I've figured out the problem. In case it could help someone else, when asked for the User Name, you have to include the "@gmail.com" where with Apple Mail, you don't have to.
      Mac OS X (10.3.6)  

  • Mail won't sync with my .mac account - won't accept password

    I have a MacBook running the OS X 10.6.8.  Recently I have found that I cannot sync my Mail with my .mac account.  I can log on through the internet to iCloud and read emails (I know my password is valid), but when I try to get them synced to my Mail account it won't accept the password.  It looks like this may be a conflict with Mail not being updated to iCloud, but I am unsure.  I have not found an update that will update the Mail to link with iCloud.  My computer is also not new enough to update to the new Lion OS.  Am I stuck?  This has been very discouraging and I have been wasting hours of valuable time trying to figure out how to fix this.

    Did you turn on iCloud Drive by any chance? If so, then until Yosemite comes out, you won't be able to sync your documents and data to your Mac:
    iCloud Drive FAQ
    Sorry...
    GB

  • HELP .. mail 3.2 won't accept password

    I have several email accounts that have been working until today.
    One of the accounts will not allow me to check email. It keeps asking for the password and then it won't accept it.
    I have tried going into preferences/accounts to re-enter the password and it still won't work.
    Nothing has changed and all the other accounts are working fine.
    I even went into keychain and deleted the account file and it will not accept the password.
    Please help me .. I need to check my mail.
    Chuck

    I suggest running Keychain First Aid on your login keychain via Keychain Access.
    Have you tried logging in to this account via webmail access using a browser to confirm you are able to login and access the account with this password separate from the Mail.app?

Maybe you are looking for

  • Issue with XSLT

    Hi All, I am working on a requirement to write an XSLT file which will do the following: 1. Copy contents from Input.xml to Output.xml 2. Read another xml file named Map.xml, select the value of printImmediate corresponding to Report Name and Version

  • How to determine the destination port from a audit fail event

    I have a bunch of audit failure events (4625) in our security log. The details only show the source address and port but no destination port info.. Is there anyway I can find out that info.? What I really want to know is what application\port does th

  • Redirecting from a JSP to an XML file

    I have an issue that I urgently need to sort out. I'm running a web application which uses EJB's for the back-end and JSP's for the front-end. I have a class that generates an xml file on the system containing client information. I create a String Ob

  • ICloud Mail Sent with iPad Not Appearing in Sent Mail

    Hi Everyone, For for the past few days, the email messages that I've sent with my iPad using my iCloud address do not appear in the iCloud Sent mail folder my iMac. But if I send an iCloud mail using my iMac, it does appear in the iCloud Sent mail fo

  • Performance Management - Appraisal details

    Hi there we are trying to Find where the comments are sourced from in the Objectives > Description Tab > Comments (Success Criteria) when viewing them through the appraisals Details Icon (N) EMP SS > Talent Management > Plan > Appraisal (Details Icon