Won't accept registration key..... Win XP Pro sp2

I've uninstalled and reinstalled Quicktime and it still won't accept the registration key I just purchased.
any ideas
Custom   Windows XP Pro   SP2

First, make sure you purchased a QuickTime Pro key for Windows, not for Macintosh. The two keys are not cross-transferrable. If you got the correct key, make sure you're entering in both the user name and key code exactly as in the email Apple sent you. Any error in either, including leaving off a salutation (for instance, if the email says "Mr. John Smith") will cause the registration to error.

Similar Messages

  • Problem installing Win XP Pro SP2 on 2008 Mac Pro running 10.6.8

    Okay, I have never setup or ran a bootcamp partition so I apologize in advance for my ignorance on the subject. I have been attempting to install win xp pro (SP2). I am using the Boot Camp Assistant  v3.0.4. I have created a 32GB FAT32 partition and at the point I click Continue Installation (with the XP Pro disc in the drive) the computer reboots to supposedly install.
    What happens instead is I get a revolving censorship/ban circle icon, folder with question mark and apple logo. It just continuously will flash between those 3 icons until I restart.
    Here's what I've tried...
    -removing all other drives. I'm attempting to install on the boot drive which is in bay 1.
    -removed all external devices only things plugged in are my usb keyboard and DVI monitor
    -deleting and recreating the partition
    -I have the xp pro cd in the top drive and the snow leopard cd in the bottom drive (both internal cd/dvd drives)
    Computer:
      Model Name:          Mac Pro
      Model Identifier:          MacPro2,1
      Processor Name:          Quad-Core Intel Xeon
      Processor Speed:          3 GHz
      Number Of Processors:          2
      Total Number Of Cores:          8
      L2 Cache (per processor):          8 MB
      Memory:          10 GB
      Bus Speed:          1.33 GHz
      Boot ROM Version:          MP21.007F.B06
      SMC Version (system):          1.15f3
    No matter what I try I am met with the same results. I have held down the option key and manually selected the windows xp cd. It seems to be booting but immediately turns off my DVI monitor which, well, makes it impossible for me to actually know what is happening. I do have a nvidia GeForce 8800 which only has two DVI ports off the back. I do have the adapter and an old VGA monitor I could pull out of the attic but would rather not unless that is my only option. Can someone in the community please point me in the right direction?
    Many, many, many thanks!
    Curtis
    OKC, OK

    Update: my problem was solved by getting my VGA monitor out of the attic. Once windows was done and I ran the setup.exe off the Snow Leopard CD, all of the drivers were updated to allow me to switch back over to my apple cinema display.
    Also, I did need to hold down the option key to select the windows CD to install...and again to select the windows partition to boot but so far everything is going well with Bootcamp 3.0.4 and XP SP2...other than it is windows.
    -Curtis

  • WRT350N + WMP300N = BSOD Crash on Win XP Pro SP2?

    Yes, the problem I am having is that with WRT350N + Wireless + WMP300N = BSOD Crash on Win XP Pro SP2.   Really, from what I can tell, WRT350N + Wireless = BSOD Crash on Win XP Pro SP2.   Yes, I know, a router shouldn't be able to crash a computer, PC drivers, PC misconfigurations do.
    However, my crashes didn't start happening until I switched to my WRT350N wireless router.  Actually, at that time I didn't even have the linksys WMP300N ... it was another wireless card.  Now I have the linksys WMP300N, and the crashes still happen.
    I updated my driver on my NIC to the latest version two days ago, and at the same time upgraded the firmware on the router to the latest and greatest.  You know what that did?  Instead of crashing my PC once every day or so I get crashes about 5 mins after I start my PC.
    I've tried using the linksys wireless configuration utility, and the Windows zero configuration, still crashes.  I've tried Wireless Mixed bode, BG mixed, G only, still crashes.   Different channels, still crashes.   I disabled Symantec Client Security firewall, still crashes.  Uninstalled SCS and used windows firewall, still crashes.   Disabled netbios and dynamic DNS registration on my adapter, still crashes.   Disabled wireless QoS on PC and router, still crashes.  Tried disabling and enabling (individually) Wireless AP isolation, frame burst, CTS Protection mode,  forced 54mbps rate ... still crashes.  I have no HD attached to the router.  I've disabled UPnP on the router, still crashes.
    You know what does fix the crashes?  Disabling my wireless adapter.  You know what else fixes the crashes?   Connecting to a different wireless router.
    I'm completely baffled.  Any ideas what I can try?  I'm an IT Consultant by trade, and have been working with PCs and networking in a professional capacity for over 8 years, so I have a decent amount of troubleshooting experience.   The BSOD doesn't say much, just equates to a hardware/driver fault ... but no indication what.   My crash dump analysis (full, not just minidump) also provides no data as to what driver).
    Thoughts?  As much as I hated my former Netgear, I'm about ready to even go back to that....
    Edit:  My PC is using DHCP, configured as a reserved address.
    Message Edited by TroyL on 02-20-2008 07:08 AM

    Hello, hopefully I can help you. Some things that resolved my issue were disabling some options in the advanced properties of my NIC (WMP300N) Even if you don't have the same NIC, you should probably have some similar options:
    -Manage Wireless Settings = Disabled (note: I disabled this since I'm using Windows to manage the settings)
    -Mixed Cell Support = Disabled
    -Minimum Power Consumption = Disabled
    -Power Save Mode = Disabled
    -Wake Up Capabilities = None
    -Bluetooth Collaboration = Disabled
    -40MHz Intolerant = Disabled
    Try disabling those things, and go from there ... good luck . With those settings, I haven't crashed in several months now. I don't know which setting it was fixed it, I haven't been brave enough to go playing with it again ... if it ain't broke, don't fix it, lol.

  • PC54G and MP54G2 in Win XP Pro SP2

    Hello, and thank you for reading my thread.
    I've got a MSI Mega 180 with a integrated MP54G2. In can see the Ethernet-Card in the "Device Manager", but it won't work. I've tried with the driver that comes along with the original package, and the newest that MSI offers on the web-sites. The files that can be downloaded, seems to be se same for PC54G and MP54G2; "MSI_WLAN_Software4.1.16.26.zip". I can't get this driver to work for the MP54G2 nor the PC54G. The reason why I'm talking about the PC54G is that I had that card from another PC, but the result when I install it into the Barebone is the same. Is there a known problem with this driver in SP2?
    - Eirik

    I tried it on a P4 3.2 ghz, ATI Radeon 9600 128 megs, Gigabyte Motherboard (don't remember wich one), over 256 megs DDR, 160 gigs hdd.  The second one was a Athlon XP 2200+, Ati Radeon 9250 128 megs, Gigabyte Motherboard GA-7VKMP, 80 gigs hdd, 512 megs DDR.  The third one is a P3 866, Ati rage Pro, Intel motherboard, 384 megs SDram, 40 gigs hdd.  They're all new installed win xp pro SP2 computers (after updates everywhere ex:graphic cards, windows etc...)  Really confused !!!  Tried in different PCI slots.  Do you think it's a card or chips (physically) problem, at your advice ?  I'm not at my first computer installation, and it's the first time I see this problem.  I'm in computers since 6 years and never seen that before.  Help me please...........

  • URGENT Cannot install Ora9i rel 2 Client on Win XP Pro SP2

    Hi folks:
    I have a problem installing Oracle 9i in a "clean" machine with Win XP Pro SP2 with .NET 1.1 running on a P4@3GHz and 512MBytes of RAM and 30GBytes of HD free, when I start de UOI only appear de Oracle's splash screen and when I select install/Deinstall products, nothing happens (in the administrator task appear not response and close automatically).
    I read a lot of solutions about this here, always the same result, NOTHING.
    - I rename symcjit.dll to symcjit.old (of course i copied the installation CD at the oracle subdirectory to avoid long directory paths)
    - Install a JDK 1.3 and 1.4 (and deinstall them after and clean the registry)
    - I login on windows with a user name without rare characters.
    After trying all above and more that I've forgotten I try install a older version (8.1.7) but appear this message.
    "There was a problem opening the staging area. Please make sure the 'Source' you have specified is valid"
    of course the source is valid (products.jar) and I edited the oraparam.ini file to change the relative paths to absolute, but the same message appear.
    ¿I'm doing something wrong?¿incompatibilites between Oracle and Windows?
    Thanks for any help, I need to resolve this problem ASAP!

    Could it be a firewall blocking a port that Oracle needs?
    Service Pack 2 for Microsoft Windows XP turns on the firewall by default.
    Unless, there is a conflict somewhere with the installation program and what you already have installed. Such as, do you have a version of some Oracle software already installed?
    Could it be a conflict with the Java runtime? The Oracle Universal Installer uses its own Java VM.
    Have you tried downloading the latest client software for Oracle 9.2 and trying that?

  • [TV@Plus] Can't install drivers in win XP pro sp2

    I can't install the drivers of that tv@nywhere plus.  I tried it on different computers = same results.  Tried the msi driver on web site = same results.  I have the following message " The tv@nywhere WDM Driver Installation Failed ".  Is it the card or what ?  Sent an email to MSI = no answer.  Do I have to return it and buy a better card (not from MSI)....Tried in 4 different computers....HELP ME SOMEONE !!!

    I tried it on a P4 3.2 ghz, ATI Radeon 9600 128 megs, Gigabyte Motherboard (don't remember wich one), over 256 megs DDR, 160 gigs hdd.  The second one was a Athlon XP 2200+, Ati Radeon 9250 128 megs, Gigabyte Motherboard GA-7VKMP, 80 gigs hdd, 512 megs DDR.  The third one is a P3 866, Ati rage Pro, Intel motherboard, 384 megs SDram, 40 gigs hdd.  They're all new installed win xp pro SP2 computers (after updates everywhere ex:graphic cards, windows etc...)  Really confused !!!  Tried in different PCI slots.  Do you think it's a card or chips (physically) problem, at your advice ?  I'm not at my first computer installation, and it's the first time I see this problem.  I'm in computers since 6 years and never seen that before.  Help me please...........

  • Qosmio F20-141 - Cannot start Win XP PRO SP2 installation.

    Cannot start Win XP PRO SP2 installation.
    After choose "start from CD" i can see for a little time only starting message ~"Starting Wisdows XP installation" (little white letters on top of black screen)
    After this computer hungs in black screen.
    QOSMIO F20-141 for Russian Federation
    M/N: PQF20E-02801YRU

    Hi again
    You should try to start the OS installation with Recovery CD and/or with the Windows XP CD. If this both procedures doesnt work so I assume there is something wrong with the hardware. Maybe a faulty HDD. In this case the best way to solve this issue is to contact the ASP

  • I just downloaded Adobe Acrobat won't accept Product Key

    I just downloaded Adobe Acrobat and I have a Product Key, but Adobe won't accept the number.  

    What version? Std or Pro? Where did the product key come from?

  • Activation (registration key) for QT Pro

    i got the confirmation email for my purchase of Pro... but it did not contain any 20 digit registration key..... does that come in a later email?? it has been a couple hours since purchase...
    patience or problem?
    thanks

    How long does it take to recieve the registration code, and in the email that contains it, is there anything else?, i went to the apple site, theres nothing there other then the part number and what i bought, but theres no registration key, if theres anything else i need to do please let me know

  • Can't find my registration key for quicktime pro?

    I have to go through a lot of searching in finding it under 2 accounts. It's just a lot easier getting it sent to me again rather trying to find it here where it should be easy to find, but not. It sure is not under my account history? Been like 5 or 6 years when I bought Quicktime Pro. But still should not make a difference in why it's not under account history. Can you please send me the registration code so I can have it registered on a new pc? Thanks.

    This is a user to user forum: you aren't talking to Apple here and no-one on here can help you. I assume you've checked your back emails?
    Apple's word on the subject says:
    You can retrieve purchased registration keys with these steps:
    Visit the Apple Online Store.
    Click "Account" in the upper-right corner.
    On the "Your Account" page, click "View Order History".
    Enter your Apple ID and password.
    Additional Information
    You can only retrieve a lost QuickTime Pro key if you purchased it through the Web. In most cases, the key will be identical to the key you lost.
    If you purchased your QuickTime Pro upgrade from another source, the key is not available for retrieval and you must purchase another key from The Apple Store.
    If you have already tried this and cannot find it, you can only contact the Store and ask them.

  • How long does it take to get Registration key for QT Pro?

    I've gotten 2 emails. One, confirming my apple store purchase, and the other email telling my my credit card has been charged.
    BUT, no email yet with the Registration key.
    I ordered it about 18 hours ago.
    When I check my status in my apple account, it says it was electronically delivered. But, I can't pull it up anywhere.
    Help me please!
    -dino

    Dear David,
    Thank you for your recent order.
    Although your purchase attempt was successful, a QuickTime Key was not generated.
    A credit in the amount of $29.99 is being credited to your account and should appear on your statement within five business days. Please contact your credit card company if you have questions about when the credit will be posted.
    To receive a QuickTime Pro key, please re-order the key by going to
    <http://www.apple.com/quicktime/buy> and click the link for your operating system.
    We sincerely apologize for any inconvenience this has caused you.
    Best Regards,
    Apple Store Customer Support

  • K9N6PGM2-V, Win XP Pro/SP2, USB only works at USB-1 speed

    Apologies is this is on an FAQ somewhere -- I did look, but didn't see it.  Anyway, the USB ports work fine at USB-1 speed, but not at USB 2.0 speed.  In fact,  MS XP reports that there are no USB 2.0 devices available.  Kinda frustrating, since the MSI manual specifically mentions USB 2.0 pin headers for this motherboard.
    The PC (see signature) is built from scratch.  At this point, the only software that is on it is XP Pro, SP2, and downloaded MSI drivers, and the only hardware added is the Intel Ethernet card.  I installed the full package of drivers from this web page:
    http://global.msi.eu/index.php?func=downloaddetail&type=driver&maincat_no=1&prod_no=1472
    Specifically, I downloaded the full set ("NVIDIA_MCP61_SYSTEM_MB.zip") and installed everything except "forceware network access manager.".
    One other note -- When I installed the motherboard, I connected the front panel USB connectors to the motherboard's JUSB1 connector (should I have hooked it to JUSB2?) ... however, the same behavior (USB1 speed only) happens with the built-in connectors (next to keyboard/mouse input, etc.)
    Can anyone help?  Thanks.
    Phil

    >>If you are having problems with USB ports, read this topic.<<

  • Reloaded Quick Time Won't Accept Registration Data

    Does anyone know how to go about getting Quick Time to accept the registration data for previously-purchased Pro and MP2 Playback capabilities -- reloaded on the same machine as before, after an XP SP3 "Bootlock"-induced reformat/rebuild ??
    Many thanks,
    Lee Hunt

    Excellent !!
    A thousand thanks for THIS tidbit. That's all it took to get QT Pro registered and running. The plugin, I fear, may be a horse of a different color however.
    THAT appears to have been an online install -- both from the website and from the fact that I don't have a copy of it in my library. I spent an incredibly frustrating half hour with the support [[sic]] crew who -- even WITH the Apple Part Number -- had NO idea what I was talking about and just bounced me around from one to another until they could drop me into the "we're closed now" recording.
    I wonder if anyone might know the filespec and registry settings for the plugin. Perhaps with those, I might be able to shoehorn the pig in with files recovered from the backup set rather than having to pop for a new license. I'll GREATLY appreciate any help along those lines.
    Many thanks,
    Lee Hunt

  • How do I find the registration key for Quicktime Pro 7?

    I bought QT7 in 2005 & following the links in various support documents all take me to dead ends.  If I look at order history of my account it only goes back 18 months.  There is mention of "downloadable software" section in accounts but that has gone, presumably replaced by the App Store.  I am of course running Lion & want to unlock the Pro features on my MacBook Pro.
    Many thanks

    Do you know how I can amend the link to go direct tot he UK site?
    Sorry, no. We have the same problem of "lost" links to the software purchase history here in the USA. Fortunatally, someone came across this link in the support area and it appears to work for purchases made here at the US online store. However, the article containing the link I posted also states the following:
    Outside Canada and the United States
    If you purchased a QuickTime Pro key after 13 April 2001, contact the customer service number of The Apple Store . This number is available at the bottom of The Apple Store Web page for each region.
    If you purchased a QuickTime Pro key from the QuickTime Web site before 13 April 2001, please consult your email or other records from that period for your key.
    Here is a link to the article if you wish to read it: http://support.apple.com/kb/HT2376
    Believe others have tried contacting the US Customer Service number but were told to get the information form the Downloadable Software Purchases area for their account which, as we already know, no longer works. (In fact, the Customer Service people did not seem to even know that the old links were missing form our account pages or seem concerned about looking into fixing the problem.) While I don't hold out any hopes that you will fare any better, you can give it a try and at least ask if there is a similar external URL for people in other regions. I personally would also send formal QT feedback regarding the problem.

  • Safari 6 won't accept enter key

    Hi,
    safari 6 worked fine for me until today: if I enter a term in the search/URL bar which is not an adress the enter key won't work. I press enter and nothing happens. It's different when I type a URL like "apple.com" then it will bring me to that page after hitting enter. but if I type for instance "apple mac" nothing happens after hitting enter. I already did a safe restart but the problem persists...

    It's the same for me, and it's driving me insane.
    There seems to be no place to download safari and no easy way to reinstall it. When clicking on the magnifier glass in the search bar I can click on "search history" or "search page" but clicking on "google search" won't work.

Maybe you are looking for