Won't allow multiple contacts

I am using gmail. When iuse m ipad to send email my contact called buddies will no appear. What gives

The email client on the iPad won't support contact groups - you have to type in individual email addresses.

Similar Messages

Time capsule won`t allow multiple devices to connect to the internet

I`ve got a 2TB time capsule that worked fine.
I moved to this condo where the is already a wired internet service available to each apartment. The access is made through a login and password whenever You open you browser, if connected directly on the WAN cable. No multiple logs are allowed.
When I used my Time Capsule to create a wi-fi network and serve as a router I could access the internet on my MacBook over the wi-fi just created. No problem at all. But whenever I try to log other devices (iphone, apple tv) it asks for my ap login and password, and of course it states that there`s already an active connection to that user and won`t grant me access.
I`ve then borrowed a tp-lynk router from a friend of mine, created a wi-fi network (without the time capsule on it), it asked for the log in and all but then everything worked fine and I could use all my devices through this network.
Back to the time capsule, I`ve tried different settings. First one was bridge mode, but it didn`t work. Tried DHCP & NAT but had the double NAT issue.
Also I`ve tried this solution https://www.autoitconsulting.com/site/networking/configuring-an-airport-extreme- for-nat-only-mode/
but it would`t work either.
My guess is that somehow Time Capsule is attributing different IP addresses to each device that enters the Wi-Fi network, and that`s the reason I can`t access the net, since the service provider won`t allow more than one connection. On the other hand TP-Lynk was able to connect to the internet service through one IP address and then connect to other devices.
Any idea on how to solve this issue?

Tried DHCP & NAT but had the double NAT issue.
If you got the TC working and had double NAT .. sorry but the TP-Link is exactly the same.. you cannot distribute a single IP without double NAT.. the TC tells you it is a problem.. the TP-Link doesn't.. otherwise there is no difference.
But it is important the double NAT is setup right.. ie you must use different ranges.. please tell us the IP you get from a directly connected computer..
If it is 10.x.x.x then you should move the TC to 192.168. rather than default IP of 10.0.1.1 .. the TP-Link already will use 192.168.x.x. which might also explain why it works better.

Won't allow multiple buddy video chats on my macbook pro

I have macbook pro, iChat AV 3.1.8 and I can video chat no problem but i can't start or join multiple
(3 way) video chats. So I can only ever do one to one.
What is wrong?
Help please.

Hi
Hi
First have you set the Quicktime streaming setting, goto sys prefs/quicktime/streaming/streaming speed, set to 1.5mbps(dont use automatic)
In ichats prefs click on video and change bandwidth limit to NONE.
Restart iChat.
Do a speedtest and tell us the upload and download speeds http://www.speedtest.net/
Tony

Backup IPSEC connection multiple remote Internet egress sites won't allow multiple any encryption domains

Hi Folks,
I have currently setup an ASA at a remote site in the middle of the USA which tunnels all traffic back to our West coast HQ to use its Internet connection. It works great. However, I also want to have another tunnel to our East Coast HQ to use its Internet connection should a failure occur on the West Coast. I'm bascially using the "any" remote network as a default route to the Internet via the IPSEC VPN tunnel.
The ASA gives me a warning in ASDM if I have multiple connections setup that over lap. I.E. I have Local Network: 10.0.0.1 Remote Network: any. I cannot repeat this for a different connection profile as a backup.
Is there anyway the ASA can support having multiple "any" tunnels to primary and backup sites?

Gave up and called TAC.
Its easy to setup backup peer's for IPSEC tunnels, first off, can't use IKEv2 (boo) had to go back to IKEv1, have to use keep alives.
Never could get the recommended "originate only" on the remote sites working correctly, but at "bidirectrional" worked fine, doesn't matter because I'm using a dynamic IP at the remote sites, the head ends will never initiate the VPNs (I don't have the "static IP" box checked).
Anyway, in ASDM go to Site to Site VPN section, then Advanced, create a tunnel group for each peer primary and backup. then in the Crypto Maps section select the static entry you are working with, in the Peer settings below put the new backup peer and click add.
Best practice is to have the remote sites use originate only and headends be answer only so the headends don't initiate the tunnels and cause a "loop"
Now to mess around with the EIGRP routing to finish this all off. If anyone has hints let me know, my devices don't support IP SLA or else I would have been done with this already :(

Skype won't allow new contact to be added. I am ru...

Is there a fix for this?
Chuck
Salem, Oregon

This password prompt is presented by your operating system, and is intended to keep you from accidentally installing software.
If this is your personal machine and you don't need a password to log into the computer when it first starts up, you can probably leave the password blank and click OK to get past this prompt. If this is your personal machine and your normal password isn't working, check to make sure that CAPS LOCK is off, and type the password carefully.
If this is your work machine and it's asking for an Administrator password, well, you'll need to have a conversation with your friendly IT person.

CDRW disc won't allow multiple burns

I have a 2.1 GHz iMac G5 and I am using a CD-RW disc. I am trying to burn files to the disc more than once but it says that the CD can't be modified. The disc is rewritable so why can't it rewrite? Any thoughts on this one? Thanks

To Apple Discussions!
Double check to make sure you are using a CD-RW CD.
Make sure the CD is not smudged, cracked and/or dirty.
http://docs.info.apple.com/article.html?artnum=50448 How to Handle and Clean CD and DVD Discs
Repair permissions if you have not done so already.
Your drive may need cleaning. Cleaning kits can be purchased from any store that sells CD/DVDs.
Try another CD-RW brand.
Another help source (if you haven't already done so).
Go to your OS Help Menu. In the search field type cd
Click on all the troubleshooting topics & Support Articles that pertain to your issue.
You can also do the same in Disk Utility. Open same up.
At the bottom left of the window, click on the purple button w/the "?" in the middle.
This will bring up the Help Menu.
Use the same search keyword as above.

I purchased the Adobe PDF Pack but it won't allow me to convert any files to pdf or combine multiple files to into 1 pdf form. It keeps saying "Error occurred while trying to access the file". WHY

I purchased the Adobe PDF Pack for $7.50/month (or $89.99/yr) but it won't allow me to convert any files to pdf or combine multiple files into 1 pdf form. It keeps saying "An error occurred while trying to access the service". WHY is this happening & How can I fix it?

Hi hpmg,
It seems you are trying to access the service via Adobe Reader. Make sure you are signed in with your Adobe ID. Is Reader updated to the latest patch v 11.0.09?
It might be possible that a firewall or antivirus might be breaking the connectivity from Reader to the server.
Try accessing the service from the browser: https://cloud.acrobat.com/exportpdf and check if that works for you.
Regards,
Rave

I want to delete my gmail on my iPad, yet my iPad won't allow me to access the option. I went on my iPad settings Mail, Contacts, Calendars, although i cannot tap on iCloud, Gmail, or Add Account... How do i fix this?

I want to delete/sign out my gmail on my Ipad, but my ipad won't allow me to delete it.
Example:
I tapped on Settings>Mail, Contacts, Calendars, although I cannot tap on iCloud, Gmail, and Add Account...
how do I fix this?

Sorry, you said Gmail. If that's the case, you can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
Try again to see if the problem persists.

HT201304 Won't allow app purchase said contact customer support

PPlease help I changed my payment info from ex credit card to mine then attempted to make purchase and it won't allow me to says contact support I did waiting awhile still no response

Did you already contact iTunes Support, using this link?
iTunes - Contact Us - Apple Support

I am trying to text from my new IPad2 and some of the contacts names turn red and won't allow me to send. Why?

I am trying to text from my new IPad2 and some of the contacts names turn red and won't allow me to send. Why?

The recipients have to have an apple device and an apple id.
about messages
http://support.apple.com/kb/HT3529
Troubleshooting messages
http://support.apple.com/kb/TS2755

When I connect my iPhone (5s) to my computer it says that it's storage is full and that I have over 4,000 pictures even though I have deleted all of them. It won't allow me to add music or anything else either because it says my phone is full.

When I connect my iPhone (5s) to my computer it says that it's storage is full and that I have over 4,000 pictures even though I have deleted all of them. It won't allow me to add music or anything else either because it says my phone is full. I have restarted my phone and the computer multiple times, but it still tells me that my phone is full.

iPod touches or any iDevices from Apple sync only to one computer. If you sync to a different computer, all your music will be replace with the music from the new computer's iTunes. If the music were purchased from iTunes, you can re-download them again otherwise the music on iPod touch will be deleted. Do you have iTunes backup?

I used iphotos to create a photobook. I want to send the book to my aunt in the states but it won't allow me to do that. I was just wondering why it won't allow me to put in her address so the book can go directly to her home.

I used iphoto to create a photobook. I want to send this book to my aunt in california but it won't allow me to put in her address. I would like to know how
i can have this book sent directly to her home.

FOR ASSISTANCE WITH ORDERS - iTUNES STORE CUSTOMER SERVICE
For assistance with billing questions or other order inquiries, please refer to our online support page by clicking here: http://www.apple.com/support/itunes/store/. If you cannot find the answers you are seeking in our robust knowledge base, you can contact us by visiting the following URL http://www.apple.com/support/itunes/store/, clicking on the appropriate Customer Service topic, then using the contact button or email form at the bottom of the page. Responses to emails will be provided as soon as possible.
Phone: 800-275-2273 How to reach a live person: Press 0 four times
Hours of Operation: Mon-Fri: 9am-5pm ET
Email: [email protected]
How to report an issue with Your iTunes Store purchase
http://support.apple.com/kb/HT1933
iTunes Purchase Problems: How to Report a Problem to iTunes Support
http://tinyurl.com/7tscpa7
How to Get a Refund from the App Store
http://gizmodo.com/5886683/how-to-get-a-refund-from-the-app-store
Getting Refunds for your iTunes Store Purchases
http://www.labnol.org/software/itunes-app-store-refunds/13838/
Canceling a Digital Subscription
http://gadgetwise.blogs.nytimes.com/2011/10/14/qa-canceling-a-digital-subscripti on/
 Cheers, Tom

Using Photoshop online, when I try to open a file in RAW filter the page opens in bright red and won't allow me to acess the filter. What am I doing wrong?

Using Photoshop online, when I try to open a file in RAW filter the page opens in bright red and won't allow me to acess the filter. What am I doing wrong?

Photoshoponline has a link you can try which web browser are you using? If may be your browser or that they do not support your camera's raw format. I received an error tht states try layer. You should ask them your question Adobe Photoshop is not the problem its their Web application use their link Pixlr.com Contact Us

A PKGBUILD that allows multiple installed kernels

Hi All,
I've had so many people help me with so many things here at Arch, hopefully this will be useful to someone.
What is it:
I've got a kernel PKGBUILD file that allows me to build and install as many different kernels as desired, as long as each one has a unique $pkgver-$pkgrel setting.
/var/abs/local/kernel-custom1/PKGBUILD:
# $Id: PKGBUILD,v 1.17 2004/05/11 23:25:20 judd Exp $
# Maintainer: judd <[email protected]>
# 2004/06/30: Modified to support multiple loaded kernels -jea
# Any kernel with a unique $pkgver-$pkgrel will not conflict with others.
pkgver=2.6.6
pkgrel=custom1
# name mangling is necessary so pacman will load multiple packages
pkgname=kernel$pkgver$pkgrel
pkgdesc="Linux Kernel ver: $pkgver, build: $pkgrel"
url="http://www.kernel.org"
depends=('module-init-tools')
# Is this file were patches to grub/menu.lst should occur? -jea
install=kernel26.install
source=(ftp://ftp.kernel.org/pub/linux/kernel/v2.6/linux-$pkgver.tar.bz2
config)
# patch makepkg to use as many sums as listed, in order? -jea
md5sums=('5218790bc3db41e77a7422969639a9ad' 'fd32e9f43e9b6060e01f71d666372518')
build() {
cd $startdir/src/linux-$pkgver
# get rid of the 'i' in i686
carch=`echo $CARCH | sed 's|i||'`
cat ../config | sed "s|#CARCH#|$carch|g" >./.config
yes "" | make config
# set EXTRAVERSION to create unique /lib/modules/ subdirectories
cat Makefile | sed "s|EXTRAVERSION =|EXTRAVERSION = -$pkgrel|" > tmpMake
mv tmpMake Makefile
make clean bzImage modules || return 1
mkdir -p $startdir/pkg/{lib/modules,boot}
make INSTALL_MOD_PATH=$startdir/pkg modules_install || return 1
# create unique names in /boot/
cp System.map $startdir/pkg/boot/System.map-$pkgver-$pkgrel
cp arch/i386/boot/bzImage $startdir/pkg/boot/vmlinuz-$pkgver-$pkgrel
install -D -m644 Makefile $startdir/pkg/usr/src/linux-$pkgver/Makefile
install -D -m644 .config $startdir/pkg/usr/src/linux-$pkgver/.config
install -D -m644 .config $startdir/pkg/boot/kconfig-$pkgver-$pkgrel
mkdir -p $startdir/pkg/usr/src/linux-$pkgver/include
mkdir -p $startdir/pkg/usr/src/linux-$pkgver/arch/i386/kernel
for i in acpi asm-generic asm-i386 config linux math-emu net pcmcia scsi video; do
cp -a include/$i $startdir/pkg/usr/src/linux-$pkgver/include/
done
# copy files necessary for later builds, like nvidia and vmware
# does this "$pkgver-$pkgrel" multi-kernel strategy screw these up? -jea
cp -a scripts $startdir/pkg/usr/src/linux-$pkgver/
cp arch/i386/Makefile $startdir/pkg/usr/src/linux-$pkgver/arch/i386/
cp arch/i386/kernel/asm-offsets.s $startdir/pkg/usr/src/linux-$pkgver/arch/i386/kernel/
# copy in Kconfig files
for i in `find . -name "Kconfig*"`; do
mkdir -p $startdir/pkg/usr/src/linux-$pkgver/`echo $i | sed 's|/Kconfig.*||'`
cp $i $startdir/pkg/usr/src/linux-$pkgver/$i
done
cd $startdir/pkg/usr/src/linux-$pkgver/include && ln -s asm-i386 asm
cd $startdir/pkg/usr/src
# create a unique subdirectory under /usr/src/
mv linux-$pkgver linux-$pkgver-$pkgrel
chown -R root.root $startdir/pkg/usr/src/linux-$pkgver-$pkgrel
cd $startdir/pkg/lib/modules/$pkgver-$pkgrel &&
(rm -f build; ln -sf /usr/src/linux-$pkgver-$pkgrel build)
How it works:
The primary thing I've usually done is wipe out my custom kernel by inadvertantly overwriting the loadable modules in the /lib/modules/$pkgver directory with a pacman -Su.
The reason for this is that the current arch kernel build does not set the EXTRAVERSION variable in the kernel top level makefile. Therefore all kernels of the same $pkgver use the same /lib/modules/$pkgver/ subdirectory.
The above PKGBUILD sets EXTRAVERSION to the $pkgrel variable.
This causes the loadable module tree to be in a /lib/modules/$pkgver-$pkgrel/ directory.
There are two other places where kernels experience file conflicts:
/boot/
/usr/src/
The /boot/ files: vmlinuz, System.map and kconfig are given unique names by appending the $pkgver-$pkgrel string.
The /usr/src/linux-$pkgver/ directory is moved to /usr/src/linux-$pkgver-$pkgrel/.
This allows the loadable kernel, the loadable modules and the stripped source headers to be in a unique place for each different kernel. Therefore multiple kernels can be loaded concurrently and the desired one may be chosen at boot time by grub.
The only thing a little weird about this, is the $pkgname variable. pacman will only load one version of each $pkgname, so for multiple kernels to be loaded, they each have to have a unique $pkgname. This is accomplished by appending the $pkgver and $pkgrel to the $pkgname. This is fine, except it gives a slightly weird name for the resulting kernel package file. It has the format:
kernel$pkgver$pkgrel-$pkgver-$pkgrel.pkg.tar.gz
That is, the $pkgver and $pkgrel appear in the package file name twice. This also shows if one issues:
pacman -Q | grep kernel -
Which yields for me:
kernel2.6.6custom1 2.6.6-custom1
kernel2.6.61 2.6.6-1
kernel26 2.6.7-1
This command could only have shown one package before, now it shows that I currently have installed: a custom 2.6.6 kernel, the stock arch 2.6.6 kernel built with the above PKGBUILD and the current arch kernel26 package.
I may choose between any of these at boot time with grub. And as an added bonus, the next time I pacman -Su I won't wipe out my custom /lib/modules subdirectory 8-)
All of this assumes the supply of your own custom config file as in the arch wiki Building the Kernel in ABS instructions.
Idle thoughts:
It would sure be nice if something like this could be adopted for the stock arch kernels. Unlike most other packages it is often desirable to have multiple versions of the kernel package installed at once.
I wonder if it is practical for pacman to allow multiple versions of the same $pkgname to be installed concurrently if the $pkgname-$pkgver-$pkgrel string is unique and the different versions do not have file conflicts?
The other major package I could see this being applied to is gcc. It would be really cool to load different cross and other configurations of gcc concurently.
I find one of the most diifficult things needed to get a workstation running is getting all of the correct kernel modules built in. It seems that most PCs today have all the major features built in to the motherboard chipset: graphics controller, sound, usb, ethernet, etc. If it was possible to build a database of custom kernels, one for each major chipset, then one could be chosen by hardware detection at install time. This would provide the benefits of a custom kernel in an autoload fashion.
Just dreaming...
Conclusion:
I'm not sure how this strategy fits in with the bigger pictiure of running pkg repositories, building dependent packages, who knows what else.
The thing I hope to add next is automatically adding and removing entries into: /boot/grub/menu.lst when the kernel package is installed and removed. The $pkgdesc string is perfect for serving as the title line.
Hopefully this can be useful to others, it has helped me clean up my multi-kernel mess here.
Thanks Again for such an awesome distro...
John E. A.
p.s Arch Rulz!

Thank you, I tried to set something up like this in the wiki, but never tested it and it didn't work for some users. You've tested it well?
If so, you can copy it over to the wiki (edit or overwrite the Kernel compile with ABS wiki entry), or I can.
Thanks again, its much appreciated.
Dusty

How do I use my iTunes cards money which is in my account but the payment information won't allow me to use the money

The payment information i put was none but won't allow me to access the iTunes gift cards money

As far as I know, your registered location and your credit card information must match... but,
This is an open forum, not Adobe support... you need Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

Won't allow multiple contacts

Similar Messages

Maybe you are looking for