Won't back up after install

I installed two macbooks to my existing network (linksys). Green light on Time capsule is on but there is no download occuring. What is wrong?

Have you configured Time Machine to use the Time Capsule via System Preferences -> Time Machine?

Similar Messages

Macbook pro won't boot up after installing a Micro Trend security.

Macbook pro 13" unibody non-retina won't boot up after installing a Micro Trend security.
Please Help Thanks!

Boot to safe mode and uninstall Micro Trend from there.
http://esupport.trendmicro.co.jp/Pages/JP-2075680.aspx

Ipad won't start up after installing an update. Shows itunes icon with cord from the side.

ipad won'tstaart up after installing an update. Shows, itune icon and cord going tothe side. Cant make it do anything else.

That means that you have to restore the de ice using iTunes on a computer. There is nothing else that you can do to fix it now and you cannot back it up now either. Connect the iPad to your computer and launch iTunes and restore the iPad.
IF you don't have a computer, find someone that has one running iTunes or go to an Apple Store and ask them to restore it for you.

Mac pro won't wake up after installing Mountain Lion

After installing Mountain Lion in my Mac Pro it won't wake up after long periods of sleep. I have tried unplugging it for 15 seconds and plugging it back in and starting it back up. No help. I've reset the Pram with no change.
Chuck

Two calls into tech support, but I think they may have helped me fix this.
CHECK:
\Library\LaunchAgents
\Library\LaunchDaemons
\Library\StartupItems
remove any third party software and set aside. (they told me I could keep some adobe, microsoft and HP items)
THEN CHECK:
System Preferences --> Users + Groups -->Login Items
remove any third party stuff from in there.
I'll know tomorrow morning if this REALLY works, but it dfefinitely allowed my computer to sleep and wakeup over a short period of time.

Time Machine won't back up after system restore

I just restored my system after a failure, and now Time Machine won't back up my hard drive. It gets about 40 out of 90 Gigabytes done, and then gives me an error message that just says that there was an error while backing up, and doesn't give any other information. I ran a Verify Disk with Disk Utility, and there is nothing wrong with the backup drive, and there is more than 200 Gigabytes of space left on that drive.
Thank You.

zhoffmanster wrote:
Ok, so here's the thing: I tried backing up again today, and it worked just fine. Before, what would happen is a message would pop saying "an error has occurred during backup" (or something close to that). The point is, the message didn't give any detail.
No, the point is, you seem to have ignored this:
See the Time Machine - Troubleshooting post at the top of this forum.

Can i install mac osx back again after installing windows 7 on my mac book a1181?

i have apple mac book a1181 white, but i had problem logging on as it was secured by a password, and i allready lost my recovery dvd, so i installed windows 7 on my mac book a1181 by deleting its partition from GTP to NTFS but i experienced problems after installing windows 7 as sound was not comming as i could not find sound drivers for macintosh, so now i plan again to restore my apple macbook a1181 back by reinstalling mac osx 10.5.8, how can i again install mac osx on my notebook and is it possible to re-install mac on my notebook? please give me some help.

Insert your OS X install disc and restart holding the C key, hold it down until you see the Apple logo and spinning gear. Choose your language and at the next screen from the top menu bar select Utilities-Disk Utility. Select your internal hard drive, click on the Partition tab and select 1 partition. Click on the Options button and select GUID partition scheme. Click OK. Choose to format the drive as Mac OS Extended Journaled. When Disk Utility is done and your drive is properly partitioned and formatted quit DU and go back to the installer screen and reinstall OS X. When you're up and running run software update a couple times to get everything up to date as far as you can with 10.5.8. Then consider upgrading to OS X 10.6.8 Snow Leopard for $19.99 here http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

Mail.app won't work properly after installing Yosemite

My "new viewer window" in Mail.app won't work after installing Yosemite. I can not access the viewer window and thus none of my email.
How can I fix this?
Mail.app v 8.0

some updates on this issue, Mail application uses the same proxy that has been set on your system (system preferences==>Network==>Advanced==>proxies). People usually use HTTP/HTTPS proxy for surfing the web. You should make sure to set SOCKS proxy as well. Mail application works with SOCKS proxy. Note that port number for SOCKS proxy is usually different from the port number for HTTP and HTTPS but the IP address of your server (apparently) is the same.
Hope this helps

Computer won't start up after installing iLife '09

My MacBook Pro is now stuck in a bricked mode after installing iLife '09.
Install:
1. The install went perfectly unlike some of the posts I have read.
2. The installer asked me to register and I chose "later".
3. The installer asked to restart to complete the process and I accepted.
4. Then it restarted my machine and the progress spinner just sits there for five minutes...then the computer just shuts off cold.
Fix Attempts:
1. Tried restarting manually many times, but it keeps shutting itself off after five minutes of spinning.
2. Tried zapping my P-Ram by restarting and holding down commandoption+pr a few times, but that didn't help.
3. Restarted while holding down option to boot Windows XP. Windows booted successfully and then I restarted back in Mac mode, but that didn't help.
4. I ejected the iLife '09 disc and unplugged the power chord and USB iPhone charger, just in case that has anything to do with the ghost in the machine, but that didn't help either.
I'm left trying to decide what to do. Going to the Genius bar does not appeal to me for various reasons.
Any one else out there experience this problem and get things running again??
~adam
Message was edited by: adam_glazier

Since I don't have the original install discs that came with my computer, I tried these things:
1. Tried booting in Safe Mode by holding down the shift key at start up, but does not help.
2. Booted in Single-User Mode by holding down command+s at start up. Then I get the fsck diagnostic by typing in "/sbin/fsck -fy".
Did that three times and get the same response:
/dev/rdisk0s2
Root file system
Checking Journaled HFS Plus volume.
Checking Extents Overflow.
Checking Catalog file.
disk0s2: I/O error.
Invalid key length
(4, 25236)
Volume check failed.
/dev/rdisk0s2 (hfs) EXITED WITH SIGNAL 8
:/ root#
Then I ran the command "df -hl" to see what the drive space looks like. Looks good enough:
Filesystem root_device
Size 80Gi
Used 68Gi
Avail 12Gi
Capacity 86%
Mounted on /
Any ideas if this helps??

Sites I visit most often won't work immediately after installing Leopard

Immediately after installing Leopard the three sites I visit most often won't pull up at all. They just show an error as if the MacBook isn't connected to the internet.
Other sites pull up fine.
These three sites I am trying to visit pull up fine on other computers.
These three sites won't work regardless of what wireless network I'm on.
The problem is exactly the same between Firefox and Safair.
What suggestions do you have or where can I start?
Thanks a ton guys

Figured it out. I have a program called SelfControl that helps block sites that you find yourself killing a lot of time on. Well after the update it appears that it was somehow activated and thus wouldn't allow those sites to come through. Unique problem.
All fixed now.

Bluetooth Keyboard/Mouse/Trackpad won't automatically connect after installing Boot Camp

Hey guys!
Another peculiar thing happened to me today with my 3-week-old maxed-out 2012 iMac (other than it kernel panicking when I powered it down the other day...did I mention this was 3 weeks old?).
After installing Boot Camp which I will never do again, my iMac (on the OS X side) no longer recognizes my stock Apple Wireless Keyboard, Magic Trackpad, or Magic Mouse automatically, until I press a button on the keyboard and wait 5 seconds, click the trackpad and wait 5 seconds, or click the mouse and wait 5 seconds.
(The Windows 8 Boot Camp side pairs with the devices immediately after Windows boots, which leads me to believe that the bluetooth devices are defaulting to look for Windows.)
One of my huge fears I had when considering purchasing an iMac is that the Bluetooth devices wouldn't immediately connect. Being a power-user with former Mac notebooks and working understandably fast having owned a web development company for 8 years now and not having to worry about Bluetooth device pairing, I'd like to think this fear is substantiated. But after first use (before installing Windows 8 with Boot Camp Assistant) it functioned normally and the iMac would automatically discover my peripherals and connect them by the time time computer turned on. I also had no trouble holding the Option key on boot to select a boot device....
Now, ever since I set up Windows 8 on the Boot Camp partition and paired the keyboard/mouse/trackpad to Windows, the Mac side completely ignores the keyboard/mouse/trackpad until I click a button on each.
I'm trying to keep it together but this is raging me out.
I went into Windows, immediately unpaired the 3 peripherals from windows and now use a wired keyboard/mouse with Windows (yay, desk space!), deleted the items entirely from the bluetooth panel, then booted to Mac and did the same thing. I then re-paired the devices to the OS X side andddd...no go! Still doesn't find them automatically. I am extremely upset by this and can't seem to fix it.
To summarize, my two issues are:
A. The iMac in OS X does not automatically recognize my bluetooth peripherals until I click a button on each and wait a couple seconds for them to pair.
B. I cannot hold Option to select a boot device (or choose Windows/Mac for example) because the computer doesn't recognize the keyboard until OS X boots and I press a key.
Please...for the love of god...someone help me, and stop me from formatting my entire computer over this issue.

I don't have a logitech mouse, but is it possible that the mouse is going to sleep during the reboot, and is thus unavailable when the OS is looking for it?

TS3212 Itunes won't open. After installing it, It wont open. It only comes up with an itunes software licence agreement then it disaperes and nothing happends? any sujestion will be greatly apreciated.

Itunes wont open. After installing it, It wont open. It only comes up with an itunes software licence agreement then it disaperes and nothing happends? any sujestion will be greatly apreciated.

hi Shaun!
after installing the update for iTunes, it doesn't run (comp makes noises but nothing comes up on screen). when i open task manager itunes is running as a process, but i can't end process.
hmmm. okay, Norton is still our prime suspect here. that "running itunes.exe process that will not die" symptom is associated with the nastier versions of the NIS 2005 launch suppression problems. (people who get that also often see things like looooooong sloooooow shutdown times on the PCs and odd end program dialog boxes.)
let's try throwing the trusty Lorraine M technique at the beast. (it usually fixes the nastier versions of the NIS 2005 problems.)
Lorraine M: NIS/itunes problem rectified
love, b

Won't start up after installing iTunes update

After installing an iTunes update yesterday morning, I shut down my computer while I was gone all day. When I returned home and restarted it, I got the white Apple screen and gray wheel for an unusually long time, 30-45 seconds. Then the screen turned black and the following appeared:
Sept 13 09:33:05 com.apple.inbindd: Bad System Call
Sept 13 09:33:05 com.apple.inbindd: respawning too quickly! throttling
Sept 13 09:33:05 com.apple.inbindd: 9 more failures without leaving at least 60 seconds will cause job removal
Sept 13 09:33:05 com.apple.inbindd: will restart in 60 seconds
... some other prompts flashed up on the screen, too quickly to read what they said...this continues for at least 2 minutes before getting this message:
Sept 10 06:33:05 com.apple.inbindd: to many failures in succession
Sept 10 06:33:05 localhost:/ root#
And then nothing happens. I found a ProBook user on another board who got the same error after installing an iTunes update, and restarting in 'safe mode' seemed to help him. I tried to follow the same instructions but they must be different for the iMac--holding down the shift key while restarting made no difference.
iMac 17" Intel 1.83 GHz 512MB 160GB SD/AP/BT
Not being able to even get to the desktop--I am at a total loss. Please help!

The Safe Mode startup key combo is the same; Startup key combinations for Intel-based Macs, it just isn't working for you.
I suggest starting from the Install DVD that came with your iMac. Once in the Installer you will find tools in the Utilties menu. Using the Disk Utility try repairing the startup volume.

Help, cd reader won't read cds after installing latest itunes upgrade.

Just inserted a music cd (non-pirated) into my macbook but it keeps getting auto-ejected. Tried this with several music cds. This issue only cropped up AFTER installing the latest iTunes update on 11 June 2011.

Hi, and welcome to Apple Support Communities.
You could try going to System Preferences > Accounts and create a new account to see if the problem also occurs in a new account. If so, it would point to a hardware problem with the optical drive.

Time machine won't back up after Maverick install

Installed Maverick today on macbook pro, then have been unable to back up to Time Machine to my Western Digital 3TB drive. Last back up was successful just before install earlier today.
Time Machine Error "Files can’t be copied onto the backup disk because it appears to be read-only.
and a second message
Time Machine couldn’t complete the backup to “My Book”. Files can’t be copied onto the backup disk because it appears to be read-only. You may need to repair or reformat the disk using Disk Utility. If the disk can’t be repaired, you must use a different disk for backups. Open Time Machine preferences to select a different backup disk.
First restarting after Maverick install I received an error message that the disk "my book" could not be repaired.
When I go to get info on the external drive, under sharing and permissions it sayes I can read only, and I cant figure out how to change this everything to try is grey'd out.
Any help in fixing the problem and understanding the issue.

I'm also having this issue. I havn't had it before.
Any help would be appreciated.

WIndows 7 Ultimate WMP won't play MPG after installing Roxio Creator NXT Pro - Event ID 1000 (100)

HP dv7t-6100 CTO Quad Edition Win 7 Ultimate SP1 fully updated (sfc, CHKDSK and Malwarebytes scanned - all clean)
Seems like a simple DLL conflict per the Event Viewer details below:
Faulting application name: wmplayer.exe, version: 12.0.7601.18150, time stamp: 0x518c6df8
Faulting module name: dsfOggDemux2.dll, version: 0.80.15035.0, time stamp: 0x4f86e998
Exception code: 0xc0000005
Fault offset: 0x000042b7
Faulting process id: 0x1394
Faulting application start time: 0x01cf17b19b615a49
Faulting application path: C:\Program Files (x86)\Windows Media Player\wmplayer.exe
Faulting module path: C:\Program Files (x86)\Common Files\Roxio Shared\OGG_Flac Codecs\dsfOggDemux2.dll
Report Id: de83bdca-83a4-11e3-b32d-2c27d7a9fbb9
I uninstalled Roxio Creator NXT Pro (& used their cleanup program and CCleaner only on Roxio remnants) and the problem disappeared. Did a complete re-install of Roxio and the same problem came back. Curious as to why WMP would link to a Roxio
DLL anyway. BTW: Windows Media Center plays the same MPG files (w Roxiol) just fine so maybe not worth the $$$ below. Had no problem with WMP & Roxio Creator 2011 but the USB video capture device failed so I had to upgrade.
Per incident: Roxio wants $25 / MS wants $49. Thought I'd try "free" here first, not sure who owns this problem.
(I guess the ~$49 Roxio Easy VHS to DVD Converter package has NO SUPPORT and 65% ONE STAR Amazon reviews - support only for their "Premium Products") Maybe if they sold stuff that worked none of them would
need "support"!
TIA,
JCN

(a) My account is an administrator account.
(b) I did try turning WMP and WMC on and off independently within and without Roxio installed. Without Roxio WMP works fine. WMC works either way.
(c) I did several more uninstalls / re-installs of Roxio product including using Revo Unistaller and Roxio's c2011_systemclean.bat "clean-up uninstall tool"). None of which worked and even made it worse (see below).
My original key question still is: Why does WMP fault via a Roxio dll? dsfOggDemux2.dll (codec). How is this even possible for there to be such a linkage?
After all this effort now a clean reinstall of Roxio NXT Pro leaves me with this -->
RoxioCentrtalFx.exe (their master gatewte interface) will not start-up with this new error (and un-fixable):
Faulting application name: RoxioCentralFx.exe, version: 5.0.0.0, time stamp: 0x50077c71
Faulting module name: KERNELBASE.dll, version: 6.1.7601.18229, time stamp: 0x51fb1116
Exception code: 0xe0434352
Fault offset: 0x0000c41f
Faulting process id: 0x1a40
Faulting application start time: 0x01cf1846d5b6b1cb
Faulting application path: C:\Program Files (x86)\Roxio Creator NXT\Roxio Central\RoxioCentralFx.exe
Faulting module path: C:\Windows\syswow64\KERNELBASE.dll
Report Id: 18f55045-843a-11e3-981e-2c27d7a9fbb9
Although the two Roxio programs I use will start via shortcuts: mediacapture14.exe &
mediamanager14.exe
When the later program occasionally stops working, the application error, is via ntdll.dll which I noticed was updated in a series of Windows updates (about 12-14 of them) around the 8/27/2013 timeframe. I kind of don't believe in co-incidences.
My one and only Roxio Forum responder kind of suggested "why you and nobody else?" (having these problems, i.e., I am the crazy nut job here) to which I referred him to the hundreds of reviews on Amazon, etc that gave Roxio 2012 products, etc ONE STAR or
less (about 50% out of >300). I NEVER had this much trouble with Roxio 2009-2011. Must be that new Corel culture ownership sinking in.

Won't back up after install

Similar Messages

Maybe you are looking for