Won't boot and shows flashing file folder with ?

My Mac Air will not boot. Instead it just flashes a gray file folder with a question mark?

Click here and follow the instructions. If the computer was running Mac OS X 10.6.8 or earlier and you reach the third set of steps, insert a Mac OS X install disk or connect the computer's original thumbdrive.
(119940)

Similar Messages

MacBook Pro flashes file folder with question mark and startup manager will not run

My son's MacBook Pro won't boot (gets the flashing file folder with question mark). When I try to open startup manager (holding "option" key during boot does not do it). Other posts suggest inserting the install disk, but I am pretty sure that for Lion, there was no disk, it was just off the website through the App Store. Any further suggestions?

Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

HT2433 My laptop opened with a grey flashing file folder with a question mark inside it . How to to open my laptop! I have tried fir e clising several times and restArting nope nada!

My laptop opened with a grey flashing file folder with a question mark inside it . How do I open my laptop! I have tried force closing several times and restArting nope ! nada! Suggestions?

That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the Operating System data on the hard drive is somehow corrupted.
With 10.4, 10.5 or 10.6 put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
Or if you are running 10.7 Lion, 10.8 Mountain Lion or 10.9 Mavericks, boot from the recovery partition (Command +R on boot) and use Disk Utility to repair your OS 10.7, 10.8 or 10.9 partition.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
If it is, then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions. After repairing use Startup Disk from the same menu to choose your hard drive for restarting from your hard drive.
If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

Cannot get into mac. I get a white screen and flashing file folder with question mark inside. What can I do?

2012/13 MacBook Pro froze up, so I did a hard shut down. Now, when I try to start up, it makes 3 unusual beeps, then I get a white screen. After a couple minutes, a flashing file folder with a question mark appears and remains. What is wrong and what can I do to fix it.

Three beeps usually means a RAM or RAM slots problem. The Question Mark means there is no bootable system found.
A flashing question mark or globe appears when you start your Mac
Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark or globe appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by one or more of these:
a. Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
b. Boot drive's directory has been corrupted - Repair with Disk Utility.
c. Critical system files are damaged or deleted - Reinstall OS X.
d. The disk drive is physically non-functional - Replace the hard drive.
Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

I had to restart my iMac and when it came back on the screen shows a file folder with a question mark. What should I do?

I had to restart my iMac and when it came back on the screen shows a file folder with a question mark. What should I do?

Did you move any system files? It's looking for the system folder. You can startup from the system CD by inserting the CD and restarting the computer and at the same time hold down the C key. The computer will boot from the CD. At that point run the disk utility and check your hard-drive. It the problem persists then do a fresh clean install of the system folder and that should help you get back on track.
Good Luck.

When booting up get flashing apple folder with question mark and no sign, why?

When booting up get flashing apple folder with question mark and no sign, why? Computer will not open up. I have tried resetting the Pram. I can access the hard drive from another computer holding down the t key when starting up the Macbook Pro. What to do next?

The cable connecting the HDD to the logic board may be faulty. If the internal HDD can boot the MBP when in an external enclosure, that will confirm this issue. If not, the HDD may need to be replaced.
Ciao.

When I start my macbook a flashing file folder with a ? mark appears in the middle of my screen.

When I start my mac book a flashing file folder with a question mark in the middle appears in the middle of my screen.

That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the Operating System data on the hard drive is somehow corrupted.
Put your install DVD into the optical drive and reboot. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Just press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
If it is then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions.
If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

When I power up my Mac-Pro I only get a flashing file folder with a ? inside the folder. I suspect my hard drive is maxed to capacity can anyone help me as to what I should do?

When I power up my Mac-Pro I only get a flashing file folder with a ? inside the folder. I suspect my hard drive is maxed to capacity can anyone help me as to what I should do?

Whatever the problem is you no longer have a bootable system. You need to try reinstalling OS X.
Reinstall Snow Leopard without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

What does it mean when there is a flashing file folder with a question mark when trying to start computer?

When I try to start my computer a flashing file folder with a question mark is on the screen. I can't open anything up. What does this mean?

There are four general causes of this issue:
1. The computer's PRAM no longer contains a valid startup disk setting when there aren't any problems with the disk itself. This can be checked for by pressing the Option key and seeing if the drive appears.
2. The internal drive's directory structure has become damaged. This requires usage of an alternate bootable system to perform the repair.
3. Critical system files have been deleted. This requires usage of an alternate bootable system to reinstall them.
4. The internal drive has died or become unplugged. This is the most likely case if the computer took a sharp impact or there are unusual sounds coming from its location.
(104258)

My iMac has a white screen with a flashing file folder with a question mark in the middle. What does that mean?

My iMac is completely unresponsive. Whenever I restart it, it's just a white screen with a flashing file folder with a question mark in the middle. What does this mean?

this means the mac cannot find the startup disc. which more times than not means you need a hdd replacement.
try starting holding the option key, then using utilities try to repair the disc.

My computer won´t boot and restarts at Apple logo with the spinning thing

My computer won´t boot and restarts at Apple logo with the spinning thing and I can´t get it to work.
Before this happen I had left the computer on without a cable plugged in and so it ran out of power.
I just pressed the startbutton again after I´ve plugged it in and this problem started.
Any ideas?
Mattias
Sweden

WRONG FORUM Sorry

My computer is showing a File Folder with a ? Symbol! PLEASE HELP!!!

My computer froze while I was doing homework so I tried to restart it and when I did, It doesn't show the apple logo but rather a File Folder with a ? Symbol! I tried reselecting the hard drive but it didn't show! I looked up how to fix this and tried it all and non of it helped me:/ I CANNOT lose my information on my harddrive cause I have very IMPORTANT work on there! I have mac OS X Lion! So I don't have a start up disk for that and the one i have is stuck in my computer right now! Apple won't help me and I need my computer soon! PLEASE HELP!!!

Reinstalling Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.
Five ways to eject a stuck CD or DVD from the optical drive
Ejecting the stuck disc can usually be done in one of the following ways:
1. Restart the computer and after the chime press and hold down the left mouse button until the disc ejects.
2. Press the Eject button on your keyboard.
3. Click on the Eject button in the menubar.
4. Press COMMAND-E.
5. If none of the above work try this: Open the Terminal application in your Utilities folder. At the prompt enter or paste the following:
/usr/bin/drutil eject
If this fails then try this:
Boot the computer into Single-user Mode. At the prompt enter the same command as used above. To restart the computer enter "reboot" at the prompt without quotes.

Flashing file folder with a question mark when starting my macbook after a few minutes it shuts down, any ideas??

When turned on our Macbook flashes a folder with a question mark in the center screen, then it shuts down after a few minutes. Doea anyone have any ideas how to boot the computer back up?
Cheers

That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the Operating System data on the hard drive is somehow corrupted.
Put your install DVD into the optical drive and reboot. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Just press the Return key on yourkeyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
If it is then click on the Mac OS partition of your hard drive in the left handlist. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions.
If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

IMac won't boot and has flashing folder with question mark on gray screen

I just bought a new iMac. I have been trying all week (with no success) to transfer files and apps from my previous iMac. The last time I tried to transfer, I used target mode on the old computer. It looked as if it was finally working, so I left with 2+ hours remaining on the transfer. When I returned, the computer was frozen and nothing would work. So I held the power button to turn it off. When I tried to turn it back on, there was only a gray screen with a flashing folder with a question mark. I feel like I have tried everything listed in other discussions. The only thing I am not able to try is to reinstall Lion because the new computer did NOT come with an OSX disc of any type. Any suggestions?

Go to > OS X Lion: About Lion Recovery

Flashing file folder with question mark

Hello,
i have a mid-2010, 15"' MacBook Pro running Yosemite. Also, about two months ago, I replaced the two, 2 GB memory modules with two 4GB modules. Just in the past week the laptop has been acting very sluggish; login won't complete; and today, when first booting it up, I got a gray screen with a flashing "question mark" file folder. I've NEVER seen this before. In all the years I've been an Apple fan and user, I've never experienced a moments trouble.
In searching for other questions similar to mine, I read to restart in Safe Mode, select Disk Utility, then run Disk Repair on the Macintosh HD volume; exit Disk Utility, and restart from the Apple menu in regular mode. These steps worked however, once the laptop began restarting, it took at least 10 minutes to get to the desktop.
I am considering backing up critical files and wiping the hard drive clean or restoring it to factory. I don't know if this is necessary or if it would rid the system of whatever it is that's causing these issues. Also, I've not ever done this before so I don't know what issues I may encounter, or exactly what steps to take to accomplish this. If such drastic measures are not necessary, suggestions as to what I can do to correct these issues are appreciated.
Suggestions are welcomed. Thanks in advance.

That is a sign that the MBP cannot find the OSX. Usually is is a failing HDD or a faulty SATA connection cable/
Backup your data.
Then boot the MBP in the recovery partition and select Disk Utility from the 4 option menu.
Run Disk Utility>First Aid, Verify and Repair.
If the Disk cannot be repaired.
If the disk is OK, and the problem still persists, that points to the Cable.
Take out the HDD and connect it externally via USB in an enclosure.
If the MBP can be booted using Startup Manager, then the cable is probably faulty and should be replaced.
https://support.apple.com/en-us/HT1310
Ciao.

Won't boot and shows flashing file folder with ?

Similar Messages

Maybe you are looking for