WoN't boot with Graphics Card in.

Hello guys, I am in abit of a pickle here. I just got my new PC working and running with a MSI Z77 MPower motherboard. I get a signal on the monitor using the HDMI on the motherboard and if my graphics card isn't in. But once I do put it in the PCE slot, it wont boot. What is the problem?
I got a HD76950, and a XFX ProSeries XXX Edition 750W PSU. Everything is new ex the graphics card, it worked perfectly in my old case and motherboard.

Refering to https://forum-en.msi.com/index.php?topic=165995.msg1215931#msg1215931 that I made on friday. This is a brand new motherboard that I recived today. MSI have offered to service the "old" after I bought another one, so this is starting to become really fun. This has never happend with my two other PCs that I built or my friends that I helped.
"" Dear Mathias,
Based on the pics you sent us our Headquarters has decided we will exceptionally service your motherboard.
Please contact Komplett Services AS to send the board in for RMA Service.
I will inform Komplett that they have to accept the board for service.
**Do not post contact details of MSI employees on the forum!

Similar Messages

IMAC won't boot with USB card reader attached

My quite new 24" iMAC won't boot if I have a USB card reader attached:
I get to the white screen with the apple logo, but it gets stuck there and the little spinning gear below the apple logo never appears (I've waited several minutes). (In all my test cases, there is no card in the card reader.)
I've tried two different card readers with the same results ("iDOTconnect" brand and a brand new Apacer unit, both are USB2.0 multi-format card readers).
The 1st one I tried via a USB hub, the second one I tried via a new hub and also directly connected to the mac (both of those hubs work fine).
Anyone have any ideas?
Regards,
Strathglass
Message was edited by: strathglass

Hello strathglass
The same thing can also happen with other connected devices such as external HD's and iPods, the Startup Manager is lost and searching for a boot volume.
1. You may be able to fix it by going to: *System Preference / Startup Disk* and select the *Mac OS X 10.5.5 on Macintosh HD* then *Click the lock to prevent further changes.*
2. Leave those devices that cause boot issues disconnected until the iMac is up and running!
3. Only sleep the iMac, and be sure to disconnect those devices be for shutting down or updates that require a restart!
As a habit, I have always ejected and disconnected all mounted USB devices (flash driver, iPods, cameras, card reader, etc.) from my hub be for sleeping, restarting or shutting down...
Dennis

[Soundblaster Z] PC won't boot with Sound Card

Hi,
today i got my new Soundblaster Z but my monitors stay black if i try to boot with it installed.
MSI Z97S SLI PLUS
Intel i7 4970k
Geforce GTX 980
Win 7 64
All drivers up to date.
Since my PCIe(x1) 1 is blocked by the CPU Fan and PCIe(x1) 3 is blocked by the fan of the graphics card i only have 4 and 5 left - both are PCIe x16. I tried them several times but the results where always the same - the PC has power but the Monitors stay black. The LED of the soundblaster is red glowing by the way - i don't know if thats normal or a warning signal.
Is the sound card faulty or am I missing something?
Thanks,
Korahan

Hi Korahan,
1) You may want to rearrange your cards to free up a slot, other than 4 and 5, that can fit in the card. If your CPU fan is a separate unit, you might want to remove that temporarily to see if it works. What we want to do here is to identify whether any of the slots are working fine. The PCIe x16 slot is within the specs of the Sound Blaster Z.
2) Next suspect is perhaps your PC's power supply, whether there is enough power for all your installed peripherals.
3) You can try the card on another system just to ensure that the card is not faulty
4) Regarding the LED, this is normal; there are some who found this rather annoying. You can easily search online on how to disable or hide the 2 LEDs. Just note that any physical modifications made to the card will void its warranty.
Cheers,
Colin-CL

Hp m8430f won't boot with video card

I have a HP Pavilion Media Center m8430f Desktop PC.
One day on startup my acer flat screen wont show bios or anything.
If I remove the 8500 gt and use integrated graphics, it works fine with my old crt monitor and I’m actually using it to write this.
If I insert the 8500 gt, however, my lcd monitor gets no signal and I hear no OS sounds indicating that windows is loading up or anything even though the video card works in another computer and I've replaced the motherboard.
I've tried pretty much everything I can think of, and I'd really appreciate it if you guys could give me some ideas on what to try next.
IPIBL-LB (Benicia) motherboard
Intell core 2 quad Q6600 2.4 GHz
nvidia ge force 8500 gt
Integrated graphics intell gma 3100
tv tuner card
Modem card
4 Gig DDR2 ram
Steps I've taken
Video card and monitor tested and work in another PC
Reset bios with jumper
Removed ram tried one at time .
Removed all cards and tied that.
Replaced power supply
Tried all above again.
Updated bios
Replaced motherboard and put it all back together

The 500w is definitely sufficient and this is such an odd issue. It doesn't make since. We've tested parts in other machines and even replaced parts yet the same problem holds true.
With the video card inserted does the computer boot at all? Do you hear fans turn on lights, anything or is it just dead?
I'm wondering if we should try to get the computer down to as basic as we need it.
1 stick of RAM,
video card
processor
Disconnect hard drive, CD ROM. and see if it boots with just the basics plugged in.
After that I'll admit that I'd be throwing darts in testing things to see if there is something that sticks. Something like trying something else in the PCI slot besides a video card to see if it stops the system from booting.
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical.

Powermac g5 2.5 dual won't boot with video card

Hi all,
So the other day I came home to find my powermac g5 frozen with the fans going crazy. After a hard reset the machine would no longer boot any further than the grey apple (kernel) stage. After pulling the video card the machine would boot up and I could log in using remote desktop from my laptop.
The machine ran that way for a couple of days until I got a new video card. When I put the new video card in the machine would not boot again.(The new card is exactly the same one as the old one)(ATI Radeon X800 XT mac edition).
After pulling the card the machine still wouldn't boot (exact same behavior as with the card) until I let it sit unplugged for 20 minutes or so. Also when it's not booting I can see that a little red light comes on on the logic board behind the cpu's.
Anyways I'm thinking it may be a power supply issue but if any experts wanna help me out with some advice I'd be very grateful.
Thanks in advance,
Cory

Hi Cory,
See if it will Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permission.

Cannot boot with graphics card installed

Specs:
MSI R9 280 TWIN FROZR
ASRock H97M
Core i5 4750
Corsair 750W
8GB g.skills
First time builder. Build was turning on (CPU/case/GPU fans running) but going to a black screen with no bios or POST. No mobo beep codes because somehow it doesn't have speaker bumpers. With the R9 unplugged, it gets to bios fine. I triple checked the power cables and seating of the card. Made sure in the BIOS it was set to PCI-E as the default graphics source. Looked on ASRock's site but couldn't find compatibility info.
Is the card a dud, or is there anything else I should try?
Thanks so much

CPU socket was fine. I switched the bios to internal graphics and kept the GPU installed, BIOS could see the card in the slot fine.. which at first I thought meant the gpu was definitely busted. But then, I switched the PCI-E Speed from "auto" to "Gen2" and default GPU back to the PCI-E slot and lo, it worked and booted. Tried "gen3", didn't work. Switched the switch at the top and tried Gen3, and it worked!
Weirdly, messing around again I un-switched the switch and put it back to "Auto", and it still boots fine now..
EDIT: Never mind, still need gen3/switched to the left

Lenovo Ideacentre K410 won't boot with video card after OS crash and refresh

I purchased a Lenovo Ideacentre K410 from Fry's some time ago. It came with Windows 8. I added a GeForceGTX650. Everything ran fine until yesterday, when the system black-screened in the middle of a Windows 8 update. The update was running from the control panel. After the black screen, I finally got the system to boot again by removing the video card. Even then it said the OS was messed up and offered to refresh it. I allowed it to refresh the OS. Now Windows 8 boots, but not if I put the video card back in. Thanks!

Hi macaria,
Welcome to Lenovo Community Forums!
It might be that the Video Card is Bad that caused the Crash,
The system prompt you for a repair since it was not turned OFF properly when the computer Crashed.
Have the GPU Card tested on another computer or try a different GPU on your system.
Regards
Solid Cruver

KT4AV will not boot with SATA card installed and no SATA drive

I put a Promise brand SATA II card in a KT4AV motherboard. There is an IDE drive and a DVD drive hooked up to the IDE1 port on the motherboard. That IDE drive has Windows XP Pro SP2 loaded on it.
If I have a SATA drive plugged into the card, the machine works fine. If I remove the STAT drive and leave the card in, I cannot boot to Windows. If I remove the card, it works fine. The only time there is a problem is when the SATA card is plugged in and there is no drive on the SATA card.
As one possible solution, I tried to boot to a Windows CD to reload Windows. It will not even allow me to reload from the CD, it says there is a file missing from the CD. If the SATA drive is hooked up, it will work fine on the CD. Also, I tried multiple CDs and they all give the same message. Because it makes a difference whether the SATA drive is connected or not, I do not believe the CD is the problem.
I have tried looking on Promise's web site for a FAQ or an updated BIOS or for other information about this problem and I found nothing. I have e-mailed them and they did not reply yet.
There is no reason to think this is the fault of the motherboard, but I wanted to see if anyone had any ideas about this problem. Because of the symptoms, I believe it also cannot be the CPU, memory, PSU, video card, etc. Sorry if that makes this post off topic.

Quote from: HenryW on 16-March-07, 02:56:44
Have you tried to disable card in Device Manager when you don't use it? What is the model number of the card you are using?
It is a SATA 300 TX2, which means that it has two SATA ports and one IDE port. I have never used the IDE port, only one SATA.
I have never tried to disable it, but I could try, just to see what it did. It sure would be a lot more work to disable and enable it so that isn't a good long term solution. Among other things, it would mean that I would have to boot up in order to remove the SATA drive. Since it won't boot with the drive removed, it will require more planning.
Will post the results once I have tried. Still no reply from Promise :-(

PC won't boot with X-fi XtremeMusic

# This is my first post, so please tell me if I'm not giving enough info or anything..
I bought a X-fi XtremeMusic and wanted to try out.. So I plugged it into a free PCI slot to find out it wasn't working: I couldn't boot. The only thing that would happen were the casefans spinning, but my screen remained black.
I then tried to boot without the soundcard in the PCI slot, but my screen was still black.. Then I removed the onboard battery from the mainboard and waited a minute or two and put it back in: I was now able to boot again. I tried this one more time and exactly the same happened.
Now I read something about X-fi soundcards and nForce4 chipsets not meshing very well, but I have a gigabyte MA-790XT-UD4P mainboard, so this doesn't apply to me I assume.
Other specs: AMD Phenom II 720
XFX Radeon HD 4870
CoolerMaster 620w power supply
My question is: what could be causing this problem? Or is it possible that my card is broken?
Thanks!

'Re: PC won't boot with X-fi XtremeMusic? Yeah I tried it in both PCI slots, but none worked. Still I wonder about one thing, which I forgot to mention: When I replace the onboard battery and boot I get an error (which I resolve by using the last known good option instead of putting everything to stock value as I'm overclocking in the bios) that the bios checksum is incorrect, so putting in the card changes some value in the bios.. But what value? And does this imply that maybe updating my bios might solve the problem?
Also might I ask what bios revision you are currently using (I'm using the F4 bios)
About the case thing you might also be right: I do have some difficulty putting in the card as it doesn't fit perfectly. I have a CoolerMaster CM690 case which has tool-free fittings, but I can't get the fitting which holds the card down without using substantial force. This also causes the card to be in the PCI slot at a slight angle, I thought this wouldn't matter as the pins still connect, but may this be a problem? I already tried starting up without the case fitting holding the card in place and instead using my fingertips to hold in postion, though to no avail.
Oh and exactly what bracket should I look at (the one you referred to in your post)?

E450 won't boot with 4 cpus

E450, 4x300 CPU's all identical, will boot with any one, any two or any three of the five CPU's I have (one extra) but won't boot with any four installed.
When I do I get (transcribed from terminal - no ethernet) is sth like:
CPU0 has assumed the role of boot CPU
Online: CPU0: Ultra-II (V2.0) 3:1 2048kb 2-2 ECache MCap 13
Offline: CPU1:
Online: CPU2: unknown code (code 15) v15.15) ?:? 262080kb ?-? (type 15) ECache MCap 255Incompatable CPU Type -- DISABLED!]
Offline: CP
Hangs right there.
I have latest OP 3.30. Otherwise machine is perfect on three legs!
All points to me to being the top CPU slot maybe? I have a spare board so I'm going to try that.....
In the meantime, any ideas?
Steve

<table border="0" align="center" width="90%" cellpadding="3" cellspacing="1"><tr><td class="SmallText"><b>haroldkarl wrote on Sun, 22 January 2006 12:03</b></td></tr><tr><td class="quote">
the little riser are for is for a sound card... the same one that the Sparc 4 uses... hard to find... the others are "Elite3D-m6 assembly <=540-3058-06 is not compatible with the A20." a horizontal version of the Elite3D-M6... also hard to find.
you do know about this site??? http://sunsolve.sun.com/handbook_pub/Systems/E450/E450.html
haroldkarl
</td></tr></table>
Yes HaroldKarl I know Sunsolve, I work in Sun, but not for Sun!
This is my home E450, I just got it, trying to max it out. I bought four bare ones for 99p, ie about 1.50 Euro....
I used memory from my old Ultra 60, which I thought where 128mb sets, turns out they where 256mb, which the U60 sees as 128mb it seems. Anyway, 3gb RAM now!!
Actually it's quiter than that the U60, a more satisfying low hum of quality iron. I want to take it bed with me!
Steve
PS I have a girlfriend but she's not interested in a threesome with the E450 :(

Sawtooth won't boot with anything plugged into it.

My G4 450 won't boot with anything plugged into it at all. The power will go on but no boot. If I unplug everything (except the power cord) it will boot with a chime. Anyone know what the problem could be?

rs6er:
Well, it's likely to be a problem with the video card, the monitor, or the monitor cable. (I assume that this is your normal monitor which was just recently working on your Mac.)
Some thoughts... Have you tried reseating the video card? Does the monitor power on? Do you have another monitor and cable you can swap and try? Will it boot to Safe Mode ("s" key depressed at startup) with the monitor attached?
Gary
Message was edited by: Majordadusma

Biege G3 won't boot with OS 9.2

I purchased a biege G3 MT with OS 8.6 on eBay. Unfortunately, the OS is in French. I upgraded that to OS 9.2 and now it won't boot. No chime and it stops after the first icon during startup. It won't boot with extensions off nor with the CD. I tried resetting pram, etc. without any luck. Loaded it with 8.5 and it works. Took another HD with 10.2 from another biege G3 and it works. It just doesn't like 9.2, but I have 9.2 running in another biege G3. Are there G3 that won't work with 9.2? Please help.
biege g3 Mac OS 9.2.x

Hi elpro,
Here's a bunch of stock responses you'll hear on the G3 forum.
Is the 9.2 CD a universal installer (gold color), or a gray machine-specific CD, and if it is gray, is it the right one for your machine? Apple made gold CDs for general retail to work with all machines, and gray ones that were usually distributed with a machine with the components just for that machine. Unless you have a universal installer CD, the version of OS 9 you are trying to install may not have the right components for your system unless you happen to have one that matches your type of G3. If the 8.5 CD is the right one, and the OS X you say is from an identical machine then that may explain why they boot up but not your OS 9.
If you post your problem on the G3 forum you'll almost be sure to get this question. How old is the battery in this machine? G3s exhibit all kinds of weird and unexpected symptoms when the batteries are weak, and they go through them pretty quickly, especially if they have been unplugged for a long time. The battery helps preserve basic machine configuration information between bootups so if you're having problems with your monitor it might even be related to the battery. If in doubt, replace the battery.
The PRAM reset and extensions off are the other stock replies but you've tried those.
Brian

Macbook pro won't boot with two new 4GB RAM sticks.

I have a mid 2010 Macbook Pro. It came with two 2GB RAM sticks. After downloading Lion, my computer started to get sluggish so I thought I would upgrade the ram. I bought two 4GB Corsair RAM sticks and tried to install them. My computer will boot up if I install one of the new 4GB sticks and leave an old 2GB stick; but it won't boot with both of the new 4GB sticks. Any ideas?

rdsvs wrote:
all specs are the same. old and new has code as below
pc2-5300 ddr2 667 200pin
Unless I misread your reply, that is not quite accurate.
Late 2008 Macbooks uses DDR3 1066MHz 204 PIN.
Late 2011 Macbooks uses DDR3 1333MHz 204 PIN.
Late 2012 Macbooks uses DDR3 1600MHz 204 PIN.

Won't boot with external display connected

My MacBook Pro (circa 1997) won't boot with the external display connected. I can connect the external display (20in flat planel) after it has started, and it works just fine.
I have tried two different DVI cables (one of which I think is a DVI-A cable) and the DVI-to-VGA cable. The result is the same.
During the boot phase I get the tone, the apple logo and the progress wheel. After 30 seconds to one minute those disappear to be replaced by an empty blue screen.

In case anyone wonders, my "solution" was to change to a WB Elements Desktop 3TB (only USB 2.0 is currently available for this model). I miss the speed of USB 3.0, but it's much nicer to not have to remember to unplug and plug in the hard drive each time I boot.
Still hoping to see a proper solution to this (since I don't have the WB My Book anymore, I can't test adaher's suggestion).

Premiere Elements 10 - Is Mercury Engine compatible with Graphic Card Nvidia GeForce GTX 560M

Premiere Elements 10 - Is Mercury Engine compatible with Graphic Card Nvidia GeForce GTX 560M?
I do not see this card listed on the Adobe products page http://kb2.adobe.com/cps/873/cpsid_87347.html but am hoping someone who is more computer savy at Adobe or Nvidia or somewhere else can advise me.
I'm looking to purchase a laptop with the subject graphics card.
Rob

>Will CS5.5
http://forums.adobe.com/community/premiere/premierepro_current
See link in my answer yesterday... also...
For a list of supported nVidia CUDA cards go to the FAQ
First read http://forums.adobe.com/thread/773101
PPro Video FAQ http://www.video2brain.com/en/products-118.htm
http://forums.adobe.com/community/premiere/premierepro_current/cs5_faq_sheet
Quadro cards compared http://forums.adobe.com/thread/910140

WoN't boot with Graphics Card in.

Similar Messages

Maybe you are looking for