Won't boot with usb printer plugged in!

Not only the printer but my logitech usb charger for my MX700 mouse. Is there a way to fix this?

Quote
what printer is it K8N SLI Issue - USB Mass Storage Issue try disabling USB KB/Storage Support. are there any unidentified devices in device manager with yellow icons - chances are they relate to your printer.
It's a Brothers 210c. I disconnected it like ya'll suggested and I am booting normally,after six weeks. Thanks to all, bchivers.

Similar Messages

Notebook won't boot with usb device plugged

Hi,
Voila, I have a Satellite Pro Sp6100, when i try to boot it whith an usb printer plugged in, the notebook won't start at all. i have latest bios version 1.90.
Thx,
Barzot @+

Hello
It will be interesting to know if the printer is ON or OFF when you start the unit. I have tested my Tecra M1 with USB stick and the boot up procedure needs about 5 min. If I put the USB stick out the unit starts as usual.

Brandnew Lenovo M93 won't boot with USB device plugged in...

Since last week i got the Lenovo M93 with Intel i7-4770 CPU @ 3,40GHz. With 8 GB on board it's a real great machine!
The only thing i notice is when I boot the machine, it hangs on the opening screen, which says 'Lenovo'. Only after I remove all (2) USB connected HD's it advances and starts booting Windows. At that time i can reconnect the HD's
What can be the problem? The only 2 devices are external HD's which worked well on my 6 year old HP machine. One of them has an external powersupply.

lugies wrote:
I restored to Windows 8 from the Lenovo disks, then upgraded to 8.1. I'm booting from UEFI bios, the external is 3TB and is MBR, which is the way it came from the store. Do you think it could be because its MBR partition style?I don't know how a hard drive of greater than 2TB cannot be GPT. At least that's what it is supposed to be. MBR is for 2TB or less. If it came from the factory as MBR, that sounds wrong to me. Unless only 2TB is "visible". All the reports on this forum (in a number of separate threads) about this same problem all talk about (1) Windows 8/8.1, (2) UEFI BIOS, and (3) external drives larger than 2TB. In my own "problem-free" case, it is (1) Windows 7, (2) legacy BIOS, and (2) external drive of 2TB. I'm not denying that there would seem to be a Lenovo problem in the UEFI BIOS, but getting a 3TB drive that's partitioned as MBR sounds wrong. How about if you just delete all partitions on it, and recreate new partitions... with GPT. Use Partition Wizard. Does it make any difference? Or can you still not boot successfully with the USB drive plugged in?

Macbook Pro won't boot with external HDD plugged

I have a weird problem. My late 2008 Macbook Pro won't start with external HDD plugged either FW or USB... The screen stays white until I unplug it and then the Apple logo is there.
Anyone know any solution for this? Or anyone have the same problem

yeah I had the exact same issue with one of my 750GB externals too. I just left it for a while (about an hour or so) and it was fine..
I believe its so slow because the system is indexing the drive, which can be a very slow process if the drive is big, has a complex folder-hierarchy, and/or is fragmented.
Does the hard-drive appear quite quickly in Finder once OS X has started up? if its slow it may confirm what I've just said.

MSI P43 won't boot with usb devices connected

My system:
MSI P43 Neo
Intel Core 2 Duo E8400
NorthQ Black Magic 850 watt PSU
Corsair 4 x 2GB ram PC2-8500 1066MHz
Seagate 320 GB hd
Hitachi 1 TB hd
Samsung 1.5 TB hd
Club3D Nvidia GTX275 1,75 GB
Samsung DVD Write Master
When i try to boot i freezes at the detecting usb devices when i have a usb device connected. It does with any usb device. But when i boot up without any usb devices connected then i boot fine and i can connect the devices right after the detection of usb devices. How can that be?

Googled on "computer not booting with usb code 6b38" and found this:
Quote
****SLOW BOOT-UP in POST SCREEN****
P.S. If you see the BIOS code 6B38 in the bottom right corner of the screen, this is a indication that USB Legancy support is enabled in the BIOS. If this is enabled and you have any usb devices attached such as a external USB Hard drive, your system will take ages to go through the POST boot screens.
So disable this setting in the BIOS and the system will then boot in a matter of Seconds
From:
http://www.rebelshavenforum.com/sis-bin/ultimatebb.cgi?ubb=get_topic;f=30;t=000250
Also try and see if a clear CMOS will help, some people suggested that from a old post from MSI forum here, saying its bios 1.3 thats bugged.
So if disabling doesnt work, perhaps down/upgrading BIOS might.

IMAC won't boot with USB card reader attached

My quite new 24" iMAC won't boot if I have a USB card reader attached:
I get to the white screen with the apple logo, but it gets stuck there and the little spinning gear below the apple logo never appears (I've waited several minutes). (In all my test cases, there is no card in the card reader.)
I've tried two different card readers with the same results ("iDOTconnect" brand and a brand new Apacer unit, both are USB2.0 multi-format card readers).
The 1st one I tried via a USB hub, the second one I tried via a new hub and also directly connected to the mac (both of those hubs work fine).
Anyone have any ideas?
Regards,
Strathglass
Message was edited by: strathglass

Hello strathglass
The same thing can also happen with other connected devices such as external HD's and iPods, the Startup Manager is lost and searching for a boot volume.
1. You may be able to fix it by going to: *System Preference / Startup Disk* and select the *Mac OS X 10.5.5 on Macintosh HD* then *Click the lock to prevent further changes.*
2. Leave those devices that cause boot issues disconnected until the iMac is up and running!
3. Only sleep the iMac, and be sure to disconnect those devices be for shutting down or updates that require a restart!
As a habit, I have always ejected and disconnected all mounted USB devices (flash driver, iPods, cameras, card reader, etc.) from my hub be for sleeping, restarting or shutting down...
Dennis

P7N Diamond (still) won't boot with USB Keyboard

Hey everyone, I have my box up and successfully running now, thanks for your help. I have 2 remaining issues. The motherboard will not post with my USB Saitek Eclipse I keyboard plugged in alone, I have to plug in a PS2 to get it through Post, then switch it out.
Also, almost every time I cold boot, I get a message that says, "Operating System Not Found." When I reboot, it works fine.
I've read through previous posts, but nothing seems to directly address my issues. Do you think the keyboard thing is a wait-for-BIOS-updates fix? Has anyone else successfully booted with a USB Keyboard on a P7N?

Quote from: h311b0y on 01-May-08, 08:19:09
Hey everyone, I have my box up and successfully running now, thanks for your help. I have 2 remaining issues. The motherboard will not post with my USB Saitek Eclipse I keyboard plugged in alone, I have to plug in a PS2 to get it through Post, then switch it out.
Also, almost every time I cold boot, I get a message that says, "Operating System Not Found." When I reboot, it works fine.
I've read through previous posts, but nothing seems to directly address my issues. Do you think the keyboard thing is a wait-for-BIOS-updates fix? Has anyone else successfully booted with a USB Keyboard on a P7N?
The only time I had an "OS not found" error was when bios for some odd reason set first boot priority to the usb port on my dell monitor as well as other usb devices before my boot drive. I changed boot priority and it went away.

W701 Won't boot with USB dongle attached

W701 with current BIOS (6KET46WW v1.12) will hang if there is a USB dongle for a Microsoft Explorer Mouse USB dongle in the upper left USB (2.0) socket on boot. Works fine if you put the USB dongle in the lower USB/eSata socket. Note that the upper socket on this 2541-W1Z is NOT a USB 3.0 port (silver, not blue). Course I don't want to put it in that socket since I like to use that for eSata... Apparently the same problem exists in the W5XX laptops as well, but I don't see a post discussing the issue on the W701.

Have you seen the thread
Hangs on boot with Logitech wireless keyboard
Yours may be a similar problem.
I'm about to get a W701 in a day or 2 and will be in the same situation. I'll check it out and report back when I can.
ThinkPad W701 25002LG, i7 2Ghz,FX 3800M, 4Gb,16GB, SSD 320GB, DVDRW, RGB WUXGA, Wacom, Col Sensor, Fingerprint reader, Mini Dock

Windows Won't Boot With USB Drives Attached

I just installed Windows 7 on my Mac mini but it won't boot into Windows automatically if there are USB drives attached. I have to hold down the option key at boot time and select the Windows partition manually for it to boot, unless I remove the USB drives first, then it will boot into Windows on its own. Does anyone know how to fix this annoying problem?

Sounds like your mini is set to boot order: boot from USB first.
On a PC you could go into BIOS and change boot order and enable/disable USB booting.
Not sure why or what is on the USB bus, type of drive and device that could also make a difference (and not be universal to the Mini)

Intel imac won't boot with usb powered hub attached

My intel imac has started to not boot with a powered (have tried a variety of them) attached. Just stops at the white screen. Also, after I attach the hubs (2, both powered) the computer got into spurts when it just kicks everything attached to the hubs off saying that something pulled too much power. At other times it is fine with the same set up. I've tried resetting the PRam but it didn't make any difference.
I see from other postings that this isn't too uncommon, but didn't see any fix.
Thanks

Can you determine if it is just one of the hubs? Resetting the PRAM probably didn't have anything to do with this problem but the SMC controls the power, try this reset:
SMC RESET
http://support.apple.com/kb/HT3964
Shut down the computer.
Unplug the computer's power cord and ALL peripherals.
Wait 15 seconds.
Attach the computers power cable.
Wait another 5 seconds and press the power button to turn on the computer.
The 5 second timing is important to a successful reset.

IMac Won't Boot With USB Keyboard Connected

We have a suite of 10 iMacs (10,1 - 21.5 inch), but one of them will not boot and has issues coming out of sleep while a USB keyboard is plugged in.
Have tried swapping the keyboard with another iMac - the other iMac still boots but the problem iMac continues to play up.
Tried plugging the mouse into the iMac's USB instead of the keyboard's.
Tried SMC reset, PRAM reset.
Re - imaged the machine from a time machine backup of one of the other iMacs, which made the issue go away for about a month... but then it returned.
Using a magic keyboard is fine as a workaround, but the users need the number pad, and if possible I'd rather fix the issue than buy a clunky separate keypad.
Does anyone have any ideas? Any help would be very appreciated!

Hello strathglass
The same thing can also happen with other connected devices such as external HD's and iPods, the Startup Manager is lost and searching for a boot volume.
1. You may be able to fix it by going to: *System Preference / Startup Disk* and select the *Mac OS X 10.5.5 on Macintosh HD* then *Click the lock to prevent further changes.*
2. Leave those devices that cause boot issues disconnected until the iMac is up and running!
3. Only sleep the iMac, and be sure to disconnect those devices be for shutting down or updates that require a restart!
As a habit, I have always ejected and disconnected all mounted USB devices (flash driver, iPods, cameras, card reader, etc.) from my hub be for sleeping, restarting or shutting down...
Dennis

BootCamp won't boot with USB-drive connected

Hi everyone,
since I installed my BootCamp partition I encounter a strange problem. I have an LG external DVD-drive connected via USB to my iMac. Everytime I try to boot Windows while the LG is connected the boot process just stops and gives me a white display. If I unplug the drive from the USB-Port everything works fine, and once windows is booted I can even reconnect the USB-drive and it works fine. But as you might understand always unplugging and plugging really gets to my nerves. I know of a couple friends who encounter the exact same problem, they also complain about this...
Also strange is the fact, that if I boot OSX the LG is connected and everything works fine...
Searched the forum and web, and wasn't able to find something usefull...
I hope there is somebody here who can help me...
Thanks in advance...
Legolas

I think your best bet is DiskWarrior from Alsoft, you'll need the CD to boot from if you don't have another boot drive...
http://www.alsoft.com/DiskWarrior/
Your best bet is DiskWarrior, you need the CD/DVD though.
http://www.alsoft.com/DiskWarrior/
But others that may work…
Drive Genius…
http://www.prosofteng.com/products/drive_genius.php
TechTool Pro…
http://www.micromat.com/index.php?option=com_content&task=view&id=31&Itemid=83
BTW, you might enjoy these DiskWarrior review/recommendations...
http://discussions.apple.com/thread.jspa?messageID=9645801&#9645801
http://discussions.apple.com/thread.jspa?messageID=10541019#10541019
http://discussions.apple.com/thread.jspa?messageID=11918925&#11918925

G5 won't boot with FW drives plugged in

I have been using a chain of five FW 400 & 800 drives for years. Today I went to lunch and came back to find my computer turned off. When I tried to turn it on, it clicks once, the little light above the power button lights for a fraction of a second, and then silence.
So I started unplugging things. My computer will boot just fine, if my chain of hard drives is unplugged from the back. They are attached on the FW 400 bus.
They are all self powered devices. Anyone have any thoughts?
Thanks,
Mark

Thanks for the help guys.
Steve, the system.log lists nothing about shutdown. There are two curious entries that are repeated a lot. The first one doesn't have a time/date stamp, but the second does.
InDesign 2.0.2(214,0xa000ed88) malloc: * Deallocation of a pointer not malloced: 0x907116c0; This could be a double free(), or free() called with the middle of an allocated block; Try setting environment variable MallocHelp to see tools to help debug
Attempt to release a printing object without first doing a retain!!!
There were lots of those. And then...
2006-12-05 18:05:22.243 SyndicationAgent[321] WARNING: BestCalendarDateFromString - can't interpret: 'Tue 05 Dec 2006 14:28:40 -800'
The only reason I put that in is that when the computer reboots after its sudden death, it gives me an error that the time is wrong and could cause problems. No idea if that is related.
Robert,
System Profiler says...
FireWire Bus:
Maximum Speed: Up to 800 Mb/sec
My five external drives are all Lacie drives of various sizes. A few are FW800 but they are all running at 400.
I'm running a dual 2Ghz with 2.5 GB RAM and 10.4.8.
Thanks again for any thoughts,
Mark
www.EncompassFilmWorks.com
G5 Dual 2 GHz Mac OS X (10.4.8) 2.5 GB RAM

Mega 180 won't boot with USB 2.0 device

Well, like a lot of others here I've managed to put the Mega Puzzle 180 together and get it working fairly well. The documentation is dismal and the included "home theater" app is not even half baked yet. The one serious problem I haven't solved yet is that the machine will hang on boot if the USB 2.0 video capture device I bought is inserted. It brings up the green/white AGP 8X screen and just hangs there. It hangs using either the front or rear USB ports, speaking of which it would be nice if they were documented properly as the front being USB 1.1 only.
Has anyone else seen this behavior ?
And if anyone is keeping track, the Toshiba SD-R5112 DVD-R drive works perfectly(as long as your remove the front bezels).
It's an interesting product that looks cool as hell, but doesn't quite work as well as it looks...
CD

Just a thought....
You can disable the Full Screen Logo in bios, and then observe where it's hanging.
On another forum, with completely different hardware/usb devices [DV Encoders] a similar problem was reported. It was found that Norton AV was constantly scanning the USB ports, assuming they were drives. Disabling Auto Protect enabled the boot process, and then were able to configure NAV to remove checking on the suspect ports [drives], and solved the problem.
May not apply in this situation......

MacBook won't boot with USB hub attached

My new MacBook stalls during the boot process when my powered, 4-port USB 2.0 hub is attached. If I unplug it from the USB port, OS X continues to successfully boot up.
Is this a known issue? The same hub works fine with my PowerBook G4.
Thanks.
MacBook 2GHz Intel Core 2 Duo | iPod 5G 60GB Mac OS X (10.4.8)

Yeah, I've already tried that. Much thanks for the reply, though.
It boots fine once the hub is unplugged. I'm just too lazy to remember to unplug the thing every time I start my MacBook. And, I'm generally annoyed because it all worked okay with my PowerBook G4.
So, anyone with a MacBook that boots up fine with a USB hub connected, what kind do you have? I need a recommendation.
Thanks.

Won't boot with usb printer plugged in!

Similar Messages

Maybe you are looking for