Won't completely restart!

I downloaded the Pandora app for my phone about an hour ago and it said it needed to reboot to finish the installation. I did so, and now it won't completely restart. It has gone to the Blackberry logo with the loading bar along the bottom at least 10 times. I put it in the charger, and I have taken the battery out twice. What is the deal?

You didn't say how long you're letting it sit there to reboot. It can take 5-7 minutes.
If it doesn't completely reboot, leave the battery out now for over five minutes, replace and try again.
If still nothing, please post back here.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • IMac won't complete restart after upgrade to 10.5.6

    I recently ran Mac OS upgrade 10.5.6, but iMac won't complete restart. After the apple appears, script appears across screen and a box appears in the middle telling me to restart my computer by "holding power button until shut down, then press on/off button again to restart. Any suggestions to try before taking machine to Apple Store?

    Thank you everyone. The correct answer was a kernel panic, and although the resolve kernel panic links above did not offer a successful solution, it was a correct diagnosis. Following the Apple Troubleshooting steps allowed me to determine that a faulty third party keyboard was the cause. Restarting with shift, restarting with 'x,' and restarting with ctrl-option-r-p did not solve the issue. Unplugging the keyboard and restarting did identify the keyboard as the culprit. Thank you all for your help.

  • GB installation won't complete, restarts between "Loading.." and "Installing" phases. Help?

    I am using my iPhone 4, iOS 5.1. When I am starting installation there is plenty of space for install (2.2 GB).. the downloading part works fine, but then after that the whole process restarts. Tried three times by now. Other apps installed just fine..

    Never mind, problem is solved. waited a few hours tried again and now it's insalling. don't know what happened and what caused it to not install earlier. oh well..

  • Computer won't complete restart process to download new itunes version

    I click restart to download the new version of Itunes and it looks as if it's about but just as it starts to download it goes to the homepage of where I login to my account and doesn't download.

    my accounts match up and I still can't get rid of the update icons on the MBP. iPad shows no updates available (they are old iPhone only apps)
    The only thing I did was buy a new MBP and transfer the iTunes library.

  • HT1338 Why won't my MacBook Pro completely restart?

    When I have installed updates to my MacBook Pro and select to restart my laptop it will not completely restart. The system starts the process but never completes it so I end up having to shut down my laptop. Is there a way to fix this?

    You can try VLC, I belive it supports playback for AVCHD. It I am wrong, it's free, so no harm no foul. You can find it and videolan.org.
    As for iMovie, it should recognize AVCHD, unless your camera has some sort of new or proprietary version of the AVCHD codec, in which case you can only cross your fingers and hope Apple updates iMovie as there is no codec plug-in architecture to expand iMovies native support.

  • After installing latest update, iMac won't complete startup

    It gets to the gray screen with the apple logo and spinning disk, and stays there. It won't let me boot from the install disk, so I can't try a reinstall. I thought I might be able to load Disk Utility via Unix (which I can get to) and repair the permissions, but that doesn't seem to work either (though I don't know Unix well so that could be my fault).

    Hi
    Anything unusual happen during the 10.5.3 update installation phase?
    What type of iMac are you using? Your tag says G5 but also Intel core processors - it can't be both.
    Try this:
    -First unplug your computer and wait 10 minutes
    -Next, simultaneously reinsert the power cord while pressing the power button for 5 seconds then release
    -Press the power button again to start the computer - this resets the computer's system management unit (SMU) which controls your machines power functions.
    -Next, press/hold down the P/R/option/command keys for 3 Apple chimes. This clears the machine's PRAM. After the 3rd chime release those keys and immediately hold down the Shift key to put the machine into Safe User Mode
    -If you get to a log-in screen (may take several minutes as repair functions are occurring on the boot), log-in. When the login is complete, restart the computer as usual.
    If no go, I suggest taking the machine to a certified Apple tech, or if you live near an Apple store to the Genius Bar.
    Post back
    Message was edited by: Hawaiian_Starman

  • After download of Firefox 18, computer completes restart, computer comes back up but no Firefox.

    I downloaded the Firefox 18 update. Computer goes to restart, completes restart but no Firefox.
    There is no longer an icon on the desktop. I have tried doing an uninstall through the Control Panel, I get a message that says I must restart computer, I do the restart and no Firefox anywhere. I tried to just delete the program by going into the Program Folder and it won't delete.
    I tried to do fresh downloads over 10 times and no luck! What should I do now?

    Do a clean reinstall and delete the Firefox program folder before reinstalling a fresh copy of Firefox.
    *(32 bit Windows) C:\Program Files\Mozilla Firefox\
    *(64 bit Windows) C:\Program Files (x86)\Mozilla Firefox\
    *http://kb.mozillazine.org/Installation_directory
    Download a fresh Firefox copy and save the file to the desktop.
    *Firefox 18.0.x: http://www.mozilla.org/en-US/firefox/all.html
    Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
    *Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you will also lose your personal data like bookmarks and passwords from profiles of other Firefox versions.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    *It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    *http://kb.mozillazine.org/Uninstalling_Firefox
    Your bookmarks and other profile data are stored in the Firefox Profile Folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
    If you keep having problems then also create a new profile.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    *http://kb.mozillazine.org/Profile_backup
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • Active Screen Corners stop working without complete restart

    Since I installed Snow Leopard, I've noticed a problem with my active screen corners not working. I usually only completely restart once in a while, so I usually just shut the lid at night (or when I go anywhere). with 10.5, it used to be that active screen corners always worked when I did that, but since I installed Snow Leopard, active screen corners quit working. I have to completely restart to get them to start working again.
    Is there a way to fix this, or is it a bug?
    Thanks.

    I tested this with a few system applications, if it helps anybody.
    It also might be interesting to note that in all cases where expose won't trigger, the dock won't unhide by holding the mouse at the bottom of the screen either so long as any of the non-working applications are selected.
    List of applications that also have this problem on my system:
    Textedit
    Activity Monitor
    iChat
    Calculator (Unlike the other applications, the active corners don't even work on this the first time)
    List of applications tested that are NOT having this problem:
    iTunes
    Safari
    Terminal
    Mail
    Address Book
    Photo Booth
    QuickTime
    Automator.
    Does anybody know if the applications that are not working have anything in common? Conversely, could anybody confirm that they are NOT experiencing this problem, and that it is specific to certain system configurations, or perhaps even my system?
    Thanks in advance,
    Kevin

  • My iPhone 5 won't complete the sync with my PC...

    my iPhone 5 won't complete the sync with my PC, says "waiting for items to copy (step 6 of 6)".  have left the PC and phone connected for up to 15 hours one time, and the status never changes.

    I figure it out. Somehow, in my Advanced settings, password was somehow "de-selected" as my Authentication setting in Incoming Selections. I re-selected it, and now everything is back to normal...

  • TS1559 I have done all of the steps that Apple have said to do, including completely restarting my phone and registering it as a new one, but still my wifi is greyed out, can anyone help me?

    I have done all of the steps that Apple have said to do, including completely restarting my phone and registering it as a new one, but still my wifi is greyed out, can anyone help me?

    http://support.apple.com/kb/ht5621

  • Mobile account won't complete setup, initial sync won't complete.

    I'm trying to setup a mobile account but it won't complete the sync process on the client MacBook Pro. Both the server and the MacBook Pro are running 10.5.5.
    When I login to client it prompts me to create a Mobile account and proceeds with the sync to create the account, but when the sync is complete it just logs in with the default account setup. None of the user files or settings (desktop image, preferences, etc) appear. The sync process says "Checking..." for all the files that supposedly get copied to the client, but it looks like it doesn't complete.
    Is there a way of knowing what the problem is? Is there an issue with the user's home directory, some file that prevents the sync and mobile home creation from completing?
    Thanks.

    Forgot about getting this problem solved.
    The user account that had this trouble had a copy of his home directory from a laptop in his home directory. This backup had it's own Library folder which was confusing the Mobile account sync process.
    When I removed the backup home directory, the initial sync went fine.

  • My iPad won't stop restarting itself since it died and i plugged it in, what's wrong with it?

    My iPad died and i plugged it in and now it won't stop restarting itself, it goes apple logo, loading, shut off and then it repeats itself. I thought that maybe the iPad got just enough power to start restarting but then died midway through and that just kept continuously happening.

    Try a reset: Hold down the power and Home buttons together until the Apple logo is displayed, then release. No data or settings are lost.

  • I downloaded the latest version but it won't complete installation.  It says:  Verify that you have sufficient privileges to start system.  What do I do now?

    iTunes stopped working so I uninstalled it.  I downloaded the latest version but it won’t complete installation, giving me  a message that says: Service ‘Apple Mobile Device’ (Apple Mobile Device’) failed to start.  Verify that you have sufficient privileges to start system. Can anyone tell me what to do next? Thank you.

    I tried your suggestion, and what I get is this message: "Error 1053 the service did not respond to the start of contro request in a timely fasion." Any further suggestions? Thanks

  • Been trying to update My iPad software to iOS 7.0.3,  download won't complete it's been 2 days, some apps also won't complete downloading

    Been trying to update my software to iOS 7.03 but it. Won't complete, it's make some apps stuck too, please help

    You can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
    Try again to see if the problem persists.
    If that doesn;t work, you can try updating through iTunes.

  • I've downloaded Lightroom 5.6 today but it won't completely load before windows pops up and says that it has encountered a problem and is shutting the application down. What is my next step....thanks?

    I've downloaded Lightroom 5.6 today but it won't completely load before windows pops up and says that it has encountered a problem and is shutting the application down. What is my next step....thanks?

    If you use extensions like <i>Adblock Plus</i> or <i>NoScript</i> or <i>Flashblock</i> that can block content then make sure that such extensions aren't blocking content.<br />
    You can see the installed Firefox extensions in "Tools > Add-ons > Extensions".
    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

Maybe you are looking for

  • How to transfer content to new iCloud account?

    I have a friend who had her iPhone with the iCloud account setup with her son's Apple ID/account. The son has been kicked out. The iPhone/Apple ID associated with the iCloud account as well as all the things that go with the Apple setup are all assoc

  • ITunes is empty, how do I get my files back into it?

    This morning I was trying to clean up my Macbook, get rid of applications I'm not using, clearing caches etc. (Everything was seeming to run a bit slow - which prompted the attempt to clean up unnecessary stuff) Something ended up happening with my i

  • No mapping program found - scenario soap to file

    Hi all, I'm developing a PI scenario Soap to file and I have a following problem. My source is a third party System and my target is a ECC 6.0. I have created two data type, only different in one value. When tried to check my scenario, I obtain this

  • Too many responses (!)

    I recently posted two questions in the forum, later I received over 100 replies (about 105 I think) in my e-mail, most of which were not related to my question. I don't know if I did something wrong, checked something I shouldn't have or what - I am

  • Latest version of Acrobat

    How can I test what version of Acrobat reader is installed on my users computers. I have a rather large user base and need a link or something that sends me the version installed.